automatic storage system used for sale

E.C.H WILL ROTEX – TRI Year: 1987. One real stand. Diameter 1.2 max width 96 cm 4 hole perforation Print 2/2 Cross cutter 2 cover feeder Counting and collecting, Stitching unit Folder, Square back press. Long side cutting/short side cutting Speed: 400 m/ min Max 60 stroke/ min Cross Cuter: 300 mm, 355 mm, 420 mm and 455 mm From spare parts have gears for sheet count, knifes, stitching heads, printing cilindars.

Available for sale 2 x NEVER USED Leroy Somer Automatic Voltage Regulator R713. The 3F R713 or R723 modules are used in connection with a R200 series regulator for equalizing the voltage of an alternator with that of the network before coupling, when the installation operates automatically or when manual equalization of these voltages is not possible. This prevents excessive current caused by coupling a network to the machine when both are not at the same voltage. This difference in voltage is usually due to fluctuations in the network voltage because the alternator is regulated at a constant voltage except for cases of voltage droop). On some networks these fluctuations can reach ± 10%. Equipment never used and in good working conditions. Consumption: < 2VA Response time: < 300 ms Dissipated power: < 1W Temperature Shift: 1% of Un for delta T ambient variing from -20° to 2 ...

Semi-automatic flocking system Flockkabine Manufacturer: The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. Plant size: Width: approx. 6.5 m Depth: approx. 2.8 m Height: 3, 3 m Lock doors Width: approx. 900 mm Height: approx. 600 mm

Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...

We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.

Capacity: 6,000 - 8,000 cups/hrs Number of tracks: 4-lane longitudinal runner Closure: Sealing Schuy + Folmeg Maschinenbau GmbH is happy to overhaul this system for you. All electrical and pneumatic components are brought up to date and mechanical components are overhauled and 80% of new quality is available. You will also receive a 1-year warranty for the system. Please contact us.

Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz

Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes

CNC – controlled double miter precision circular sawing machine of very high quality, designed for demanding metal construction, which requires a rational and precise cutting. Miter adjustment range infinitely variable - 90° / + 90°, cutting range 0° - 240 x H 85 mm or 125 x 125 mm or 140 mm / 45° - 150 x H 100 mm or 120 x 120 mm or 140 mm - 60° - 130 x H 80 mm or 120 x 120 mm or 130 mm, Saw band drive power 7.5 kW - saw blade speeds 13/26 - 17/34 - 52/104 - 74/148 - 105/210 m/min - saw blade diameter 425 mm, saw table height 1,000 mm, largest material feed per stroke 1,500 mm - drive by ball roller spindle CNC control with touchscreen and color graphics - software for automatic pushing and pulling the profile rod - extremely easy programming and operation - cut lists can be loaded as an Excel file, dimensions 1.2 x 2.1 m x H 1.9 m, weight 1,250 kg

PLC – controlled high-performance precision cold-circuit sawing machine with very high quality loading magazine – equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of steel and stainless steel rods – high-strength alloys – forged materials and similar materials and similar materials Saw blade dimensions 460 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 150 mm or 130 x 130 mm - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits the material loss, saw blade speeds 60 to 130 rpm, controlled unloading slide for two different unloading positions, largest bar length in the loading magazine 6,000 mm, maximum material weight in the loading magazine 3,000 kg, largest material feed per fee ...

PLC – controlled high-performance precision cold-circuit sawing machine with loading magazine and unloading magazine of very high quality - equipped with software for industrial production in accordance with Industry 4.0, designed for the precision cutting of rod material – tubes and hollow profiles made of steel and stainless steel Saw blade dimensions up to a maximum of 315 mm x 2 mm to 2.5 mm, maximum cutting range 0° - 12 mm to 80 mm tubes and hollow profiles - 12 mm to 40 mm solid material - saw blades made of TCT material are normally used (TUNGSTEN CARBIDE TIPPED) - this material allows very high cutting speeds and low saw blade thicknesses, which significantly limits material loss, saw blade speeds 20 to 130 rpm - optionally available with different saw blade speeds, controlled unloading unit for four different unloading positions - largest automatically unloadable sectio ...

Pallet feeder – separating head Vaculift - Vacubelt 6 buckles Gate fold Compressor Without delivery

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

press is after overhaul: full function complete mechanical parts, pneumatic and control system. The press has a new pneumatic clutch, the original was electromagnetic clutch as old system. Press capacity: max. 45 t Pull force: max. 45 t Counter force in pressing position: max. 17 t Stroke of the punch: 175 mm Filling height: max. 140 mm Deduction: max. 85 mm Compression distance: max. 55 mm Top pressing: max. 15 mm Stroke rate: 9 – 26 min.-1 Motor: 7,4 kW Approx: 3000x1200x1800 mm Net weight: about 5000 kg

Machine Details Stock-No. 1105-03889 Type of machine CNC Lathe Make FEMCO-ASTRHAL Type 20-60 Year of manufacture 1989 Type of control CNC Storage location HAGUENAU Country of origin taiwan Delivery time IMMIDIATELY Freight basis ex stock Price Technical details turning diameter 540 mm turning length 600 mm control Fanuc 10 T turning diameter over bed 540 mm turning diameter over slide 255 mm rapid traverse 15 (X/Z) m/min power capacity 11-15 kW Tool Numbers 12 chip conveyor 1 kW Additional information CNC-lathe clamping tool, main spindle, power chuck TAILSTOCK CHIP TANK cnc control fanuc 15 T 42 DIAMETER HOLE TTHE SPINDLE 11/15 KW 3500 RPM

Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.

Product number: 1940P Type: AGOL-850 Order number: ON17163 Year of construction: 2015 Capacity: max 800 pigs/hr. Products: pork carcasses, left & right Slaughtered weight: 70 - 120 kg Air pressure: 6 - 8 Bar, 285 Nl/min. Power: 3 x 400V, 50Hz, 45kW Dimensions: 10000 x 5150 x 2300 mm NEW in box, never used

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.

1st unit : M7/46 – 2 buckles 2nd unit : M7/46 – 2 buckles SBAP 46-ME-52 delivery

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

Product number: 2783 Type: Titaan 2-90 Serial number: HTN10220019 Year of construction: 2023 Chamber: 840 x 890 x 220 mm Seal bar: 2 x 840 mm Cycle: 30 - 50 sec Vacuum pump: Busch 300 m³/hr Compressed air: 6 Bar, 100 Nl/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2450 x 1100 x 1150 mm Weight: 850 kg Automatic lid and outfeed conveyors Hellings conveyor Type: 12980-10 Serial number: 790311 Year of construction: 2021 Belt width: 600 mm Length: 3000 mm Henkelman diptank Type: 200A Serial number: H0D20220008 Year of construction: 2022 Heating: electric Usable space: 575 x 1100 mm Emersion depth: 200 mm Cycle time: 22 sec Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 2500 x 1350 mm Weight: 310 kg

- Minimum quantity spraying device (option) - Roller conveyor 400mm with intermediate plates and machined surfaces (option) for measuring stop - Additional support leg (option) - Attachment kit for fixed connection (option) - Measuring track with magnetic reading strip (option) - Stop, hand-operated, roller guide and digital display (option) - Saw blade dimensions: 3100 x 27 mm - Cutting range at 90 degrees around 250 mm - Cutting range at 90 degrees square 220 mm - Cutting area at 90 degrees rectangular 275 x 180 mm - Cutting range at 45 degrees around 200 mm - Cutting range at 45 degrees square 180 mm - Cutting area at 45 degrees rectangular 190 x 130 mm - Cutting range at 30 degrees around 130 mm - Cutting range at 30 degrees rectangular 125 mm - Cutting area at 30 degrees square 130 x 110 mm - Cutting speed 37/74 m/min - Hydraulic feed - Lifting brackets hydraulic ...

specifications: Up to 400 PCS/MIN, 8 sealing heads, continuous rotary sealer. Vial diameter (mm) DF: Min 14, Max 52. Vials height (mm) HF: Min 35, Max 110. Cap diameter (mm) DC: Min 13, Max 33. Cap height (mm) HC: Min. 6, Max. 16. Power: up to 400 rpm. Standard voltage: 400V - 50 Hz.

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Automatic horizontal packaging machines Model:NT-250 Voltage:AC 220/50 Film width:Max.250mm Power:2.4KW Bag length:65~190mm or 120~280mm Bag width:30~110mm Product height:Max.40mm Film diameter:Max.320mm Pack speed:60~120bags/min Machine size:37706701450mm Weight:480kg

Automatic dates/olive gutting machine Motor power: 1:5 kw operation mode: Automatic Weight: 350 kg Size : 100 x 1000 x 1000 Output : 150 kg/ Hour Power supply : 380 v Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

Automatic vegetable cutting machine Material: Stainless steel Dimensions: 13006001100mm Net weight: 100kg Voltage: 220V/380V Frequency: 50Hz Capacity: 200-700kg/h Diameter: 250 mm Power: 1500w Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

Automatic vegetable chopping machine Voltage: 220V Power: 1500w Weight: 10kg Dimension(LWH): 304369c Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm

Code 93024 Description Chucking lathe Make Warner & Swaswy Model 0 - AC Serial No. 2083651 Year 1972 Swing over bed 200 mm Swing over gap 200 mm Swing over crossslide 200 mm Spindle bore --- mm Longitude: 140 mm Cross: 100 mm Chuck : 160 mm Bore: 20 mm Number of spindle speeds 32 Spindle speeds 58 - 2507 rpm Feeds Longitude and cross Motor power 5,5 kW – 380 Volts Accessoiries hydraulic 3 chuck coolant Condition Machine is in good condition.

Code 96380 UMSCHREIBUNG Volautomatische Kaltkreissäge Fabrikat Kaltenbach Model KKS 400 NA Machine Nummer 1700 - 03004 Baujahr 1982 Rechtwinkeler Schnitt Rund à 90º 130 mm Viereckig à 90º 315 x 50 mm U-profiel à 90º 24 x 85 mm Sägeblatt Durchmesser..………………… 400 mm Sägeblatt in Graden verstellbar 0 – 180 º Drehzahlen 10 – 14 – 20 UpM Hauptmotor Leistung…………………… 0,9 – 1,2 – 1,8 PS Anschluss spannung……………………. 380 Volts Zubehör Lademagazin Automatische laden bis 1700 mm Maschine Maschine ist in gutem Zustand

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

Belt Strapping Machine Strap Strapping Device Manufacturer Mosca Verpackungstechnik Maschinenfabrik Gerd Mosca GmbH 69429 Waldbrunn Type RO-TR500-4 Year of construction 2001 Current connection 3 AC 400 Volt Current consumption 1.5kW 50Hz 2.5A PLC Siemens Simatic OP7 The machine can work both manually and automatically. The conveyor belt brings the packaged goods to the right place and the machine then strapping. Operating states Machine An automatic Open a frame Cut off tape

saw blade diameter: 350 mm capacity 90 degrees: round: 115 mm capacity 90 degrees: square: 95 mm : 180 x 95 mm Working height: 925 mm saw blade turning speeds: 15 - 90 U/min total power requirement: 3,0 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 0,8 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling machine DECKEL MAHO DMG 125

Böllhoff Uniquick Vario automatic screw feeder UNIQUICK Feeder Type 360 Plastic sorting pot ∅ 360 mm Quiet and surface-friendly conveying Optimal spiral dimensioning depending on the material to be conveyed (width and height) Integrated and controlled chicane High wear resistance Uniform flow rate due to amplitude control In a soundproofed housing on a frame Web width: 20 mm Head Ø of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) Tape Bunker Bunker trough, chute: stainless steel Strap: white with FDA approval Filling volume: 10 litres Max. filling weight : 35 kg Drive: AC gear motor 230V/50Hz Bunker with innovative drive to ensure metered, quiet and part-friendly feeding of screws and connecting elements. UNIQUICK Multi Modularly expandable 3-fold crossover Distributes the tested screws to three st ...

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...

GILDEMEISTER TWIN 65 CNC automatic lathe was built in 2005 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine is used for precise, multi-axis machining of workpieces with complex geometries. To increase overall production efficiency, a combination of two spindles and two 12-position turrets with excellent technical specifications are used inside the large working area. Both spindles feature a C-axis with a high indexing accuracy of ± 0.002 mm, which facilitates complex machining operations that require precise positioning of the workpiece. All this is complemented by an intelligent SIEMENS CNC control with an intuitive interface. The GILDEMEISTER CNC turning center weighs 10000 kg. Technical specifications of the GILDEMEISTER TWIN 65 CNC lathe General data - number of axes: 8 (X1, X2, X3, Y1, B, Z1, Z2, Z3) - feed in the X1/X2/X3 axis: 300/180/175 mm - feed in the Y1/B ax ...

GERDA HYDOMAT PAWN 100 automatic press was built by GERDA HYDOMAT S.A. in Poland in 2001. The machine, with a high press force of 100 tonnes, is dedicated to the mass production of precision steel parts. All machining processes, i.e. precise stamping and threading of the workpieces, are performed fully automatically. The sheet metal feeder accurately feeds the material into the workspace, where the slider and reliable threading head are located. The design, which is made from the highest quality raw materials, in turn maintains the highest stability during even the most intensive challenges. The GERDA HYDOMAT hydraulic press weighs 5200 kg. Technical specifications of the GERDA HYDOMAT PAWN 100 press - press force: 100 t (1000 kN) - work table dimensions (L x W): 700 x 320 mm - height of working space: 250 mm - slider stroke: 0-70 mm - number of slider strokes: 10-40/min - numbe ...

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

CNC automatic lathe Traub TNL 32-7 • Version TNL32/TNL32K alternating mode • Control TX8i-s • Main spindle passage 32 mm, with C-axis • Counter spindle incl. partial hollow stress • Revolver top X/Y/Z/H axis: 10 shots dual drive • Revolver bottom X/Y/Z/H axis: 9 shots total drive; Counter spindle sep. Drive • RAPP 8-fold; Total drive 3 tools IK • Workpiece deflection unit with linear gripper • Coolant supply 3 bar • Coolant supply 8 bar • Hinge belt chip conveyor, discharge height 1000mm • Glass scale X-axis turret top/bottom • Compact belt filter for cooling lubricant: filter fineness approx. 30-40 μm • Bar loading magazine FMB LSK 38, for rods 3.2 m (original price at that time 340.000,- €uro)

CNC controller: Mitsubishi M-720BM (MAPPS 2) Capacity X-axis travel mm: 260 Z-axis travel mm: 520 C-axis: 360º (0.001°) Turning length mm: 515 Max. turning diameter mm: ø: Ø356 Upper turret Tool holder: 12 Main spindle Speed spindle rpm: 5000 Drive power spindle kW: 15/11 Spindle bore mm: 73 Manufacturer: KITAGAWA Counter spindle Counter spindle travel mm: 525 Equipment Chip conveyor Signal lamp Tool measuring arm Workarea light Working time hours Under power: 7.456 Cutting Time: 5.423 Basic machine dimensions / weight Length mm: 3.495 Width mm: 2.050 Height mm: 2.230 Weight kg: 5.800

Make MBO. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

dimensions of saw-band: 3650x27x0,9 mm speed: 15/100 m/min capacity 90 degrees: round: 280 mm capacity 90 degrees: square: 260 mm capacity 90 degrees: flat: 330x260 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: square: 250 mm capacity 45 degrees: flat: 270x200 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170x170 mm total power requirement: 2,2 kW vice: 340 mm weight: 1240 kg dimensions: 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows CE based MEP-50 controller and 7 touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings, Single stroke 6 ...