automatic used for sale

Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.

Automatic filling plant Logdos Späth GmbH Type K-DOS. F/AL 40/ EX EX protected mobile on wheels Programable X/Y axis and pallet image Very good condition, directly from production!

Graham labeler COUV 128-40 with tripod, Y.O.M. 2001

Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.

KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.

Bertolaso Athena 75/15 Vacuum filler Bertolaso Year: 1991 with 75 filling valves and 15head aluinium screw capper Running direction: left to right

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

Libra / labeler Bizerba GV 7000, built 1999, in a very good used and functional condition. Fully automatic scale with labeler / price printer, programable, feed and feed belt. Dimensions W/D/H 260/65/170 cm. Operating voltage 230 volts, compressed air connection 6 bar required. Workshop-tested, ready for immediate use. More on request.

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Schuette multi-spindle rotary machine SF 26-6 1980 built -with thread cutting device - prepared for centrage suction system - standard Schuetz control D8gdo29 - mechanical gearbox - Balluff cam switch - standard rod guide

Thread cutting gear Pick-up device partially revised

Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Cmvlgfoyc - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

Schuette multi-spindle rotary machine SF 50/51-6 Rod turning machine run on schneidoel standart Schuetz control mechanical gearbox Hydraulics integrated into the machine with snail-spaenefoerer

Schuette multi-spindle rotary machine SF 26-6 1984 built - mechanical gearbox - independent feed from the Laengsschlitten Position 4 - Thread cutting gear with thread cutting spindle

Manufacturer: Microcut, Type: Fagor CNC 800T, Year: 2010, Control: Programm, Year :2010

Böllhoff Uniquick Vario automatic screw feeder UNIQUICK Feeder Type 360 Plastic sorting pot ∅ 360 mm Quiet and surface-friendly conveying Optimal spiral dimensioning depending on the material to be conveyed (width and height) Integrated and controlled chicane High wear resistance Uniform flow rate due to amplitude control In a soundproofed housing on a frame Web width: 20 mm Head Ø of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Tape Bunker Bunker trough, chute: stainless steel Strap: white with FDA approval Filling volume: 10 litres Max. filling weight : 35 kg Drive: AC gear motor 230V/50Hz Bunker with innovative drive to ensure metered, quiet and part-friendly feeding of screws and connecting elements. UNIQUICK Multi Modularly expandable 3-fold crossover Distributes the tested screws to three st ...

Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

Gildemeister 6-spindle rotary machine, curve controlled max. rod passage: 32.0 mm for rods up to 3.30 m - incl. rod guide, - Steel processing, run with cutting oel - easily equipped with tools Sowiabeb - 1 set of clamping and feed pliers - Alternating wheels (on machine) - 1 set of curves for cross slides - 1 set of curves for main slide

BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...

GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

Schuette SG 18-6 with gantry loader as feed lathe alternatively conversion possible as a rod lathe, incl. spindle stop setup Location 3+4 with extended stroke CNC cross slide on layer 5 Etc. Machine is ready for use and can be visited under electricity loading device is not currently connected.

ID3599 Aquachem Automatic filter machine / Filterautomat AF 800 year/Baujahr 2020 Automatic filter machine, Filter volume: 154 dm3, filter area: 9.9 m2, filter plate format: 800 x 800 mm, number of chambers: 10, cake thickness: 32 mm, plate type: sealed chamber and membrane plates, feeding: up to 8 bar via the external inlet at the top, membrane repressing: pneumatic repressing system with internal air distribution and ramp-controlled pressure build-up (max. 15 bar), cake emptying system: AIRDIS cake emptying system and vibrating cylinder integrated in the filter plate handle, press locking: automatic, self-regulating electric/pneumatic/hydraulic locking system, drive: 0.75 kW, 400 V, 50 Hz, with control system, with connection and drain distributor, feeding unit (peristaltic pump), rinsing station, only in use for 1 year Automatic filter, filter volume: 154 dm3, filter area: 9.9 m2, ...

Schuette multi-spindle rotary machine SF 26-6 1987 built 6-spindle rod turning machine with hydraulic catch slide prepared for Co2 Loesch plant run with cutting oel Schuetz control mechanical gearbox separate hydraulic unit -- Pick-up device with hydraulic voltage and back-weighing machining without Spaenefoerderer standard pole guide unabhaenger Laengsschlitten feed to position 1,2,4,5 ...

1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

Index HE 25 with rod feed hydraulically controlled with long turning device

Stock# UG6391 Automatic machine for lipstick filling Manufacturer: Cosmatic Model: SM43 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2016.

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Mechanical high-efficiency automatic press Pressing force: max. 150kN Ejection force: 50kN Die support in pressing position: max. 150kN Return force of lower punch: max. 32kN Closing force of upper punch: max. 12kN Upper punch stroke: 90mm Upper punch adjusting travel: 60mm Stroke rate: 8...40strokes/min

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

with rod pipe

various accessories / spare parts for Tornos AS 14

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg

MAX DIAMETER OF ROD: 100 MM MAX CUTTING DIAMETER: 552 MM MAX TURNING LENGTH: 1.195 MM TURRET: 16 ROTATION SPEED: 2800 RPM CONTROL: FANUC 32 B INCLUDES: AUTOBLOK STEADY SLU-3.1 – ZS CAPACITY: 20-165 MM AUTOMATIC FEEDER FOR BARS BREUNING – MOD. MUK 10016-II

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

General Manufacturer: Citizen Type: Cincom K 12 E Year of Make: 2007 Control: Citizen Cincom Number of axles: 7 Outer diameter: 12 mm Turning length: 200 mm Thread diameter: 8 m Spindle Passage: 20 mm Spindle Speed: 200 – 10,000 t/min Tapping diameter: 5 m Sub-spindle Speed: 0 – 10,000 t/min Workpiece length for counter-machining: 80 mm Tool Carrier Number of driven tools: 4 Speed of the driven tools: 6,000 t/min Drive Connection 50 Hz 3x: 400 Volts Spindle motor: 3.7 kW Dimensions and weight Dimensions: 2,020 mm x 1,070 mm x 1,680 mm Weight: approx. 2,250 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Bar Feeder Iemca Genius 118 32U High frequency spindle 80,000 rpm

BIESSE - Multi-spindle drilling machine Model BEAVER Year 1982 Manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm horizontal Drilling motor 2.2 kW Vertical drill motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs. pneumatic answers with kSsi control levers Weight 865 kg L x W X H 280cm x 150cm x 150cm

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

TSUGAMI B0385L Swiss-Type CNC Sliding Headstock Lathe Year: 2014 Condition: Tooling included (as shown in photos) Specifications subject to buyer verification Machining Capacity • Max barstock diameter: 32 mm • Max machining length: 100 mm • Max main spindle drilling diameter: 13 mm • Max main spindle tapping: M12 • Max back spindle chucking diameter: 38 mm • Max back spindle drilling diameter: 12 mm • Max back spindle tapping: M12 • Max cross drilling diameter: 10 mm • Max cross tapping: M8 • Max tool spindle slotting cutter diameter: 45 mm Spindle Speeds • Main spindle speed: 200 – 6,000 RPM • Back spindle speed: 200 – 7,000 RPM • Tool spindle speed: 200 – 5,000 RPM Tooling & Axes • Total tool capacity (standard): 20 tools • Tool size: 20 × 20 × 125 mm • Controlled linear axes: 5-axis Ra ...

E.C.H WILL ROTEX – TRI Year: 1987. One real stand. Diameter 1.2 max width 96 cm 4 hole perforation Print 2/2 Cross cutter 2 cover feeder Counting and collecting, Stitching unit Folder, Square back press. Long side cutting/short side cutting Speed: 400 m/ min Max 60 stroke/ min Cross Cuter: 300 mm, 355 mm, 420 mm and 455 mm From spare parts have gears for sheet count, knifes, stitching heads, printing cilindars.

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

Semi-automatic flocking system The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. The handheld boxes hung on a chain conveyor belt and were first sprayed with glue by hand. Afterwards, the boxes were sprayed with the flocking material in the individual flock cabins. The spraying direction changes from station to station.

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

SSI Schaefer Logimat SLL Vertical Storage Lift The SSI Schäfer Logimat SLL is an automatic vertical storage lift that was developed for the efficient storage and picking of small parts according to the goods-to-person principle. It is characterized by high storage density and ergonomic ease of use. Features and Benefits Goods-to-person principle: The system automatically brings the requested tray to the operating opening, which minimizes walking distances for personnel. Space optimization: The Logimat measures the height of the stored items and dynamically optimizes the storage height, resulting in a very high storage density on a minimal footprint. Ergonomics: The operating opening (LOGI Gate) can be positioned at different heights to ensure ergonomic removal. Optionally, the depth of engagement in the tray can be further reduced, which reduces the strain on the operator. ...

Semi-automatic flocking system Flockkabine MAAG flocking technology The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the parts were coated for the automotive industry.