blister machine used for sale

Maximum width of forming film : 160 mm Forming area : 150 x 125 mm Maximum forming depth : 15 mm Mechanical output : 100 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 500 mm Reel of lidding film : 300 mm Inlet air pressure : 6-8 bar Feeding : Manual(can be automatic) Forming type : Vacuum

Maximum width of forming film : 150 mm Maximim forming depth : 12 mm Mechanical output : 65 cycles per minute Output of blister : 300 blisters per minute Reel of thermoforming film : 450 mm diameter Reel of lidding film : 250 mm diameter Air consumption : ca. 10 Nm3/h Operating pressure : 6-7 bar Cooling water : 0,12 M3/h power consumption : 12 Kw Weight : 1600 Tablet feeding system : Dedicated feeder for 3 differents tablets color Camera system with automatic discharge

Full documentation and technical file. Photos of unit installed available. Previous environment: pharmaceutical Possibility to buy module 1, 2 and 3 separately. Large stock of spare parts for all equipment. Regular maintenance and upgrades performed a few years ago. 1 - Capsule conveyor Manufacturer: IDI Pharma Feed hopper + slat conveyor + distribution hopper 2 - Blister machine Manufacturer: Marchesini Model: MB 440 Year : 1991 Use : blistering machine for tablets, capsules, pills, ... - 1 reel magazine - 1 film splicing table - 1 preheating and cell-forming station - 1 vertical feeder - 1 blister filling control station - 1 thermoformed film covering station - 1 welding station - 1 numbering, perforating and die-cutting station - 1 cut blister removal device Maximum pitch: 180 mm Maximum thermoforming film width: 280 mm Max. outer diameter of t ...

Economical blister machine with a quick format change unit for more flexibility. Universal feeder for handling of almost all types such as capsules, flat tablets, oval tablets, capsule tablets, triangular tablets or other various shapes. Adjustable sealing pressure for different product requirements. The machine is additionally equipped with a film waste material trimming cutting device which allows production runs of approximately 90 minutes. Integrated camera inspection systems (pinhole detector, BASLER color camera) automatically eject defective blisters and ensure the quality of the blister packs. Two holding devices for two blister film rolls and the integrated blister film splicer increase efficiency during material changeover. The length of the final blister is adjustable by software. Including water chiller system, 1 x aluminum format set with dedicated feeder, aluminum/PVC forma ...

Blister machine for the blister pack in PVC / ALU and PVDC / ALU with mechanical transfer of the forming material by means of clips of intermittent complete movement of: Support for the foil of the forming material. Digital thermoregulators at controlled limits. Preheating station with easily replaceable plates treated non-stick. Formation station with "rotary" movement Welding station with "rotary" movement Limiter of the cooling water circuit when the machine is stopped. Sealing material foil holder Internal diameter 70-76 mm External diameter maximum 300 mm. Transfer system from the blister of the cutting die to the blister magazine. Motorization with self-locking three-phase motor with variable speed through inverter. Vacuum pump dry air pressure and air control Protection in plexiglas with safety microswitches. Controls of minimum level foils sealing and formation materials, with a  ...

Features: • Format range 100 x 153 mm • Output max 240 Blister/min (depending on product and format) • Drawing depth max. 12 mm (max. 24 mm after conversion) • Punching station output max. 60 cycles/min. • Pre-draw max. 125 mm • Plate sealing • Forming film rigid PVC, PVC/PVDC (Alu forming optional) • Film width max. 170 mm • Film thickness 0.1-0.35 mm • Sealing film aluminum • Perforating station • Batch embossing • Forming with air pressure • Blister transfer with bad ejection • Without format parts • Connection 380V/50Hz This blister machine has been mechanically overhauled in our specialist workshop. The entire electrical/pneumatic system has been renewed. The machine control system was equipped with the latest control technology. The following parts were replaced: • PLC B+R X20 with Automation Panel 12.1 WXGA TFT, system unit PPC3100 • Serv ...

2002 Blister machine Marchesini MB 440 for PVC - ALU. from 1992 Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 305 from 2002 • Continuous movement machine • Automatic blister feeding GUK leaflet folder Bar code reader Booklet feeder System coding for the cartons Range of work min. 25 x 15 x 65 mm Max. 100 x 85 x 150 mm • Speed up to 240 cartons per minute Check weigher Garvens S2 from 2000

Universal blister machine in the medium to high-speed category. Suitable for processing tablets/coated tablets in corresponding blister for Alu/PVC, or Alu/Alu foils. Machine is fitted with a Simtap-feeding system. Output: up to 600 blisters/min. The blister machine is in line with the cartoning machine, type C2205.

lister machine Marchesini MB 440 for PVC - ALU from 1994. Up to 56 cycles per minute and 448 blister per minute . Inspection camera . Automatic feeder for tablets Cartoner for blister Marchesini Model MA 355 from 1994 Continuous movement machine Automatic blister feeding Check weigher Garvens S2

Uhlmann UPS5ET blister machine for alu/alu blisters, including Uhlmann 149 buffer system. Maximum blister size 272 x 284mm (draw x width), maximum depth 40mm. SyPro feeding system for syringes etc with flexible robotic arm and vacuum grip head. Seidenader camera product presence checking system, VISIOtec VisoScan blister integrity tester, gas flushing with Dansensor MAP Check Combi for measuring the gas content within the pack. Domino D550+ laser printer with Seidenader print control camera. Output up to 400 blisters per minute. As new, with only 350 production hours.

Marchesini MB430/MA305 blister line for tablets, capsules, etc. with blister machine model MB 430 for PVC/ALU blister, capacity up to 95 cycles per minute, maximum forming depth 9.5 mm, ROBOCOMBI robotized transfer of the blisters into the infeed of a horizontal cartoner model MA 305, continuous motion, carton size range min. 25 x 15 x 65 mm (AxBxH), max. 100 x 85 x 150 mm (AxBxH), capacity up to 240 cartons per minute, GUK flat sheet leaflet folder from stack, bar code reading of carton, leaflet and presence of leaflet inside carton, flap cosing for variable data (expiry date, batch no., etc.), reverse tuck closure.

Complete single-lane blister machine suitable for oral solids. System incl. Aylward product feeding system, Scanware color filling control etc. Output: up to 250 blisters/min The line is in line with the cartoning machine type P3000. Complete single lane blister machine suitable for oral solids. Machine comes with Aylward product feeding system, Scanware color-will controller etc. Output: up to 250 blisters/min. The plant is in line with the cartoner type P3000.

Used blister machine made by Empak, model PRS1. New 1999. The machine is designed for forming nests in PVC foil, packing dragees or tablets into them, closing them with laminated and heat-sealable foils, punching ready-made packages in the form of blisters with their simultaneous marking. Number of blisters across the width of the foil: 1-2. Number of blisters formed in a flat die: 1-4. Stroke: 70-140mm. Molding depth: max 12mm. Forming die area: 130x130mm. Blister dimensions: along the direction of film movement: 25-100 mm perpendicular to the direction of film movement: max. 120mm. Capacity: 60-80 blisters / min. Overall dimensions: L x W x height 2500x900x2000 mm. Weight: approx. 1000 kg. Manufacturer's technical documentation available.

USED BLISTER PACKING MACHINE REF.: E0011 Description: SIEBLER HM1 1/160 blister packing machine manufactured in 1997 by ROMACO. With a power of 6.5 kW.

Blister machine Manufacturer Uhlmann Type UPS 1070 Power 15 – 200/cycle min. Film width min. 150 mm – max. 300 mm including color and filling material control, scanware, type LYNX Spectra CL/HR Blister machine with side channel blower 2016 new sealing head with adjustment dome

Blister machine Manufacturer: Uhlmann Type UPS 1070 Output 15 – 200/cycles min. Film width min. 150 mm – max. 300 mm including colour and product control, made by Scanware, type LYNX Spectra CL/HR Blister machine with side channel blower 2016 new sealing head with adjustment dome Dimensions: 8000 mm length x 1800 mm width x 1900 mm height, weight approx. 7 to

Universal Blister machine with platen sealing for pharmaceutical production incl. various format parts and LYNX-5-fill control. The machine processes ALU/PVC blisters and is suitable for tablets, dragées und capsules. The forming an packing machine operates in single stroke (ET), i.e. all stations for the main functions forming, sealing and punching operate in the same cycle, while the film runs through the machine intermittently. Output: 15-50 cycles/min. at 12 mm forming depth | 15-40 cycles/min. at 28 mm forming depth.

Blister machine Harro Hoeflinger model PFM 1 year of manufacturing 1992 . the machine has universal feeder , camera for product control . The machine has the following formats dimensions o blisters : 70 x 115 mm / 56 x 96 mm / 62 x 94 mm / 74 x 123 mm / 123 x 60 mm / 45 x 92 mm / 100 x 86 mm / 106 x 75 mm / 56 x 110 mm / 70 x 98 mm

Used blister machine for PVC / alu blisters, produced by EMPAK Kraków, model: PFR-7n. New: 1994. Marking blisters with an inkjet printer.

Blister packing machine,Esmatic M-1 SR,roundtable type.

Blister machine for vials Manufacturer: Uhlmann Model No.: UPS4 Year of construction: 2000 Serial Number: 460 Bottles, Carton Packaging 2 bottle feeders PACCONTROL PCL Production capacity: • 15 to 50 cycles/min up to a punching depth of 12 mm • 15 to 40 cycles/min up to a punching depth of 28 mm Maximum feed length: 222 mm Format range: longitudinal 220mm x transverse 284mm

Thermoforming machine TLT 2600 PP-film max. 260 mm Usable web width max 245 mm ( strip length max. 120 mm ) Strip configuration 2 lane , across Indexing max. 212 mm Depth of draw max. 10 mm Film speed max. 13 m/min Cutting die max 300 cycle/minute (or 600 blisters/min) Forming station max. 110 forming cycles/min Including inspection camera Leatus

Thermoformer - UPS4 Year - 1993 Min. - Max. Forming width - 62 - 226mm Cycles - 15 - 50 cycles/minute Forming depth - PVC - 12mm ALU - 10mm Blister Format - Min. - 60mm Max. - 140x39mm Punching Area - Length - 226mm Width - 284mm Forming Film width - Min. - 100mm Max. - 298mm Lidfoil Width - Min. - 100 Max. - 298 Tooling - PVC/Alu - 6 Blister line size 39x94mm Alu/Alu - 7 Blister line size 38x86mm Machine Control- PacControl version 2.17 Camera – not included Hapa Printer - H-231-1

Power installed :11 Kw. Power consumption :5,5 Kw. Production :15, 50 strokes per minute for 12 mm depth forming 15, 40 storkes per minute for 28 mm depth forming Index :Max. 145, 222 mm Format range :forming area 220 mm length 188mm width Depth forming :12 and 28 mm, forming reel : 460 mm, covering reel :Max. 300 mm Forming thickness :Min. 0,1 mm, max. 0,5 mm Width covering foil : min. 90mm max. 210mm, of the internal reel : 70..76 water consumption :aprox. 0,1 m3/h. Compress air consumption :aprox. 6 Nm3/h , without pre heating :aprox.14Nm3/h, with pre heating

Manual Blistering Machine TOMMY NIELSEN 501 FSX Year: 11-12-2009 CE Marked: YES Model: 501 FSX Voltage: 3x400/230V Frequency: 50 Hz kW: 3.5kW Bar: 7.0 Serial No: 20091102 Format: -11.8cm x 27.5cm -19 cm x 27.5 cm -2x (11.5cm x 12.2cm) below Price: 12500 eur (FOB)

Blister and paper welding machine

BLISTER PACAGE FORMING MACHINE LIMPIR Machine is in perfect working condition We use machine durring production of switch production paccaging switches.

Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across  ...

The automatic Blistering machine Partena CAM mod. M90 is a machine specially designed to face the problems of packaging of pharmaceutical products such as: vials, bottles, phialoids, capsules and tablets. The machine is pneumatically operated, the working cycle is obtained by the following workstations: preheating station, forming station, product loading plan, cutting station, covering station. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. The Blistering machine is equipped with a stainless steel elevator mainly used for elevating and loading products onto the receiving tray. The products are collected from the tray elevated, pre-sorted and fed to the top towards further feeding unit until they reach their des ...

C260 is the most compact deep draw thermoforming machine in his range keeping the maximum customisation that exactly meets the customer's production requirements. All this is possible thanks to the use of the IMA Safe technology which has developed robotized systems applied in the most critical areas: the product feeding area & the connection to the cartoner. Size changeover operations are rapid thanks to a reduced number of size parts. Technical data: Length mm 6000 Width mm 1530 Height mm 1850 Net weight Kg 2500 Frequency Hz 50 Voltage Volt 400 Production characteristics: Forming Depth 3 – 40 mm Production speed: up to 800 1-2 ml DIN ampoules/min up to 400 1 ml syringes/min Chiller dimensions 480 x 470 x 960 mm Film trolley dim. 860 x 800 x 1130 mm Additional format available 8 ampoules Format currently installed is for blister of 5 ampoules.

Used blister packaging line CAM Italy in the years 2002 and 2003 (desription of all machines in the line below the photos) consisting of: blistering machine, cartoner and wrapper, chiller. The line is currently installed and in excellent working condition. Professional desmantling, packaging and shipment is available upon request (at additional cost). Used line for packing tablets (or capsules into blisters, blisters into cartons and wrapping. Manufacturer: CAM. The line includes: Blistering machine made by CAM Italy model M92X Year of manufacturing: 2002 Capacity: 30-35-40-45 cycles per minute Maximum stroke: 180 mm. Maximum foil width: 286 mm. Maximum filling depth: 12 mm Overall dimensions: L 4700 x W 2020 x H 2890 mm Hour counter: 14600 hours. Full technical documentation available. Videos of warking machine available machine upon req ...

This Blistering machine is characterised by fast and easy size change, precise reproducibility of all parameters, production safety for product and packaging material by indirect tool temperature maintenance at forming and sealing station, functional safety by cavity centering with roller web transport. Product feed by means of linear feeder, positive blister transfer without chain transport system. Available format sizes: – 14 tablets for blister: oval tablets size 26,5 x 12 x 10 mm, blister size 142 x 63 mm; – 6 tablets for blister: round tablets size 13 x 13 x 7 mm, blister size 120 x 53 mm; – 6 tablets for blister: round tablets size 12,5 x 12,5 x 7,5 mm; blister size 120 x 63 mm; – 15 tablets for blister: oval tablets size 27 x 12 x 10,5 mm; blister size 112 x 90 mm. Installed format size: – 10 tablets for blister: round tablets size 16,5 x 16, ...

Equipped for ALU/PVC and ALU/ALU operation • Blister format range (W x L) min. 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Capacity 15 - 50 mould cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Moulded foil Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamps • Cover film Ø max. 240mm, core Ø 76 mm, pneumatic clamp • Glue joint detection for moulded and sealing film • Product feeder Uhlmann SimTab 2.1 for tablets/capsules • Feed according to moulds and seals • Print image control with cover film stretching • Crack and pore control moulding film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC molding film • Heating station with suction for the use of PVDC foil • Mechanical forming station for ALU moulded foil • Contents control VisioChrom color wit ...

• For PVC/PVDC-Alu • Output max. 50 forming cycles/min, max. 200 punching cycles/min, max. 600 blisters/min • Max. Format range (feed x width) 220 x 284 mm • Feed single cycle max. 222 mm • Feed rate multi-cycle max. 90 mm • Max. punching area lengthwise x crosswise 220 x 284 mm • Forming depth max. 12 mm • Automatic vibratory feeder 12-lane for oblong tablets/capsules • Uhlmann MC programme control • 1 tool set for oblong tablets/capsules • Drive 15kW/380V/50Hz Optional retrofit/overhaul/modernization: - PLC B + R X20 with Touch Panel PPC2100, new - Servo drives, new - Foil take-off by linear servo, new - Electric installation, new - Mechanically outdated - Pneumatics, new - Cooling, new - Protective coating, new - Varnish, new Further options: - Feeder: Brush box, directed feed e.g. SimTab or linear guidance - Format replacement acco ...

• Set up for ALU/PVC operation • Output 15-50 forming cycles/min, max. 100 punching cycles/min, max. 400 blisters/min • Format range and die-cutting area max. (feed x width) 220 x 188 mm • Drawing depth max. 12 mm • Vibratory feeder with brush box for tablets/capsules • Product inspection from underside of blister with colour camera Scanware Lynx-Spectra HR and own PLC Bachmann MX 207/DIO 248 for error carry-over (retrofitted in 2010) • Roller stand • Perforating station • Film monitor • Bad ejection • Ejection counter control • Vacuum pump • Waste cutter • Transfer belt to cartoner • Electronic cam control Digitronic CamCon • MC control system • Drive 220/38V/50Hz • Without format tools

Set up for ALU/PVC and ALU/ALU operation • Format range blister (W x L) min 50 x 22 mm / max. 156 x 115 mm • Drawing depth max. 12 mm • Output 15 - 50 forming cycles/min • Transport length 42-115 mm • Film width 100-168 mm • Forming film Ø max. 450 mm, core Ø 76 mm (PVC) / 150 mm (ALU), pneumatic clamped • Cover film-Ø max. 240mm, core-Ø 76 mm, pneumatic clamped • Adhesive bonding point detection for sealing and forming film • Product feed by deticated feeder Uhlmann SimTab 2.1 for tablets/capsules • Forward feed after forming and sealing station • Tear and pore control for forme film and cover film Visiotec VisioScan MT-160/200 • Forming station with compressed air for PVC forming film • Heating station with extraction for the use of PVDC film • Mechanical forming station for ALU forming film • Filling control VisioChrom color with separa ...

• Blister size length 28 mm, blister width 100 mm, • Drawing depth 12 mm • Output knife 15-90 cyles/min • Sev. tool sets for blister size 28 x 100 m for capsules size 0, 1, 2 and 4, tablets and suppos (listing see photo), manual product feeding • Counter • IQ-OQ-documentation on French • Machine has no common punching tool but a lateral knife, connection 380V/50Hz This machine is offered at a special price and is sold as is - were is, without technical inspection.

Used blister and cartoner by IMA type. C80/A81; New: 2000; Available formats: 1.PVC/ Al thermoformed dim. blister 83x56 with 10 tablets, cardboard box …601886, 602586, 603586 604586, Foil 176/183 2. Thermoformed PVC/Al dim. blister 83x56 with 6 tablets 3.PVC/Al thermoformed dim. blister 96x66 with 10 tablets cardboard box …7018104, 7025104, 7035104, 7045104, 7058104, Film 209/213

BLISTER LINE ROMACO NOACK (BLISTERING MACHINE + CARTONING MACHINE) Year of construction: 1998 Blister packing line consisting the following two machines, both electrically upgraded in 2020 with new PLC and HMI. Noack 920 blister packer: Maximum draw depth: 12 mm Maximum foil width: 160 mm Maximum capacity: 80 forming strokes per minute Blister collation system for feeding into the cartoner Automatic tablet track in-feed system Tablet feeders into brush box Suitable for packaging tablets or capsules into Alu/Alu or PVC/Alu blisters Variable speed Laetus vision system Vacuum system HAPA H-226-C printer Romaco Promatic P150 fully automatic horizontal intermittent cartoning machine: High production speed, format change without tools Carton dimensions: minimum: 20mm x 15mm x 60mm; maximum: 100mm x 85mm x 150mm Minimum carton dimensions: 20mm x 15mm x 60mm Ma ...

Heating output: 22.15kW, motor power: 2.5kW, max. compressed air supply: 10bar, including spare parts.

Moulding depth: 12mmm, working area: 100x70mm, max. coil diameter: 250mm, speed: 1-30 cycles/min, with documentation, the machine was never used.

Blister format: 70x110x13mm, output: 10-50/min, the machine was never used.

Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used.

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

Blister packaging line consisting of: Thermoforming blister machine Uhlmann UPS 1030 MTI and folding carton packaging machine Uhlmann C 2205. Major service 2014 by the manufacturer. Thermoforming blister machine UPS 1030 MTI (multi-cycle intermittend): • Set up for ALU/PVC-PVDC-PP aclar operation / Alu/Alu cold forming prepared • Output punch max. 210 cycles/min • Output max. 600 blisters/min • Feed rate max. 144 mm • Blister width max. 255 mm • Drawing depth max. 10 mm • Roller stand • Dedicated feeder (standard feed channel vertical) for tablet / capsules • Sealing roller and preferential roller cooled • Product inspection with CCD colour camera VisioChrom retrofitted in 2014 • Compact station with embossing, perforation, die-cutter • Reject station for partially filled/empty • Transfer conveyor to cartoner • Control Beckhoff IPC with HMI  ...

USED PRECISION GEARS LTD TR-100 BLISTER BACKAGING MACHINE REF.: E0034 PRECISION GEARS LTD blistering machine to blister tablets, capsules, dragees, etc. For PVC / Aluminum blister Model TR-100 Year 2000 Batch marker for incision, pre-cut, cut, Production of 50/60 strokes per minute, depending on the selected blister size, up to 240 blisters per minute. Maximum format size 190x130 mm. Current format blister of 10 capsules of 170x 100 mm General characteristics: Manufactured by PRECISION GEARS LTD Model TR-100 Year built 2000

IMA-PG TR100 blister machine for tablets and capsules in PVC/Alu blisters, output up to 140 blisters per minute. Blister size range from 30 x 60mm up to 128 x 150mm, and up to 12mm deep, currently fitted with tooling for blisters 60 x 140mm. With Laetus checking system. With Multipack F42 blister stacker & stretch bander, up to 40 stacks per minute.

CSAT printing system for blister film coloured printing. Unit is suitable for printing counterfeit-proof solutions for pharmaceutical packaging. Resolution: 1,200 dpi, output: 0.5 to 20 m/min.

Scanware Blister Control System: - Screen EM TFT 15" - Camera system DOM-323/SU/4C (with 3x camera JAI CV-M71CL) - Product recognition system LYNX-Spectra - Multiplexer MUX-3 3xCL - White light LED lighting LEDW-Po3/S5 - Lighting attachment ES-323 - Light panel KAN-303 - Network and I/O module S02

• Set up for ALU/PVC-PVDC-ACLAR, 1-lane • Plate forming, roller sealing • Output max. 350 blisters/min, max. 175 cartons/min • Moulding area blister in running direction max. (W x L) 180 x 140 mm • Blister width 30-90 mm • Blister length 60-140 mm • Drawing depth 3-12 mm • Folding carton dimensions (W x L x H) 35-95 x 65-145 x 12-100 mm • Hapa 230-T-1C-LR flexo printing unit, unused • Directional feeder (Sombrero) for tablets / capsules • Brush box feeder for coated tablets and film-coated tablets • Sealing pressure control • Print mark control cover film • Blister embossing station • Blister perforating station • Integrated cooling device • Product inspection with colour camera (1024-800 pixels) and code reading by IMA Antares-Vision system • Code reading Pharma Code, Data Matrix, EAN, etc. for 2x leaflet, leaflet presence, folding carton • Refill  ...