blades used for sale

Shredder mill with blades Brand: Mateu & Solé, model: B-25, cutting chamber: 680x380 mm, motor: 25 hp. Stepped rotor and electrical panel.

Storti PS 430 medium-size wood cutting line - Italian production - max length of wood 6000 mm - minimum length of wood 2000 mm - wood diameter min / max 100 / 350 mm TECHNICAL PARAMETERS: 1. CUTTING THE PRISM PGS 2004 circular saw Minimum log length 1000 mm. Maximum log length 6000 mm. Maximum log diameter 350 mm. Minimum log diameter 100 mm. Maximum ground clearance 400 mm. Disc diameter 600 mm. Saw hole diameter 40 mm. Saw blade speed 2000/2500 RPM Feed speed 4-35 m/1 min. Spindle motor power 2X37 2X44 KW The opening and closing power of the saw blades is 0.75 KW Log feeding power 4 KW Number of programmable memories for cutting sizes - 9 TGS 84 V double crosscut saw Maximum board width 350 mm. Minimum board width 100 mm. Minimum board height 40 mm. Maximum board height 200 mm. Feeding engine power 0.75 KW Feeding speed 42 m/1 min. Minimum cutting leng ...

The Colombo AM 60, crafted in 2006, is a specialized woodworking machine built for precision and versatility. With a 4kW cutting unit, it accommodates 400/500mm blades, achieving speeds of 3000 rpm. The cutting heights reach 100mm with a 400mm blade and 155mm with a 500mm blade. An 11kW pinning shaft, with a diameter of Ø50mm and a length of 600mm, supports tools up to 300mm. Its advanced feeding system, rated from 5.5kW to 15kW, adjusts electronically. Contact us for further details.

Description Folcieri GRANULATOR Rotor Diameter 530 Rotor Length 1000 Hopper dimension 1000 x 700 Knives 3 + 2 Screen 12mm Motor 110 kW Fan Soundproof booth 3 spare set of blades and acounterblades

Shredder mill with blades Brand: Navarro, cutting chamber: 500x450 mm, motor: 30 hp. Extraction of side grille, water-cooled bearings and electrical panel.

Shredder mill with blades Brand: Mateu I Solé, model: B-10, cutting chamber: 450x280 mm, motor: 15 hp. With three-angle star electrical panel.

Description Granulator complete with mill, vacuum cleaner and big bag filling structure. Number of blades: 3 + 2 fixed Rotor diameter 500 mm Knives length 800 mm Cutting chamber dimensions: 800 x 750 Size of the mouth: 700 x 650 Motor power 30 kW

Shredder mill with blades Brand: Prat, model: P-4, cutting chamber: 600x420 mm, direct motor: 37 kw (50 hp). Open rotor, inclined cut. 980 rpm

Soriano brand crusher mill with blades, cutting chamber: 495x340 mm, motor: 7.5 Kw (10 hp). Step rotor, magnet in hopper. No electrical panel.

Description Motor: 30 kwWorking hours: about 50open hopper: 1500 x 150height of the feeding hopper: 1700 mmNo. of mobile blades: 5cutting profile width: 1500 mmGround material: polyethylene sheet (LDPE)Weight: 3500 kg

Shredder mill with blades Brand: Prat, model: P-2, cutting chamber: 350x300 mm, motor: 11 Kw (15 hp), open rotor, soundproof hopper, year: 1990. With electrical panel and manual with safety certificate.

Shredder mill with blades Brand: Mateu I Solé, model: B-40, cutting chamber: 710x520 mm, motor: 40 hp. Step rotor, flywheel, vacuum cleaner: 4 Kw (5.5 hp). With electrical panel.

Hosokawa Alpine Cutting Mill Rotoplex 20/12 RO, year of construction 1993, universally applicable Specifications Manufacturer: Hosokawa Alpine Type: 20/12 RO Year of construction: 1993 Motor power: 1.5 kW Speed: min-1 750 Number of rotor blades: 2 Number of stator knives: 3 Sieve: Weight: 110 kg Including replacement screens in different sizes and spare knives. Complete technical documentation available.

Shredder mill with blades Brand: Mateu I solé, model: CB-M20-BR, cutting chamber: 450x250 mm, motor: 15 kw (20 hp), soundproofed, open rotor, inclined and stepped cut. Vacuum cleaner: 1.5 kw (2 hp)

Shredder mill with blades Brand: Navarro, motor: 30 hp, cutting chamber: 450x400 mm, electrical panel. With opening and closing, hydraulic hopper and soundproof hopper.

- Exhibition machine -saw blade guide above, saw blade guide below, quick clamping device via eccentric lever---------- Technical data ---------- rolls: 430 mm, max. cutting height: 270 mm, max. cutting width with stop: 370 mm, max. cutting width without stop: 410 mm, max. belt length: 3,345 mm, table size: 610 x 431 mm, table inclination: -10 - +45 , motor 400 V: 1.5 kW, suction nozzle : 2 x 100 mm, Cutting speed: 900 / 450 m/min., dimensions (LxWxH): 768 x 512 x 2,048 mm, weight: 130 kg Scope of delivery: 3 band saw blades 6 / 16 / 25 mm ; new exhibition machine

Circular saw Magic SIM 30 Worktop 800x700mm Cutting height 85mm Maximum saw size 300mm Cutting on the right side max 700mm Manual lifting and lowering of the saw Tilting cutting unit at an angle of 45 2.2kw motor Two speed variable saw blades Extraction connection 125mm

State of the machine: Excellent, after a full renovation Device characteristics: Capacity: about 300 kg of dough per hour, Dough up to 80% water content, Moving speed of the dough ribbon max. 1.5 m/min., Dough ribbon width up to 170 mm, Quick row alignment with easy-to-move rotary blades, Possibility to supply double-sided grain sprinkler (optional), Machine made of stainless steel. Warranty: 6 months of parts warranty - worldwide

Complete laundry for PET, PVC or PS in stainless for some: 500 Kg / hour. Composed of: -Reception and densing raft: 1,500 mm x 500 mm, with two blades. -Collection and stirring pond: 1,500 mm x 1,500 mm. With emptying valve and outlet belt to centrifuge of canjillions. -Centrifuge: 3,000 r.p.m., 12.5 c.v. -Collection and shipment of centrifuge to chamber separation of paper and thin. -System by air extraction separation of papers. -Collection and shipment to cyclone for Big-Bag filling.

Type: APE 250. Band saw blade pneumatic strip shears. Strip width up to: 250 [mm]. For straight rectangular and burr-free cutting off the bandsaw blades. Pneumatically operated for double cutting (two shear knives). Year of manufacture: 2016. On stock more Ideal BAS flash butt welding machines and automatic punching presses Bruderer, Mabu, Schaal, Bihler and more.

General: Power 1.5 kW 16 A Other equipment and accessories included: Coolant device 2 saw blades

Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is approx. Available at the beginning of October (probably earlier) and would then have to be picked up on a fixed date. Disassembly and collection by buyers The machine is in top condition, ready for  ...

: 6,0 mm ST 40 : 3,0 mm VA : 30 - 140 Grad blade length: 200 x 200 mm table:: 900 x 990 mm work height max.: 940 mm Punching capacity: 35,0 in 6,0 mm engine output: 4,0 weight: 1020 kg range L-W-H: 900 x 990 x 1200 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - hydraulic Notching machine with adjustable angle & punching station - 1 set of cutting knives - Round punch with die 12 mm - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad was created with ModulMWS - the software ...

: 6,5 mm ST 40 : 3,5 mm VA : 90° Grad blade length: 250 x 250 mm table:: 810 x 750 mm work height max.: 950 mm engine output: 4,0 weight: 630 kg range L-W-H: 810 x 750 x 1150 mm Characteristics : - Notching with a burr-free cut, without deformation of the cut edges - Blades made of surface-hardened tool steel - Operation by means of a foot pedal, so both hands are free for the workpiece - Large dimensioned work table with built-in scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting blade for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglas protective cover - Foot pedal with emergency stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

T60C sliding table saw in CE equipment • Control 3.5" in control panel at eye level included • Handwheel for adjusting the parallel stop from operating position, digital display included • Cutting width 1,350 mm included Trimming table length 3.3 m Cutting width 1,350 mm "2-axis scoring unit, electric Scratch position left/right and scratch height can be positioned via control while the scoring saw is running, electronic display of the adjustment paths; automatic adjustment of the scoring system to each main saw blade; Blade change with ProLock; pneumatically liftable / lowered, separately from the main saw blade can be switched on / off; 0. ...

Vibrator Reinbold Type: AZR 600 Year of construction: 04/2020 as good as new - only 454 operating hours Hydraulic moving floor Feed opening 800 x 600 mm with top-mounted hopper 1200 x 1000 mm Filling height 1610 mm Hopper capacity approx. 0.6 m³ Working width of the rotor 570 mm Diameter of the rotor 254 mm Power main motor 18.5 kW Rotor speed 93 rpm. Suction nozzle diameter 160 mm 30 Circular Knives The circular blades can be rotated 8 times Screwed knife carrier 2 counter knives – clearing knife V 8 Screen perforation 20 mm, replaceable Particularly insensitive to nails in e.g. pallets Suitable for hardwood in all sizes, wet wood, plastic, paper and cardboard etc. Throughput capacity of material and screen hole dependent Dimensions 2000 mm x 1400 mm x H 1600 mm Weight 1300 kg

planing width: 520 mm; planing shaft type: tersa; number of blades: 4; sourface table length: 3000 mm; table adjustment: electrically; read out table height: digital; sourface fence adjustable: yes; motor power: 7 kW; suction connection: 120 mm; machine length: 3005 mm; machine width: 1460 mm; weight: 870 kg; - Dressing tables made of gray cast iron - The dressing table adjustment takes place via a precise parallelogram system, so that the distance between the table tips and - - the knife shaft remains the same in every adjustment position - Large precision aluminium dressing fence, slightly tiltable 90 - 45 ° - The inclination of the stop is easily readable from the operator side - As standard with auxiliary stop for safe planing of even narrow workpieces - Large four-knife shaft, precision-mounted - Quiet running with precision aggregate and heavy cast iron execution -  ...

Working width: 520 mm; Planing shaft: Tersa; Number of knives: 4; Dressing table length: 2300 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: pneumatic; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness display: digital; Feed speed: 5/8/12/18 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure beams: articulated; Table rollers: no; Engine power: 7 kW; Engine braking: yes, automatic; Suction connection: 160mm; Machine length: 2300 mm; Machine width: 1100 mm; Weight: 980; Stable steel-gray cast iron construction Size, ribbed dressing tables made of gray cast iron Smooth running due to high dead weight Four feed speeds Motorized thickness table stroke with two speeds and digital display Articulated pressure beam in infeed 4 knife shaft, pre ...

Without battery and charger, Makita DJR183 cordless reciprocating saw (body) with 2 saw blades

Inv. Num. : 4024 Type: M 4040-CNC Producer: LACH-DIAMANT Produced: 1998 Parameters: Travel X-axis: 210 mm Travel Y-axis: 240 mm Travel Z-axis: 400 mm Tool diameter: 400 mm Tool holder: ISO 50/SK 50 Machine weight: 1750 kg It is used for sharpening diamond tools (PCD) for the furniture industry. Accessories: Saw blades up to average 600 mm Shaft heads

plate thickness: 6,0 mm ST plate thickness: 4,0 mm VA table-size: 1200 x 900 mm blade length: 250 x 250 mm strokes per minute: 45 min adjustable: Winkel 30°-135° mm work height max.: 1050 mm engine output: 4,0 kW weight of the machine ca.: 1.300 kg range L-W-H: 1200 x 1350 x 1600 mm Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - 2x speeds - Inching mode for adjusting the shear blades - 2x adjustable stop rulers - Machined work table, with T-slots - free-moving footswitch - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

SLICING-CUTTING AND DICING MACHINE, URSCHEL, TIPO RA-A Technical description: It works with meat and vegetables. Serial number: 1027 Material: Stainless steel Power supply: 380/440V - 50/60Hz Dimensions: 1000 x 930 x 1590 mm Includes spare parts kit Slice thickness: 1/16 a 3/8 inch. (1,6 a 9,5 mm) Circular blade cuts: 1/8 a 1 inch. (3,2 a 25,4 mm) Cross cut blades: 0,05 a 3 pulg (1,3 a 76,2 mm) The RA-A model produces a wide range of diced and shredded cuts of a variety of products, such as fruits, vegetables, seasonings, nuts, and processed meats. Maximum product inlet size is 3-1 / 2 in. (88.9 mm) in any dimension. The RA-A offers continuous operation for uninterrupted production and a simplified design for easy cleaning and maintenance.

Inlet: approx. 500 x 490 mm Rotor width: approx. 500 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor blades: 3

Without battery and charger, Makita DJR183 cordless reciprocating saw (body) with 2 saw blades

Membrane deskinning machine; 3-phase 380-415V; power 0.75 kW; equipped with spare blades and drive belts; suitable for meat, but also for fish by means of water connection; Refurbished machine

3-phase 380-415V; 5A (Nominal 3.1A); equipped with spare blades and drive belts; suitable for meat, but also for fish by means of water connection; Refurbished machine

Inlet opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor blades: 4 x 2 Propulsion: 30 kW We have identical machines available. Feed opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor knives: 4 x 2 Drive: 30 kW We have identical machines in stock.

Inlet: approx. 500 x 490 mm Rotor width: approx. 500 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor blades: 3

Milling block; milling block; milling heads; milling machine; external size 125 mm; height 180 mm; shaft hole 40 mm; v.v. interchangeable blades

with additional saw blades

Inlet opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor blades: 4 x 2 Propulsion: 30 kW We have identical machines available. Feed opening: approx. 300 x 600 mm Rotor width: approx. 600 mm Rotor diameter: approx. 300 mm Stator knives: 2 Rotor knives: 4 x 2 Drive: 30 kW We have identical machines in stock.

For sheets, plates, etc. With horizontal feeder Working width 1050 mm, max. inlet height 50 mm Open rotor 600 mm diameter with 4 blades 2 stator knives Main engine 75 kW

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW

Equipped with HBM 300 Profi mobile moth extraction with hose. Assembled wooden work table conversion Diamond saw scoring device, various loose saw blades, both new and used.

Max. workpiece thickness: 20mm, including one unused and originally packed set of blades.

Inlet opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor blades: 5 Propulsion: 45 kW Feed opening: approx. 600 x 580 mm Rotor width: approx. 580 mm Rotor diameter: approx. 450 mm Stator knives: 3 Rotor knives: 5 Drive: 45 kW

Inlet opening: approx. 1000 x 1700 mm Rotor width: approx. 700 mm Rotor diameter: approx. 1000 mm Stator knives: 2 Rotor blades: 10 Propulsion: 110 kW

Including blades, without documentation.