automatic used for sale

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

Complete Automatic Line Packaging Trays. Composed by: - Interlocking Cardboard Tray Former Model Vara Year of Construction 1992 - Belt conveyor elevator for multi-head weigher - A304 stainless steel vibrating screen - Linear Multihead Weigher 10 Heads Opem Inox A304 Year of Construction 1992 With Base - A304 Stainless Steel Flow Pack Packaging Line Conveyor Belts - Technopack Flow Pack packaging machine Year of construction 2001 Max Speed 60 Pcs / min. 10.4 Double Coil Automatic Exchange Touch Screen Panel.

Laser welding machine Automatic Letter Bender ALB SPEED MASTER 500W DUAL It is barely used, we have used it 4 times. We bought it for a project that ended up not working out. 500W Year 2020

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

Universal Automatic tablet testing system - Measuring equipment for laboratories - Tool for tablets Allows to test : Hardness Diameter Thickness Weight Accuracy Scale Sartorius WZ64S Range: 10 to 50 g Unit: mg / 0.5 mg / 0.1 mg adjustable Thickness Drive: stepper motor. Measuring principle: Linear potentiometer. Unit of Measure: mm or inch. Tolerance; +/- to.1 mm Hardness Drive: stepper motor. Measurement: Load measuring cell (lmz) Measuring principle: Torque gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of Measure: mm or inch. Range: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0,1 mm Voltage: 100 / 240 V, 50Hz / 60 Hz The UTS is a universal and fully automated test system developed for use in industry. This tool is the approved model of a series of test systems that have been tested for man ...

Semi-automatic machine 220 V Electric box with disconnecting switch Reset system for screwing head Bottles from 30 to 365mm height Bottle holder tray (manual height adjustment) Current tooling : 1 screwing head covered with rubber with 3 brackets. Head foot for ? 31. Possibility to change head for other format / use or crimping, capping, ...

Automatic machine for the production of bags with the use of a sealing matrix, used by us for the production of ice cube bags. The machine is equipped with a welding and cutting knife, foil feed length adjustment, foil forming device (self-closing pouches), a conveyor belt collecting pouches and a movable table with a pouches counter. The machines have additional equipment in the form of a die for the so-called eurozawieszki and additionally 5 different matrices (with different patterns of bags). The machine is powered by a three-phase voltage of 380V. A pneumatic system is also used for its work. It was produced in 2014, and has not been used since 2020 (beginning of the pandemic).

Multi-storey tunnel oven of Daub type CCTO 20.96.6 with thermal oil system with 6 floors incl. hinged plates for sale. -6 floors each 2000mm wide and 9600mm long -Total baking area 115.2 sqm -Lights passage in floor 180mm -Steam zone 1200mm -Temperature zone classification stove 1- 3 is top and bottom heat common -Temperature zone classification stove 4- 6 is separated from upper and lower heat -Oven compound outside 3000mm wide 10360mm long and 3250mm high -oven weight approx. 40 ton -with 6 pull-off trolleys including 12 pull-off apperates -Wagenkrabbler -with thermal oil boiler -with compensating container and drain container -oven is in operation and can be visited on request

Description Carpet type: Smooth Canvas Belt Length: 1500 mm Useful Belt Width: 210 mm Minimum Belt Height: 600 mm Maximum Belt Height: 700 mm Power supply: 400 V

Part no: 29510910, 35PSI, DUBLEX FILTER. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic scr ...

REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.

AUTOBOX HIPAK 2675 AUTOMATIC BOXMAKER Year of production: 2008 Max 2400 mm Min 100mm x 330 mm Blade clearance – blade distance max 1400 mm blade clearance – blade distance Min 65 mm Knife width 8 mm Machine is in good condition can be seen in production in Europe

Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago. max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar. Material to be processed: welding and staple wire, max. tensile strength: 1600N/mm². Wire diameter: 0.8 - 1.0 - 1.2mm, tolerance on max. diameter: 0.05mm. Support: K300 - D300, weight of spools/wire baskets: 15 - 18 - 20kg, weight: approx. 3000kg, mit Dokumentation.

Type: NT 620 To work with boneless meat Loading width: 620 mm Product height: 130÷220 mm Steaker head: 700 steaker needles (2 х 350) El.connection: 400/440 V, 50/60 Hz El.connection value: 8,0 kW ; 17 А Machine dimension in mm: Length: approx. 2200 Width: approx. 1250 Height: approx. 2200

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

dimensions of saw-band: 3650x27x0,9 mm speed: 15-100 m/min vice: 335 mm capacity 90 degrees: round: 300 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260/200 mm capacity 45 degrees: square: 250/180 mm capacity 45 degrees: flat: 270x200/200x160 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW weight: 1.105 kg dimensions: 2700x2300x1800 mm Fully automatic electro-hydraulic band saw with multi-micro processors and additionally semi-automatic, semi-automatic-dynamic and manual Function. - Automatic cycle (cuts from 0 ° to 60 ° link). CNC machine with two controlled axes that allow for the same material thickness 1000 various editing programs, each with a different cutting length and quantity, too program. - Semi-automatic, semi-automatic- ...

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 880 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,84 t dimensions of the machine ca.: 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE Fully automatic miter band saw • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to ente ...

Böhl Junior /S 450 - TVP fully automatic wrapping machine Böhl Junior /S 450 - TVP fully automatic wrapping machine for all types of profiles and long goods Product Dimensions Width 175 – 320 mm Height up to 45 mm Length 1,000 mm to infinity Maximum cross-sectional diagonal 420 mm Packaging materials PE stretch film thickness approx. 17 – 50 my (recommended 23 my) Roll diameter 250 mm Roll width 80 mm Core Diameter 76 mm Specifications Machine dimensions: Width 1,700 mm / Depth 1,500 mm / Height 2,100 mm Weight approx. 1,500 kg Max. speed 20 m/min (frequency controlled) Control voltage 24 V DC Connection voltage 400 V – 50 Hz, 3 phases Power consumption approx. 3 kW Noise level 79 db Manual cutting and clamping device for the packaging material Automatic Product Recognition Automatic motorized product transport Manual height adjustment of the win ...

Automatic labeling and packaging line LABELING DEVICE manufacturer: PROMARK PRODUKCJA sp. Z o.o. Year of production 2019 Labeling machine Promark Production model Compact RI x 2 pieces Labeling set for applying self-adhesive labels around the circumference of cylindrical packaging. The RI boxer rotation system is characterized by high labeling precision and the ability to apply a label and counter-label. Compact RI is suitable for installation in automatic or manual production lines. Label drive: high-end 12.2Nm stepper motor Control: PLC, color touch panel, intuitive menu in Polish, English, Russian, optionally any Label roll - core size: 40 or 76 (recommended) mm Label roll - external dimension: 270 mm (410 mm - optional) Minimum label size: 10 x 50 mm (W x L) Maximum label size 50 x 630 mm (width x length) other heights in options Capacity: Up to 3600 pcs/h P ...

cutting diameter: 350 mm saw band length: 4160 mm cutting width: 400 mm : 350 mm : 350 x 350 mm Capacity 90° rectangular: 400 x 350 mm speed: 20 -100 m/min main drive: 2,2 kW hydraulic pump: 0,37 kW coolant pump: 0,12 kW dimensions of saw-band: 4160 x 34 x 1,1 mm work height max.: 860 mm total power requirement: 2,9 kW weight of the machine ca.: 1030 kg dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m Description: • Fully automatic miter band saw for sawing thick-walled Profiles and solid materials • Motorized roll feed of the material with electrical contact stop • Delta touch screen controls • Miter cutting, up to 45 ° • 1 program with 10 steps • Length accuracy 0.5 mm The feed length of the material is manually adjustable via an Microswitches selected that • Robustly constructed monoblock saw frame with hydraulic vertical movement and linear guide • Rapid advanc ...

LIQUIDATION of labeling and automatic weighing train of the German manufacturer BIZERBA model GV1260.  Automatic labeling and weighing system for packaged products in the food area, cardboard boxes, large containers. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of ribbon width 650 mm long x 600 mm wide. Minimum and maximum dimensions of the package: length 100 mm-600 mm, width 50 mm-600 mm, height 20 mm-350mm. External dimensions of the machine: (mm) 2150 long x 1000 wide x 1880 high. Thermal print head - 8.0 point resolution. Weighing from 5gr to 30.000gr. Maximum labeling capacity 32 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and ...

SENFENG FLK 120 automatic mask making machine manufactured in 2020 in China, is used for the fully automatic production of masks consisting of three layers of fabric materials. The masks produced are used in the medical industry, as well as protecting us in everyday life by filtering harmful substances in the air, such as dust and bacteria. The machine producing surgical masks automatically cuts, folds and stitches the fabric used in their production. Ear bands with a diameter of 3 mm, as well as nose strips with a width of 2 to 3 mm are added to the masks. The mask making machine guarantees a high production output, producing 90 to 120 masks per minute with a production quality rate of up to 98-99%. The surgical mask making machine is equipped with a Delta PLC controller featuring a touch screen, making the work on the machine much easier. The total weight of the automatic mask ma ...

Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.

Traysealer Ilpra model Food Pack Tank with vacuum pump Bush. As characteristics of the machine we highlight the following: automatic film collector, macula detector for printed film, new BUSCH vacuum pump of 63 m3, input feed belt for trays in automatic, Exit of the machine by dragging by chains to roller outlet, prepared to pack with protective atmosphere, with vacuum and only heat-sealed. Automatic traysealer, works at cycles of 2 trays and production capacity of 12 cycles per minute with heat sealing with vacuum and gas. The heat sealing machine performs a welding process from one thermoplastic to another thermoplastic or other compatible material, using heat and pressure.  It is used to make a protective atmosphere by extracting oxygen from inside the container and replacing it with an inert gas, or it only performs the sealing action and can also be sealed with vacuum. The machine  ...

cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, horizontal band saw automatic band saw type C-916A -Cutting data flat: approx. 410 x 230 mm -Cutting data round: approx. 230 mm -Cutting data square: approx. 230 mm -Saw band speed: continuously adjustable, 15 - 120 m/min -Motor power: 3 KW -Saw band: approx. 4014 mm -Coolant system: available -Dimensions: 2080/1400/H1390 mm -Weight: 670kg

Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: DoAll, horizontal band saw automatic band saw type SBA 260 AU -Cutting data round: 270 mm -Cutting data square: 270 mm -Saw band speed: continuously adjustable, 20 - 120 m/min -Motor power: 2.2 KW -Saw band: 3860 mm -Coolant system: available -Dimensions: 2100/2070/H1300 mm -Weight: 1280kg

: neu : ca. 10 Wochen ab Auftrags : Italien : 17700 € : 362.85 € : Schwenkrahmen : 3010x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 260 mm : 240 mm : 330x120 mm : rund 200 mm, quadrat 190 : rund 120 mm, quadrat 115 : 220 mm : 835 mm : 0.12 kW : 0.37 kW : 2800 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/stroke variable cutting pressure. Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices mat ...

: neu : ca. 10 Wochen ab Auftrags : Italien : 25680 € : 521.3 € : Schwenkrahmen : 3270x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 300 mm : 240 mm : 420x200 mm : rund 240 mm, quadrat 230 : rund 170 mm, quadrat 170 : 220 mm : 835 mm : 0.12 kW : 0.37 kW : 3220 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 800 mm/stroke chip conveyer (CNC/Touch) variable cutting pressure Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices suggested  ...

Automatic tube cutting machine using a SIMEC saw cutter, Mec 120 M CNC model, designed for cutting metal or non-ferrous tubes with a diameter of 12 mm minimum to 100 mm maximum, round, square or rectangular section. Managed by Siemens S7 automaton and industrial PC with Galiléo” software with calculator and cutting optimization (angle or straight). Automatic loader, inclined plane type for bars up to 6.5 M Automatic feed by feed clamp driven by brushless motor: speed: 1M/s Automatic head rotation + - 60° for angle cuts Unloading of cut pieces (max: 2000mm): 2 positions

: neu : ca. 10 Wochen ab Auftrags : Italien : 19280 € : 395.24 € : Schwenkrahmen : 3120x27x0,9 mm : 35/70 (PLC) m/min : 20-100 (CNC/Touch) m/min : 280 mm : 240 mm : 330x240 mm : rund 225 mm, quadrat 215 : rund 140 mm, quadrat 140 : 220 mm : 835 mm : 0.12 kW : 0.37 kW : 2800 mm : 2050 mm : 1900 mm : 1090 kg VERSION PLC: adjustmen of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7", touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 600 mm/stroke variable cutting pressure machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) collant equipment automatic saw blade breakage detection hydraulic clamping vices material chute suggested max.  ...

AUTOMATIC LAMINATOR B&F MECCANICA DRY -Year 2004, High pile -Min paper thickness 110 grms/Sqm- Max 350/400 grms/Sqm -Max mechanical speed: 100 m/min -Min. format sheet: 300 mm x 280 mm -Max. format sheet: 1030 mm x 1400 mm -Max roll diameter : 400 mms. -Electric power machine: 24 kW -Compressed air: 6 bar -Automatic MABEG feeder, Suction feeder table -Diathermic oil-heated calander with MTA autonomous thermal unit -Automatic sheet separator -Automatic stacker in delivery -Complete italian made, In production, available in May

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration

Palletizer ACMI – mod. RASAR P 135 – automatic: Year: 2001 Producer: ACMI -MACHINE IN VERY GOOD CONDITIONS 1) Machine suitable for cartons and packs 2) Automatic pallet loading system 3) Aquifer system provides automatic 4) Perimeter protection 5) machine with wrapper robopack 2001 -MACHINE TOTALLY RECONDITIONED Code R 2

LIQUIDATION of pneumatic automatic stuffing machine of the manufacturer Maquinaria cárnica Serrano SL, for collagen or natural casing. Manufacturer SERRANO, AUTOMATIC model, semi new condition. Machine for stuffing loins, headboards etc The machine can stuff products in: fibrous casing, plastic casing or collagen and natural. Machine adaptable to any type of fibers. Maximum embuchado dimension 700 mm. long. Maximum working pressure 6 bar. Fully pneumatic operation. Knee drive, fully automatic. Production of 350 cycles/hour. Built entirely in stainless steel. Easy and fast mold and funnel change system without tools. Embossing diameter 80 mm. Machine approved according to CE regulations.

Automatic Slicer BIZERBA. It adds value to the presentation of the products. It uses a fully automatic slicing system. Which sums up in a saving of time and efficiency. Model: A404 FB. With conveyor belt and 400mm trolley. Manufactured: Stainless steel. AISI.304 all the part that is in contact with food, such as: The trolley, the stop plate and the blade cover Cast anodized aluminum: The machine and motor box. Enameled cast iron: Drive box. It complies with the Regulations and Conditions related to hygiene in the food sector. Drive of the trolley through a motor, with automatic approximation of the genre to be cut and with a depositing system of cut gender on conveyor belt. It includes different product placement and cutting programs. Keyboard system: touch with intuitive symbols. They ensure its handling with ease. The units of the Bizerba A404FB series are built according  ...

We sell slicer, fully automatic vertical sausage cutter, of the German brand GRAEF, model VA 300. Made of stainless steel and anodized aluminum. Ideal machine for automatic slicing depositing stacked in the form of staggered. It has different ways to set working speed. Graduation of the thickness of the manual slice. Equipment completely rebuilt and overhauled by GRAEF technical service. Stainless steel cutting blade of 300 mm diameter. Product tray measurements: 420 mm long x 220 mm. Machine dimensions: 900 mm x 670 mm x 560 mm high. Cutting thickness: 0 to 10 mm infinitely variable Cutting length: 210mm Cutting height: 175 mm Cleaning and maintenance applications are developed with ease. Power 230V, 50Hz, 0.5Kw, 2.4 A . IP33 Weight: 75kg. Slicer, semi-automatic slicer, meat cutters, industrial meat cutters, industrial slicer, meat machinery, sausage machinery, food slicer. I ...

Automatic traysealer is sold, for preformed containers. From the manufacturer Ross Industries, model S45. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 1 sealing lasts. Dimensions of the welding area Last for sealing 3 containers at once: 250 x 180 mm. Busch 250m3/h vacuum pump Used Ross Inpack S45 preformed tray sealing machine with: Medium to high speed modified atmosphere packaging Time, temperature and pressure are monitored and controlled to provide consistent seals Contoured filler plates for minimal gas use Unique film media design to minimize film waste Automatic tray loader 3 up configuration 13 ...

Automatic traysealer is sold, for preformed containers. Semi new used equipment. From the manufacturer ULMA, model TAURUS 300. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 1 sealing lasts. Dimensions of the welding area Last for sealing 2 containers at once: 250 x 180 mm. Busch vacuum pump of 100m3/h RED special for injection of OXYGEN with values greater than 20%. Automatic tray sealing machine Ulma Taurus 300 • Overall dimensions 2300 mm long x 1000 mm wide x 1750 mm high, input tape 1000 mm long. • power 7 kW; • power supply 400 V, 50 Hz; • Mold 250x180 mm x 2 containers. • film width 460 mm; ...

Automatic vacuum packaging machine. Manufactured by VERIPACK model VKB23 / VKB039. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and anodized aluminum. The machine is ready to plug in and work with. This automatic vacuum system, which includes an outlet belt assembly, is a flexible solution for fast and automatic vacuum packaging. Characteristics: Dimensions of the vacuum chamber internally: 1110 mm x 1200 mm. Bell height 230 mm. Distance between sealing bars: 850 mm Useful length of sealing bars: 1080mm Total machine dimensions: 1650 mm high, length 3200 mm, width 1450 mm, 1090 mm working height. Output tape dimensions: 2000 mm long x 850 mm wide x 1090 mm high. Electrical power: 6.5kw, 380V 3 PHASES, 50-60Hz. Pneumatic power: 6-7 bar. Equipment fully overhauled, reconditioned  ...

LIQUIDATION of automatic vacuum packaging machine. SUPERVAC brand, model GK 169 B. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and anodized aluminum. The machine is ready to plug in and work with. This automatic vacuum system, which includes an outlet belt assembly, is a flexible solution for fast and automatic vacuum packaging. Characteristics: Dimensions of the vacuum chamber internally: 900 mm x 750 mm. Bell height 170 mm. Useful length of sealing bars: 650mm Total machine dimensions: 1550 mm high, length 2100 mm, width 1200 mm, 1090 mm working height. Electrical power: 6.8kw, 400V 3 PHASES, 50Hz, 17 A. Pneumatic power: 6-7 bar. BUSCH vacuum pump of 250 m3/h. Equipment fully revised, reconditioned and guaranteed. RE-RELEASE, OCCASION. NEGOTIABLE PRICE. Transport costs on behalf of the buyer. If you ne ...

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...

1 fully automatic film multi-shrink system With 2 identical Meurer films individual packaging Shrinkage systems. Shriveled 200 ml packages are placed in 5-er or 2 x 5-rods of the Meurer carton manufacturing and Packaging line fed and in 10 or 20 individual packaging packaged. Achievement: The inflow from the 2 single shrink plants to the Meurer carton packaging machine was 22,500 : 5 = 4,500 pieces of 5-piece individual packaging rods with 200 ml Tetrapack base Packaging Manufacturer Meurer Type: CM/BK 45 T80 Machine No. 861.5005.0199 Year of construction 2006 2 Meurer shrink systems with side-mounted 2 film roll unwinding lines per machine to change a film roll at to be able to carry out ongoing operation a.) 1 fully automatic film multi-shrink system Manufacturer Meurer Type: CM/BK 40 T80 Machine No. 861.004.0199 Year of construction 1999 Inlet height ...