automatic storage system used for sale

CTP HEIDELBERG SUPRASETTER A 52/ A 75 ATL -Year 2009 Thermal CTP -Laser Type: Laserhead (64 diodes, 160 mW, 2540 dpi ) Gen II -Approx 78.000 plates, 3.600 hours of work -Min. Plate size: 240x240 mm -Max. Plate size: 676x760 mm -Speed: up to 17/22 plates/hour -Manual plate loading -Internal plate punch Bacher system with 2 positions -Autoloader - ATL two plate storage cassettes ( max capacity of 50 plates in A1 size ) -Automatic paper separation from plate to plate -Heidelberg Prinect Metashooter included, computer and monitor -Always under Heidelberg Italy maintenance -Available in June, in very nice conditions

File cabinet system wood dark, top plate wood décor, front anthracite, sideboard approx. 120x120h cm, filing cabinet shelf combination approx. 250x220h cm

PUREGEN PGA 3672 SIMPLEX SYSTEM MAKE : PUREGEN GROUP OPERATION : AUTO BACKWASH SYSTEM DIMENSIONS : 36" Ø x 72" H FLOW RATE : ≈ 25 m3/hr MAX OPERATING PRESSURE : 150 PSI MATERIAL : STAINLESS STEEL SS304 WATER QUALITY : UP TO 10 MICRONS C/W JKKP DESIGN APPROVAL EACH FILTER C/W SUPER MICROSITE FILTRATION MEDIA WHICH CONSISTS OF 6 LAYERS OF ADVANCE DESIGNED MEDIA : ACTIVATED CARBON GREEN SAND SILICA SAND FINE SAND COARSE SAND QUARTZ STONE PLEASE CONTACT AARON: 0173698203 (MALAYSIA NUMBER) Located at Factory 04

A deposit of €200.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. 1x MARK RMA15 compressor (2017) Power 3kw 49745 working hours 1x MARK 7122 MK 98 compressor (1999) Power 7.5 kw 16040 working hours 1x MARK MDX 410P dryer (2008) R404A refrigerant Quantity 0!73 kg 1x compressed air tank TER-MEC CORDIVARI RC 07 (2007) Capacity 710 liters Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-43861-18

Manufacturer: DJM Model: COEX 4 Year : 2019 Condition: Used Serial Number: N500003 Stock Number: 3365 Diaphragm: 4 pieces Capacity: up to 100 strokes/min. Product diameter max. 60 mm Product temperatur: -2 °C to +45 °C Belt width: 440 mm Belt length: 1920 mm Belt speed: 3 - 15 m/min. Power: 3 x 400V, 50Hz, 20kW Dimensions: 2030 x 1625 x 2281 mm Weight: 2500 kg

Roll line WP Rollmeister - WP Rollmeister - 4 rows - Stainless steel - Rollmeister bread roll line - Details see pictures

A Wolf checkweigher with an integrated weighing unit Wipotech IW 40K is available. Infeed conveyor length: 600mm, weighing conveyor length: 700mm, outfeed conveyor length: 600mm, belt width: 400mm, direction of travel: right-left, max. product weight: 17kg, graduation: 1g, max. weighing weight: 15kg, throughput: approx. 200 products/min. Machine dimensions X/Y/Z: approx. 1300mm/500mm/1300mm, weight: approx. 200kg. Documentation vorhanden. An on-site inspection is possible.

CONTROLS   CNC controls SLM ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2600 mm   space requirements -front/back-: 1200 mm   total height: 2700 mm Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness: 20 μm - 90 μm Min. feature size: 150 μm Focus diamete ...

A Happel layer palletizer is available. Products: bags/cartons/bundles/containers/drums, package rotation: 90°/180°/270°, pallet format: 800mm/1200mm, max. pallet height: 1500mm, min. product dimensions X/Y/Z: 150mm/150mm/40mm, max. layer weight: 150kg, max. palletizing capacity: approx. 2500pieces/h. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2500mm, weight: approx. 2500kg. An on-site inspection is possible.

Manufacturer: Nutek Model: NTM530WSXL-1800-3-AW Year of Manufacture: 2010 Machine length: 1800 mm Belt segments: 3 Maximum PCB width: up to 460 mm (XL size) Maximum PCB length: up to 460 mm (XL size) Voltage: 230 VAC, single phase Power: 250 VA Weight: 190 kg CE Certified Find more here - / Contact us at -

Excellent condition - Fully operational - Loading / Transport possible! motor 15 kW, shaft width 600 mm, shaft depth 800 mm, rotor

1.1 Kw. 400 V. 50 Hz. 2.5 A. Very little use. With 4m arm. The mobile extraction system reliably filters the fumes and dusts produced during welding work with non-alloy steels and stainless steels. The unit is IFA approved for welding fume class W3. The degree of separation is greater than 99%. The clean air then returns to the work area. Made in Germany.

Card milling system MÜHLBAUER consisting of 3 elements 1 pc. mod. SCM 5000 built 1999, S/N 1827, 230 V AC, 1 pc. mod. SCM 525, built 2012, S/N M-10416, 400 V AC, total 2 units

PLC Card Withdrawal Handling KST System No. 418/2006-12, PLC control incomplete, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 037/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 009/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

PLC Card Withdrawal Handling KST System No. 035/2007, 400 V/50 Hz, PLC control, control cabinet, not exactly visible

Including: Sony SVO9500SD0 Video Cassette Recorder Sony UUP890MD Video Graphic Printer Mitsubishi CP700 Printer Fujitsu MDC3064SS External Drive Auction-ID: A1-45803-47

Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, S/N 427087, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, control Mosaic, touch panel SIEMENS Simatic, machine no. 163

Injection moulding machine/ card removal system FERROMATIK MILACRON EE155 built in 2007, machine no. 427100, clamping force 1,550 kN, international size 1,550H-300, injection pressure 1,943 bar, displacement 154 cm³, 400 V/50 Hz, motor 19.7 kW, heating 11.2 kW, weight 7.4 t, CNC control, touch panel SIEMENS Simatic, w. 036/2007, Masch.-Nr. 162

1) Grain trough with integrated discharge conveyor, conveying capacity: approx. 10t/h, trough length: approx. 4500mm. 2) Two silos with bucket elevator and distribution screw conveyor, height: approx. 8500mm, conveying capacity: approx. 10t/h, motor power: 1.5kW, gearbox speed: approx. 80rpm, silo volume: approx. 18m³. 3) Side channel blower with blow-through rotary valve Becker SV 8.130/1-01 DSF, speed: 3400rpm, air volume flow: 145m³/h, final compression pressure: 120mbar. 4) Radial fan with V-belt drive GRBO6630, flow rate: approx. 34m³/min, motor manufacturer: Siemens, motor power: 7.5kW, speed: 2930rpm. An on-site inspection is possible.

Work piece handling system manufactured in 2014. This LOHMEIER Schräglademagazin features adjustable material lengths of up to 12,000 mm and can handle materials ranging from 20 to 120 mm. It has a maximum load capacity of approximately 30 kg per meter of magazine length and includes pneumatic material alignment to the machine axis. If you are looking to get high-quality handling capabilities, consider the LOHMEIER Schräglademagazin we have for sale. Contact us for further details.

A complete layer palletizing system IW-Anlagentechnik with a pallet wrapper Tosa and pusher technology is available. Process chain: product infeed-layer formation-palletizing-transport-wrapping. 1) Palletizing system IW-Anlagentechnik PMS 120, year of construction: 1992, rotating unit: 90°. 2) Conveyor technology Transpak. 3) Rotary ring stretch wrapper Tosa 124E, year of construction: 2010. The system was used in the food industry for palletizing bottles and other liquid containers. Documentation available. An on-site inspection is possible.

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

A CNC glass cutting system Lisec in need of repair is available. Glass thickness range: 3mm-12mm, min. glass dimensions X/Y: 1600mm/1600mm, max. glass dimensions X/Y: 6000mm/3210mm, max. cutting speed: 120m/min, max. transport speed: 40m/min, cutting accuracy: +/-0.15mm, max. table load: 35kg/m², max. payload: 600kg, weight: approx. 6400kg. The X-axis of the machine has a fault. The system can cut diagonally and circularly and automatically grind the glass edges. Documentation available. An on-site inspection is possible.

Chocolate Enrobing Machine Dedy 220 Mesh belt width 220 mm Belt speed infinitely adjustable Working direction from left to right Stainless steel version Connection 220V Used machine as good as new & SAB tested with warranty + spare parts service

Ethos X Microwave Extraction -Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

This 6-axis Axial PHS-W-124 was manufactured in 1999. It features a bending force of 120 tons and a bending length of 4 meters, with a stroke of 200 mm. The machine is equipped with a Wila tooling system and a Step Automation Rock 17+ control with a 3D editor. If you are looking to get high-quality bending capabilities, consider the Axial PHS-W-124 pallet handling system we have for sale. Contact us for further details.

Fully driven roller conveyor Approx. 670m total length Year of construction 2017 Roll width 600mm Consisting of - Different element lengths : 3m elements / 2m elements / 1m elements - 16 scales - 15 curves of 90° each - approx. 20 rollers stroke - turner / corner turner - 3 x Apollo spiral conveyors Location : 42781 Haan Ready for collection from 01.08.2026

Test system left B-pillar top WZ54.01 left and right, each approx. 160 cm, 2 workstations

Double workstation pipe system/real wood panel approx. 160 cm, superstructure, lighting, internal workstation 503

A complete compressor system is available. 1) Screw compressor German Blast 22, year of manufacture: 2011, motor power: 22kW, operating pressure: 10bar, air flow rate: 190m³/h, machine dimensions X/Y/Z: approx. 1100mm/750mm/1450mm, weight: approx. 500kg, operating hours: 27305h, load hours: 10050h. 2) Compressor Rotorcomp, max. operating pressure: 15bar, max. operating temperature: 110°C. 3) Pressure vessel IPL, year of manufacture: 1997, volume: 1000l, max. operating pressure: 10.5bar, max. operating temperature: 50°C. 4) Air dryer German Blast BT-220. 5) Water separator. Documentation available. An on-site inspection is possible.

An industrial inline cleaning system Dürr with a retrofit from 2013 is available. Batch dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 100kg, throughput capacity: approx. 8batches/h, throughput weight: approx. 800kg/h, max. bath temperature: 70°C, max. air temperature: 130°C, stations: 5, machine dimensions X/Y/Z: approx. 6250mm/2450mm/3000mm, control system: Siemens Simatic S7. The temperature control of the system is defective. Including a Geltz ion exchanger circulation system. Documentation available. An on-site inspection is possible.

Two Belimed cleaning and disinfection devices RDG with integrated drying are available. Washing chamber dimensions X/Y/Z: 690mm/630mm/800mm, usable volume: 350l, coarse filter: 2mm, fine filter: 1.5mm, drying temperature: 110°C, air filter: HEPA H13, separation efficiency: 99.95%, A0 disinfection value: 3000. Machine dimensions X/Y/Z: approx. 1850mm/900mm/950mm, weight: approx. 400kg. Documentation available. An inspection on site is possible.

Serial No.: 2018k000171444 Rated voltage 230V 50 Hz Total cooling capacity 1490 W Temperature range 15 / 43°C Year of construction 05/10/2018 Weight 46 kg Auction-ID: A1-45977-325

3-row layout Output up to 3,000 pieces of SQUARE or ROUND rolls p/h Weight range for square rolls approx. 40 – 150 g/piece Weight range for round rolls approx. 40 – 85 g/pc (incl. knitting drum 55/80gr) completely stainless steel clad with TOUCH computer control incl. div cutting rollers incl. 3 stamps / + # + sun with humidification and turntable sprinkling station Application: e.g. rustic rolls, shaped rolls, round rolls Ciabatta, cobbler's boys, mini baguette, etc...

Connected load: 400 V Refrigerant: 95g / R134a Compressed air supply: 5-8 bar Printer: Star DP8340S Year of manufacture: 08/2002 Auction-ID: A1-45977-11

COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – built in 2011 For sale is a complete waste wood disposal plant of the Rudnick & Enners brand, built in 2011. The line consists of 20 positions and was used for the automatic removal, sorting and processing of rinds, chips and waste wood in a sawmill. The plant has a modular design, dismantled, in very good condition and immediately available. Technical Overview – Items 1 to 20 01 – TKF offset by reducer, W 600 mm 02 – Viborinne 1 trimming line, L 13.0 m, W 650 mm 03 – Viborinne 2-trimming line, L 15.0 m, W 650 mm 04 – Viborinne creel line, L 8.50 m, W 500 mm 05 – Viborinne 1-gang line, L 10.0 m, W 500 mm 06 – Viborinne 2-creel line, L 9.0 m, W 500 mm 07 – Viborinne creel roller table, L 7.50 m, W 500 mm 08 – Viborinne resawing line, L 11.0 m, W 650 mm 09 – Viborinne recut li ...

-Thermal CTP Year 2010 -64 diodes -Plate Count: 196,000 plates done -Exposure Time: 25,500 hours -Internal plate punch system -Blower Unit External Screen BU 800 -Min Plate Size: 304 x 370mm; Max Plate Size: 1160 x 940mm. -Maximum Imaging Area: 1160 x 924mm. Plate Thickness: 0.15 - 0.30mm. -Resolution: 2400 dpi -Productivity: Up to 23 plates/ph at 2400 dpi -Conveyor to Plate processor Agfa Elantrix 125 SX for thermal plates -Plate stacker Elantrix ST 125 EX and trolley -Complete with RIP Agfa Apogee Prepress and Workflow, computers and monitors -Available immediately

Tyristor amplifier Indramat from milling machine for controlling DC motors, incl. connection diagrams, transformers, transform 1 pc. 3 TRM 2 – G11 , for 3 axes, programming module TSS11/ 109, 144, 109 1 pc. 1 TRM 3 W23-W0 for 1 axle, TSS8 535-1 1 pcs. TRK 6 – 4U 380 , Tyristor Control Amplifier for Milling Motor, Programming Module TSS10-527 Price per piece: Euro 300,- 1 pc DC servo motor Indrumat, type: 2 G 1115 1 R-B3-3303 H2, speedometer TDC 2.6 H1 Price : Euro 400,-

-Terminal with Smart Shop System for individual shopping experience in self-service operation. -Scanner -Software -Screen -Built-in receipt printer Auction-ID: A7-46036-1

Bread roll system Year of construction 2010 consisting of: Head machine MINI REX Futura Proofer G 2000 with Stüpfler for Kaiser, with long-rolling station

Weima WL 6

Electric cutting table/ CNC cutting system R&R Sondermaschinen GmbH Type Lynx 2F Year 2007, S/N 0003, EOT head not available, Work table approx. 3,300 x 2,000 x 900 mm, Working pressure 6-8 bar, Year 2007, PC FUJITSU Esprimo E9900E-Star5, S/N YL6X011642, Monitor FUJITSU P19-1A, S/N YEBL008252

W.o. Chain conveyor with infeed system and chain conveyor Auction-ID: A1-43429-75

Including roller conveyor with cross transport system Auction-ID: A1-43429-79

W.o. Chain conveyor with infeed system and chain conveyor Auction-ID: A1-43429-72

Auction-ID: A1-43429-76

W.o. Kantelaar; chain conveyor; transport with conveyor belt; Chain conveyor with infeed system Auction-ID: A1-43429-78

: neu : ca. 8 Wochen ab Auftragse : Deutschland : 1970 € : 3000 mm : 820 - 940 mm : 300 kg/m : 350 mm : 63 x 3 mm : 15 mm : 250 mm supply- and removal roller table with lateral guidance FURTHER LENGTHS: 1meter € 1.133,- 2 meter € 1.395,- 4 meter € 2.363,- 5meter € 2.948,- 6 meter € 3.601,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.