b 80 used for sale

5,75 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 5,75 m Shelf offer consisting of: 04 x frame approx. 200 x 80 cm , disassembled. 24 x traverse approx. 185 cm. 12 x support shelf approx. 184.5 x 79.5 cm. 24 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 709,00 € net plus legally valid VAT You will receive an invoice with VAT.

3,85 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 3,85 m Shelf offer consisting of: 03 x frame approx. 200 x 80 cm, disassembled. 16 x traverse approx. 185 cm. 08 x support shelf approx. 184.5 x 79.5 cm. 16 x beam / load distributor. Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 519,00 € net plus legally valid VAT You will receive an invoice with VAT.

1,95 LF WIDE-SPAN RACKS 80CM DEEP , WORKSHOP RACKS , STORAGE RACKS , LARGE COMPARTMENT RACKS , MANUAL STORAGE , SHELVING RACKS, DATA: H : approx. 200 cm D : approx. 80 cm L : approx. 1.95 running metres Shelf offer consisting of: 02 x frame approx. 200 x 80 cm, disassembled. 08 x Traverse approx. 185 cm. 04 x Contact back approx. 184.5 x 79.5 cm. 08 x beam / load distributor Incl. locking pins Model : BLT , Type WR20/80 Load: 400 kg compartment load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. Galvanized beam New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 278,00 € net plus legally valid VAT You will receive an invoice  ...

We offer you an asphalt cooker (trailer) from the company Breining. - Price per machine If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. ANB Handel & Service Inh. M. Schönau Halbmondsweg 399885 Ohrdruf

Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg

turning diameter: 800 mm turning length: 3000 mm swing diameter over bed slide: xx mm total power requirement: xx kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor, electric motor, three-phase motor, electric geared motor -Speed: 108 rpm -Power: 0.75 kW -Design: B3 -Shaft diameter: Ø 20 mm -Protection class: IP 54 -Brake -Number: 1x motor available Price: per piece -Dimensions: 425/210/H180 mm -Weight: 20 kg

This Dr. Boy injection molding machine is in machine storage at Plastima Used Machinery. The machine is from 1996 and has relatively few working hours for its age. – Brand: Dr. Boy – Model: 80M – Year built: 1996 – Screw diameter: 42mm – Shot volume: 200 cm³ – Closing force: 80T – Working hours: 24,222

diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width  ...

Pipe grab, round grab, laying clamp, round material grab, scissor grab -Pipe grabber: unfortunately without type designation -Pipe diameter: approx. 350 to 800 mm -Grip diameter: 2 adjustable ranges, see photos -Dimensions: 750/500/H1120 mm -Weight: 126 kg

M. No.: 2067 Working width max. (mm): 800

electric motor, three-phase motor -Manufacturer: Elektromotorenerk Grünhain, electric motor type DOMA 80K2-BW33 -Power: 1.5 kW -Speed: 2860 rpm -Shaft: Ø 19 x 35 mm -Design: B5 -Protection class: IP 54 -Dimensions: 270/200/H230 mm -Weight: 11.4 kg

Electric motor, three-phase motor -Electric motor: Type B14-80x0.75x3000A -Power: 0.75 kW -Speed: 2790 rpm -Shaft: Ø 19 x 40 mm -Design: B14 -Protection class: IP 44 -Dimensions: 275/160/H210 mm -Weight: 11 kg

roller conveyor, conveyor track, roller conveyor support, conveyor track support, support -Support: Adjustable support for roller conveyors or similar -Height: 570 to 800 mm -Width: 480 mm -Number: 19x support available -Price: per piece -Dimensions: 475/130/H570 mm -Weight: 7.7 kg/piece

ressure: 800 tons Number of strokes per minute: 45 Slide stroke: 160 mm Adjustment of rod length: 15 mm Closed height: 630 mm Table size: 860х860 mm Max. distance between table and slide in its lower position: 630 mm Distance between guides: 670 mm Height of a table above floor: 700 mm Main motor power: 28 kW Press dimensions: -Left-to-right: 2290 mm -Front-to-back: 2800 mm -Height: 4910 mm Press weight: 31,8 tons

max. width of grinding wheel: 145 mm diameter / bore of grinding wheel: 300 mm Flange taper: Reishauer 0 grinding wheel size: 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 3,75 EW20° 3GG Cubitron blue from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 2000 mm, 800 mm

Model V 800 Machine no. 1049.2955-07 Year of manufacture 1980 Circumferential diameter over bed 800 mm Turning length 2,000 mm Center width 2,000 mm Spindle bore diameter 128 mm Number of bed sleds 1 Quill Cone Morse 6 Voltage 380 V Three-phase current 50 Hz incl. documentation

Switches, pushbuttons -Type: 800MR PA16 -Max.: 300 VAC Price: per piece -Number: 23x Available -Weight: 0.15 kg

CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...

A large stainless steel pressure tank is sold. Specifications: Manufacturer: BAM Freising Capacity: 8.000 Ltr. Year of Make: 1961 Pressure: 5 bar Papers available Dimensions: LxD: 3,800x1,800mm

control: Siemens Sinumerik 840D table load: 0,7 t work piece spindle speed: 200 - 2300 U/min total power requirement: 12 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: PERKINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Working Hours: 1282 Hour(s), Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Rated Power: 123 Kw, Rated Speed: 2600 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/perkins-1006-6-pump-800-bar-used/17 876, , = More information =, , Type number: 1006-6 POMP 800 BAR

Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK

BT pallet lifter, max. lift 800 kg to up to 600mm. In very good condition, excellent quality steel from Sweden.

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Spindle bore87 mmDiametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range25 - 5000 rpmAccuracy at point stopping0,01 degreeFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive s ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle diametre on front bearing160 mmSpindle bore102 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmLongitudinal stroke850 mmTransverse stroke300 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)4,46 x 1,88 x 2,30 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

Manufacturer: Bürkle doppelseitige Struktur und Reinigungsbürste, Type: CGM 800, Year: 1984, Control: no, Monting of the machine: 2 X Anderlon 250 mm 2 X Fibre, Number of units: 4, Engine power - kW: ca.7,5 über Getriebe Anderlonbürsten 2 X 2,2 Kw Reinigungsbürsten, Diameter of brushes: 250 mm / 150, Number of rotations controlled: Struckturbürste, Working width mm: 950, Through running hight mm: 120, Struckturieraggregat: 2, Feeding speed continous adjustable: über Umrichter möglich, Year :1984

Manufacturer: Bürkle, Type: EFA 800, Year: 1984, Working width mm: 600, Veneer thickness min mm: 0,15, Veneer thickness max. min: 0,7, Feeding speed max m/min: 8 - 35, Feeding speed continous adjustable: yes, Year :1984

Key data: 805 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ...

pressure: 8,0 kN stroke: 40 mm throat: 90 mm Working height from to: 50 - 200 mm table surface area: 120 x 160 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x410 mm Knee lever hand press with fine height adjustment SPECIAL PRICE! • Working height adjustable by simply loosening the clamping screws on the stand • Working height fine adjustment for HK 800 = adjustment of the press head to the desired working height. The fine adjustment takes place forced in both directions via a threaded spindle • Hand lever arranged in a user-friendly manner, return via spring The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 800 t distance between columns: 2560 mm stroke: 1050 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 395 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 200 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine underwent a general overhaul in 2015 The following tasks were performed as part of the overhaul: repair of the electrical cabinet and hydraulics, scraping of the bed and table, replacement of bearings in the headstock, new springs for the axial bearings, new table piston rod and sleeves, installation of sludge separators. Documentation for the machine is available. Year of manufacture: 1980.

turning length: 3000 mm turning diameter: 800 mm turning dia. in gap: 1000 mm turning diameter over slide: 540 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3820 kg. dimensions: 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 100 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Rapid traverse lengthwise and facewise - Slip clutch - Coolant system - Quick-change tool holder with 4 inserts - Protective device for qu ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range- 5000 rpmDrive power (40% DC)32 kWMax. torque (40% DC)360 NmC-Axis Speed-5000 rpmTorque of C-Axis (holding torque)280 NmT ...

Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning gt; vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm - hydraulic clamping on table - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... gt; machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position to ...

gebr. Boiler ------------------------------- - mounted on frames - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.0 bar Water capacity at NW approx. : 748 l Water content full approx. : 1.108 l Year of construction : 1996 equipped with Weishaupt combi burner GL3/1-E, ZMD, 90-630 kW, gas control section, feed water pump, control cabinet and the existing coarse and fine fittings.

General SKU309T740 MakeBEBA Mischtechnik TypeBM 800 LocationBarneveld Main Features MaterialStainless steel Motor3 KW Rotor70 mm Specified Features - Foam mixer Foam mixer:oscillation method: Rotor/Stator with pinscheck Rotor sizesdia. 70 mm InletDN25 OutletDN25 Motor3 kW 400-690 Volt With frequency controllercheck With MonopumpNetzsch NM021RY Motor0,75 kW Netzsch NM021RY Speed301 rpm Capacity40-300 Ltr/h MaterialStainless steel 1.4571 (316Ti) With jacketcheck General With switchgearcheck Floorspace2,5x1,2 m Total height1,1 m Weight680 kg CEcheck Extra SpecificationsWith tank: ± 200 Ltr., with jacketFoam mixersBEBA MischtechnikMixers > Foam mixersBrand > BEBA Mischtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

General SKU429T1358 MakeBrabender OHG Duisburg TypePlasti-Corder PL2000, Eurotherm Type 808 No.814 300 LocationBarneveld Main Features Inlet diameter15 mm L/D25 Specified Features - Viscosity test machine Single screw extruder(and with double) Screw diameter± dia.15 mm L/D± 25 Number of heating zones:1 With jacketcheck Air coolingcheck Inlet± Ø 15 mm Feeding with hoppercheck Max. temperature500 °C With jacketcheck Viscosity test machines MaterialStainless steel General Floorspace1,45x0,55 m Total height0,8 m Weight280 kg Extra Specificationswith two diffirent extruders headsViscosity test machinesBrabenderPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the mach ...

turning diameter over bed: 840 mm turning diameter over slide rest: 640 mm turning length: 3300 mm spindle bore: 74 mm turning speeds: 7,1-1400 U/min 3-jaw chuck: 315 mm steady: rapid traverse: turning dia. in gap: 920 mm length of gap: 370 mm total power requirement: 22 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 8x2x1,8 m Multifix steel holder with inserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. W ...

turning diameter: 820 mm turning length: 6000 mm turning diameter over slide: 520 mm Holder Multifix: control: Siemens type: 805 tailstock quill taper MT: 6 transmission ratio: 2 turning speeds: 8-1600 U/min bed width: 560 mm spindle bore: 128 mm faceplate: 600 mm 3 jaw chuck Forckrath: 400 mm steady: 250-500 mm chip conveyor: diameter of quill: 125 mm quill stroke: 280 mm total power requirement: KVA weight of the machine ca.: 12 t dimensions of the machine ca.: 9,5x2,5x2,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, p ...

This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information about this machine.

This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Located in Germany, contact us for more information.

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, its ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine.