123 offers

Category: 1200: machines and plants for process engineering
New in: 2011
Price: request quote
Location: Land-de DE 59302 Oelde, Ludwig-Erhard-Allee 11
Seller: UZS DekanterService GmbH

Full automatic used polymer preparation system for powder polymer. Description: -Unit is used, best conditions -Manufacturer of plant: PROMINENT -Identcode: ULFA2000SA00P203L0043DE -Control cabinet with control system S7-1200 -Siemens touch panel -Electrical connection: 400V 50/60 Hz, power: 0, 75kW -Volume of the tanks: 2000 litres -Three Chamber unit made from PP -processing of only powder polymers (solution possible from 0.05 - 0.5%) -Operator-guided of input of solution -Connection for solution side of the unit -Calibration of powder dosing system -Water flow meter - FC for powder dosing system -Level input manuel possible -Hopper for powder of 100 liters -three el ...

Category: 203: planing machines
New in: 2012
Price: request quote
Location: ab Standort
Seller: Gebr. Engelfried oHG

Number of spindles: 8 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2000 mm Feed motor: 7 kW Feed speed: 5-30 m/min. Dimensions (L/W/H): 5700x2100x1740 mm weight of the machine ca.: 5000 kg Control: Weinig PowerCom Weinig Powermat 1000 CNC, year 2012 ------------------------------- Executive Summary: ------------------------------- 8 spindles HSK / powerlock large PowerCom controller Grooved Axial and axial axes CNC controlled Detailed description: ------------------------------- Technical specifications: ------------------------------- Working width max. 260 mm Working height max. 160 mm 1. tool holder ------------------------------- First lower tool holder E ...

Category: 401: filling machines
New in: 1998
Price: 149.000 €
Location: Land-nl NL 3411 Lopik, 1e Industrieweg 13
Seller: Useddairyequipment

4 lines form fill and seal machine, aseptic design, dosers and filling tunnel steam able, with bottom foil heating in 8 steps, forming, pre-doser for fruit and main doser, top seal decontamination by Peroxide or UV light, sealing, outfeed conveyor, labelling (2 sides total covered, make: Krones, type: Starmatic, cold glue), conveyors and automatic carton erector for open trays (make Schaffer & Flottmann, type: 374, nr 98008), automatic packaging and all auxiliary equipment such as sterile air treatment station, 2 blowers, peroxide injection system and air filters. Cup size rectangular / oval shaped cup, 90 x 70 mm. Capacity:up to 20.100 cups/h, 8x (4x3) cups per stroke, 28 strokes/min. Packa ...

Category: 109: other metal working machines
New in: 2001
Price: request quote
Location: Land-de DE Backnang
Seller: I-H&S GmbH

Technical Data item number: KM-1103 Manufacturer: TRUMPF Type: TRUMATIC 6000L -1600 Year: 2001 Working area: 3085 x 1650 mm Laser rated output: 3200 Watt Control: Siemens Sinumerik 840D Working hour: 54.341h / 12.015h Punching force: 22 to Max. Tool diameter: 76,2 mm Max. Sheet thick.: 8 mm Max. Material weight: 230 kg Positioning accuracy: +/- 0,10 mm Length: 9100 mm Width: 7900 mm Height: 2400 mm Weight: 22500 kg \n \n \n Standard configuration \n \n \n \n Stable C-frame \n Coordinate guide with integrated linear magazine, 17 tool stations, \n 3 clamps \n Drives: Maintenance-free, three-phase serv ...

Category: 1407: roller conveyors
New in: 2008
Price: request quote
Location: Land-de DE 47800 Krefeld , Keutmannstr. 261
Seller: Lager-und Fördertechnik Namoni

Roller conveyor systems conveyor Knapp second-hand machine Properties Used Roller conveyor Condition: good with wear Ideal for fast material handling Expertly disassembled and packed Feet must be ordered separately Color: Grey Manufacturer: Knapp Year of construction: 2008 80 meters available including 8 drive units/motors and including Guide (45 mm high x 25 mm wide) Price per meter Technical data: Total width approx.: 485 mm Roll width: 410 mm Roll diameter: 50 mm Centre distance: 120 mm Rolling steel Rollers manufacturer: Interoll Information on the framework Frame height: 85mm Frame width: 30mm Material: Steel Tailor-made solutions for your intralogis ...

Category: 109: other metal working machines
New in: 2015
Price: request quote
Location: Land-de DE Backnang
Seller: I-H&S GmbH

Technical Data item number: LM-1691 Manufacturer: TRUMPF Type: TruLaser 5030 fiber (L68) Year: 2015 Working area: 3000 x 1500 x 115 mm Laser rated output: 5000 Watt Control: Siemens Sinumerik 840 D Working hour: 23.119h / 9.912h Max. Sheet thick./St: 25 mm Max. Sheet thick./VA: 20 mm Max. Sheet thick./AI: 20 mm Max. Speed: 265 m/min Positioning accuracy: 0,10 mm Length: 8000 mm Width: 4800 mm Height: 2400 mm Weight: 12000 kg (Grundmaschine) \n \n \n Standard configuration \n \n Machine \n\n \n Closed machine frame \n Integrated cabinet \n Automatic pallet changer lengthwise installation \n Torque drive in combin ...

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-fr FR 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Engine details Stock number 1105-02517 machine type machining center - vertical make FEHLMANN type Picomax 60 CNC year 2001 control type CNC storage HAGUENAU country of origin Switzerland delivery in the short term, by arrangement of based on cargo from stock, free shipped price on request Technical details x route 505 mm y way 355 mm z path 610 mm Panel TNC 430 HEIDENHAIN table size 380 X 920 mm power - spindle 5 kW spindle speeds - infinitely 18000 RPM coolant system 150 litre drilling capacity in St 50 - in the full 20 mm thread cutting steel M 16 /. ALU M 20 table burden 0.3 t tool changer 24 - fold height adjustment: manual/automatic head 450 mm overall power con ...

Category: 203: planing machines
New in: used
Price: request quote
Location: ab Werk
Seller: Gebr. Engelfried oHG

working length: 3100 mm Working width: ca. 3400 mm Working height: 750 - 1000 mm Haberkorn return means for Umfälzautomat For frame from 300 mm to 3000 mm for automatic Return consisting of: First cross roller conveyor approx 3100 mm long ------------------------------------------------- built-in conveyor belts for depositing the wing on the cross roller conveyor with about 10 mm stroke Driving speed of about 5-30 m / min. Roller diameter 80 mm Rollers with PVC coating Gear motor with 0.37 KW 2 Synchronized lifting device for cross roller conveyor -------------------------------------------------- ------------------------ built-in rollers with stepless drive about 5-30 m / min. max. 100 m ...

Category: 1401: shelves
New in: 1997
Price: 215.000 €
Location: Land-de DE NRW
Seller: Alexander von Westernhagen

2 Gass-automatic satellite pallet storage (compact bearing, channel storage) 5 or 6 deep pallet storage, Nedcon, approx. 4614 pitches, 1to / pallet incl. pallet conveyor system - second-hand -: Price from site: â?¬215.000.-(net), plus montages etc.! The facility has received a "refresher" time, and is now able to move pallets in the system. That is, it is also possible to store different products a channel. Satellite camp (also known as satellite warehouse) is a subgroup of the compact bearing and channel storage. Pallets in a row at tracks in the channel. In the rail, a correspondingly shallow processing unit, the satellite, pallets can pass and carry lift, to  ...

Category: 107: sheet metal working
New in: 1992
Price: request quote
Location: Niedersachsen
Seller: Plum & Partner Werkzeugmaschinen GmbH

Loading Capacity ? Input: 5 t Loading Capacity ? Outlet: 3 t material width: 2000 mm material length: 3000 mm material thickness: 6 mm : 2400 x 2000 x 700 mm weight of the machine ca.: 12,7 t Control: Cybelec DNC 30 dimensions of the machine ca.: 23 x 4 m main drive: 17 kW Electric 380 Volt: Pneumatic system: Hydraulic-device: Automatic sheet cutting center consisting of: 2 loading tables with VakuLift 300 kg brand Fezer / Feeding device with storage table and feeder 3 m / hydr. plate shear 2 m cutting width with cutting angle + gap adjustment / Removal device (conveyor belt) with separating device 2 stacking points for 2 output sizes: one brand Theis LxWxH = max. 2400 x 2000 x 700 mm wit ...

Category: 107: sheet metal working
New in: 1999
Price: 42.900 €
Location: Land-de DE D-74889 Sinsheim
Seller: KISTNER GmbH & Co.KG

TRUMP | TC 2000 R CNC punching equipment Control: BOSCH type 3 Year of construction: 1999 Machine number: 700111 Working range: 1,270 x 2,020 mm Maximum sheet thickness: 6.4 mm Maximum punching force: 180 kN Maximum workpiece weight: 75 kg Maximum clearance height: 38 mm Programmable down holder force: 4,000 17,000 kN Facilities: -Sturdy C frame -Coordinate management with integrated linear magazine, 9 tool places, 2 clamps, automatic tool changer -Drives: maintenance-free, Digital AC servo motors -Punching head: hydraulic system with closed loop, Mono Werkzeugaufnhame, 360 ° rotation for all tools -Function: - threads - sign / fast beading -Tool spray lubrication -Tab ...

Category: 301: injection moulding machines
New in: 2017
Price: request quote
Location: NORTEC Technikum
Seller: NORTEC MASCHINENTECHNIK GMBH

screw size: 90 mm injection shot weight in polystyrene: 2.902 g/PS closing pressure: 6500 kN No. of components: INJECTION UNIT : for processing thermoplastics: screw diameter: 90 mm max. swept volume: 3.149 cm³ spec. injection pressure increased: 1.885 bar srew and barrel L/D: 20 srew wear resistant: S 6 barrel in bi-metallic-execution: M 3 controlled traverse cooling: heating capacity: 33,6 kW without material hopper: No. of components: CLAMPING UNIT : hydromechanical 2-platen design: clamping force: 6.500 kN opening stroke: 1.350 mm mould height min.: 450 mm mould height max.: 1.100 mm daylight between platens - max.: 1.800 mm distance between tie-bars h x v: 1.010 x 1.010 mm To ...

Category: 1200: machines and plants for process engineering
New in: 2005
Price: request quote
Location: Land-kr KR 407-8 Seoul, Seoul South Korea
Seller: BMJ KOREA

Automotive Part Production line (Radiator/ Condenser / Heater / Evaporator ) 1.Fin production machine Make:Dongsung(Korean) Year;2005 Equipment Size:4,700(L)x1,100(W)x1,590(H)mm Cap':Condenser 8mm(h)x16mm(L) Evaporator 9mm(h)x72/88mm(L) Heater 6.8(h)mmx420mm(L) Main :380V 60Hz Main Motor:3.7kW 2.Dryer Make:Hankook(Korean) Year;2005 Size:2,600x2,000x2,000(H)mm Cap':200? 3. BLAST CLEANING Make:Hankook(Korean) Year;2005 Size:1,300x840x2,000(H)mm 4.Ultra sonic cleaner Make:Greensonic(Korean) 4- bath automatic cleaner 1 bath:dipping-Ultra sonic equipment x 2units and heater 2bath:cleaning-Ult ...

Category: 301: injection moulding machines
New in: 2017
Price: request quote
Location: NORTEC Technikum
Seller: NORTEC MASCHINENTECHNIK GMBH

screw size: 70 mm injection shot weight in polystyrene: 1.482 g/PS closing pressure: 4.500 kN No. of components: INJECTION UNIT : for processing thermoplastics: screw diameter: 70 mm max. swept volume: 1.482 cm³ spec. injection pressure increased: 1.887 bar srew and barrel L/D: 20 srew wear resistant: S 6 barrel in bi-metallic-execution: M 3 controlled traverse cooling: heating capacity: 20,7 kW without material hopper: No. of components: CLAMPING UNIT : hydromechanical 2-platen design: clamping force: 4.500 kN opening stroke: 1.100 mm mould height min.: 350 mm mould height max.: 800 mm daylight between platens - max.: 1.450 mm distance between tie-bars h x v: 860 x 810 mm Total d ...

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE 92714 Pleystein, Berglerscheife 8
Seller: Mirrotech Glas & Spiegel GmbH

The glass drill GBMV 2-900-10 vertical is a robust machine with large work area and manual confirmation of both spindles. The boring heads are firmly arranged in good working height, while the glass by means of a movable lift frame is positioned automatically after digital input of set value in vertical direction. The glass on smooth rolling by hand using scaled attacks is positioned in horizontal direction. Electrically adjustable lift frame, digital preselection of the vertical hole values, two drill heads with manually confirmed feed, presser with gas pressure spring, coolant tray, drilling depth stop, thermal motor protection, undervoltage release, Junction box for cooling system, conn ...

Category: 301: injection moulding machines
New in: 2017
Price: request quote
Location: NORTEC Technikum
Seller: NORTEC MASCHINENTECHNIK GMBH

screw size: 105 mm injection shot weight in polystyrene: 5.022 g/PS closing pressure: 6500 kN No. of components: INJECTION UNIT : for processing thermoplastics: screw diameter: 90 mm max. swept volume: 3.149 cm³ spec. injection pressure increased: 1.885 bar srew and barrel L/D: 20 srew wear resistant: S 6 barrel in bi-metallic-execution: M 3 controlled traverse cooling: heating capacity: 33,6 kW without material hopper: No. of components: CLAMPING UNIT : hydromechanical 2-platen design: clamping force: 6.500 kN opening stroke: 1.350 mm mould height min.: 450 mm mould height max.: 1.100 mm daylight between platens - max.: 1.800 mm Total daylight max.: 1.460 x 1.460 mm distance betw ...

Category: 1403: other storage equipment
New in: 2012
Price: 585.000 €
Location: Land-sk SK Bratislava
Seller: Alexander von Westernhagen

AKL used with 94,000 container creation, max. 30 kg / container, 7 streets, 600 containers / h - -: Price from site: only â?¬585.000.-instead of â?¬1.285.000.-(net) plus montages etc.! Manufacturer: Aberle / TGW Year 2012 Maximum capacity: 94,000 vessels Length: 70 m Width approx. 16m Height: approx. 8m conveyor speed 0.47 0.65 m/s Lifting speed 3 m/s Hub acceleration 3 m/s² Traversing carriage speed 5 m/s Traversing carriage acceleration 2.5 m/s² Storage for 3 different sizes of floor plan and 2 different heights of KLT-container Maximum weight for KLT 30kg 4 WE-treadmills, 14 WA treadmills and 1 n.i.O railway Use the dynamic  ...

Category: 301: injection moulding machines
New in: 2017
Price: request quote
Location: NORTEC Technikum
Seller: NORTEC MASCHINENTECHNIK GMBH

screw size: 120 mm injection shot weight in polystyrene: 5.496 g/PS closing pressure: 16.000 kN No. of components: INJECTION UNIT : for processing thermoplastics: screw diameter: 120 mm max. swept volume: 6.107 cm³ spec. injection pressure increased: 2.007 bar srew and barrel L/D: 20 srew wear resistant: S 6 barrel in bi-metallic-execution: M 3 controlled traverse cooling: heating capacity: 55 kW without material hopper: No. of components: CLAMPING UNIT : hydromechanical 2-platen design: clamping force: 16.000 kN opening stroke: 2.700 mm mould height min.: 700 mm mould height max.: 1.600 mm daylight between platens - max.: 3.400 mm distance between tie-bars h x v: 2.450 x 2.150 mm ...

Category: 1101: power generators
New in: 2009
Price: 17.000 €
Location: Land-de DE 64404 Bickenbach, Breithauptstr. 1
Seller: H & N Energien GmbH

Container - power generator of 125 kVA manufacturer: Karunaratne Type: 125 DID/4 p/w/E/C Nominal power (PRP): 125 kVA Power factor: cos phi 0.8 Voltage: 400 / 231 V Frequency: 50 Hz Rated speed: 1500 min Execution class: G2 Control: K-EA-NULS1/SY/NP automatic and parallel operation with overlapping synchronization Day tank: Krampitz 100 litres Storage tank: Fiberglass 1000 l Fuel consumption: 29.3 l / h Year of build: 2009 location: Bickenbach / Germany #Stromaggregat #contaner #genset #notstrom #Stromerzeuger #power

Category: 102: lathes
New in: 1998
Price: request quote
Location: Deutschland
Seller: Knops Werkzeugmaschinen

turning diameter: 340 mm turning length: 800 mm control: Heidenhain Pilot 3190 Turn Plus total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The machine was 2018 geometrically and mechanically reconditioned and is available immediately. A set of standard turning tool holders is included. TECHNICAL SPECIFICATIONS Working range: Machine nominal length (NL) 800 Distance of turning spindle flange-tailstock center mm 987 Swing diameter over bed slide / bed mm 460/670 Turning diameter above bed carriage mm 340 Work spindle (Variant I, direct drive): Diameter in front bearing mm 120 Bore through mm 83 Spindle head DIN 55026 Form A size 8 Total speed range 1 /  ...

Category: 102: lathes
New in: 1986
Price: request quote
Location: Land-de DE 57581 Katzwinkel, Sandstr. 22
Seller: Maschinendrehpunkt

CNC lathe hamlet Praktikus CNC numerically controlled lathe Control: CNC hamlet / / Siemens 2-axis storage control (type 3 T SIN / 4B) Top turning length: 250 mm Spindle passage: 41 mm Swing over cross slide: 80 mm Swing over bed: 220 mm x: 265 mm z: 225 mm Rapid traverse x/z: 6 m / min. Spindle carrier short taper 5 DIN 55022-5 Morsekegelaufnahme MK 1/2 Tailstock Quill taper MK 3 Max spindle adjustment 85 mm Measuring system/porcelain button Coolant pump 100 l / min. Main drive speed: 6000 RPM. Total power: 16 kW Space Lxwxh: 3300/2100/2150 mm Weight: approx. 1,8 tons Special Accessories: Chip conveyor Force clamping device hydraulically Universal interface Speci ...

Category: 102: lathes
New in: 1991
Price: request quote
Location: Metzingen
Seller: Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

turning diameter: 250 mm turning length: 400 mm control: C 200 / 8 total power requirement: 60 kW weight of the machine ca.: 8,5 t Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. ...

Category: 1300: other machines and plants
New in: 2012
Price: request quote
Location: Land-de DE Baden Württemberg
Seller: METEC GmbH

Optical measuring device Manufacturer: Keyence Type: IM-6020 (measuring head) Year of construction: 2012 Software updated: 2017 Image sensor: CMOS, 1 ", 6.6 megapixel Display: 10.4 "-LCD-monitor (XGA: 1024 x 768)" External monitor can be connected (cloned out) Object system: double tele-centric Image-based measurement: Measuring range: Ø 100 x L200 mm Image field: Ø 100mm 25 x L125 mm image field: Ø 100mm Display resolution: 0.1 µm Repeat accuracy: Ø 100 x L200 mm image field: ±1µm 25 x L125 mm image field: ±0.5µm Measurement accuracy (± 2): Ø 100 x L200 mm image field: ±5µm1 25 x L125 mm image field: ±2µm2 External remote input: No-voltage inpu ...

Category: 1300: other machines and plants
New in: 2007
Price: used machinery auction RESALE 1.800 €
Location: Land-de DE Germany, 40472 Düsseldorf
Seller: Surplex GmbH

Weight approx.: 660 kg Dimensions (l x w x h) approx.: 1770 x 2070 x 1115 mm Description: - Serial number: 41040 - Dimension of the plate: 76 x 122 cm - Current: 380 V +N - Power consumption: 7,2 kW - Power consumption /h: 3,5 kW - Temperature: 50°-255°C - Time regulable: 0-999,9 sec. - Pressure(6 bar): 300-400 gr/cm² Features: - Digital adjustment of time and temperature with touch screen - Setting and storage of 4 presets - Automatic fault detection system - Daily and historical piece counter

Category: 102: lathes
New in: 2006
Price: request quote
Location: Land-de DE 47839 Krefeld, Botzweg 40b
Seller: HBN Werkzeugmaschinen GmbH

Working Area – flow direction is from left to right chuck diameter mm 250 workpiece diameter mm 140 center height - depending on mounted parts mm 630 Workpiece Length - depending on additional parts mm 630 weight kgs 20 6-position End Machining Turret Head for cut to length and centering – A1 – track 1 driven tools positions 6 1 position below and above with internal cooling workpiece gripper position 1 tool taper HSK C63 tool diameter mm 120 tool length mm 120 spindle rotation speed rpm 3.000 power requirement at 40% / 100% duty cycle kw 47 / 31 torque at 40% / 100% duty cycle Nm 150 / 100 travel – X-axis mm 143 / -192 travel – Z-axis mm 715 rapid motion –  ...

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: ab Standort
Seller: FLECKENSTEIN Werkzeugmaschinen GmbH

x-travel:10.000 mm y-travel:4.600 mm z-travel:1.200 mm portal width:4.000 mm portal high:1.500 mm clamping table:11.000 x 3.670 mm min./max. distance spindle nose to table surface:300/1.500 mm Table load max.:2.000 kg/m2 T-slots:15 pc. T-slot - distance:250 mm max. feed rate X,Y,Z - axis:1-24.000 mm/min max. feed power, Z-axis:24.000 N rapid travel x/y/z:36/30/24 mm/min AC-main drive - water cooled: power, S6-40% ED:42 kW transmission ratio:2 turning speed range - stepless:30-6.000 1/min Max. Torque, ED 40%:1.430 Nm tool taper :SK 50 DIN 69871 Form A spindle diameter in front bearing:100 mm Max. boring capacity:dm. 120 mm max. dm. rigid tapping:M50 Max. Milling-capacity:800 cm³/min spindle  ...

Category: 1403: other storage equipment
New in: 2004
Price: request quote
Location: Land-fi FI 00980 Helsinki, Hämeentie 15 S, 3rd Floor
Seller: JADE Trading OY

Fully Automatic Pallet Warehouse This is a multilevel fully automated warehouse for various goods which can be placed on standard storage pallets. Total hold in capacity of this Actiw System is 4200 pallets and it has loading and unloading capacity of 240 pallets / hour. Actiw Systems is the total warehouse management system which has hardware and software for moving storage pallets to and from storage, storing, sorting, staging, picking and loading (and unloading) palletized products fully automatically. Actiw System can be integrated as a part company's logistic system and it has Siemens Simatic S7 PLCs with Ethernet connections. The warehouse structure is made of bolted, coated / ga ...

Category: 101: boring mills and machining centers
New in: 2006
Price: request quote
Location: ab Standort
Seller: FLECKENSTEIN Werkzeugmaschinen GmbH

x-travel:3.000 mm y-travel:800 mm z-travel:600 mm Working area : Size Clamping table 1:850 x 1.500 mm Size Clamping table 2:850 x 1.200 mm Table load max.:1.000 kg Tables height-adjustable 3 x 65 mm: feeds:: X-, Y- and Z-axis, stepless:5 - 32.000 mm/min Max. feed power X- and Y-axis:10.000 N Max. feed power Z-axis:16.000 N rapid in X / Y / Z:32 m/min Working spindle: AC-main drive ? water cooled: power, S6 -60% ED:26 kW transmission ratio:2 i = 1:4 Speed, stepless:30 - 6.000 1/min Max. torque 40% ED:650 Nm tool taper:SK 50 ? DIN 69871 Form A spindle diameter in front bearing:90 mm 6-fach gelagert Max. boring capacity:Ø 100 mm in Stahl C45 Max. Ø rigid tapping:M 40 in Stahl C45 Max. millin ...

Category: 1300: other machines and plants
New in: 2015
Price: 20.000 €
Location: Land-de DE 58455 Witten, Voedestr. 40
Seller: Frau Nicole Sänger

Complete system from a hammer mill consisting of the following components Manufacturer: Cyrus Recklinghausen Year of construction / commissioning 11 / 2015 Vibrating / storage tray 1000/1500 x 2300 Conveyed goods: Blanks Round Ã? 24-42 mm Installation: Horinzontal on rubber hollow springs Filling weight: Maximum 4000 kg Pan width: 1000 / 1500 mm (conical trough) Gutter length: 2300 mm Power plant: 2 vibration motors 400 V, 50 Hz, IP65 at ca 1450 RPM Oscillation amplitude can be infinitely at a standstill The complete system is damage and been professionally dismantled ______________________________________________________________________ ________ ...

Category: 401: filling machines
New in: new
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC FILLINGsystem - Sample system for large container liquid filling 1-10 liter Sample system for liquid filling of large containers. Fully automatic line. - Specifications: capacity: 1-10 liter | max. speed of the machine in neutral: 720 containers/hour | accuracy: +/-0.5%. - System includes: Optional storage container, 5m conveyor, 4 sensor weighing systems, 4 electronic filling heads, pipelines, control system and anti-drip mechanism (4 pcs.). Final Specifications will depend on customers needs. - Please give us your details to prepare a full quotation. Our machines are available as sample, exhibition or demonstration machines and available directly from stock/overstock. Sometimes also  ...

Category: 1300: other machines and plants
New in: 2015
Price: 20.000 €
Location: Land-de DE 58455 Witten, Voedestr. 40
Seller: Frau Nicole Sänger

Complete system from a hammer mill consisting of the following components Manufacturer Cyrus Recklinghausen Year of construction / commissioning 11 / 2015 Vibrating / storage tray 1000 / 1500 x 2300 Conveyed blanks Round Ã? 24-70 mm Square 45-70 mm Installation: Horinzontal on rubber hollow springs Filling weight: Maximum 4000 kg Pan width: 1000/1500 mm (conical trough) Gutter length: 2300 mm Power plant: 2 vibration motors 400 V, 50 Hz, IP65 at ca 1450 RPM Oscillation amplitude can be adjusted at standstill levels Los The complete system is damage and been professionally dismantled Allocation automatic CZIS 1850 acoustic version Conveyed b ...

Category: 401: filling machines
New in: new
Price: request quote
Location: Land-de DE Hamburg
Seller: BluePack Machines GmbH

AMTEC CUP-FILLINGsystem Aut. Rotary cup/container filling/film sealing and capping RT-L20 New model Auto Rotary Plastic Container Feeding, Filling, Sealing and Capping Machine for larger cup/container sizes. - Functions: The cup/container stacks are being put manually into the vertical storage device. Each cup/container will be picked automatically and transfered to the filling station (dosing unit is optional). Film is supplied to seal the cup/container before a capping unit closes it with a cap. Finally outfeed of the finished cup/container. - Stainless steel version (SS304), nitrogen filling device included, heat sealing system (0-300°C), film cutting depending on box shape. Servo motor  ...

Category: 1402: other machines for mechanical handling
New in: used
Price: 1 €
Location: 04356 Leipzig, Am alten Flughafen 1
Seller: Regalux GmbH

We offer a sorting plant Optimus for sale. It's a Distrisort. The system has been used, was dismantled correctly and securely packaged for transport. Now waiting for a new owner. The sorter is intended for book sorting. Our company offer you a full range of services. We design, deliver and assemble the equipment according to predetermined customer needs. technical data: Sort type: Distrisort Sorter layout: carousel assorted product: Packages capacity: 5,400 trays per hour machine length: 20 m tray size: 600 x 600 mm objectives: 21 Slide length: 1,000 mm sliding distance: 900 mm in-feed: automatic, top loading Sort type: postcode / route Features: Automatic camera bar co ...

Category: 112: gear cutting and hobbing machines
New in: 1999
Price: request quote
Location: Staufenberg 1
Seller: HD Werkzeugmaschinenhandel GmbH

max. wheel diameter:215 mm gear width:40.65 mm max. module: Largest Speed Ratio:1:10 x-axis:(horizontal) -152 to 102 mm y-axis:(vertical) -102 to 178 mm z-axis:Sliding Base Travel 2\" to 12\" (51 to 304mm) mm b-axis:3 - 90 ° max. distance machine center to spindle slide:115 mm max. nos. of teeth:5 - 200 ( inclusive ) St. workpiece external diameter max.:215 mm tooth profile - width x height:16 x 40,65 mm grinding wheel diameter:51 -190 mm grinding wheel turining speeds:1000 - 6000 1/min workpiece turning speeds:0 - 30 1/min workpiece spindle bore:konisch 3-29/32 \" speed of axis:125 mm/sec. total power requirement:20 kW - 380 V - 50Hz kw weight of the machine ca.:10000 kos. dimensions of th ...

Category: 104: grinding machines
New in: used
Price: request quote
Location: Land-de Germany, 63303 Dreieich
Seller: ReloConsult GmbH

Automatic brushing machine (4.800 mm x 400 mm) for the surface treatment of metal surfaces. Polishing and brushing. Machine is operated via Control Panel. With controls With housing With exhaust suction system approx. 400mm working width 4,800 mm working length Width 5.35 meters Deep 2.00 meters Height approx. 2.00 meters Weight approx. 3to Dismantled in ongoing operation due to relocation of company. Machine is transsportready in storage. Free loading in the Rhine-Main area. Please submit an offer! For questions please email, we will contact you asap! --

Category: 103: milling machines
New in: 1989
Price: request quote
Location: Werk
Seller: Gerd Seidler Werkzeugmaschinen

x-travel: 5600 mm y-travel: 3617 mm z-travel: 828 mm Control: SIEMENS 840 C Rapide traverse: 12000 mm/min max. torque on the spindle: 1750 Nm tool taper: SK 50 turning speeds: max. 2500 U/min gear box: 3 x distance between columns: 2650 mm Screw conveyor self-made 4 - axis Portal processing center with 5-sided machining, pallet changer and tool arena with KUKA robot SK50 with storage space for 270 tools Automatic head change Max./Min. Distance at angle head Spindle center> Table - with pallet: max. 979 mm / min. 151 mm, without pallet: max. 1.231 mm / min. 403 mm Max./Min. Distance vertical head spindle nose> table - with pallet: max. 1080 mm / min. 252 mm, without pallet: max. 1.330 mm / mi ...

Category: 1101: power generators
New in: 2009
Price: request quote
Location: Land-de DE
Seller: Andreas Fabig Maschinenhandel

Power: 400 kVA / 320 kW Motor Type: Iveco Cursor 13TE3 Hours of operation: Only 145 Generator: Mecc Alte ECO 40-1S/4 Control cabinet: Automatic with KEA 101 UESY Tank: 500 l day tank and 1000 l storage tank Container Very good condition

Category: 112: gear cutting and hobbing machines
New in: 2002
Price: request quote
Location: Staufenberg 1
Seller: HD Werkzeugmaschinenhandel GmbH

max. wheel diameter:215 mm gear width:40.65 mm max. module: Largest Speed Ratio:1:10 x-axis:(horizontal) -152 to 102 mm y-axis:(vertical) -102 to 178 mm z-axis:Sliding Base Travel 2\" to 12\" (51 to 304mm) mm b-axis:3 - 90 ° max. distance machine center to spindle slide:115 mm max. nos. of teeth:5 - 200 ( inclusive ) St. workpiece external diameter max.:215 mm tooth profile - width x height:16 x 40,65 mm grinding wheel diameter:51 -190 mm grinding wheel turining speeds:1000 - 6000 1/min workpiece turning speeds:0 - 30 1/min workpiece spindle bore:konisch 3-29/32 \" speed of axis:125 mm/sec. total power requirement:20 kW - 380 V - 50Hz kw weight of the machine ca.:10000 kos. dimensions of th ...

Category: 401: filling machines
New in: 2008
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Flavoured Still Water Production Equipment APV 15 000 l/h Complete flavoured still water production plant made by French APV and Polish SPX in year 2008. The processing plant has every item from sugar melting, flavouring, pasteurizing, storaging, chilled water and steam production. All design is made by APV, control system is build with Siemens Simatic S7 series PLC. Techncial charasteristics: Manufacturer: APV and SPX Installation year: 2008 Capacity: 15 000 liters / hour Main equipment • Liquiverter 500 liters stainless steel sugar mixing tank with 18.5 kW agitator • Compond syrup mixing tanks 2 x 6000 liters, both with 4 kW agi ...

Category: 206: presses
New in: 2008
Price: request quote
Location: Land-it IT
Seller: Mercator S.R.L.

TECHNICAL DATA:Automatic feeding for pressesChain system and carpet system.Central storage systemElectric Power: 11 kW

Category: 1403: other storage equipment
New in: 2016
Price: 525.000 €
Location: Hamburg
Seller: Alexander von Westernhagen

2 KW fiber laser cutting system Amada, incl. autom. Sheet metal storage tower - used but like new -: Price from site: â?¬525.000.-(net), plus dismantling etc. Manufacturer: Amada Model: Ensis-3015 AJ + ASF-EU Year of constr.: 2016 Condition: as good as new (used) just barely 700 hours of cutting time AMNC control 2KW fiber laser Optics flying principle 3 axis drive Beam modulation unit Oil spray device incl. sensor cutting head including NC cutting gas control incl. NC focus control including high pressure cutting function Cleancut incl. aluminium cutting function Alucut including procedures way fuse in accordance with CE incl. automatic nozzle changer incl ...

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-be BE
Seller: APT International

+ Full Automatic Plate-storage (45 cassettes of 4000x2000) (optional) + Full automatic Loadingsystem Revision 2008

Category: 1300: other machines and plants
New in: 2011
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Textile finish line and dyeing line 1. Rolling machine Make:ROLL TECH(Korea) Year:2011 Rubber Roller : ?165×2,300?×3ea Spnge Roller : ?165×2,300?×2ea 2 Large centrifugal dehydrator Make:Manduk(Korea) Year:2011 Basket Size : 1,520×1200(H)? Basket Cap' : 500? Motor : 18.5? rpm : 0 - 700r.p.m 3 Turning machine Make:Total(Korea) Year:2011 Type : Vertical Turbo Blower -Speed : 3,500rpm -Power : 7.5? 4 CCK-? System Make:Daerim(Korea) Year:2011 (Computer Color Kitchen)System (1)Hardware Model:Color Focus-?(DLF-124) 124DYES TYPE (1000cc×24ea,500cc×100ea) (2)Software (3)Stock Solution  ...

Category: 604: textile finishing machines
New in: 2011
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Textile finish line and dyeing line 1. Rolling machine Make:ROLL TECH(Korea) Year:2011 Rubber Roller : ?165×2,300?×3ea Spnge Roller : ?165×2,300?×2ea 2 Large centrifugal dehydrator Make:Manduk(Korea) Year:2011 Basket Size : 1,520×1200(H)? Basket Cap' : 500? Motor : 18.5? rpm : 0 - 700r.p.m 3 Turning machine Make:Total(Korea) Year:2011 Type : Vertical Turbo Blower -Speed : 3,500rpm -Power : 7.5? 4 CCK-? System Make:Daerim(Korea) Year:2011 (Computer Color Kitchen)System (1)Hardware Model:Color Focus-?(DLF-124) 124DYES TYPE (1000cc×24ea,500cc×100ea) (2)Software (3)Stock Solution  ...

Category: 1200: machines and plants for process engineering
New in: 2017
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Pub Brewery Caspary 10 HL, Copper Cladded, 2017 Never Installed This pub brewery equipment was made by German Caspary GmbH in year 2017 and it has never been installed and thus new like condition. Factory made brew house block consist of Mash & Wort Kettle, Mash & Lauter Tun and Whirlpool. Whirlpool is located just under Mash & Lautertun. This block has been tested at Caspay factory with all accessories and instruments before shipping. The wort kettle, lauter tun and related pipes and ducts are cladded with highly polished copper which gives this pub brewery a very special high quality atmosphere. Also two-wing trapdoors of both vessels are hand made from copper and polished. This is ...

Category: 409: other packaging machinery
New in: 1998
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Automatic Crate Magazine Vertical Storage System SIMONAZZI An automatic crate magazine storage system made by SASIB in 1998. The system consists of two magazine storages. The larger magazine stacks crates in three parallel rows, it has two infeed and two outfeed lanes of conveyors and the storage capacity is over 600 crates. The other magazine has the capacity of over 200 crates, is built upon a single conveyor lane and both the infeed and outfeed are from the same side. The storage magazines have been used as buffers between crate washer and packer and before palletizer. The capacity of the original line was 80.000 bph. Technical data Manufacturer: SASIB Beverages S.p.A., Italy Year ...

Category: 401: filling machines
New in: 2000
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Glass Bottle Filling Line KRONES one way 54.000 bph Complete line for bottling beer, carbonated and non carbonated soft drinks in one way glass bottles at nominal capacity of 54 000 bph. It was delivered by Krones in year 2000 and it was in operation till 2015 and is currently installed and powered. Equipment is very well maintaned and it has a complete techncial documentation in English. Main Characteristics - Capacity 54 000 bph at 0.33 liter bottles - Made by Krones in year 2000, in operation till 2015 still installed - Bottle volumes 275, 330 ml and earlier also 660 ml bottles - Total operating hours approx 70.000 - One way line for new glass bottles - Secondary packaging K ...

Category: 1300: other machines and plants
New in: 2012
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Steel Pipe and Hume Pipe Coating Machine(for 6m, 12m) Manual Shot equipment and AC Tower Make:Hana(Korea) Year:2012 Room size(W,L,H) : 20000 x 20000 x 6500? Cap' : Blast nozzle dia. 12ø x 6set Hopper Dim(W,L,H): 1000 x 16000 x 750? 1-hopper grating type Belt conveyor Dim(W,L,H): 740 x 600 x 15000? Cap': 100ton/hr Bucket elevator Dim(W,L,H): 915 x 350 x 12000? Cap' : 100ton/hr Drum separator and storage tank Dim(W.L,H): 700 x 3960x 1220? Cap' : Screw conv. 100ton/hr Storage tank. 120ton/hr Dust collecor Dim(W,L,H): 2538 x 6500 x 7184? Type: Bag filter and Pulse air jet type Control system Type: Hand p ...

Category: 107: sheet metal working
New in: 2012
Price: request quote
Location: Land-kr KR
Seller: BMJ KOREA

Steel Pipe and Hume Pipe Coating Machine(for 6m, 12m) Manual Shot equipment and AC Tower Make:Hana(Korea) Year:2012 Room size(W,L,H) : 20000 x 20000 x 6500? Cap' : Blast nozzle dia. 12ø x 6set Hopper Dim(W,L,H): 1000 x 16000 x 750? 1-hopper grating type Belt conveyor Dim(W,L,H): 740 x 600 x 15000? Cap': 100ton/hr Bucket elevator Dim(W,L,H): 915 x 350 x 12000? Cap' : 100ton/hr Drum separator and storage tank Dim(W.L,H): 700 x 3960x 1220? Cap' : Screw conv. 100ton/hr Storage tank. 120ton/hr Dust collecor Dim(W,L,H): 2538 x 6500 x 7184? Type: Bag filter and Pulse air jet type Control system Type: Hand p ...

Category: 1300: other machines and plants
New in: used
Price: 399 €
Location: Schramberg
Seller: USEDmarket GmbH

Set includes: â?¢ Manufacturer: I-KEYS â?¢Type: SC904NT â?¢ 1 access controller (Photo 2 + 3 + 4) o housing with modern and efficient 12V switching power supply o dimensions: 28 x 23, 5x7cm o with lockable door o with an integrated switching power supply 100-250V - 12V o DC ø Max simultaneous sampling 5A o stabilized over voltage proof, electronic overload and short circuit protection, o weight: 1.42 kg o with 4 inputs for Wiegand readers o with 4 relay outputs o user storage: 20,000 people o event memory: 100,000 o including TCP/IP connection â?¢ 3 RFID & PIN code reader with touch input sTouch-reader-R-w (P ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)