auctions used for sale

Peiseler EW 1000 reversible clamp Manufacturer: Peiseler Type: Reversible clamp Type EW 1000 Year of construction 1971 Face plate D = 1000 mm Clamping table 2500x500 mm Voltage 220 / 380 V Power 3.5 kW Item condition: used, impeccably and top maintained. Action components: Only the Peiseler EW 1000 reversible clamp, without the Webo BR 35 V / 1250 radial drilling machine, this can be purchased individually or as a combined offer in our other auctions. Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.

I sell here several machines, equipment, forklifts, work platforms, spare parts for forklifts and work platforms and spare parts and accessories for woodworking, so be sure to pay attention to my other auctions Trailer work platform Trailer work platform Telescopic lift lift DENKA Type: DL21 Year of construction: 2000 Payload 200 kg Platform dimensions approx. 1.0 x 0.7 m Transport dimensions approx. 8.2 x 2.46 x 1.8 m Weight approx. 2500 Kg Working height approx. 21.3 m Platform height approx. 19.3 m Range approx. 9 m (center basket/ 80Kg) hydraulic shunting drive (mobile from the basket) automatic cable reel Support can be operated from the basket TÜV: 08/2024 UVV: 08/2023 Extensive overhaul work was carried out on the stage: - Paint renewed. - Hoses renewed. - new batteries - all oils changed. - new test book issued ...

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Injection moulding machine Demag Ergotech 25/280-35 Parameters: Production year: 2006 Injection unit: .../35 Screw diameter: 18 mm Specific injection pressure: 2099 bar Injection weight: 20 g Pump motor power: 7.5 kW Cylinder heating band power: 5 kW Tool closure system: 250/... Clamping force: 25 t Tool plate dimensions: 460 x 450 mm Distance between columns: 280 x 280 mm Ejector stroke: 100 mm General data: Weight: 2520 kg Dimensions (m) LxWxH: 3,3 x 1,2 x 2,0 m Net price given. We invite you to our other auctions where you will find other peripherals and injection machines. europnet.eu

I sell here several machines, equipment, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts. Therefore, be sure to check out my other auctions Sliding table saw, table saw, circular saw, carpenter's circular saw, format saw ROBLAND Type: Z320 Alu format slide 320 cm Boom table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cut to length up to approx. 285cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence up to 130cm 3 different speeds adjustable (4000/ 5000/ 6000rpm) Motor power main engine 5.5 KW Motor power scoring 0.55 KW Prior viewing is expressly desired, just leave your phone number by e-mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The machines can be picked ...

I sell here several machines, equipment forklifts, work platforms, spare parts for forklift work platforms and for woodworking, so be sure to pay attention to my other auctions Forklift Electric Forklift Three-wheel forklift LINDEN Type: E18 Year of construction: approx. 1994 Battery from 2019 According to the counter approx. 11600h Load capacity: 1800 kg at 500mm centre of gravity Lifting height approx. : 410 cm Construction height approx.: 255 cm Construction width approx.: 115 cm Fork length approx.: 115 cm Incl. side shift Incl. charger ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The machines can be picked up by the buyer or shipped by a forwarding agent at the ...

I sell several machines, equipment here. spare parts, etc. for woodworking, Forklifts, work platforms as well as accessories and spare parts for forklifts and work platforms. Therefore, be sure to check out my other auctions Briquette press briquetting press chip press Pressing unit without control WEIMA TYPE: TH50 Briquette diameter approx. 50 mm Motor power hydraulics 5.5 KW They only bid on the briquette unit incl. hydraulic power unit. there is no control. I still have a control for briquette press with LOGO module. This can be purchased at an additional cost. The power unit could not be tested. Will be sold as it says here. ( See pictures ACTUAL - condition) Prior viewing is expressly desired, just leave phone no. by mail, then I will get back to you for a viewing appointment. Subject to prior sale, all information is subject to change. The ma ...

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 270S 350-60 Clamping force: 35 t Production year: 1999 Injection weight: 17 (PS) g Injection unit: .../60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Injection weight: 17 (PS) g L/D ratio of screw: 24.5 Tool closure system: 350/... Clamping force: 35 t Distance between columns: 270 x 270 mm Ejector force: 30 kN Opening distance: 350 mm Maximum plate distance: 525mm Ejector stroke: 220 mm General data: Total installed power: 12.6 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other periphera ...

We offer for sale: Pallet racking system, new Make: STOW Year of construction: 2023 Material: 120 pitches 1 base field and 9 cultivation fields 11 frames approx. 5,500 x 1,100 mm 60 trusses approx. 2,700 x K125 mm 120 locking pins 22 Ground anchors, new The permissible shelf load is 2,800 kg with evenly distributed load) 933 kg per pallet! Trusses are secured with locking pins and are adjustable in a 50 mm increment. Plug-in system - easy installation! The frames are pre-assembled, ready for assembly. If you need shelves in other designs, please contact us. We offer a comprehensive range of new and used shelves and accessories and are happy to assist you with your planning. Please also take a look at our other auctions in the field of storage technology in our shop. Dispatch: Cheap shipping with inexpensive forwarding possible. Pleas ...

We are a company dealing with international trade in used injection molding machines and peripherals. We specialize in the transport of machines up to 4500t clamping force and the relocation of industrial plants throughout Europe. Offered: Arburg Allrounder 220S 150-60 Clamping force: 15 t Production year: 1999 Injection weight: 14 (PS) g Injection unit: .../60 Screw diameter: 15 mm Specific injection pressure: 2330 bar Injection volume: 15 ccm Injection weight: 14 (PS) g Pump motor power: 5.5 kW Tool closure system: 150/... Clamping force: 15 t Distance between columns: 220 x 220 mm Opening distance: 275 mm Maximum plate distance: 425mm General data: Total installed power: 11 kW Oil tank capacity: 120 l Net price given. We invite you to our other auctions europnet.olx.pl, where you will find other peripherals and injection machines. www.europnet.eu

4. Mobile SAW Tractor unit OERLIKON Source STAMIC 1303 DC - cabel array with sealed multipin connector on tractor for better handling and shipping of unconnected machine - Controlbox SUBARC 3 - Tracor MEGATRAC 6 with Laser and Flux Reusing unit by nozzle controll unit for real welding speed externally - machine comes with OEM manual and literature You find further listed equipment for welding in additional auctions (doens not belong to this auction): 1. 1 SAW Tandem Welding Boom - Oerlikon UP Tandem Column And Boom fitted for 2 times 3,2mm wire Welding Column for Submerged Arc Welding SAW Tandem submerged arc welding Manufacturer: Welding System: Oerlikon / AirLiquide MFT 70X60 SO, built 2011 used until 2014 Column: Uniweld DIMENSIONS: high 8m; reach 6 m; dolly 3,7 m x 3,6 m Tandem Submerged Arc Welding - Starmatic 1303 DC - Starmatic 1003 AC/DC - Contro ...