used Bending Presses for sale

pressure: 300 tchamfer lenght: 3050 mmquantity of oil: 400 ldimensions: 4550x3000x3700 mmweight: 19000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 tchamfer lenght: - mmdistance between columns: - mmcontrol: Siemens Sinamics G110 total power requirement: kWweight of the machine ca.: 5500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secreturn speed: 165 mm/secwork speed: 10 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90,0 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7,5 kWback stop - adjustable: 0 - 500 mmWeight: 4.320 kgrange L-W-H: 2.250x1.960x2.750 mm--------------------------Press brake with optional equipment installation height / Cylinderas well as increased bending beam velocities--------------------------Facilities:- DELEM - CNC ER 70 graphics controller- Motion control: Y1 - Y2 - X - R axes- Back gauge with X-axis 800 mm, R = 250 mm with 2 gauge fingers, ball screws- Quick change punch holder AMADA Promecam- Rehfuss-top tool, ground version- Universal die block 60x60 mm with 4V in the die shoe- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- V ...

pressure: 40 tchamfer lenght: 1270 mmweight of the machine ca.: 3250 kgdimensions of the machine ca.: 2150x1650x2300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secreturn speed: 190 mm/secwork speed: 12,0 mm/minwork stroke: 375 mmdayligth: 650 mmoil volume: 300 ltr.table height: 900 mmvoltage: 400 VoltThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Total strokes (13-03-2024): 61.872 See PDF for more technical information List of tools supplied with the machine: Tool length >,4000 mm Dies: 3209 ,  ,V12 3215 ,  ,V24 3234 ,  ,V50 3223 ,  ,V100 3040 ,  ,V12 ,  ,26 gr. ,  ,  ,R3 Hemming die BMR 55.16.30 ,  ,  ,  ,  ,  , V16 30 gr. Top tool: 1310 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 85 gr. ,  ,  ,R0.8 H115 1030 ,  ,  ,  ,  ,  ,  ,  ,  ,  , 88 gr. ,  ,  ,R0.8 H145 TOP.175.26. ,  ,  ,  , 26 gr. ,  ,  ,R0.8 H145 Note! Loading costs are calculated for the complete machine loaded on a flatbed trailer. If the machine has to be dismantled, adition costs will be chargedserial number: 00025469-ERH, throat: 510 mm, Read of ...

Description: Upright width 850 mm Installation height 470 mm Y-travel 196 mm Y-axis speed 200 mm/sec. Description: Demonstration machine Standard accessories: CNC control Panasonic Toughbook incl. USB and WIFI connection Direct drive via servo motor and ball screw Safety device inc. Dual laser Monobloc machine frame made of Meehanite (700N/mm² tensile strength) Back gauge with 2 axes CNC controlled Ergonomic design Device for internal transport with forklift Upper tool clamping system Amada / Promecam Bottom tool clamping system Amada / Promecam Special accessories: Back gauge 4-axis CNC controlled X / R / Z1 / Z2 Laser Safe Iris Rapid Bend Hydraulic upper tool clamping system Wila 13mm Hydraulic lower tool clamping system Wila 13mm Notes: Ergonomic press brake made from a sturdy monoblock frame (Meehanite cast iron 700N/mm²) The machine has a direct drive via servo motor and ball s ...

pressure: 135 tchamfer lenght: 3060 mmweight: 8800 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 tchamfer lenght: 3000 mmdistance between columns: mmthroat: mmdistance between table / ram: mmstroke: mmfeed down: mm/secfeed bending: mm/secfeed up: mm/secengine output: kWweight of the machine ca.: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 220 tchamfer lenght: 3150 mmdistance between columns: 2600 mmControl: CYBELEC VisiTouch 19 2D dayligth: 525 mmstroke: 275 mmfeed down: 150 mm/secfeed bending: 0-10 mm/secfeed up: 120 mm/sectotal power requirement: 18,5 kWweight of the machine ca.: 15.600 kgdimensions of the machine ca.: 4250x2000x3150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Bending length: 4050 mm Pressing force: 45 tweight approx.: 8,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 1,600 x 2,000 mm

Description: Force: 30 tonnes Maximum working length: 2050 mmweight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,200 x 2,100 mm

pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• manual back stop• upper and lower tools• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 135 t: 3100 mm: 2600 mm: 400 mm: 200 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of axes 5 Pressing force kN 1000 Working length mm 2600 stroke mm 200 Operation mm/s 10 Delivery speed mm/s 200 Return speed mm/s 200 Main engine power kW 11.4 Control BC 55 Graphics Safety Fiessler Light Barriers Accessories Various press brake tools Operational documentation

pressure: 3 tchamfer lenght: 3600 mmdistance between columns: 3100 mmControl: CNC type: M9101 Controllertotal power requirement: kWweight of the machine ca.: 13 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 150 t: 3100 mm: 2600 mm: 400 mm: 270 mm: 800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 135 tchamfer lenght: 3050 mmdistance between columns: 2550 mmstroke of upper beam: 130 mmthroat: 200 mmdayligth: 310 mmworking feed: 7,0 mm/secreturn speed: 50,0 mm/secControl: konv. work height max.: 905 mmtable width: 180 mmoil volume: 250 Litertotal power requirement: 7,5 kWweight: 7800 kgrange L-W-H: 3500 x 1700 x 2280 mmFurnishing:- simple / conventional electro-hydraulic press brake- swiveling operation, front left- electric, stepless depth adjustment (Y1+Y2 axis) including analogue depth display- manual backgauge, with analogue position display adjustable from the front on ball screws 2x manually adjustable stop fingers- Manual (jog mode) and automatic cycle selectable- split deer foot upper tool (segmented)- 2x reversible MULTI V die blocks- 1x freely movable foot control Machine link:https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machinen o=1008-9308351The da ...

Specifications: Machine stands over the hallway, does not go into the floor - Printing capacity 400 t - Working width 3100 mm - Passage between stands 2600 mm - Table width 300 mm - Projection 400 mm - Installation height 500 mm - Ram stroke 550 mm - Table height 1000 mm - Drive 400 V / 50 kW - Space requirement approx. W 4100 x H 3800 x D 2200 mm - Weight machine approx. 24800 kg - Weight accessories approx. 1000 kg -with: - Swivel arm – control panel for press depth - Control ATS 460 renewed in 2007 - two-hand control panel, foot switch, - Sharpening tool 2500 mm - V – die 2700 mm - various short press brake tools

pressure: 135 tchamfer lenght: 4100 mmdistance between columns: 3600 mmstroke: 130 mmdayligth: 325 mmthroat: 250 mmworking feed: 10,0 mm/secreturn speed: 100 mm/sectable width: 180 mmwork height max.: 865 mmControl: M 9101 oil volume: 225 Literengine output: 11,0 kWweight: 11.500 kgDimensions (LxWxH): 4270 x 1500 x 2530 mmFurnishing:- HACO / Robosoft NC control, model M 9101 controller- with external display / screen- pivoting control, front left- electric back gauge (X axis)- with 2x stop fingers, manually adjustable manual windage (Z axis) manual height adjustment (R axis)- hydraulic upper tool clamping- manual table crowning, adjustment with hand crank- segmented upper and lower tools- free-moving 2-hand control- free-moving footswitch- rear protective device (self-made)- User manual in German Machinevideo :https://www.youtube.com/watch?v=TXQTytSd_6Y&feature=youtu.beThe data for this  ...

pressure: 400 tchamfer lenght: 4000 mmdistance between columns: 3500 mmControl: CNC type: BC 25 Graphicthroat: 400 mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between stands 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg -with: - Two-hand control panel with foot switch

pressure: 260 tchamfer lenght: 3000 mmdistance between columns: mmupper beam stroke: 250 mmtotal power requirement: kWweight of the machine ca.: 17 tdimensions of the machine ca.: 3,40 x 1,90 x 3,45 m• Controlled axes: Y, X• Control: Haco type PB 2350• Pivoting control panel, left front• Free-moving dual footswitch• Tool package:Stamp straight, H 175mm, approx. R 1.54 V block die V 15.22, 35, 50 mmDie V 100, length = 4 x 835 mmDie V 80, length = 4 x 835 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 180 tdistance between columns: 380 mm: cylinder: überholt working width: 3100 mmweight of the machine ca.: 11,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2600 mmstroke of upper beam: 120 mmthroat: 250 mmdayligth: 325 mmworking feed: 7.0 mm/secreturn speed: 60.0 mm/sec: 300 barControl: ATL 550 work height max.: 915 mmtable width: 180 mmtotal power requirement: 7.5 kWweight: 8250 kgrange L-W-H: 3500 x 1700 x 2380 mmFurnishing:- simple NC controlled hydraulic press brake, including torsion shaft- including ATLANTIC NC control ATL 550 Positioning of the back gauge (X) Positioning of the depth adjustment (Y1+Y2) Possibility of programming various programs Storage capacity max. 200 programs - max. 400 sets Swivel control panel, front left- electro-motorized, stepless depth adjustment (Y1+Y2 axis)- electro-motorized back gauge (X axis) 2x manually adjustable stop fingers- manual table crowning, including analogue value display- 1x split upper tool set - HACO holder- 1x rotating MULT ...

To force 80 Bending length 2100 mm with 3-point bending system . Installation height 782 mm Working stroke 265 mm . Rapid traverse 150 mm Step 10 mm Power 13 kW To machine weight 7,8 . with -3-point bending system -hydraulic tool clamping -sliding conditions -SICK photoelectric -6-axes stop system -many tools . . Control repair needed! Details on sale!

sheet width: . mmplate thickness: . mmdistance between columns: . mmpressure: tchamfer lenght: mmtotal power requirement: kWweight of the machine ca.: 10 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2050 mmcontrol: CYBELEC DNC 880S weight: 8000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 tchamfer lenght: 4100 mmdistance between columns: 3550 mmMachine No.: 5083 weight of the machine ca.: 24.000 kgNew controller: DNC 884sPSDomestic equipments:- CNC controlled X & R axis- CNC controlled crowning- hydraulic stamp clamping- Fiessler safety light barrierThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: working length: 2500 mm max. pressing force: 80 t manually adjusts the limiter possibility of adjusting the left and right sides by height no documentation  , please also have a look at the video of this machine Max. pressing force: 80 to, bending length: 2,500 mm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,600 x 1,650 mm

pressure: 200 tchamfer lenght: 3550 mmdistance between columns: 3050 mmcolumn arm: 200 mmajustment speed: 100 mm/secworking feed: 8,0 mm/secreturn speed: 120 mm/secstroke: 190 mmtable height: 900 mmdayligth: 350 mmengine output: 15,0 kWoil volume: 150 ltr.Control: ELGO weight of the machine ca.: 13500 kg.range L-W-H: 4800 x 1750 x 2800 mmFurnishing:- simple / electro-hydraulic NC press brake- with digital ELGO display digital position display for backgauge (X axis) digital position display for depth adjustment (Y1+Y2 axis)- swiveling operation, front left- electro-motorized back gauge - X axis- electro-motorized adjustment of the immersion depth - Y axes Machine with torsion shaft- front support arms- continuous adjustment of the pressure force (upper beam)- 1x universal matrix block, reversible- 1x set of split deer foot upper tool- 1x freely movable 2 hand/foot control Machine link:htt ...

Key data: 30 t, 1250 mm, 1010 mm

SPECIAL MODEL: The butt flap is equipped with 2 additional stop fingers as standard / • Stress-relieved welded steel construction •Upper beam with torsion shaft •NC control with touchscreen HMI • Back gauge with X and R axes •European Style Upper Tool

pressure: 185 tchamfer lenght: 3100 mmdistance between columns: 2600 mmthroat: 500 mm: 300 mmdayligth: 500 mmwork height max.: 950 mmworking feed: 0-10 mm/secreturn speed: 140 mm/secengine output: 18,5 kWcontrol: DELEM DA-66T weight of the machine ca.: 15000 kgdimensions of the machine ca.: 4000x2600x3400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - working length 3500 mm - Stand passage 3050 mm - max pressing force 2000 kN - Distance table / ram max. 480 mm - Stand projection 260 mm - Ram stroke approx. 300 mm - Lifting speeds - Downspeed idle max. 100 mm/sec - Boost speed 80 mm/sec - Downward pressing speed max. 10 mm/sec - Total drive power 25 kW - Space requirement approx. W 4500 x H 3150 x D 2100 mm - Weight approx. 16000 kg -with: - CNC control CYBELEC renewed in 2008 - controlled crowning device - controlled backgauge with height adjustment 5 - 1000 mm - hydr. Tool clamping - Upper tool + universal die tool - Material requirements - Two-hand control panel

throat: 200 mm, Max. pressing force: 70 to, bending length: 3,000 mm, stroke: 120 mm, rare limit stop: 500 mm, weight approx.: 4,000 kg, Approx. Onsite Dimension. (l x w x h): 3,300 x 1,100 x 2,300 mm

Description: SPECIFICATIONS Character: LVD Type: PP70/30-40 Hydraulic: Yes Capacity: 70 T Bending length: 4,000 mm Flat on the ground: Yes Multi V + J blade: Yes Manual back gauge: Yes Top drive: Yes Includes 1 set of tools: Yes Machine dimensions: 4,050 x 1,060 x 2,420 mmweight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 4,050 x 1,060 x 2,420 mm

pressure: 135 tchamfer lenght: 4050 mmdistance between columns: 3150 mmthroat: 200 mmdayligth: 310 mmpiston stroke: 130 mmajustment speed: 100 mm/secworking feed: 8.0 mm/secreturn speed: 65.0 mm/sectable width: 180 mmtable height: 900 mmControl: ELGO P8822 pressure: 220 bartotal power requirement: 8.5 kWweight: 8700 kgrange L-W-H: 4500 x 1700 x 2640 mm from a maintenance workshop maintained condition ()Furnishing:- simple NC electro-hydraulic press brake- with ELGO digital control unit - model P8822 Positioning of the back gauge (X axis) Positioning of the depth adjustment (Y1+Y2 axis) Swivel control panel, front right- electro-motorized back gauge (X axis) with digital ELGO position display 2x manually adjustable stop fingers (R+Z axis)- WILA manual table cambering, with analogue actual value display- split deer foot upper tool: https://www.ukb-gmbh.de/de/16520.html- 1x rotating univers ...

pressure: 320 tchamfer lenght: 4000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mBrand: LVDType: PPEB 320/40CNC brand: MorrisCNC model: Solutions ESA 630Year of make: 1990HydraulicCapacity: 320 TBend length: 4.000 mmMulti V + J-kniveSteered backstop X+RIncl. 1 Set of toolsMachine weight: 25.000 kgMachine is flat on the groundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: clamping top/bottom tools: manualthroat: 300 mm, Max. pressing force: 50 to, Tool clamping type : manueel, bending length: 2,000 mm, control: Mazak Pal B-1, rare limit stop: 1,000 mm, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,350 x 2,650 mm

Hydraulic press brake Manufacturer: MENGELE Type: A 100-2 Pressing pressure: 100t Stroke: 160mm electr. Connection: 400V 3Ph Year of construction: 1964 Condition: used and functional

Press brake edge machine edge bench press used Manufacturer: Mengele Type: C320-4B Built: 1966 last revision and repair: 2000 Location D-01587 Riesa Dimensions WxH: 6,250 x 3,650 mm Edge knife width: 6,150 mm sheet thickness at 6,000 mm bending length: approx. 7.5 mm. The machines are designed for very deep shaft bends, therefore very deep cheek recesses. Original 300 t pressing force - In 1989 the pressing force was increased to 350 t. The press is in very good condition despite its age. The machine is disassembled and ready for loading. documentation for the machine is available. Weight: about 45 t

pressure: 50 tchamfer lenght: 3075 mmdistance between columns: 2600 mmControl: Sintesi throat: 250 mmupper clamping stroke: 140 mmdayligth: 295 mmpre-running speed: 90 mm/secpress speed: 1-7 mm/secreturn speed: 62 mm/sectotal power requirement: 4 kWweight of the machine ca.: 4,4 tdimensions of the machine ca.: 3,7 x 2,2 x 2,2 mCondition: ready for operation: Video(s) available on our website.: CE signed: Electric 380 Volt: Foot switch: 2-hand-control panel: Upper tool divided: 3000 mmUpper tool: spitz/gekröpft Matrize: 1 V / geteilt, 3000 mmMatrize 4 V: 3000 mmProtective railing behind, right + left side: Mot. back gauge: 600 mmcrowning system: Hydraulic press brake with Sintesi microprocessor control for the axes Y1 + Y2 immersion depth and x back gauge. The control calculates and controls the immersion depth by specifying the bending angle and the position of the back gauge. T ...

pressure: 6,2 tchamfer lenght: 285 mm mmdistance between columns: 230 mmdayligth: 215 mmthroat: 70 mmstroke: 100 mmworking feed: 9,8 mm/secreturn speed: 50 mm/secquantity of oil: 10 lControl: DELEM DA 41T total power requirement: 0,7 kWweight of the machine ca.: 250 kgdimensions: 900 x 1300 x 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 210 tchamfer lenght: 3100 mmdistance between columns: 2600 mmdayligth: 490 mmthroat: 350 mmstroke: 215 mmworking feed: 9,8 mm/secreturn speed: 80 mm/secajustment speed: 130 mm/secwork height max.: 845 mmControl: DELEM DA 69 total power requirement: 15 kWweight of the machine ca.: 15 kgdimensions of the machine ca.: 3880 x 1675 x 3880 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 60 tchamfer lenght: 2050 mmdistance between columns: 1550 mmdayligth: 475 mmthroat: 255 mmstroke: 165 mmworking feed: 9,8 mm/secreturn speed: 117 mm/secajustment speed: 150 mm/secControl: DELEM DA 65 total power requirement: 5,5 kWweight of the machine ca.: 5000 kgdimensions of the machine ca.: 2300 x 1550 x 2470 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 tchamfer lenght: 2550 mmdistance between columns: 2050 mmControl: Delem DA-66T throat: 255 mmram stroke: 215 mmdayligth: 530 mmrapid traverse - down: 150 mm/secpress speed: 1 - 9,8 mm/secreturn speed: 80 mm/secpower capacity: 7,5 kWtank contens: 228 lsound - pressure - turn off level ca. max.: >70 dBconnected load: 12 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 2,9 x 1,6 x 2,8 mCE signed: Electric 400 Volt: Foot switch: Light barrier in front: Matrize: Upper tool: crowning system: Mot. back gauge: 580 mmHydraulic press brake with updated CNC control Delem DA-66T,controlled backgauge in the axes X and R as well as Z manually with 4 stop fingers, hydr. Modufix tool clamping, Lasersafe, Wila crowning, cranked upper tool and matrix single V.X-axis back gauge 580 mm, max. 300 mm/sec, accuracy +/-0.05 mm.R-axis stop vertical 200 mm, 150 mm/sec, accuracy  ...

Key data: 50 t, 2000 mm

Machine Type: Press Brake Manufacturer: Promecam Type: 50x2 Condition: used / functional Offer will only be sent if a complete imprint is provided! Price 5.650 Euro incl. 19% VAT ex stock Warstein Location Warstein , Germany Reference M-PRO-0923 DESCRIPTION We offer you a used press brake from the manufacturer Promecam. Specifications Bending force 50t Bending length 2m Weight approx. 3.2t No tools required Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!

Key data: 50 t, 2550 mm, 2050 mm

- Pressure: 50 t - Working length: 2550 mm - Stand width: 2050 mm - Bending capacity: at 1 m - up to 10 mm - Space requirements (W x D x H): 2.9 x 1.6 x 2.3 m - Machine weight: 4200 kg - Total power: 4.5 kW - Condition: very good Details little run, very good condition, cylinders all tight, press control type PSSAS Accessories Miscellaneous bending tools, documentation, stands for tools