bag 50 used for sale

A rotating frequency generator generates 60Hz alternating current from 50Hz alternating current. In good condition. The device can be converted into a diesel generator. Manufacturer: YAMADA DENKI CO LTD Type: RFC-3543E; Series: 80155 Power: 350 kVA Input: 415 V; 50 Hertz Output: 415/215 V; 60 Hertz Operating hours: 3624 h Electric motor: AM-355 W; 350 kW; 415 volts; 546A; 50 hertz; 1500 rpm Synchronous generator: M3834; 400 kVA; 415/210 volts; 60 hertz; 1400 rpm

new crankshaft for Mercedes OM-502 Article no.: A 542 030 05 01 incl. TS connecting rod bearings: A 542 030 25 60 (8 pieces) and TS main bearing: A 542 030 07 40 (1 piece)

Screw diameter: 50 mm Displacement: 441 cm³Injection weight in polystyrene: 401 g/PS Injection pressure: 2,268 bar Clamping force: 200 t Lights tie bar distance H x V: 560 x 560 mm Tool installation height min.: 295 mm Opening distance: 750 mm CONTROL: Mosaic Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 0 (retrofitting possible) Pump drive power: -- kW Total connected load: 50 kW Total weight: 13,500 kg Dimensions L x W x H: 6.9 x 2.1 x 2.55 m Terms of payment: 100 % before taking over the machine, net

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Chemineer Ltd PD5M mixing tanks Stainless 500l mixing tanks, top mounted motor with propellor mixer, 0.37Kw motor, 3Ph

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

We offer: Rear wall grille, used Dimensions: approx. 2,200 x 1,500 mm 26 piece(s) in stock 21698 Harsefeld Per piece € 50,00 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

Pressure switch, hydraulic-electrical signal converter ROEMHELD, HILMA, STARK 9730-501 3415395 Pressure range: 50 - 350 bar < -br />max. operating pressure: 600 bar 1 Changeover switch Switching capacity: 28 V DC, 3 A / 250 V AC 4 A Mounting plate: 40 x 40 x 10 mm New ! Dimensions: 87 x 40 x 57 mm

Pressure switch, hydraulic-electrical signal converter ROEMHELD, HILMA, STARK 9730-501 3415395 Pressure range: 50 - 350 bar < -br />max. operating pressure: 600 bar 1 changeover switch switching capacity: 28 V DC, 3 A / 250 V AC 4 A mounting plate: 40 x 40 x 10 mm used, tested ! Dimensions: 87 x 40 x 57 mm

Clamping table, clamping plate, milling table, machine table CMB TD 35/250 Clamping surface: 500 x 400 mm < >Slot thickness: 40 mm Groove width: 12 / 18 mm Groove depth: 21 mm Bridge width: 98 / 178 / 98 mm Guide groove: Width: 50 mm, Depth: 18 mm ( bottom ) 5x slotted hole: Ø 12 x 60 mm spare part for lathe CMB TD35/250 ! used, tested ! Dimensions: 500 x 400 x 40 mm

Roller chain, drive chain -per package length: 5 m -Roller chain -Pitch: 50 mm -Width: 30 mm -1-fold -Number: 4x chains of 5m available -Price: 30 euros/m

Filter bowl, maintenance glass NORGREN 4266-50RF Diameter (filter container): Ø 30 / 35 mm ( inside / outside ) Hose connection for diameter: Ø 6 mm ( inside ) Material ( filter container ): Polycarbonate New ! dimensions ( single filter tray ): 120 x 45 x 38 mm

- Producer MECONAF BV - Gesamtbreite 1.530 mm - Arbeitshöhe 900 mm + - 20 mm - Working width 1300 mm - Length 2500 mm - Roller diameter 80 mm - Roller pitch 150 mm - Motor power 0,75 kW - Voltage / HZ 400 / 50 - Colour 7035 - Location, in stock - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 %

- Producer Barberan - Length 2.500 mm - Working width 1.300 mm - Working height 890 + - 30 mm - FU-Regelung für Feed speed ~ 5 - 25 m/min - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Colour 7035

Mit Lichtschranke am Ende des Bandes für Transportstop - Producer MinkDK - Length 1.700 mm - Belt with 1.220 mm - Working width 1.200 mm - Working height 900 + - 30 mm - Length 1.300 mm - FU-Regelung für Feed speed 2 - 10 m/min - Location, in stock - Voltage / HZ 230/50

- Producer Barberan - Length 2.000 mm - Working width 1.300 mm - Working height 890 + - 30 mm - FU-Regelung für Feed speed ~ 5 - 25 m/min - Voltage / HZ 400 / 50 - Motor power 0,55 kW - Colour 7035

Pneumatic cylinders, screw-in cylinders, round cylinders, double-acting ROMHELD 1175 - 100 Piston diameter: Ø 40 mm rod diameter: Ø 16 mm stroke: 50 mm thread: M50 x 1,00 5 Thread length: 94 mm New ! Dimension ( pneumatic cylinder ): 123 x 50 x 50 mm Dimension ( packaging ): 155 x 70 x 65 mm

Belt cylinder HÖBRIGER-ORIGA Ø 40 x 500 stroke series 120

Pneumatic cylinder NORGREN Ø 100 stroke: 500 mm with passive piston rod clamping

Pneumatic cylinder JOUCOMATIK Ø 125 stroke: 500 mm

Welding fume extraction LINCOLN NORWELD DF-500 Volumetric flow: 500 m3/h System pressure: 1000 mm/Wg ( millimeter water column ) - approx. 0,0,098 bar Fan speed: 9200 rpm operating voltage: 380 V 3AC Power consumption: 5.5 kW Connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm Engine: ATB 132S 5,5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm

Hydraulic power pack, compact power pack, forklift unit BOSCH 0 541 500 025 ( 0541500025 ) Tank capacity approx. 25 l Engine: 0 136 601 007 ( 0136601007 ) 4,5 kW 1900 rpm 24 V DC spare part for electric forklift STEINBOCK EFG1,6T ! used, tested ! Dimensions: 640 x 480 x 320 mm

Timing belt axis linear module INA MDKUVE 15-500 3 ZR AL 05-858-526 Working stroke: 1 490 mm carriage: 500 x 176 mm flange (drive): 115 x 115 mm shaft: Ø 28 mm used, tested ! Dimensions: 2210 x 28 x 130 mm

Rack, straight tooth PAGUS 500 x 25 x 25 mm Number of teeth: 64 tooth spacing: 7,, 85 mm ( module 2.5 ) Tooth depth: 5.5 mm Tooth width: 30 mm Angle of engagement: 20 ° Gearing: straight Length: 500 mm bore ( continuous ): Ø 12.5 mm New ! Dimensions: 500 x 25 x 25 mm

Motor control, drive inverter, frequency converter, inverter SEW MoviMot MM05C-503-00/0/P21A/RE1A/ALA4 8241155 bis 0,37 kW 380 - 500 V with ASI binary slave MLK11A MFP21D/MM03c-503-00/Z27F 1 8231214 used, tested ! Dimensions: 250 x 210 x 125 mm

Radio interference filter, LENZE E82ZZ55234B210 00450969 500 V unused ! Dimensions: 340 x 100 x 70 mm

Thyristor Switch, Solid State Relay EUROTHERM TE10 S TE10S 16A/500V/LGC/GER/PLF/-/-//00 16 A 500 V AC 47 - 63 Hz used ! Dimensions: 110 x 35 x 95 mm

Mains filter B LENZE E82ZN22334B230 00459634 500 V 3 x 42 A unused ! Dimensions: 410 x 240 x 120 mm

Electronic Module, Base Conn Unit ABB DSQC 504 ( DSQC504 ) 3HAC5689-1/04 3HAC4158-1/4 410-0377 used, tested ! Dimensions: 205 x 165 x 35 mm

Electronic Module, Connection Board ABB DSQC 505 ( DSQC505 ) 3HAC5687-1/07 09622 1932460 used, tested ! Dimensions: 205 x 210 x 45 mm

Transmitter for turbidity meter, transmitter IER MEASUREMENT AND CONTROL TECHNOLOGY TRUBOMAT 500/619 Transmitter: TS 500/8 New ! Dimensions ( transmitter ): 121 x 75 x 55 mm

Radio interference suppression filter, mains filter LENZE type LD E82ZZ55234B210 00450969 3x 500 V 3x 16.8 A 50 - 60 Hz unused ! Dimensions: 340 x 100 x 70 mm

Reversing contactor, reversing load relay PHOENIX CONTACT ELR W3-24DC/500AC-9I 2297057 Nominal voltage: 24 V DC Switching voltage (max.): 550 V 3AC Load current: 9 A DIN rail bracket defective used ! Dimensions: 115 x 110 x 25 mm

Series resistor EAW Type: 5.503442 2x wirewound resistance 32000 Ohm 1x wirewound resistance 32600 Ohm Total resistance: 64600 ohms or 64000 ohms New ! Dimensions: 135 x 110 x 90 mm

Power contactor SIEMENS 3TA22 15 kW 500 V AC 45 A coil: 220 V AC, 50 Hz used, tested ! Dimensions: 100 x 85 x 100 mm

Switch socket, socket, portable STAHL 8575/16-506 5- polig 16 A - 6h 240 / 380 - 240 / 415 V explosion-proof ! New ! Dimensions ( switch socket ): 290 x 115 x 160 mm Dimensions ( packaging ): 300 x 120 x 180 mm

CEE plug, plug safety plug STAHL 8571/12-506 150855 32 A-6h 5-pin 200 / 346 - 240 / 415 V 50 / 60 Hz 3P + N + PE explosion-proof ! New ! Dimensions ( Plug and Socket ) : 200 x 105 x 105 mm Dimensions ( Packaging ) : 215 x 110 x 115 mm

Transformer, control transformer PAUL PRENGEL (PREDÜ) PDT 0.6 ( PDT0.6 ) Ve: 500 V Va: 400 V 3,29 kVA Dimensions: 190 x 190 x 100 mm

CEE plug, plug, safety plug STAHL 8579/12-506 152971 63 A - 6h 5-pin 200 / 346 - 240 / 415 V 50 / 60 Hz 3P + N + PE explosion-proof ! New ! Dimensions ( Plug and Socket ) : 270 x 115 x 115 mm Dimensions ( Packaging ) : 280 x 70 x 100 mm

transmitter for active power measurement CAMILLE BAUER SINEAX PQ 502-G313 00K0 60 ( SINEAXPQ502-G31300K060 ) DIN 43807 230 V AC 5 VA Dimensions: 125 x 120 x 70 mm

CEE plug, plug, safety plug STAHL 8575/12-506 16 A - 6h 5-pin 220 / 380 - 240 / 415 V 50 / 60 Hz 3P + N + PE explosion-proof New ! Dimensions ( Plug ) : 160 x 75 x 66 mm Dimensions ( Packaging ) : 165 x 65 x 70 mm

Switch socket, socket STAHL 8575/11-506 16 A - 6h 220 / 380 - 240 / 415 V 50 / 60 Hz explosion-proof used, checked ! Dimensions ( switch socket ): 260 x 100 x 150 mm Dimensions ( packaging ): 280 x 110 x 160 mm

Transformer, control transformer MURR 86 61 39 ( 866139 ) Ve: 400 V Va: 110 V VA: 500 W Dimensions: 150 x 120 x 150 mm

Switch socket, socket STAHL 8575/11-506 16 A-6h 240/415 V explosion-proof ! New ! Dimensions: 270 x 110 x 160 mm

CEE plug, plug safety plug STAHL 8575/12-506 16 A-6h 200 / 415 V 50 / 60 Hz 3P + N + PE explosion-proof New ! Dimensions: 160 x 65 x 65 mm

Switch socket, socket STAHL 8575/11-506 16 A - 6h 220 / 380 - 240 / 415 V 50 / 60 Hz 5-pin 3P + N + Mp explosion-proof ! New ! Dimensions ( switch socket ): 260 x 100 x 150 mm Dimensions ( packaging ): 280 x 110 x 160 mm

Encoder, speed sensor HEIDENHAIN ROD 436.0003 - 5000 ( ROD436.0003-5000 ) 261 436 13 with approx. 1.0 m cable New ! Dimensions: 80 x 60 x 60 mm

Pulse Counter, Electromechanical Counter IVO F 504 ( F504 ) max. 10 pulses / sec 24 V AC unused ! Dimensions: 90 x 50 x 25 mm

Line filter MANN + HUMMEL 67 502 62 026 Filter cartridge: W 920 14 bar 25 l/min New ! Dimensions: 150 x 115 x 100 mm