automatic grinding machine used for sale

clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Capsuling Machine GAI 4264D The GAI 4264D is a reliable, second hand capsuling solution engineered for precise application of capsules on glass bottles in demanding beverage production environments. Operating at up to 3000 bottles per hour with 4 dedicated heads, this model is well suited for wineries, breweries, distilleries, and diversified industrial packaging lines seeking to enhance presentation and product security. With format compatibility from 0.06 L miniatures to standard 0.75 L bottles, it integrates seamlessly into a used bottling line alongside rinsing, filling, capping, and labeling equipment. Technical Specifications & Performance Data Optimized for continuous operation, the GAI 4264D offers stable output and repeatable capsule placement for premium appearance and brand consistency. Manufacturer: GAI Model: 4264D Year of manufacture: 1996 Category: Capsuling machine O ...

Used capping machine Clean Pack up to 2500 bph Machine Specifications Firstly, the CLEAN PACK brand capper features a single-head configuration, specifically designed for applying T-caps. Importantly, this technical choice allows for precise cap placement, which is essential for ensuring the integrity of the bottled product. Moreover, the cap distribution system operates through vibration mechanisms, an effective method for sorting and feeding caps to the capping device without interruptions. Speed Adjustment of the Used capping machine Clean Pack up to 2500 bph Secondly, the production speed of the capper is adjustable via an inverter. This allows fine control of the capping rate, tailored to the desired production rhythm. Consequently, this adjustment capability proves particularly useful in dynamic production environments, where requirements can quickly change. Configuration and Safet ...

DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz

Key data: 400 mm, 250 mm

This machine is sold on behalf of the customer. Technical data: Manufacturer: Spinner Type: TC300-52 SMMCY Year of Make: 2010 Control: Siemens 840D SL Travel: X1 180 mm X2 110 mm Z 450 mm Y +40/-40 mm Turning length: 400 mm Turning diameter: 250/200 mm Swing diameter: 400 mm Working Spindle 1 Speed: 5,000 rpm Torque: 96/121 Nm Power: 15/19 kW Bar Passage: 52 mm Working spindle 2 Speed: 7,000 rpm Torque: 38 Nm Power: 6 kW Tool turret 1 and 2 Number of stations: 12x Recording: VDI 25 Max. speed AGW: 6,000 rpm Power: 8/2.6 kW Dimensions and weight Dimensions: 2,200 x 2,000 x 2,000 mm Weight: approx. 4,600 kg Condition Condition: Used Other equipment and accessories included: Parts Conveyor Belt High Pressure Pump Chip conveyor Interface for bar feeders 3-jaw chuck on sub-spindle and main spindle

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

RSA NC-V 2000 Deburring Machine + Pipe Washer + Coral Filter Complete industrial tube processing and post-treatment line The plant consists of three high-quality industrial components: 1. RSA RASAPLAN NC-V 2000 – High-performance deburring machine Function: Automatically processes workpiece lengths up to max. 2,000 mm. 2. BOUS (CeBeCo) Rowamat RL 200 – Continuous pipe washing system Function: Extremely robust and durable stainless steel welded construction. Accessories: 3. CORAL IperJet DF4 – Cartridge Filter Extraction System Power: 4 horizontal high-performance filter cartridges with fully automatic Jet-Pulse compressed air cleaning (very low-maintenance). Function: Reliably extracts brush dust, sanding residues or fumes from the car wash. The RSA Rasaplan NC-V2000 is a fully automatic, high-performance brush deburring machine that has been special ...

Pago Labeling Machine

Jac Bread Slicer Gate Gate machine Cutting width: 10mm Manual operation 400V 50Hz Height: 110cm Width: 60cm Depth: 80cm

KD sheet metal cleaning machine Type: KD Plaster for 2-edge sheets double brush Restitution Emergency Stop Switch Stainless steel cladding on rolls

Year of construction/overhaul: 2000/2022 Complete mechanical/electrical overhaul (SPS 7): 2022 Technical documentation: available Machine dimensions (LxWxH): 2.5 x 1.8 x 2.2 m Weight: 2500 kg The unscrewer was operated without technical problems until 04.2026. The dismantling was then carried out by qualified personnel. Working direction: right-left Transport height: min 740 mm Capacity: 25,000 bottles/hour Drive motor machine: Bevel gear motor 2.2 kW 240/400 V 50 Hz Drive motor height adjustment: Worm gear motor 0.37 kW 240/400 V 50 Hz Drive motor blower: three-phase motor 1.5 kW 240/400 V 50 Hz Bottle dimensions:Bottle diameter max.100 mm min.40 mm Bottle height: max. 350mm min. 150 mm Pneumatic system: nominal width 4 Nominal pressure 6.3 bar Pneumatic cylinders: Belt Tension Diameter 40 Column Tension Diameter 100 Extensive ...

Availability: immediately Type: 90 Machine dimensions (LxWxH): 2.5 x 2.5 x 2.2 m Weight: 4000 kg Technical documentation: available Fully Automatic Labeling Machine Krones Prontomatic BR720-12-480-6-4-180 Type 90: Capacity: 16,000 bottles/h Bottle No. 1: 1.0 l VDF bottle Diameter: 89.5 mm Height: 306.5 mm Body label: 120 x 98 mm Adhesive height: 27 mm Chest label: 92.5 x 44 mm Adhesive height: 183 mm Back label: 75 x 90 mm Adhesive height: 27 mm Bottle No. 2: 0.7 l VDF bottle Diameter: 77.5 mm Height: 286.5 mm Body label: 120 x 98 mm Adhesive height: 30 mm Brood label: 82.5 x 44 mm Adhesive height: 172 mm Back label: 75 x 90 mm Adhesive height: 30 mm The machine was operated without technical problems until 04.2026. The dismantling was then carried out by specialist personnel - Prontomatic 720-12-480-6-4-180 - left-right - Steel glue roller - Neck ...

Rösen & Robbert Bread Slicer Type: Spa Bayern analog control Cutting width adjustable from: 3 – 15mm for cutting round and elongated breads with lubrication system can be driven on castors External dimensions width 104cm depth: 75cm height:107cm

Caprigiani Pastochef Ice Cream Maker Stainless steel with agitator and cooling Unfortunately strong signs of use Net price. Plus VAT ex stock

Offer via gebr. Pipe cutting and chamfering machine Fabr. GF Type GF20 AVM with lifting table Specifications: Pipe outer diameter 283-508mm Wall thickness 1 - 15mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 50 - 163 rpm. Speed levels electronic 1 - 6 Power 1800 W

x-travel: 0 mm y-travel: 0 mm workpiece height: mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: 0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgDirect measuring systemDirect path measuring systemCabineFull protection cabinChip removalChip removal: manual, from the chip troughCoolant supplyCoolant supply: Multi-jet strip at spindle head, switchable from coolant to air (max. 6 bar / 90 psi, 6 water jets, 6 air jets) Pump capacity: 70 l/min / 18 gallon/min (theoretical pump performanc ...

Offer via Gebr. Tube cutting machine Fabr. GF GEORG FISCHER Type RA12 Specifications: Pipe outer diameter 215-325mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed Speed levels electronic 1 - 6 Power 1600 W used, in good condition.

Arburg 520C-2000-675 (154) without funnel General information Item number: 154 Availability: In stock Year of construction: 1998 Brand: Arburg Specifications Spray weight: 240 g Clamping force: 2,000 kN Screw diameter: 45 mm Spray pressure: 2500 bar Spar spacing: 520 x 520 mm Clamping plate size: 715 x 715 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 126766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Euromap: Yes Air valve: Yes

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 NC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning operation: 780 rpm integrated balancing sensor Pallet changer for 2 palletsType of Measuring system Direct measuring systemTable surface Ø 800 x 630 mmCentre bore 50 mmMaximum load (table centre) 1400 Kg4. Axes (swivelling range) 360 x 0,00 ...

sheet thickness: 1.25 mm steel Roller center distance: 63 mm

Manufacturer TRUMPF Type L 3030 Year of construction 2005 Working range 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840D Laser power 2,700 watts Accuracy +/- 0.1 mm Equipment: Rotolas Closed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Control Siemens: Open PC-based controller, simple operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam photoelectric sensors, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin DIAS height control Automatic focus position adjustment AutoLas Plus Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, visit by appointment. Errors in the technical data and pri ...

Unused Turbovac Dip Tank - TV40/60 with air dryer The Turbovac dip tank and drying units offer you the ideal solution to complement your packaging line. Compared to vacuum pack / vacuum bags only. The Turbovac dip tank offers wrinkle-free transparency and significantly better product presentation. This is done by using heat and water to shrink the extra bag surrounding your product. Adding a drying unit will improve your packaging line and make it easier to label your product. Both machine types are designed to be integrated into the control of a vacuum packaging machine or alternatively they can operate independently. Manufacturer: Turbovac / Henkovac Type: TV40/60 Year: 2017, unused Material: Stainless steel Chassis dimensions (LXS) 570x400mm Immersion length 300 mm The maximum height of the product is 250mm Maximum water volume 70 liters Maximum product weight 20 ...

Diosna Wendelkneter Type: W120 Carousel 4 stainless steel boilers with lifting tipper with control cabinet Carousel Painted

MAX DIAMETER 750,MAX MODULE 10

This Krauss Maffei 200-1000 C2 was manufactured in 2006. A hydraulic injection moulding machine featuring a tie bar distance of 560 x 560 mm and an opening stroke of 700 mm. It includes a screw diameter of 55 mm and is equipped with 1 core valve, 3 air valves, and an EU 12 connector for robot integration. A solid choice for expanding production capabilities. For more information about this hydraulic injection moulding machine, please reach out to us.

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

Ingersoll F55 Horizontal Gantry Milling Machine Manufacturer: Ingersoll Type: Gantry / Portal Milling Machine Control: Conventional Year of Manufacture: 1978 Retrofit: 2008 Main Specifications: Spindle motor power: 55 kW Longitudinal X-axis travel: 11,470 mm Transversal Y-axis travel: 2,500 mm Ram vertical W-axis stroke: 700 mm Crossbeam vertical Z-axis stroke: 2,000 mm Table dimensions: 10,750 × 2,000 mm Maximum table load capacity: 200 tons Maximum spindle speed: 6,000 rpm Feed rates: X-axis: 2,500 mm/min Y-axis: 2,000 mm/min Ram vertical feed: 900 mm/min Tool change: Manual The machine is suitable for machining large and heavy components for industries such as power generation, heavy machinery, shipbuilding, and general engineering.

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

W&P Batch Kneader Type: UC 80 A with stainless steel boiler Stainless steel spiral Flour dust cover 2x automatic timers 2x speeds for max. 120 kg dough

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

Machine vice, sturdy vice, drill press vice -Machine vice: Clamping jaws 125 x 34 mm -Clamping depth: 98 mm -Dimensions: 365/125/H70 mm -Weight: 15.7 kg

Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

Machine vice, sturdy vice, drill press vice -Machine vice: CEKABA-BON clamping jaws 125 x 40 mm -Clamping depth: 130 mm -Dimensions: 440/210/H90 mm -Weight: 14.4 kg

custome made napkin making machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

emco VMC 300 D - CNC milling machine - SIEMENS Sinumerik 810D CNC control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant device - 41300 Hours - Year of construction 2004 Technical data Working Range: - Carriage path longitudinal X: 420 mm - Carriage path transverse Y: 330 mm - Usable slide path vertical Z: 240 mm - Workpiece dimensions LxWxH: 400 x 300 x 190 mm - Spindle nose/table surface distance: 210 - 450 mm Milling Table: - Clamping surface LxW: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% ED): 9 / 11 kW - Speed range (infinitely adjustable): 0 - 5000 rpm - Sound level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Cutting performance: - Milling capacity in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling capacity in steel:  ...

Giana lathe mod. GFP14 - 710x 5300 - year 2007, control FAGOR GFP14

CNC lathe Gildemeister Twin 42 RG2 Year of Make: 2004 Control Siemens 840D Powerline Turning diameter 145 mm Max. bar passage 45 mm Spindle Head Flat Flange 120 h5 Chuck 130 / 140 mm Main spindle speed 20–7,000 min⁻¹ Main spindle power 28 / 22 kW (40/100 % ED) Torque main spindle 180 / 140 Nm Sub-spindle Yes, same performance X-axis 220 mm Z-axis 320 mm Y-axis ±30 mm Rapid traverse X/Y/Z 30 / 15 / 30 m/min Turret 2 × 12 stations Tool holder VDI 25 Machine weight approx. 5,300 kg Connected load approx. 40 kVA Type 60° inclined bed, linear guides Chip conveyor Bürener type SPE 63/30- 250 Z60 Tool monitoring system Artis type CTM Tailstock mounted on sub-spindle carriage, tailstock stroke = 230mm Tailstock force = 300 daN Centrifuge MK3 Overload clutch for the X and Z axes of slides 1 and 2 Bar machining package consisting of: Workpiece collection device  ...

This 3-axis SPINNER TC 52 MC was manufactured in 2007. It features a robust design with optional equipment including a bar feeder, parts catcher, and a turret with driven tools. The machine is equipped with a collet chuck for clamping and a dust extraction system for efficient operation. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 52 MC horizontal turning machine we have for sale. Contact us for further details.

Fully functioning mobile X-ray system. Very good condition.

This 4-axis HAAS ST-15Y was manufactured in 2022. It features a maximum spindle speed of 4000 rpm and a spindle power of 14.9 kW. The machine has a workpiece diameter over the bed of 419 mm and a maximum cutting length of 406 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15Y horizontal turning machine we have for sale. Contact us for further details.

Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details.

Vertical injection moulding machine manufactured in 1998. This Arburg 1200 TS 800-60-350 features a clamping force of 800 kN and includes two injection units: a vertical unit with a Ø22 mm screw and a horizontal unit with a Ø35 mm screw. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 1200 TS 800-60-350 machine we have for sale. Contact us for further details.

Kronen S021 vegetable cutting machine Serial: 021-016 2014 Stainless, The vegetable cutting machine S021 is perfectly suited for cutting decorative spirals of vegetables (e.g. carrots, potatoes, pumpkins, radishes, celeriac, beetroots, zucchinis, etc.) very quickly and simply. By means of variable tools a multitude of spiral thicknesses (e.g. 2 x 2 mm, 2 x 8 mm, 2 x 10 mm - other versions on request) can be produced with a max. product length of 250 mm."

This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details.

This 5-axis TORNOS Swiss DT 26 S was manufactured in 2022. It features a maximum bar capacity of 25.4 mm and a main spindle speed of 10,000 rpm. The machine includes a total tool capacity of up to 22 tools and live tool positions of up to 8. If you are looking to get high-quality turning capabilities, consider the TORNOS Swiss DT 26 S swiss type turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2013. This Leadwell T-7 features a maximum turning diameter of 350 mm and a maximum turning length of 540 mm. It includes a 12-station hydraulic turret and a spindle speed of 1,750 rpm. If you are looking to get high-quality turning capabilities, consider the Leadwell T-7 machine we have for sale. Contact us for further details.

Eillert C25 H Potato rumbler Serial: 4149308 Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph

12fill VMP semi auto filling machine semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal