automatic storage system used for sale

YEAR 2023. Equipped with 8 TW type disc filter units operating in parallel. Automatic cleaning system. Two pressure sensors measure the inlet and outlet pressure. SIEMENS PLC with HMI screen for system control.

Overview This KHS Corvus is a skid-mounted cartridge filtration system (microfiltration), built in 2007 by KHS AG in Dortmund, Germany. Four stainless steel KHS cartridge filter housings for 40-inch cartridges are connected through a pneumatically operated valve manifold and controlled from the skids own stainless steel control cabinet with Siemens PLC. The Corvus range is designed for clarifying filtration, cold sterile filtration and safety filtration of wine, beer and water ahead of the filler. This unit was last used for wine filtration in a bottling line. Technical data Manufacturer: KHS AG (Dortmund, Germany) Model: Corvus Year of manufacture: 2007 (filter housings 2006) Machine type: cartridge filtration system (microfiltration), skid-mounted Filter housings: 2 housings for 19 cartridges of 40 inch, 143 L each; 2 housings for 12 cartridges of 40 inch, 108 L each Housing design rat ...

NEARLY NEW. For fast and uniform loading of granular products and pellets into ISO containers. Standard capacity up to 240 m3 h and main motor 11 kW. Includes feed hopper throwing unit auxiliary ventilation electrical panels controls platform handrails and ladder. Serial number 488981. We are currently selling the industrial assets of PLASTIVERD, a manufacturer of PET (polyethylene terephthalate) resin. Other machinery and equipment from the same facility are available at our site Tega Activos.

FANUC CRX-10iA/L robot system with SATA ink supply and associated application technology. The system was procured in 2023 and operated for a total of only about 0.5 operating hours. It is particularly suitable for automated painting, coating and dispensing applications. Sending of the sales exposé on request.

I sell the Weima ZM30 vertical wood shredder Built in 1995 Cylinder system with 4 shafts. 2 motors 11 + 11KW Only 1850 working hours Condition very good. Available same.

TRUMPF TrumaWeld L1000 laser welding system – built in 2004 For sale is a used TRUMPF TrumaWeld L1000 laser welding system for industrial laser processing. The system has a large work table of approx. 2,000 x 1,000 mm and enables flexible positioning of workpieces. It is particularly suitable for precise laser welding work on metallic components. Technical data: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: TrumaWeld L1000 Year of Make: 2004 Serial / Machine Number: A0460A0007 Mains connection: 400 V / 50 Hz Connected load: 11 kVA Control voltage: 24 V DC Required fuse: 3 x 16 A Compressed air connection: 7–10 bar Inert gas connection: argon, 10 bar Work table: approx. 2,000 x 1,000 mm Total dimensions: approx. 2,000 x 1,800 x 2,050 mm The machine is currently in storage and is not connected. An inspection under power or an up-to-date functional test is ...

M.T.A. TAE 502 – Industrial Chiller / Process Water Chiller / Chiller For sale is a used industrial refrigeration unit M.T.A. TAE 502, built in 2003. The cooling unit was used as part of an industrial TRUMPF laser system and was used to cool the laser system. Technical data according to the nameplate: Manufacturer: M.T.A. SRL Model No.: TAE 502 Year of Make: 2003 Serial number: 2200 018 351 Voltage: 400 V Phases: 3 Frequency: 50 Hz Max. current consumption: 100 A Installed capacity: 59.0 kW Degree of protection: IP54 Max. operating pressure water circuit: 6.0 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant charge: 2 × 15.0 kg Max. refrigerant pressure: 22.6 bar LP / 28.0 bar HP Permissible ambient temperature: 5–40 °C Weight: approx. 1,430 kg The device is currently in storage and is not connected. An up-to-date functional test or demonstra ...

CONTROLS   CNC controls SLM ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2600 mm   space requirements -front/back-: 1200 mm   total height: 2700 mm 3D metal printer Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness: 20 μm - 90 μm Min. feature size: 150  ...

used Herburger roll forming machine, infinitely variable adjustment via Quickset system from sheet width 280 – 840 mm, : latest technology, hardened and with Drive elements in the rollers (rubber inserts) Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

used Schlebach roll forming machine, with roller shears, meter counter Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Sheet width 800 mm Sheet thickness steel 0.7 mm Sheet thickness stainless steel 0.5 mm Sheet thickness aluminium 0.8 mm Machine weight 325 kg Dimensions 1600 x 1370 x 850 mm Total power requirement 230 V Colour grey/blue Profile height 25 mm Width adjustment 250 - 850 mm Roll forming speed 11 m/min Machine number 16085527

Manufacturer: RBC Robotics GmbH Type: Automation Brose oKMV Year: 2022 Machine No.: 20380 Length: approx. 20,000 mm Width: approx. 1500 mm Height: approx. 3000 mm Number of robots: 5 Power supply: 3× 400V+N+PE/60Hz Power: 57 kW Max. protection: 100 A Control Voltage: 24V DC Network Layout: TN-S Max. Short-circuit current: 10 kA Pneumatic working pressure: 6 bar Weight: 25 t Equipment: Production parts receiving and transferring stations KUKA industrial robots: Manufacturer: KUKA Series: CYBERTECH-2 Model: KR 16 R2010-2 / SEL Number of robots: 5 Year: 2022 Number of axles: 6 Load capacity: 16 kg Reach: 2013 mm Weight: 296 kg

PLP MT100 Paddle coating machine 2022, Stainless, The coating system MT is a complete machine able to mix in line pellets, kibbles, and other granulated products with additives such as liquid enzymes, fat, digest, aromas, oil, medicines, vitamins, complete with two shafts and adjustable paddles to mix and hold the product, capacity up to 50T per hour, with twin 5.5Kw motors, with heating, comes with 1500Kg buffer holding tank, infeed conveyor, paddle coater and outfeed conveyor

Gimon RG1000.2000 Drum coating system Serial: 14214 2018, Stainless, consists of 1100L stainless hopper on weigh cells, feeds onto continuous conveyor scale, feeds into Gimon disc coater and into Gimon drum coater fat drum, also comes with 1000L stainless IBC previously used for oil,

A Trützschler fiber cleaning machine incl. feed table and control cabinet as well as a Trützschler feeding/opening unit for fiber material is offered. 1) A Trützschler CVT3 1600 fiber cleaning machine, year of manufacture: 1997, design: enclosed machine housing, several access doors, several inspection windows, material/air connection in the upper machine area, material feed via a feed table. Including feed table and control cabinet. 2) Trützschler CS feeding/opening unit, year of manufacture: 1988. Inspection possible by arrangement.

- Mobile sand dosing station for machería. - System consisting of two upper sand storage hoppers. - Travel trolley on rails for feeding several machines. - Motorized movement between working positions. - Timed dosing system. - Includes raised metal structure for support and access. - Electrical panel with SIEMENS SIMATIC HMI display and SIEMENS PLC automation. - Application for automatic feeding of foundry core manufacturing machines. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-9

Compact X-ray inspection system for packaged food, This Ishida IX-EN-2493-S is an X-ray inspection system built in 2015 by the Japanese manufacturer Ishida. It detects high-density foreign bodies in packaged products, such as ferrous and non-ferrous metals, stainless steel, glass, stone and bone. The tunnel is 240 mm wide and 150 mm high, the belt runs at a variable 10 to 60 m/min and handles products up to 5 kg and from 20 to 450 mm long., The machine is built in stainless steel (SUS304), has an IP66-rated inspection chamber and is operated via a 15-inch touchscreen. The line sensor has a resolution of 0.4 mm. Actual detection sensitivity depends on the product, its dimensions, the packaging and where the contaminant sits., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/2015-ishida-ix-e ...

Dimensions (L/W/H): 2.645 x 900 x 2.130 mm Filter capacity: 14,5 m² Number of filters: St. Number of dust containers: 3 St. Weight: ca. 500 kg Dimensions (L/W/H): mm : 200 mm : mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used ESAB CXL-DX 3500 plasma cutting machine (2016). Table suitable for large format sheets with a usable metal area of 12,000 mm (length) x 2,500 mm (width). Specified cutting capacity: 360 amps. A complete extraction system is included. Key details - Manufacturer: Esab - Model: CXL-DX 3500 - Year of construction: 2016 - Table/work surface: 12,000 x 2,500 mm (metal length x metal width) - 1 x Plasma Specified Cutting Current/Power: 360 Amps -1 x Autogen - Included: complete extraction system

Frigotecnica FT 2800 S Flake-Ice Maker Used industrial flake-ice maker with a production capacity of approximately 2,600–2,900 kg per 24 hours. The unit is designed for use with a separate refrigeration and condensing system. Manufacturer: Frigotecnica Model: FT 2800 S Production date: 05/2019 Serial number: 3411 Ice production: 2,600–2,900 kg/24 h Electrical supply: 220/380 V, 50 Hz Gearmotor: 0.11 kW Machine weight: 140 kg Approximate dimensions: 1,800 x 850 x 1,000 mm The flake-ice evaporator is offered in used condition with visible oxidation, corrosion around refrigeration connections, deteriorated pipe insulation and disconnected electrical connections. Refrigeration and condensing equipment is required for operation. Auction-ID: A7-50995-5

LD Systems DP2400X DEEP2 Series 2-Channel Amplifier Power: 2x 1200W / 2 ohms, 2x 950W / 4 ohms, 2x 600W / 8 ohms Bridge power: 1600W / 4 ohms, 1300W / 8 ohms Circuit Class H Frequency response: 20 Hz - 20 kHz Signal-to-noise ratio: 106dB Distortion ratio (THD): < 0.1% Damping factor: >,450 Crosstalk: >76dB Power Amplification (Gain): 39dB Input Sensitivity: 0.775V Protection circuits: Peak limiter, Overheating, DC component protection, Short circuit Settings: 2 x High Pass / Low Pass (Switchable), Power Switch (On/Off), 2 x Volume Control, Bridge/Stereo Mode Selector, Ground Lift Indicators: Protect (protection circuit on), Level, Power, Signal, Limit Speaker Outputs: 2 Input Connectors: XLR/ 6.35mm Jack (Combo) Speaker output connectors: terminal blocks, speakON, LINK XLR Cooling: High efficiency, automatic Weight: 17.6kg Dimensions: 483 x 88 x 350 mm Auction ...

LD Systems DP2400X DEEP2 Series 2-Channel Amplifier Power: 2x 1200W / 2 ohms, 2x 950W / 4 ohms, 2x 600W / 8 ohms Bridge power: 1600W / 4 ohms, 1300W / 8 ohms Circuit Class H Frequency response: 20 Hz - 20 kHz Signal-to-noise ratio: 106dB Distortion ratio (THD): < 0.1% Damping factor: >,450 Crosstalk: >76dB Power Amplification (Gain): 39dB Input Sensitivity: 0.775V Protection circuits: Peak limiter, Overheating, DC component protection, Short circuit Settings: 2 x High Pass / Low Pass (Switchable), Power Switch (On/Off), 2 x Volume Control, Bridge/Stereo Mode Selector, Ground Lift Indicators: Protect (protection circuit on), Level, Power, Signal, Limit Speaker Outputs: 2 Input Connectors: XLR/ 6.35mm Jack (Combo) Speaker output connectors: terminal blocks, speakON, LINK XLR Cooling: High efficiency, automatic Weight: 17.6kg Dimensions: 483 x 88 x 350 mm Auction ...

LD Systems DP2400X DEEP2 Series 2-Channel Amplifier Power: 2x 1200W / 2 ohms, 2x 950W / 4 ohms, 2x 600W / 8 ohms Bridge power: 1600W / 4 ohms, 1300W / 8 ohms Circuit Class H Frequency response: 20 Hz - 20 kHz Signal-to-noise ratio: 106dB Distortion ratio (THD): < 0.1% Damping factor: >,450 Crosstalk: >76dB Power Amplification (Gain): 39dB Input Sensitivity: 0.775V Protection circuits: Peak limiter, Overheating, DC component protection, Short circuit Settings: 2 x High Pass / Low Pass (Switchable), Power Switch (On/Off), 2 x Volume Control, Bridge/Stereo Mode Selector, Ground Lift Indicators: Protect (protection circuit on), Level, Power, Signal, Limit Speaker Outputs: 2 Input Connectors: XLR/ 6.35mm Jack (Combo) Speaker output connectors: terminal blocks, speakON, LINK XLR Cooling: High efficiency, automatic Weight: 17.6kg Dimensions: 483 x 88 x 350 mm Auction ...

Build volume including build platform: 250x250x325mm, laser type: Yb fiber laser (ytterbium), 1x 200W, 1x 400W, manufacturing process: metal powder bed fusion (DMLS/SLM), precision optics: F-theta lens, high-speed scanner, max. scanning speed: 7m/s, variable focal spot diameter: 100-500µm, power supply: 32A, connected load: 8.5kW, nitrogen generator: integrated, compressed air supply pressure: 7,000hPa, volume flow rate: 20m³/h, argon supply pressure: 4,000hPa, volume flow rate: 100l/min, length: 2,200mm, width: 1,070mm, height: 2,290mm, min. recommended installation space: 4,800x3,600x2,900mm, weight: 1.325t, operational hours counter: 1138h, both lasers must be configured or initialized before operation. On-site inspection is possible.

The Chocoma chocolate coating machine pictured is sold. This comes from a confectionery and was used to coat Baumkuchen with chocolate. It is an older machine, which should possibly be improved at one or the other corner. Nevertheless, the machine works, a video of the test run is available on YouTube, just enter the ebay article number there. The machine must be thoroughly cleaned before use More pictures available

We sell a Gulliver Suprema in a good bakery condition. A video of the running machine can be sent.

30 Watt CO2 Laser Working area: 457 x 30 mm Engraving and cutting of wood, paper, rubber, acrylic, etc. Extraction Atmos Cube PC: HP ProDesk 400G7 Small Form Factor PC incl. monitor, keyboard and mouse. Software: RayJetManager pre-installed

Overview This Krones preform feeding system stores preforms in bulk and delivers them, oriented, to the infeed of a stretch blow moulding machine. It was in production until March 2026, feeding a Krones Contiform S24 blow moulder. The preforms are tipped into the buffer silo, carried up by the inclined preform elevator and aligned on the roller sorter, which hands them over in a continuous row to the blow moulders infeed rail. The access platform gives the operator safe access to the roller sorter. Technical data Manufacturer: Krones Machine type: preform feeding system for a stretch blow moulding machine Operated with: Krones Contiform S24 blow moulder In production until: March 2026 Scope of Delivery Preform buffer silo | Krones | stainless steel hopper with access stairs Preform elevator | Krones | inclined elevator from the silo to the roller sorter Roller sorter | Krones | orients t ...

Trumpf TruLaser Robot 5020Year of manuf. : 2010 ____________Description:TruDisk 3302 laser system:- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad:- Output power of 3.3 kW at the workpiece:- Laser system with 1 cavity:- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control:- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data:- Fast laser power control:- TruControl 1000 control system:- Storage capacity for 199 laser programmes:- Safety monitoring in accordance with laser safety class 1, including a central safety lock:- Protection class IP54:- 10.4 panel computer with TFT touchscreenExtension of the beam path:Plus 1 additional laser light cable output, including interface card:consisting of::# Optical a ...

Cutting height: 175 mm Motor output: 15 kW cutting width: 620 mm Cutting length: 5200 mm Dimensions (L/W/H): 7000 x 1470 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 175 - 210 mm Motor output: 15 kW cutting width: 620 mm Cutting length: 5200 mm Dimensions (L/W/H): 7000 x 1470 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Big bag filling station for filling large plastic bags in batch operation. Support frame made of galvanized steel, screwed and dismountable. Stainless steel inlet nozzle on the upper frame. Among them is a filling head with a clamping ring for clamping the big bag nozzle. Pneumatic cylinder attached to the frame. Seven brackets for attaching the big bag loops. Set of galvanized pipes as additional brackets, total length approx. 2200 mm. Second galvanized frame is part of the lot. Unbalance motor for compacting the filling material is included loosely. Two stainless steel sieves are loosely included. Parts in contact with the product in stainless steel. Used in the food, feed, chemical and building materials industries. Plant dismantled, signs of wear present. All dimensions and weights are approximate. Auction-ID: A1-51072-19

The industrial filtration system is used for suction and filtration of oil mist, emulsion mist and suspended solids from the air, as they arise during metal processing. The multistage filter system cleans the intake air and contributes to the improvement of air quality in the workplace., Mains connection: 400 V, Frequencies: 50 - 60 Hz, power consumption: 1.5 A at 60 Hz , engine power: 1,15 kW

Suitable for cleaning coolant- and oil-containing grinding mist., Blower capacity: 2400m³/h , Suction power: up to 1200 m³/h , noise level: 75 dB A , Pressure differential: 840 Pa, Connection value: 6kW (230V/50HZ) , Dimensions W x D x H =: 800 x 625 x 610 mm , Weight approx: 100 kg , colour: Gray

We sell a Trima K2 head machine in TOP CONDITION

Compact roll line KÖNIG / LIPPELT, type: G 2000 -In bakery condition- For Kaiser rolls, long rolls, hot dog rolls, and normal round rolls. - Mini Rex 4000 TR/G head machine - Weight range: 35 - 85 g - Knitting drums: SKG58 and RK58 (for softer doughs) - Capacity head machine: max. 4,000 pcs./h - Proofer capacity: max. 2,500 pcs./h - Condition: Good - Ready for immediate use Visits and test runs are possible by arrangement.

Compact bread roll line KÖNIG, type: G 2000 -In very good bakery condition- For Kaiser rolls, long rolls, hot dog rolls, and normal round rolls. - Mini Rex Futura head machine - Weight range: 30 - 130 g - Condition: very good - Ready for immediate use Visits and test runs are possible by arrangement.

Non-contact 2D and 3D measurement Connection of up to 2 measuring heads Maximum frequency in 2D mode: 1 kHz Maximum frequency in 3D mode: 16 kHz depending on configuration Up to 1,000 recordable control parameters Up to 100 measurement tools per configuration Minimum display resolution: 0.1 μm 1000BASE-T / 100BASE-TX / 10BASE-T Ethernet Interface RS-232C Interface USB Ports RS-422 encoder input / open collector Analog monitor output RGB XGA 1024 x 768 2 SD card slots USB hard drive connection up to 2 TB Power supply: 24 V DC ±10% Maximum power consumption: 3.3 A Operating temperature: 0 to +45 °C depending on installation Permissible relative humidity: ≤ 85%, non-condensing Auction-ID: A1-51172-135

Multi-axis control architecture Simultaneous control of multiple axes Speed, torque and position control Linear and rotary motion control Return of 1 Vpp SIN/COS incremental encoder EnDat absolute encoder compatibility depending on configuration 2-axis control modules Single-axis and dual-axis power modules depending on configuration Common continuous bus between modules Industrial Communication Interfaces Digital and analog inputs and outputs depending on configuration Connections for encoder returns and motor signals Built-in positioning functions depending on configuration Power and communication wiring included Industrial connectors and terminal blocks included Auction-ID: A1-51172-137

Image Intensifier M10495 Cooling Controller C10520 Cooling Unit C10520-02 Head/intensifier with HVPS optics C10520-02. ➜ Functional, but coolant leaked → damaged paint and dehumidification system Auction-ID: A1-51157-18

Used Applied Biosystems ABI Prism 7900HT Sequence Detection System With documentation, manuals, software disks, cables and computer system with software. Auction-ID: A1-50936-95

Used Neon Inviting Transfection System with Pipette Holder. Manufacturer: Life Technologies | Neon Voltage: 100-240V (50/60Hz) Auction-ID: A1-50936-192

MKS 600 Series Pressure Controller (10 Torr) Type 252 Exhaust Valve Controller Type 152 Automatic Pressure Controller Baratron 390HA-00100SP12 (100 Torr) Valves & Actuators Tags HP Lamination Auction-ID: A1-51157-19

Process bench \"2M PROCESS\" Bronkhorst Coriolis flowmeter CORI-FLOW Bronkhorst control valve EMC module Bronkhorst E-7100 controller/power supply RS232 and Modbus interfaces Auction-ID: A1-51157-1

Used Hönle VG UVAHAND 250 GS UV lamp system in box. Voltage: 230Vac (50Hz) Auction-ID: A1-50936-39

EM-CCD Camera Hamamatsu ImagEM X2 Filter Exchanger Hamamatsu C8214 Lens and Associated Optics Interference Filters (461HBP40, 510HBP10, etc.) Mount and Mechanical Stand Auction-ID: A1-51157-6

Offer 26288 Technical data: - Operating pressure 10 bar - Delivery rate 520 l/min - Drive 400 V / 7.5 kW - Engine speed 925 rpm - Air tank 270 L - separate refrigerant dryer BEKO - DRYPOINT type DPRA 35 AC Bj.13 - Space requirement approx. W 1600 x H 1200 x D 600 mm - Space requirement dryer approx. W 350 x H 800 x D 450 mm - Weight approx. 300 kg

Manufacturer: DALEX Model No.: KP 320 Year: 2013 Condition: Used Stock number: 9623

ID3887 Esta Dustomat 4-24 year/Year of construction 2023 Dust extraction system, Vmax 3,300 m³/h Dedusting system, Vmax. 3,300 cbm/h

Complete filling and palletizing system for potting soil, potting soil and similar products. Consisting of: bias tape for feeding the material, flow-wrapping machine with continuous film feeding / sealing and WIKO-Piehler Pikomat WH2 layer palletizer. Suitable for bag sizes from 5 to 40 litres. Average output: 10 cycles per minute (= 600 bags per hour). The plant is in regularly maintained condition and has been in production until it was shut down.

# Complete Industrial Steam Generation and Distribution System – 2 × Sincal HK-1000 Boilers Overview Complete industrial steam generation, heat recovery, water treatment and distribution system comprising two Sincal HK-1000 fire-tube steam boilers, fitted with Baltur industrial natural gas burners and economizers, together with electrical control systems, safety instrumentation, feedwater equipment, steam headers, pipework and associated auxiliary components. The installation also includes three wall-mounted Baltur auxiliary boilers configured for commercial propane (G31), with associated circulation pumps, hydraulic connections, valves, flue gas outlets and control equipment. According to the available information, the two main Sincal boilers are new, installed and unused. The installation presents a very good overall visual condition. Offered as a complete industrial ...