137,863 used machines on RESALE, but how to find them? Machine Search
: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 € : 269.18 € : 76 mm : 370 mm : 680 mm : 910 mm : 193 kg : 15 cm³ : 76 x 3 mm : 2 x 5,4 mm : 76 x 3 mm : 70 x 4 mm : 76 x 1,6 mm : 76 x 4 mm : 76 x 6 mm : 76 x 6 mm : 76,3 x 3,25 mm : 50 x 4 mm : 45 mm : 75 x 15 stehend, 75 x 30 mm : 380 mm : 10 mm : 10 mm : 1/2 U/min : 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 2000 mm, 8 mm, 6 mm
PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centr ...
4-roll 2000x6 mm plate bending machine Davi model MAX2017 year 2004 used plate roll in working condition, Planetary dual pre-pinch Performance Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling diameter ID 350 mm rollers length 2050 mm Upper roll 165 mm Pinch roll 155 mm Side rolls 120 mm Power electric motor 3 kw on hydraulic unit Vac 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic commands via leverage distributors Infinitely variable speed control Digital position readout --- Hydraulic driven motorized the central rolls Pre-pinch pressure adjustable for pre-bend Drop-end front open to unload closed shells Re-rolling system for calibration of welded shell Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg
consisting of three rollers Working length: approx. 1500 mm Reference: STS - Lot 6 Auction-ID: A7-49882-247
Machine number: 4444 incl. foot switch Reference: Steinbach & Holler - Lot 54 Auction-ID: A7-49882-134
Highly automated CNC tube bending cell Rosenberger RB20 Typical application The RB20 series is designed for cold bending of one or more bends on pipes It is used in industries such as the automotive industry, furniture manufacturing or plant engineering, where precise series bending is required. Technical features and function Type: ROSENBERGER RB20 (built in 2003) Performance & geometry: Servo-electric precision drive with a cold bending capacity of max. Ø 20 x 1.5 mm in steel. High flexibility due to freely selectable bending planes within the 78 mm tool height as well as generous 3-axis travel paths (X/Y/Z: 260 × 146 × 1,170 mm) Control technology: The logical processing is carried out via a robust Siemens Simatic S7-300 PLC, paired with an industrial control panel from B&R Robot automation: Fully automatic handling (loading/unloading) by means of an integrate ...
Pipe bender - Power 3/8\" to 2\" pipe - Tools for 3/8\" - Incl. base frame see pictures Auction-ID: A7-50084-3
Sheet metal bending machine with special dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swing-out upper roller - Brake motor - Safety device emergency exit line - Documentation in English - 400V Sheet width 1000 mm Sheet thickness 3.0 mm Stand width 1050 mm Upper roller diameter 90 mm Total power requirement 1.1 KW Machine weight approx. 0.47 t Dimensions approx. 1.7 x 0.8 x 1.35 mm Auction-ID: A7-50084-40
Sheet metal bending machine with: – Electrically adjustable rear roller – Digital display for the movement of the rear roller – Hardened rollers – Conical rolling – Swivelling upper roller – Brake motor – Emergency stop – Documentation – Connection voltage 400V Sheet width 1070 mm Sheet thickness 4 mm Stand width 1100 mm Upper roller diameter 110 mm Total power requirement 5.0 KW Machine weight approx. 1.2 t Space requirement approx. 2.0 x 0.9 x 1.1 mm Auction-ID: A7-50084-137
Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Flat steel 50 x 10 mm Angle steel mm Axle diameter 30 mm Working speed 6.0 rpm Roller diameter - tools 132 mm Total power requirement 0.75 kW Machine weight approx. 0.25 kg Dimensions approx. 0.6 x 0.8 x 1.3 m Auction-ID: A7-50084-106
Sheet metal roller Working width max. 610 mm. Sheet thickness max. 1 mm. Diameter of the rollers 38 mm. Packaging dimensions 95 x 27 x 36 cm. Weight 40 kg. Condition: never used / new (5) Auction-ID: A7-50084-46
Used, untested. Including additional tools. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-3
Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A7-50084-161
Electric profile roller with - 5 set of rolls 2x for round material 20mm and 30mm, 1x for flat material 1x for square material - Foot switch with emergency stop Round material 30 x 1 mm Square material 30 x 30 x 1 mm Round material solid 16 mm Square material solid 30 x 10 mm Speeds: 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Dimensions approx. 0.82 x 0.60 x 1.26 m Condition: never used / new (5) Auction-ID: A7-50084-61
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Digital display - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Angle steel 20 x 20 x 4 mm Flat steel 25 x 6 mm Axle diameter 20 mm Working speed 11 rpm Total power requirement 0.2 kW Machine weight approx. 80 kg Space requirements approx. 0.6 x 0.6 x 1.5 m Auction-ID: A7-50084-77
Sheet metal bending machine 3 rollers - 2 driven rollers - Footswitch - Emergency stop facility Sheet width 2100 mm Sheet thickness 2.0 mm Stand width 2150 mm Roller diameter 90 mm Total power requirement 1.5 KW Machine weight approx. 0.7 t Space requirement approx. 2.5 x 0.7 x 1.3 mm Auction-ID: A7-50084-84
Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-50084-203
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Hardened special steel shafts - 1 set of standard rollers - 2 rollers are driven Round material solid 35 mm Square material solid 35 mm Gross diameter max. 70 x 2 mm Rectangle 60 x 60 x 3 mm Flat steel 60 x 10 mm Axle diameter 50 mm Working speed 4.3 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Dimensions approx. 0.9 x 0.95 x 1.4 m Condition: never used / new (5) Auction-ID: A7-50084-133
Sheet metal roller for the vice. Maximum working width 300 mm. Maximum rolling capacity 2.5 mm. Diameter of the rollers 32 mm. Condition: never used / new (5) Auction-ID: A7-50084-206
Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0.025 t Condition: never used / new (5) Auction-ID: A7-50084-191
Electric profile roller - Choice of horizontal or vertical work - 1 set of hardened standard rollers - lower 2 rollers are driven - 1 set of plastic rollers for diameter 33.7mm/1\" - Instruction manual - Footswitch left/right and EMERGENCY STOP Round material solid 30 / 900 mm Square material solid 30 / 900 mm Angle steel 35X35X5 / 600 mm T - Steel - Bridge to the outside 50x6 / 600 mm Axle diameter 40 mm Working speed 4.5 m/min Roll diameter 148 mm Total power requirement 1.1 kW Machine weight approx. 0.3 t Space requirement approx. 0.75 x 0.6 x 1.4 m Condition: never used / new (5) Auction-ID: A7-50084-50
Mobile base, External control panel, Control panel Auction-ID: A1-50085-6
Flat steel bending machine The following bending tools are included: 1\" - 1 1/4\" - 1 1/2\" - 2\", - 2 1/2\", - 3\" Bending tools diameter 1\" to 3\" mm Wall thickness max. 16 mm Machine weight approx. 26 kg Package size max. 0.6 x 0.3 x 0.3 m Condition: never used / new (5) Auction-ID: A7-50084-171
Used, untested. Documentation and instruction manual available. Equipped with automatic stop. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-12
Sheet metal bending machine with special dimensions: - Capacity 700 x 4 mm - Conical bending - Swing-out upper roller - Safety device emergency exit line - Documentation - 400V Sheet width 700 mm Sheet thickness 4.0 mm Stand width 720 mm Top roller diameter 95 mm Total power requirement 1.1 KW Machine weight approx. 0.37 t Dimensions approx. 0.95 x 0.76 x 1.25 mm Auction-ID: A7-50084-68
Profile bending machine with: - Foot pedal right/counterclockwise rotation - Mount: Shaft 50mm - With digital display - Hardened special steel shafts - 1 set of standard rollers - 2 driven rollers - Top roller can be hydraulically fed up and down - Horizontal and vertical operation - Motor with brake device Round material solid 35 (600) mm Square material solid 35 (900) mm Angle steel 50 x 50 x 5 (800) mm T - Steel - Bridge Outside 60 x 7 (600) mm Axle diameter 50 mm Working speed 4.5 m/min Total power requirement 1.5 kW Machine weight approx. 0.4 t Space requirement approx. 1.1 x 0.8 x 1.5 m Condition: never used / new (5) Auction-ID: A7-50084-29
Pressure 20 t Stroke 200 mm Table size 550 x 550 mm Working speed: 10 mm/sec. Working height 940 mm Tool height max. 200 mm Total power requirement 2.2 kW Bending capacity 200 x 10 mm Weight 650 kg Dimensions 1.1 x 0.6 x 1.22 m Condition: never used / new (5) Auction-ID: A7-50084-16
Sheet metal bending machine with special dimensions: - Capacity 1050 x 1.5 mm - Roller diameter 55mm - Swing-out upper roller - Machine weight 180 kg Dimensions approx. 1.4 x 0.8 x 1.2 mm Auction-ID: A7-50084-41
Press brake, bending machine, swing bending machine, die bending machine -Swivel bending machine: with opening upper jaw for completely closed bent sheet metal profiles -Manufacturer: LOTZE Type HZ 2500/3 -Drive: mechanical, cam control semi-automatic / bending angle preselection -Max. working width: 2500 mm -Max. sheet thickness: 3 mm -Max. intermediate dimension: 470 mm -Connected load: 6 kW Accessories: incl. bending tools/stops, see photos -Dimensions: 4150/1110/H1970 mm -Weight: 5040 kg
Additional technical specifications: • Bending capacity: 20 - 60 mm
The tube processing machine is mounted on a mobile base frame.
Additional technical specifications: • Walzendurchmesser jeweils: 100 mm
Three-roll bending machine, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll bending machine, profile bending machine, three-roll sheet metal rolling machine, manual bending machine -Manufacturer: Carl Kneusel, 3-roll bending machine, hand-operated -Max. sheet width: 1020 mm -Max. sheet thickness: mm -Roller diameter: 55 mm -Dimensions: 1670/580/H1150 mm -Weight: 156 kg
Sheet metal bending machine 3 rollers - 2 driven rollers - Emergency stop facility Sheet width 2040 mm Sheet thickness 6.0 mm Stand width 2100 mm Roller diameter - top 180 mm Roller diameter - bottom 160 mm Total power requirement KW Machine weight approx. 2.4 t Dimensions approx. 3.5 x 0.85 x 1.75 mm Auction-ID: A7-50084-92
Electro-hydraulic mandrel tube bending machine with - Four-fold bending angle preselection - Bending tools 48.3; 42,4; 33,7; 1/2\" - Mandrel length 4500mm Tube diameter 48 mm Bending radius max. 90° Total power requirement 1.5 kW Machine weight approx. 0.5 t Dimensions approx. 1.8 x 0.8 x 4.8 m Auction-ID: A7-50084-60
Folding machine - Manual back gauge max. 830mm - Bending angle preselection via limit switch Sheet width 2000 mm Sheet thickness 3.5 mm Stand width 2050 mm Opening width 355 mm Total power requirement kW Machine weight approx. 2.8 t Space requirement approx. 3.5 x 1.5 x 1.5 m Auction-ID: A7-50084-90
Pressure approx. 10 t Stroke 380 mm Table size 800 x 700 mm Total power requirement 4.0 kW Cylinder diameter 90 mm Weight 2.5 t Dimensions 2.2 x 1.4 x 1.6 mm Auction-ID: A7-50084-222
sheet width: 2050 mm plate thickness: 8.0 mm pre-bending capacity: 6.0 mm upper roll diameter: 190 mm lower roll diameter: 180 mm bending speed: 5.2 m/min work height max.: ca. 980 mm total power requirement: 5.5 kW weight of the machine ca.: 3500 kg. range L-W-H: 2900 x 1200 x 1280 mm Furnishing: - Robust electro-hydraulic 3-roller bending machine - planetary movement of the bending rollers with reduced center distance - Hydraulic motors combined with planetary gears for driving the 3 rollers - mobile operating unit, with connection cable + plug - extended roll ends for profile bending rolls - with conical bending device Inclination of the side rollers by handwheels Workpiece limitation for a cone with a 45° pitch: Working length max: 60% Bending capacity max: 50% - free-moving operation electric delivery rollers electric turning/rolling movement digital position display of the ...
tube diameter: 48 mm bending radius max.: 90 ° total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3, 42.4, 33.7, 1/2 - mandrel length: 4500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GASPARINI electronic folding machine mod. PSG-250/5000 FP FEATURES Axes: R – X – Y1 – Y2 , Z1 , Z2 Folding length: 5,100 mm Pitch between uprights: 4,555 mm Strength: 250 tons. Gooseneck: 465 mm Slide travel: 250 mm Distance between table-slide: 450 mm Control unit: delem Weight: 25,500 kg. Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year rebuilt: 2021 CE compliant. PROMECAN pneumatic tie-down. Self-centered lower table with pneumatic tie-down. 1,000 mm motorized backgauge ("X" axle) Height adjustment "R" axis 250 mm. CNC DELEM DA 66W. 4 adjustable motorized turrets Z1, Z2. Folded penetration (axis "Y1, Y2") Low voltage electric pedal operation. Emergency stoppages. Hydrodynamic anti-bending table by hydraulic pumping. Side protections. Level IV safety laser.
sheet width: 3100 mm plate thickness: 9 mm pre-bending: 6 mm diameter of upper rolls: 220 mm diameter of lower rolls: 200 mm side roll diameter: 170 mm min. dia.: 250 mm roll speed: 6 m/min total power requirement: 10,3 kW weight of the machine ca.: 4651 kg dimensions of the machine ca.: 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics ...
Control Conventional Drive Hydraulic Power [kW] 2.2 Max. sheet thickness [mm] 2 Max. working width [mm] 6020 Max. opening [mm] 150 Max. bending angle [°] 135 Options Long press brake Auction-ID: A1-40982-5
Control Conventional Drive Hydraulic Number of rolls [pcs.] 3 Number of driven rollers [pcs.] 3 Shaft diameter [mm] 75 Diameter upper roller [mm] 225 Capacity diameter round [mm] 60 Auction-ID: A1-40982-35
On metal column With round steel handle length approx. 147 cm Auction-ID: A1-50251-200
sheet width: 2040 mm plate thickness: 6,0 mm distance between columns: 2100 mm roll diam. toproll: 180 mm roll diam. bottom roll: 160 mm total power requirement: KW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Working length: 1270 mm Roller Ø: 120 mm Max. sheet thickness: 4.5 mm Sheet thickness at bending: 4 mm electr. Connection: 400 V, 2.2 kW Weight: 1250 kg Space requirement: 2300 x 800 x 1100 mm
maximum number of results exceeded
please refine your search
300 € 
