batch mixer used for sale

Stock # U2423-1 Used stainless steel conical nauta type powder mixer by Pharming type HV 1000 (CZ). Cone has diameter 1550 mm x height 2200 mm. Total volume of tank about 1700 l, working volume up to 1000 l. Total height 324 cm. Standard mixing screw is top driven by el. motor 3 kW, 970 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 330 cm x diameter 170 cm x weight approx 1000 kg. Machine had been working in food industry.

Stock# U2423-2 Used stainless steel conical nauta type powder mixer by Pharming type HV 600 (CZ). Cone has diameter 1440 mm x height 1855 mm. Total volume of tank about 1300 l, working volume up to 600 l. Total height 2770 mm. Standard mixing screw is top driven by el. motor 3 kW, 965 rpm, 230-400 V, 50 hz, and supported by bottom pintle bearing. Arm rotation - 2 rpm. Screw rotation - 60 rpm. Discharge via bottom rotary slide outlet valve, operated manually. Mixer is mounted on 3 lugs with carbon steel supports. Included technical documentation. Shipping dimensions: length 277 cm x diameter 180 cm x weight 600 kg. Machine had been working in food industry.

Lot 592 500L steam jacketed hemispherical scrape surface vessel, bottom central discharge, half moon lid, agitator (six sets of removable propellers along shaft)

3 liter laboratory mixer -Container V2A -Container to remove -Drive 1 motor frequency controlled

1 piece NAUTA mixer MBX 28-R -Volume ca. 2.300 litres - bulk density CA. 0, 9 kg / l -Gearbox reconditioned vintage cameras -Swing-arm reconditioned vintage cameras -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.37 of kW Virgin

1 piece NAUTA mixer MBX 40-R -Volume approx. 3.200 litre - bulk density CA. 0, 7 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

1 piece NAUTA mixer MBX 50-R -Volume approx. 4.000 litre - bulk density CA. 0, 6 kg / l -Gearbox reconditioned vintage cameras -Swing arm mild steel Virgin -Container made of stainless steel V2A new products -Mixing screw stainless steel V2A new products -Spout pneumatically driven new product -Drive motors 5, 5kW & 0.55 of kW Virgin

Tonelli 600 stainless bowls stainless bowls for Tonelli 600 model mixer … 28 in stock

Type: UC 80 for Max: 80kg flour for maximum: 120kg dough

1 piece Nauta mixer - Volume at water filling 2,000l - Usable volume approx. 1,600l - Product touching parts stainless steel 1.4301, V2A - double lateral spout, pneumatic

Extruder for food products. producer: model: MU A14342 machine performance: 1200 kg/h year: 2017

NEW SAMMIC Liquidiser with 3 x cutting heads on mobile base for soups omelettes, mayonnaise, 2 speeds 750 / 1,500 rpm

Mix tank Volume : 3000 L Mixing : High Shear Motor : 14 HP Mnufacture date : 2012 Condition : Never Used Heated : Hot water 90c Cooled : Cold water

Plough-charm Content 50 L Stainless steel Double sheath heatable

Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible.

Debotec A-50 mixer Serial: 1215 Stainless 50Kg mixer, tipping bowl to discharge,

Used stainless steel ribbon mixer with a capacity of 3000 LTR by MŁYNPOL model MP-3000. Device for food applications. It has a main agitator and 2 high-speed shredders on the sides. Product loading from the top. Central bottom discharge. Main engine 22 kW. Mixing time 4-5 minutes. Emptying time: 30-60 seconds. Emptying accuracy 99.5%. Rotation of internal mixers (shredders): 920 RPM. Working temperature: -5C to +45C. The device is suitable for the following applications: - spices - sugar, starch - coffee - salt - powder concentrates for the production of ice cream and waffles - powdered sugar, sugar with additives - coffee Tea - cereals - dried fruits - casein - powdered milk - detergents - gypsum, talc - dolomite, cellulose - pharmaceuticals and chemicals - other Dimensions: 5100mm x 1340mm x 1950mm (L x W x H). The device worked on ...

Stock# UG6361 Used stainless steel double cone vacuum dryer blender made in China, type SYZG-50. Contact parts made of stainless steel AISI 316L. Total capacity of the chamber is 50 l. Working volume is up to 25 l and the load weight ranges from 10 kg to 25 kg. Drying chamber is designed to operate at a pressure up to -1 bar and is equipped with an internal vacuum pipe. The drum is covered with 2 kW electric heating mats and is insulated with wool and is covered with SS AISI 304 on the outside. Inlet and outlet are equipped with lockable covers. Drum working speed up to 6 rpm. The chamber is mounted on frame made of stainless steel. Device is equipped with an local electric control panel and a vacuum pump with a water ring. Overall dimensions: length 1500 mm, width 1250 mm, height 750 mm, weight 400 kg.

Bench top high shear granulator/mixer for R&D laboratory usage and small batches; designed for processing of small batches and has the flexibility for scale up. Equipped with 3-blade design with speeds from 50-750rpm; colour touch screen operator interface, the KG-5 is easy to use and generates meaningful product performance data; propeller has a 3-blade design with speeds from 50-750rpm; variable speed chopper (1,000-10,000rpm) and a liquid addition system; standard printer output for recording recipes and parameters from automatic operations; quick release components to facilitate easy cleaning; this extra information is standard for this model. Please always double-check the details during a visit The KEY KG5 High Lab Small Batch Shear Granulator/Mixer is a cutting-edge pharmaceutical machine designed for precision mixing and granulation of powders in small-scale production envi ...

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

APV Liquiverter TB-250-01. yom.1993, excellent condition. Batchcapacity 250 litres. with double wall for heating or cooling during mixing. The Flex-Mix™ Liquiverter is specially designed for products with low to medium viscosity in order to obtain a fast mixing of powders and particles with liquids. The Flex-Mix™ Liquiverter is usable for mixing, dispersion, recombination and reestablishment of soluble products. It is also used for reconstitution of dairy products, manufacturing of fine foods, emulsions, preparation of starch and hydrocolloid solutions

Used semi-automatic batcher granules machine, type DP/3. Production - Italy. New 2005. Stainless steel.

Used batch evaporator for jam production, capacity 300 L, made by Spomasz Pleszew, type WWA20. New 1991. Operating pressure 0.3 MPa, design temperature 133 ° C. Weight 1030 kg.

Batch container 1.500L, heatable, incl. anchor agitator

On and including 15 pallets

On and including 4 pallets

-Basket diameter 410 mm; -Basket height 410 mm; -Drum volume: 25 liters; -Batch max.: 30kg; -Motor power: 1.1 kW; -Speed: 1000 rpm; -Mains voltage: 400 V; 50 Hz; -Control voltage: 230 V; 50 Hz; -Max. back-up fuse: 15 A; -Total approx. 900 x 900 H 1100 mm.

On and including 2 pallets

On and including 4 pallets

On and including 2 pallets

On and including 5 pallets

On and including 25 pallets

On and including 25 pallets

On and including 5 pallets

On and including 15 pallets

Technical data Pulper for vacuum batch operation: Year of construction 2016 Operating hours approx. 3,500 hours Total volume pulper 40 m³ Working volume pulper approx. 28 m³ Stock consistency < 15 Material conveying speed from TKF 0.4 m/second Throughput rate up to 3.5 pulper batches per hour Drive power Pulper Hi-Torc drive 440 kW Max. Rotor speed 3,000rpm. Material types: Leached labels from breweries and mineral water bottling plants, wet-strength papers such as tissue production waste, security papers, etc., moisture content approx. 35 - 50%. Beverage carton and other film-coated papers, moisture content approx. 22% on average Kraft papers such as carrier bags, six-pack, sack papers without foil liner, ambient moisture content average 7% Corrugated cardboard waste and clean paper waste, ambient moisture average 7% Throughput calculation example in batch operation with leached label ...

We offer 42 heat-resistant V2A charging racks including grids for hardening furnaces.

Post Brass round bar, round profile PAGUS Ø approx. 3 to 26 mm MS58 and MS63 length up to approx. 1600 mm approx. 60 kg Dimensions: 1700 x 300 x 200 mm

Item Plastic one-component cold filler GURO GUROSIN - N for GURO-Y joints 1 kV 6 x 59118, in bucket 8 kg (with bucket) 1 x 59134, in bag, 4,, 3 kg = 2.5 l 2 x 59137, in bag, 3.7 kg = 2.15 l 1 x 59134, in bag, 4.3 kg = 2.5 l 4 x 59130, in bag, 2.2 kg = 1.2 l 2 x 59136, in bag, 2.7 kg = 1.6 l 3 x 59124, in bag, 1.1 kg = 0.6 l 2 x 59124, in bag, 0.5 kg = 0.25 l unused ! Dimensions (transport): 800 x 600 x 570 mm

Prodicon Batch Off Unit 500mm sheet width Inlet speed 0-10m/minute Sheet thickness 5-12mm No. of cooling sections 3 No. of fans 9 Complete with electrical control panel. Year 2009

General SKU300U888 LocationBarneveld Main Features MaterialStainless steel Volume1.9 Ltr. Motor1.1 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck Capacitymax. 1,9 Ltr Pan sizesdia. 140x165 mm Bottom dischargecheck With sprayercheck With pumpcheck With electric heatingcheck Capacity4x 440W Motor1,1 kW 380 Volt MaterialStainless steel 1.4306 (304L) Information Floorspace0,7x0,65 m Total height2 m Weight500 kgFluid bed dryers batchGlattDryers > Fluid bed dryers batchBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU307M519 LocationBarneveld MakeBWI Huettlin GmbH TypeKugelcoater HKC-5-TJ No.H 00116 Year of construction1998 Main Features Volume5 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer/coater With pancheck Capacity5 Ltr Pan sizesdia. 300mm Capacity1,5-5,0 KG With sprayer on bottom of pancheck Without fanand without air handlings unit With dust filter5x (dia. 65x430mm) Cleaning with air pulsecheck MaterialGlass, Stainless steel Information Mounted on wheelscheck With switchgearcheck Floorspace1,2,x1,2 M Total height2,0 M Weight550 KG Extra Specifications- Including add. pan, spare-parts and nozzlesFluid bed dryers batchHuettlinDryers > Fluid bed dryers batchBrand > Huettlin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...

General SKU254P358 LocationBarneveld MakeGlatt Process Technology GmbH (DE) TypeGPCG 5 SC No.6778 Year of construction1999 Main Features MaterialStainless steel Volume100 Ltr. Motor18.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck Coatercheck Granulatorcheck With pancheck Capacity100 ltr Bottom dischargecheck Capacity5 KG (granulation) / 20 KG (coating) With sprayercheck With Wurster-pan18 Can be heated by steamcheck With fancheck Capacity750 m3/h Motor18,5 kW, 400 Volt With dust filtercheck Cleaning with air pulsecheck MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) Information With switchgearcheck Floorspace2,0x2,0 M Total height7,3 M Extra SpecificationsGlatt con.zeef GS 100, motor capacity 1,1 KW, n=200-1000 rpm. Equipped with one granulation vessel for top-spray agglomeration of powders and one Wurster coating vessel ...

General SKU300P652 LocationBarneveld MakeNauta Vometec Mikropul Type12 HP 4 TRL BV No.2107500038 Year of construction2000 Main Features MaterialStainless steel Specified Features - Fluid bed dryer batch Fluidbeddryercheck Pan sizesdia. 400mm Bottom dischargecheck With sprayercheck Without fancheck With dust filtercheck Filter surface3.6 m2 Cleaning with air pulsecheck MaterialStainless steel Information Floorspace2,0x1,6 M Total height3,5 M Weight1000 KgFluid bed dryers batchHosokawa MikropulDryers > Fluid bed dryers batchBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU225P203 LocationBarneveld MakeAeromatic AG Verfahrenstechnischer Anlagen- und Apparatebau (CH) TypeT-5 No.879028 Year of construction1987 Main Features MaterialStainless steel Motor15 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan mounted on wheels(2X) Pan sizesDia: 1070x770x500mm Capacity±150kg With sprayercheck Can be heated by steam(4 bar) With fancheck Capacity1,2 m3/S Motor15kw (Ex) With dust filtercheck Mechanical cleaningcheck MaterialStainless steel Information With switchgearcheck(as is) Floorspace1,8x1,5m Total height+/- 6,0m Weight±2700kg ATEX compatiblecheck Extra Specificationswith heat exchanger Brunner AG, Series no. 41479, Build 1987, Capacity 18.5 Ltr, Working pressure 12.3 bar, Max. temperature 200 Degr. C. Technical specs Extra informationpan dimensions 1070 x 770 x 500 mm Fluid bed dryers batchNir ...

General SKU287S360 LocationBarneveld MakeGlatt Process Technology GmbH (D) TypeWSG-CD 60 PD No.4635 Year of construction1987 Main Features MaterialStainless steel Volume215 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan(2x) With pan mounted on wheelscheck Capacity215 ltr (nett 60-120 Kg) Pan sizesdia. 1000x370m With sprayercheck Can be heated by steam(excluding steam generator) With fanFIMA RC4U224MBXGL90 Capacity4500 m3/h Motor18.5 kW 380 volt With dust filtercheck MaterialStainless steel 1.4401 (316) Information With switchgear(As is) Floorspace1,7x1,5 M Total height3,3 M Weight3750 Kg Extra Specificationsthe 2 pans are mounted on a mobile frame. The pan can be closed and then tilted by a lifting tilting installation of the brand Kurt Schaffner AG (CH) with a lid for the pan. After tilting, the lid becomes the bottom and the rel ...

General SKUR1394 LocationBarneveld MakeGlatt Maschinen und Apparatebau AG (CH) TypeGPCG-3 and GPCG-15 No.101341 and 101340 Year of construction1995 Main Features MaterialStainless steel Motor7.5 KW Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pancheck Pan sizesdia. 400x320mm With sprayercheck With pumpMultifix type MAD 30 hosepump MotorAir drive With fanGlatt ventilator type RC2U125MBXGL360 Capacity1008 m3/h Motor7,5 kW 400-690 volt MaterialStainless steel 1.4435 (316L) Information With switchgear(As is) Total height4,6 M Weight1100 Kg Floorspace2,0x1,7 M Extra SpecificationsThe Glatt GPCG/3 fluid bed dryer with serial number 101341 has a pan diameter of 300mm and a pan depth 220mm size 1.6x0.9 m height 2.8 M weight 500 Kg. Included with this installation: 2 mobile carts on which the product pans can be placed. Diameter of the 2nd pan that ...

General SKU049Z226 LocationBarneveld MakeGlatt AG Pratteln TypeWST-CD 120/200 No.101015 Year of construction1991 Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pancheck Capacity500 Ltr Pan sizesdia. 1200x550mm, Pan with rotating bowl-mesh Capacity120-300 KG per batch Can be heated by steamcheck Without fancheck With dust filterAir Handler Unit MaterialStainless steel 1.4401 (316) Information With switchgearcheck Total height7,5 M Extra Specifications- With product discharge silo - With rotary valve for discharging and dosing - With CIP cleaning unit Technical specs Extra informationPan with rotating bowl-meshFluid bed dryers batchGlattDryers > Fluid bed dryers batchBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready  ...

General SKU005B167 LocationBarneveld MakeGlatt AG Pratteln TypeUniglatt No.4110 Year of constructionunknown Main Features MaterialStainless steel Volume3 Ltr. Motor1.1 KW Specified Features - Fluid bed dryer batch Fluidbeddryer(1x) With pan(2x) Pan sizesdia. 140x165mm Capacity0,1-3,0 KG With sprayercheck With electric heating(4x 440 KW) With fancheck Capacity4x 0,440 kW Motor1,1 KW, 220/380 Volt With dust filtercheck MaterialStainless steel Information Mounted on wheelscheck With switchcheck Floorspace0,7x0,7 M Total height1,9 MFluid bed dryers batchGlattDryers > Fluid bed dryers batchBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many ...

General SKU238S138 LocationBarneveld MakeAllgaier Werke GmbH & Co KG (D) TypeWS-CA-S-T-0.40 L No.214 Year of construction2000 Main Features MaterialStainless steel Volume71 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryercheck Granulatorcheck With pan mounted on wheelscheck(2x) Capacity71 Ltr. Pan sizesdia. 650x650 mm With sprayercheck Without heatingcheck Without fancheck MaterialStainless steel 1.4301 (304) Information With switchas is Weight1350 kg CEcheck Floorspace2x1,5 m Total height3,5 m Extra Specificationswith: - blowers - explosion protection valves : - heaters Fluid bed dryers batchAllgaierDryers > Fluid bed dryers batchBrand > Allgaier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...