auto packing used for sale

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 35 + 70 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m SPECIAL PRICE! -Miter cuts up to 60° left -Cutting speed 35 / 70 m / min. - Vice with quick release device -Carbide saw band guide -Tape tension control -Electr. automatic cooling Auto-Cut-System = 3 step system -Automatic saw frame lowering via the hydraulic cylinder -Infinitely adjustable feed -with limit switch - rapid lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed -Manual mode Share of freight costs 85 EUR The dat ...

A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.

1.0 pcs IML Brewing System with Removal Unit, Stacking Unit and with IML Vision Inspection System for 4-Compartment Cavities Tool Manufacturer: Beck Automation AG Type: B4 Year of Make: 2019

Removal system for lid to capsule 16-fold Abstract: The lids are removed from the open mold with the removal arm. The injected products are removed from the ejector side. On the removal arm, the presence of the parts is controlled. Once the unloading arm has reached its end position, the lid with a vertical servo axis into the waiting box, As soon as the box is full (counting the lids), the box is transported outside and the next empty box is pulled in. Specifications: Product Type: Round Lid Dimensions: DN 50 mm Height: 6 mm Number of cavities: 16 Cycle time of the IML system: 5 s

1.0 pcs IML Brothers - System with Removal Unit, Placement on Conveyor Belt for horizontal stacking injection mould 32 - cavities Manufacturer: Beck Automation AG Type: B32 Year of Make: 2019

BCS Autobox 2600 + Multicut 3, Year 2017,, Max.Sheet width: 2600 mm, Auto set slotting tools, Auto set Creasing tools, Autoset. Tool less size change, Feeder with capacity 300 mm height of blanks, Typical set-time of 1 minute, High speed up to 100m/min, Over 50 Fefco box styles possible, Bmjpclzewxl, Handles singe to double wall corrugated board (max. 10 mm), Touch Screen Control panel for easy programming of new or stored box size and styles

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 80 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, Bale size LxWxH 1.100x720 mm (adjustable length), feeding hopper size : 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 5-7 Ton/h, - with 50 kg/m3 materials 9-11 Ton/h, - with 120 kg/m3 materials 17-19 Ton/h, 5 vertical-wire binding, Cycle with no material, no twisting : 25 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, oil tank capacity 950 lt., Machine weight ca.25.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic binding, Fully automatic with adjustable parameters on touch screen  ...

Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110 Year 2009 - Serial-No. 23343509 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hour Top Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Registration Accuracy Up to 0,2mm (0,008”) Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size (widthxlength) 2050mm x 460mm - weight 2800kgs

AUTOMATIC VERTICAL BINDING BALER, for FILM, WOVEN PP, PET, RIGID AND SOFT PLASTICS, PAPER, CARDBOARD and more, 100 Tons ca. pressing force, 45 kw drive, complete with oil heating and cooling systems, proportional pressure flow controller, adjustable channel pressure, Bale size LxWxH 1.100x720 mm (adjustable length), Filling hopper size 1.100 x 1.600 mm., Average throughput rate, - with 30 kg/m3 materials 6-8 Ton/h, - with 50 kg/m3 materials 10-12 Ton/h, - with 120 kg/m3 materials 18-20 Ton/h, 5 vertical-wire binding, upper and lower photocells to control material feeding feeding, Cycle with no material, no twisting : 22 ca, Pre-press flap with 2 x 20 Ton force, Exchangeable bottom plate in hardox in channel and chamber, Baler weight ca.27.000 kg., General features, common to all balers:, Construction ìn sturdy carbon steel with top EU components., Compact and easy to use, Automatic bind ...

Hydraulic self-centering steady rest, luenette, Lynette SMW AUTOBLOKHydraulic steady rest with hydrostatic bearingSuitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 NSpanning range: 8 to 70 mmOperating pressure: approx. 60 barBezel foot: 245 x 240 mmDesign: fixed- 3 pieces roller bearing 35 mm- Roller width 18 mm- hydraulically self-centeringDimensions L x W x H: 350 x 250 x 550 mmWeight: 65 kgGood condition; used

Two automatic flat glass sandblasting systems MHG are available. 1) MHG Glastmaster 1500 Automatic, year of manufacture: 1999, blasting height: 1500mm, max. glass thickness: 70mm, blasting capacity: 30m²/h, air consumption per nozzle at 4bar: 800l/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/1100mm, weight: approx. 2000kg, control: Siemens PLC. 2) Sandblasting system without nameplate, machine dimensions X/Y/Z: approx. 3200mm/2600mm/1100mm, weight: approx. 1500kg. An on-site inspection is possible.

Pneumatic diverter, electric, as good as new

X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power.

cutting diameter: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 150 x 150 mm capacity 45 degrees: flat: 150 x 210 mm capacity 60 degrees: round: 90,0 mm capacity 60 degrees: square: 90 x 90 mm capacity 60 degrees: flat: 90 x 100 mm dimensions of saw-band: 2455 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: ca. 900 mm total power requirement: 1,2 kW weight: 240 kg range L-W-H: 870 x 1550 x 1740 mm Equipment: - compact / robust manual band saw (HOBBY / INDUSTRY) for sawing solid material and profiles - miter cuts up to 60° left possible - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manual quick-release vice, including quick-release lever - machine base - coolant system - operating i ...

cutting diameter: 250 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 290 x 210 mm capacity 45 degrees: round: 220 mm capacity 45 degrees: square: 200 x 200 mm capacity 45 degrees: flat: 210 x 200 mm capacity 60 degrees: round: 140 mm capacity 60 degrees: square: 130 x 130 mm capacity 60 degrees: flat: 140 x 130 mm dimensions of saw-band: 2965 x 27 x 0,9 mm cutting speed: 35 + 70 m/min work height max.: 940 mm total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 290 kg. range L-W-H: 1250 x 1500 x 1700 mm Equipment: - compact / robust manual band saw (INDUSTRY) for sawing solid material and profiles - ball bearing support table for miter cuts left 60° to right 45° durable + easy miter adjustment - 2x selectable cutting speeds (37 + 74 m/min.) - continuously adjustable saw frame feed - automatic shutdown at the end of the cut - manually adjustable qu ...

Siphon / Bottle / Party Keg Filler 1 digit GTH 0.5 to 3 liter bottles + 5L party kegs 30 containers/h Dependent on the operator Semi-automatic Year of construction 2025

Machine de mesure tridimensionnelle Marque Renault SEIV type portique CNC Dimensions : 2000 x 1500 mm Courses en X : 1480 mm Courses en Y : 1180. mm Courses en Z. : 890 mm Elle est composée d'une table n marbre , de 3 liaisons glissières , d'un pupitre de commande , d'une commande numérique et d'un palpeur .

Used Autojet RAPID 3002 cartoning machine. New 2019. The Rapid 3002 is a semi-automatic machine for packing sachets into cartons. The maximum capacity of the machine is 180 pieces/min. The device consists of a main machine and feed conveyors. The main machine consists of a receiving and grouping chain, a scraper actuator with a tilting scraper, a lifting table with pressure actuators, a pusher, and a carton nozzle.

WEIGHING COFFEE BEANS OR GROUND COFFEE FROM 100 G TO 2000 G - REVISION MACHINE

Mefiag Satilum filter system Long Life Unit 3x with control system

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1

An Atlas Copco piston compressor is available. Motor power: 4kW, max. operating pressure: 11bar, intake capacity: approx. 633l/min, delivery rate at 7bar: approx. 412l/min, speed: 1000rpm, tank capacity: 270l. Machine dimensions: approx. 1500mm/500mm/1200mm, weight: approx. 125kg. Documentation available. On-site inspection possible.

General SKU394U1135 MakeBHS Sonthofen LocationBarneveld CEcheck TypeAP500/14/24 Dimensions Cake capacity50 Pressure Working pressure0.08 Bar Main Features MaterialStainless steel Pressure0.08 Bar Vacuumcheck Surface4.8 m2 Specified Features - Filterpress Filter presscheck Filter surface4,8 m² Stainless steel platescheck Recessed chamber platescheck Number of platens14 Internal platen sizesdia. 500 mm Platen thickness12 mm Frame thickness23 mm Cake capacity35-50Ltr. Hydraulic closingcheck With hydraulic unitcheck Motor3kW, 400/690Volt, 965 rpm(ex) MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General No.F-02575-305-01 Year of construction2014 Floorspace2,4x1,7 m Total height2,90 m Weight4750 kg ATEX designedcheck Extra Specificationshousing data:Volume: 3000Ltr.temperature: 0-200°Cpressure: -0.08bar/+0.08bartest pressure: 0.10 ...

General SKU437W1431 LocationBarneveld CEcheck MakeH.E.L. Main Features MaterialGlass Specified Features - Miscellaneous Capacity-40°C to +200°C Motor230 volt Capacity4 x 100 ml MaterialBorosilicate Glass 3.3 General TypePoly-block Mach.No.E1039S Year of construction2011 Floor space0,30x0,50 m Total height0,50 m Weight50 kg Extra SpecificationsCompact automated parallel synthesis platform, 4 reaction zonesindependent agitation control, 250 to 1500 rpmwith partsFine chemicalsStarchMiscellaneousOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicTea, herbs & co ...

Offered are 2 fully automatic stand-alone stencil printers for SMD assembly technology, PCB assembly year 2010. Fully automatic vision system, Linux-based operating software, double loading system, motorized table drive, large printing area X/Y 440mm/440mm, frame size X/Y max. 670mm/700mm, PCB thickness max. 6mm, cycle time approx. 18-25 sec., product changeover time < 5 min., squeegee pressure 4-24kg programmable, snap-off/separation speed programmable, compressed air supply 6bar approx. 60l/min., dimensions X/Y/Z 2080mm/1130mm/1450mm, signal tower 2000mm, weight approx. 285kg. Inspection possible by appointment.

General SKU401X1198 MakeLytzen LocationBarneveld CEcheck TypeLDF-1760 Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume1820 Ltr. Pressure1 Bar Specified Features - Autoclave Horizontal autoclave(Dry Heat Sterilizer) Notified bodyLytzen A/S, Denmark Capacitymax. ± 1820 Ltr. Internal width1000 mm Internal depth1400 mm Internal height1300 mm Inlet/Outlet1300 x 1400 mm Max. temperature150 °C Electric heatedcheck Electric capacity30 kW Insulatedcheck MaterialStainless steel 1.4301 (304) General No.A20191064 Year of construction2020 Mounted on stainless st. framecheck With switchcheck With switchgear(as is) Floorspace1,6 x 1,4 m Total height2,3 m Weight1400 kg Extra SpecificationsRecirculation fan motor: 3.0 kWOverpressure fan motor: 0.16 kWCooling method: air cooling through exhaust air exchange when the damper is open.HEPA filter ...

It is a used, reconditioned Fortuna bun press fully automatic for sale. The machine head can be swivelled electrically and switched off with active movement. Weight range of the machine is 40gr. - 110gr. per piece of dough (30 pieces). Incl. 3 x plates (more plates on request). Price on request.

It comes with 3 capsule size format sets 0 / 2 / 4 The machine originates from a prominent pharmaceutical & cosmetic production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Automatic, intermittent motion used capsule filler in Pharma grade Stainless Steel. Working Description: Suitable for small to medium production runs, with mechanical output up to 40,000 capsules per hour: For filling powders, pellets and tablets (incl. various possible combinations between powder, micro tablet and pellets). The dosing / filling stations (dosators) are vacuum assisted, which increases the filling accuracy, allows for handling powders with difficult flow characteristics and - improves compaction of powder • CE marked. • Capability to fill a wide range of powders. •  ...

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Aluminum chass ...

WSM SZ-250K Feeder The WSM SZ-250K is a feeding device from WSM-Automation, which has been specially developed for applications with high cleanliness requirements. The "k" in the type designation stands for "short" and refers to the shortened length of the sorting coil, which reduces the formation of abrasion due to level and vibrations. Function: It is a feeding device that combines the advantages of spiral conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimise contamination caused by abrasion. Scope of application: It is used where high cleanliness is needed during feeding to ensure a clean screw connection. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with fill level control and dirt brake Spiral conveyor WFL 200 IU (200 mm) with separator Plexiglass enc ...

used fat baking appliance Habersang Primus 5/E automatic, checked and tested, internal dimensions 185 cm wide, 79 cm deep, for approx. 96 pastries, control Siemens S590U, Ser. no. 84710/001150, 9 kW, 380 V, 50 Hz

Originates from a prominent pharmaceutical production site in Europe and it is in excellent overall condition - well looked after and serviced on regular basis. Working Description: Automatic Push-O / Press-On 3-head capper suitable for plug caps (please see photos) with an output up to 90 caps per minute (depending on cap type and bottle being processed). Stainless steel fully guarded construction, lastly used with jars of 29.5mm DIA and with caps at 19mm DIA (12.5mm neck) + 16mm cap height + 11.6mm cap height. Stainless steel construction 720mm DIA rotary cap sorter with Perspex cover and lid. Comes with two additional sets of format parts including star wheel and guides. Suitable for Pharmaceutical, Cosmetics, Nutrition, Contract Manufacturing, Food, Medical Devices, Chemical and others. Technical Information: Size (machine): L: 3000m ...

Dimensions (L/W/H): 7600x1400x1800 mm Weight: 2950 kg Total power requirement: 9,15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3960x1400x1800 mm Weight: 1200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 8,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6000x1400x1800 mm Weight: 2500 kg total power requirement: 8,05 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3120x1100x1600 mm Weight: 2000 kg Total power requirement: 6,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1400x1800 mm Weight: 2200 kg total power requirement: 9,15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4600x1000x1550 mm Weight: 2500 kg Total power requirement: 6,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU266U444 MakeMatachana LocationBarneveld Type211L1 Pressure Working pressure3 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume276 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Autoclave Horizontal autoclavecheck Capacity276 Ltr. Internal width458 mm Internal depth955 mm Internal height458 mm Inlet/Outlet458x458 mm With trayscheck Tray sizes360x935 mm Electric heatedcheck Insulatedcheck With vacuum pumpLohe 25003 Motor1,1kW, 220/380Volt With pumpPrisma 154 Motor0,7kW, 230/400Volt, 2800rpm With transport trolleycheck With timercheck MaterialStainless steel 1.4404 (316L) General No.5546 Year of construction1995 With switchcheck Floorspace1,28x0,78 m Total height1,97 m Weight760 kg Extra SpecificationsSteamboiler type K91, volume 36,5 l. 330 KPa, 5000 cm2, 30 kW, chamber type 211L1, volume 276 l.Fine chemicalsBiotech ...

For sale are autobag bags in the following sizes 150x250 1.5 Million Bags 200x320. 2.5 million bags Price Euro Palette 1 Pallet 0,02€ x Bag 2 Pallet 0,019€ x Bag 3 Pallet 0,018€ x Bag 4 Pallet 0,017€ x Bag 5 Pallet 0,016€ x Bag and so on 10 and more 0.01€ Bag 1 million Autobag bags from 0,01€ piece

A bread roll machine TWA Erika is available. Dough system range: 750g-2550g, product weight range: 20g-85g, machine dimensions X/Y/Z: approx. 700mm/600mm/1700mm. Including three rounding plates. An on-site inspection is possible.

All-Fill Series 200 Twin Head Automatic Filling machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 25425 Technical data - Motorized upper roller 175 x 30 mm - Continuous lower rollers 250 x 50 mm - Upper roller can be delivered by handwheel - Top roller diameter 175 mm - Lower roller diameter 250 mm each - Projection 1100 mm - Distance base plate – lower roller 1520 mm - Drive 400 V - Space requirement approx. W 900 x H 2650 x D 2000 mm - Weight approx. 1500 kg

The Automatic Liquid Filling and Capping Machine by YQ MACHINERY CO LIMITED offers an inline solution for efficient packaging. Designed for easy operation and reliability, this machine is perfect for businesses in the material handling and packing industries, ensuring accurate filling and capping of liquid products. Where It’s Used: Beverage industry (bottled water, soda) Pharmaceuticals (medicine bottles) CBD/hemp oil bottling Cosmetics (shampoo, lotion bottles) Vape e-liquid production

GKS CP350 Automatic Food Packaging Machine (Vacuum seal Robot) A brand-new, unused, unopened and undamaged item in original retail packaging. Features: Automatic Power Source Electric Material Stainless Steel Food Compatibility Multifunctional Item Depth 1.205m Colour Blue Brand GKS Type Vacuum Sealer Voltage 240 V Item Height 1.67m Model CP350 Country/Region of Manufacture Germany Components Included Roll, Film Bag Item Width 962mm Power 1200 W

General SKU354T964 MakeSteriflow Thermal Processing TypeSteriflow 1311 EAT No.S3200 Year of construction2006 LocationBarneveld Pressure Working pressure5 Bar Main Features MaterialStainless steel Volume2150 Ltr. Pressure5 Bar Specified Features - Autoclave Horizontal autoclavecheck Capacity2150 Ltr. Internal diameter1300 mm Internal depth1600 mm Inlet/Outlet160/130 mm With trayscheck Tray sizes470x430x45 mm Max. temperature150 °C Insulatedcheck With pumpcheck Motor4 kW With transport trolleycheck MaterialStainless steel 1.4301 (304) General Mounted on stainless st. framecheck With switchgear(as is) Floorspace2,03x3,45 m Total height4,15 m Weight2500 kg CEcheck Extra SpecificationsWith:- Horizontal tank, volume: 1700 liters- Centrifugal pump- 2x heat exchangersSample trolley with-&:nbsp: 5 trays (440 x 480 mm) 25 positions 60 x 60 mm- 8 trays&:nbsp: (44 ...