auto parts used for sale

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03611 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Path): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz- The

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNAVibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHType SRC-B200-2RBeauguration: approx. 2000Pot diameter top: 300 mmPot diameter bottom: 180 mmPot inner height: approx. 45 mmSorting lane width: approx. 5 mmTotal height (drive + pot with sorting track): 260 mmPower supply: 230 volts, 50 Hz.- RNA control device, type ESG 90 for Adjustable

STOCK Laminating machine, Max. sheet size. 1420x1620mm, Min. sheet size: 500 x 500 mm, · with MIRUS sheet feeder, type HSII, · Suction belt carrier sheet feeder, type 4R, · Press belt, type 5, · Package turner (forks) with non-stop device, type 8, · Stacker with non-stop roller carpet, type 7, Technical specifications:, Working width: 1500 mm, Max. sheet width: 1420 mm, Max. arc length: 1640 mm, Lamination tolerances: +/- 1.5 mm, Material thickness:, - Carrier material from 0.6 - 7 mm. Single-sided corrugated cardboard only runs through the machine with a standing wave., - For cardboard of approx. 400 – 500 g/m² an additional needle bar is required., - Cover sheet of approx. 180 – 400 g/m². Deviations possible depending on material properties.

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

JONAB automation for planing line, Consisting of:, - Tilt hoist, - Cross chain with transport belt, - Cross chain with separation, - Infeed roller conveyor

cutting diameter: 240 mm dimensions of saw-band: 2730 x 27 x 0,9 mm table height: 920 mm cutting speed: 35 + 70 m/min : 240 mm stroke back stop: 230 mm cross-slide: 270x230 : 210 Impact energy: 200 Air consume per blow: 200x210 : 130 mm : 130 mm : 130x160 mm total power requirement: 1,2 kW weight of the machine ca.: 0,26 t dimensions of the machine ca.: 0,9 x 1,6 x 1,74 m • miter left 60° • Quick-release vise with quick-release device a. • Quick release lever for easy handling • Frame and gear made from one piece, very quiet cut and very low vibration • Electrical monitoring of band tension and band breakage, saw band cover. • Carbide saw band guide • Large machine bed • Machine base (disassembled) with automatic cooling The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic saw frame lowering via the hydraulic Cylinder, ...

cutting diameter: 225 mm dimensions of saw-band: 2480 x 27 x 0,9 mm table height: 935 mm cutting speed: 45 + 90 m/min : 225 mm : 145 mm : 90 mm : 150 x 245 mm : 190 x 150 mm capacity 60 degrees: flat: 120 x 90 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 1380 x 580 x 930 mm - With an output of 1100 watts, the device is ideal for processing hard types of metal. - Thanks to the emergency stop and automatic switch-off, you can work safely - The low-noise electric motor ensures a quiet working atmosphere - Comfortable buttons guarantee pleasant operation of the device. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350 x 200 saw band length: 3375 x 27 x 0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,61 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 35 + 70 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m SPECIAL PRICE! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR The dat ...

cutting diameter: 240 mm saw band length: 2730 mm cutting width: 270 mm cutting speed: 37 + 74 m/min dimensions of saw-band: 2730 x 27 x 0,90 mm : 240 mm : 230 mm : 270 x 230 mm : 210 mm : 200 mm : 200 x 210 mm : 130 mm : 130 mm : 130 x 160 mm total power requirement: 1,2 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution High-quality processed and equipped metal band saw for saw cuts best quality For sawing solid material and profiles made of steel, stainless steel and aluminium Miter cuts up to 60 degrees left Saw band speed adjustable in 2 stages Frame and gearbox made from one piece, very quiet and low-vibration cut Easy, clear miter adjustment with scale Quick release vice with  ...

cutting diameter: 280 mm saw band length: 3370 mm cutting width: 350 mm dimensions of saw-band: 3370 x 27 x 0,9 mm : 280 mm : 250 mm : 350 x 200 mm : 240 mm : 220 mm : 230 x 220 mm : 170 mm : 150 mm : 170 x 100 mm saw tape speed: 37 + 74 m/min total power requirement: 1,8 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,5 x 1,7 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 255 mm saw band length: 2765 x 27 x 0,9 mm table height: 950 mm : 18-110 m/min : 255 mm capacity 90 degrees: square: 240 mm capacity 90 degrees: flat: 300 x 180 mm capacity 45 degrees: round: 210 mm capacity 45 degrees: square: 190 mm capacity 45 degrees: flat: 200 x 160 mm capacity 60 degrees: round: 135 mm capacity 60 degrees: square: 110 mm capacity 60 degrees: flat: 130 x 100 mm capacity 45 degrees: round: rechts 180 mm capacity 45 degrees: square: rechts 160 mm capacity 45 degrees: flat: rechts 180 x 100 mm : 1,5/1,8 kW : 350 kg : 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system  ...

weight max.: 1200 kg workpiece diameter: 20 - 800 mm total power requirement: 0,75 kW traversing speed: 80 - 1600 mm/min weight of the machine ca.: 56 kg range L-W-H: 520 x 470 x 390 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 46 °, 3 mm, 1 mm

MARTIN T74 Automatic sliding table saw with 4-axis CNC control -Paratable integrated as 5th axis in the control and 3-axis scoring Mark: MARTIN Type: T74 AUTOMATIC - Radio Control Year of Make: 2008 M-No.: V484794 Table dimensions: 1,350 x 1500 mm. with table extension 600400 mm with tool storage Table height: 900mm Edging table: 3,300mm Main saw: 5.5 kW Saw blade shaft: ø 30 mm. with two drive pins 10 mm Saw blade change: "ProLock" quick-change system Saw blades: Ø 250 - 500 mm; up to Ø400 mm retractable under table; up to Ø400 mm can be combined with scoring Cutting height: CNC control up to max. 170 mm. (saw blade 500 mm) Saw blade swivel: CNC control 0 - 46° Cutting width: CNC control 1,350 mm Scoring machine: 3-axis controlled scoring machine Rip Fence: CNC Control Rip Fence; End position can be lowered automatically below table level Parallelogramtic:  ...

A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.

1.0 pcs IML Brewing System with Removal Unit, Stacking Unit and with IML Vision Inspection System for 4-Compartment Cavities Tool Manufacturer: Beck Automation AG Type: B4 Year of Make: 2019

Removal system for lid to capsule 16-fold Abstract: The lids are removed from the open mold with the removal arm. The injected products are removed from the ejector side. On the removal arm, the presence of the parts is controlled. Once the unloading arm has reached its end position, the lid with a vertical servo axis into the waiting box, As soon as the box is full (counting the lids), the box is transported outside and the next empty box is pulled in. Specifications: Product Type: Round Lid Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 Cycle time of the IML system: 5 s

1.0 pcs IML Brothers - System with Removal Unit, Placement on Conveyor Belt for horizontal stacking injection mould 32 - cavities Manufacturer: Beck Automation AG Type: B32 Year of Make: 2019

BCS Autobox 2600 + Multicut 3, Year 2017,, Max.Sheet width: 2600 mm, Auto set slotting tools, Auto set Creasing tools, Autoset. Tool less size change, Feeder with capacity 300 mm height of blanks, Typical set-time of 1 minute, High speed up to 100m/min, Over 50 Fefco box styles possible, Bmjpclzewxl, Handles singe to double wall corrugated board (max. 10 mm), Touch Screen Control panel for easy programming of new or stored box size and styles

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

Key data: 5300 mm, 2200 mm

Striebig Automatic 6220AV Panel Saw Brand: Striebig Type: Automatic 6220AV Year of Make: 1985 M-No.: 14118 Max. cutting height: 2,100 mm Max. cutting length: 5,300 mm Max. cutting depth: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm Motor power: 4.4/5.5 KW Saw blade speed: 4,750 rpm Bottom support: Rollers Small parts edition: Yes Measuring system: analog Swivel saw unit: manual Saw feed: manual Mounting: freestanding with rear stand Extraction: ø100 mm Saw bar locking: manual Dimensions: 6.5 x 2.5 x 1.3 m

Full automatic bandsaw with bundle clamp and autofeed CNC controlled angle positioning workpiece width in bundle clamping: 0-300 mm workpiece height in bundle clamping: 5-300 mm single material feed length: 0-600 mm repeated material feed length: 0-9999 mm maximum cutting capacity (90°, round): 325 mm maximum cutting capacity (90°, rectangle): 500 x 300 mm right mitre cut (45°, round): 300 mm right mitre cut (45°, rectangle): 300 x 300 mm right mitre cut (30°, round): 200 mm right mitre cut (30°, rectangle): 200 x 200 mm left mitre cut (45°, round): 300 mm left mitre cut (45°, rectangle): 300 x 300 mm Depth of throat: 500 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4400 x 34 x 1.1 mm Length : 2680 mm Depth : 2350 mm Height: 1350 mm Weight: 1800 kg

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen  ...

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...

Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110 Year 2009 - Serial-No. 23343509 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hour Top Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Registration Accuracy Up to 0,2mm (0,008”) Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size (widthxlength) 2050mm x 460mm - weight 2800kgs

Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used

Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible.

Key data: 850 mm, 6000 mm

Stock number: 3989 CNC LATHE Manufacturer: GURUTZPE, Type: AUTO M-S CNC 6000 mm Machines NO.: AM-52.8035, Year of manufacture: 2002 Specifications: Max. circumferential diameter 850 mm dia. Turning length 6000 mm Turning over planing slides 500 mm dia. Main motor power 22/28 Kw - 415 V kw Spindle bore 260 mm dia. Control Fagor 8055 FL - TC Fabr. Accessories: Chip conveyance.

Pneumatic diverter, electric, as good as new

X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

cutting diameter: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 150 x 150 mm capacity 45 degrees: flat: 150 x 210 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: flat: 90 x 100 mm dimensions of saw-band: 2455 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: ca. 900 mm total power requirement: 1,2 kW weight: 240 kg range L-W-H: 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating i ...

cutting diameter: 250 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 290 x 210 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 210 x 200 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: square: 130 x 130 mm capacity 60 degrees: flat: 140 x 130 mm dimensions of saw-band: 2965 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: 940 mm total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 290 kg. range L-W-H: 1250 x 1500 x 1700 mm Equipment: - compact / robust manual band saw (INDUSTRY) for sawing solid material and profiles - ball bearing support table for miter cuts left 60° to right 45° durable + easy miter adjustment - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manually adjustable qu ...

Siphon / Bottle / Party Keg Filler 1 digit GTH 0.5 to 3 liter bottles + 5L party kegs 30 containers/h Dependent on the operator Semi-automatic Year of construction 2025

Machine de mesure tridimensionnelle Marque Renault SEIV type portique CNC Dimensions : 2000 x 1500 mm Courses en X : 1480 mm Courses en Y : 1180. mm Courses en Z. : 890 mm Elle est composée d'une table n marbre , de 3 liaisons glissières , d'un pupitre de commande , d'une commande numérique et d'un palpeur .

Used Autojet RAPID 3002 cartoning machine. New 2019. The Rapid 3002 is a semi-automatic machine for packing sachets into cartons. The maximum capacity of the machine is 180 pieces/min. The device consists of a main machine and feed conveyors. The main machine consists of a receiving and grouping chain, a scraper actuator with a tilting scraper, a lifting table with pressure actuators, a pusher, and a carton nozzle.

WEIGHING COFFEE BEANS OR GROUND COFFEE FROM 100 G TO 2000 G - REVISION MACHINE

Mefiag Satilum filter system Long Life Unit 3x with control system

Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Connection 400V, 16A-CEE connector Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning

Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Dough divider with 3 new knitting plates Connection 400V, 16A-CEE plug Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning

URBAN AMS 6010 very good condition fully operational

Clamp length: - mm Clamp width: - mm 0: - Nm Glass bead nailer 2 P Jumbo automatic E.C. - new - Your advantages: - The corner connections are closed - No open glazing bead joints - There are no color differences when painting - The glazing bead frames are easy to assign Clamp corner joining machine 2P Jumbo Automatic E.C. for clamping glazing bead frames. Choice between automatic and manual operation, With angle system, clamping device from above and front Pressure can be regulated separately. Inserting parallel and superimposed ones Clamps possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot valve. -------------------------------------- Price in this version on request! Plus packaging/shipping Additional prices: --------------------- Movable work table height adjustable from 700 - 1000 mm, 2 pieces of support bars can be plugg ...

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

General SKU394U1135 LocationBarneveld CEcheck MakeBHS Sonthofen TypeAP500/14/24 Dimensions Cake capacity50 Pressure Working pressure0.08 Bar Main Features MaterialStainless steel Pressure0.08 Bar Vacuumcheck Surface4.8 m2 Specified Features - Filterpress Filter presscheck Filter surface4,8 m² Stainless steel platescheck Recessed chamber platescheck Number of platens14 Internal platen sizesdia. 500 mm Platen thickness12 mm Frame thickness23 mm Cake capacity35-50Ltr. Hydraulic closingcheck With hydraulic unitcheck Motor3kW, 400/690Volt, 965 rpm(ex) MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) With jacketcheck General No.F-02575-305-01 Year of construction2014 Floorspace2,4x1,7 m Total height2,90 m Weight4750 kg ATEX designedcheck Extra Specificationshousing data:Volume: 3000Ltr.temperature: 0-200°Cpressure: -0.08bar/+0.08bart ...

General SKU437W1431 LocationBarneveld CEcheck MakeH.E.L. Main Features MaterialGlass Specified Features - Miscellaneous MaterialBorosilicate Glass 3.3 Capacity-40°C to +200°C Motor230 volt Capacity4 x 100 ml Information TypePoly-block Mach.No.E1039S Year of construction2011 Floor space0,30x0,50 m Total height0,50 m Weight50 kg Extra SpecificationsCompact automated parallel synthesis platform, 4 reaction zones independent agitation control, 250 to 1500 rpm with parts MiscellaneousHELMiscellaneous > MiscellaneousBrand > HEL What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

It is a used, reconditioned Fortuna bun press fully automatic for sale. The machine head can be swivelled electrically and switched off with active movement. Weight range of the machine is 40gr. - 110gr. per piece of dough (30 pieces). Incl. 3 x plates (more plates on request). Price on request.

System Description Partial automated sorting system for returnable beverage crates and EPS foldable trays. Incoming returnable containers arrive mainly on Euro and half pallets and must be manually unloaded due to mixed crate types. Additional quantities arrive in roll containers. Main Functions - Identification and sorting of various returnable crate types - Deposit value calculation per crate based on pallet barcode - Sorting of bottles into 20-unit and 24-unit module crates - Automatic unpacking of EPS trays with bottles using Inlet systems - Handling of up to 440 crate types - Sorting of standing bottles inside EPS trays with Inlets - Allocation of sorted crates for automated palletizing or manual handling Capacity and Performance - Total annual throughput: 6.5 million crates - Operation: 2 shifts per day, 5 days per week - Average throughput: 1,625 crates per hour - Peak throug ...

Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment.

It comes with 3 capsule size format sets 0 / 2 / 4 The machine originates from a prominent pharmaceutical & cosmetic production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Automatic, intermittent motion used capsule filler in Pharma grade Stainless Steel. Working Description: Suitable for small to medium production runs, with mechanical output up to 40,000 capsules per hour: For filling powders, pellets and tablets (incl. various possible combinations between powder, micro tablet and pellets). The dosing / filling stations (dosators) are vacuum assisted, which increases the filling accuracy, allows for handling powders with difficult flow characteristics and - improves compaction of powder • CE marked. • Capability to fill a wide range of powders. •  ...