arm used for sale

material width: 200 mm coil weight: 1,5 t material thickness: 0,8 - 4,2 mm straightening roll diameter: 80 mm Number of straightening rolls: 7 Pcs. Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5

bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,7 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Excavator includes banana shovel and ditch cleaning bucket. It also has a joint on the front excavator arm to rotate the bucket separately from the arm.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 36800 € : 747.04 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, b ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 35000 € : 710.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : 155 ° : 110 mm : 0,75+1,1 kW : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the ...

Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...

5 Sormac peelers available, available Q2 2024, Onion peeler USM-S100, The Sormac onion peeler USM-S100 combines easy operator use with a good reliability. The operator has within reach a rotating, mounted display panel with all the important functions at there disposal. Also shown is important information like capacity, number of peeled onions, operating hours and malfunction identification.By means of a singulating chain the onions are transported from the infeed hopper and positioned onto the flights of the transport chain. The operator places the onions in the right horizontal position. The rotating knives top, tail and cutting arms make a horizontal cut around the onions., At the end of the conveying section the onions are picked up with a double holding-arm system with rotating holders., This arm is fitted on a rotating structure. During the rotating movement the onion spins around  ...

Key data: 25 kp, 600 , 200

Rated power at 50%ED: 25kVA Short circuit current: 14kA Electrode force: 220daN Projection: 600mm Arm spacing, stepless: 168-443mm Electrode cone: A3 / 1:10=18 --- Welding control: CS 2 (5-times, 1-program) --- Incl. additional options: -Foot switch - Tubular arm, cone A3 straight -Main switch - 3m connection cable and Cekon plug 32A --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

2007 V105 model with up-down accelerator mat for introduction Speed: up to 45 cps per minute depending on format 4 formats available (supplied with the machine): format changes in about 15/20 minutes Large capacity flat case storage magazine Cartoner feed trough conveyor adjustable in spacing according to the dimensions of the products to be placed in the case Motorization of all movements by brushless motors (3 motors) Case pick-up by suction cup arms and volumizing on a chain with adjustable cleats according to case format. Mechanical introduction by synchronized arm with no product / no box system Mechanical bonding (glue tank) Command control on operator panel with touch screen mounted on swivel arm Display of faults and cause of stoppage in French

Description: 24 uprights, upright height approx. 4100 mm, upright spacing approx. 1000 mm, 107 arms length 2100 mm, max. arm load 900 kg, max. upright load 5089 kg, 146 arms length 1400 mm, arm load 600 kg, upright load 5089 kg Approx. Onsite Dimension. (l x w x h): 13,000 x 2,400 x 1,500 mm, weight approx.: 9,000 kg

: neu : ca. 8 Wochen ab Auftragse : Deutschland : 4144 € : 3000 mm : 820 - 940 mm : 300 kg/m : 350 mm : 63 x 3 mm : 15 mm : 2550 mm : 250 mm digital readout adjustment by handwheel pneum. brake material depth stop with 12 times ball bearings on generous large dimensioned guiding profile FURTHER LENGTHS: 2 meter € 3.434,- 4 meter € 4.833,- OPTIONS: Measuring systm with 1/10 mm readout Z 58 with magnetic polring and sensorhead SZ 09 € 823,- material depth stop arm sprung and adjustabel up to the mechanical zero (man. dischargeable by eccentric lever SZ 05 € 493,- pneum. arm retraction (10 mm discharge stroke) of sprungmaterial depth stop (SZ 05) SZ 07 € 412,- cover plate between the carrier rollers, galvanized per running meter SZ 06 € 114,- FURTHER LENGTHS AND ROLL WIDTHS ON REQUES. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

Pressure plate stacker Grafoteam PST 26 C; arm length 650mm; suitable for Heidelberg Suprasetter A52-74; optionally with stop interface for Heidelberg Suprasetter A52-74. Plate stacker Grafoteam PST 26 C; arm lenght 650mm; used for Heidelberg Suprasetter A52-74; for option with stop-interface for Heidelberg Suprasetter A52-74.

Description: Color: white (Fresh paint) Cable length: 7 mtr Hours: 32400 Construction year controller: 2010 Year of Robot arm construction: 2008 Controller: Control: KRC2 ED05 Software version: 5.6.8 Weight: 210 Kg Length: 53 cm Width: 81 cm Height: 125 cm  , Robot arm: Weight: 665 Kg Length: 113 cm Width: 130 cm Height: 180 cm Approx. Onsite Dimension. (l x w x h): 1,600 x 2,000 x 2,000 mm, weight approx.: 875 kg

CNC Machining Center Scheer Type: BC 2001 Year of construction: 2000 Axle travel: X 3500 mm, Y 1500 mm, Z 220 mm Axis speeds: X 80 m/min., Y 60 m/min., Z 30 m/min. Work table size: 3200 x 1200 mm Minimum part size: 250 mm x 70 mm x 10 mm Max. part size: 3200 mm x 1250 mm x 70 mm In pendulum mode: 800 mm x 1250 mm complete machining 1000 mm x 1250 mm surface processing Vacuum pump 2 x 40 m³/h Vacuum cups 12 pieces 120 x 120, 2 pieces 120 x 65 mm Drilling unit: L-shape, 13 individually controllable spindles, 7 in X-direction, 6 in Y-direction, 32 mm wheelbase, Extension stroke 70 mm, pneumatic Scheer male thread M 10 re+li, 1.5 kW / 6000 rpm Milling unit power 7.5 kW at 12000 to 18000 rpm, Speed 1000 rpm to 20000 rpm electr.adjustable Right-left rotation Hollow shank taper DIN 69893-HSK F63 Tool magazine on the move with 18 places Distance in magazine 88 mm Max.  ...

Description: Vacuum traverse length max. 2400 mm, width approx. 800 mm, arm length approx. 5800 mm, column height approx. 4000 mm, arm capacity approx. 300 kg Approx. Onsite Dimension. (l x w x h): 6,500 x 1,200 x 1,000 mm, weight approx.: 600 kg

Barbaric Vacuum Lifter System (complete) Brand: Barbaric Type: B1 UW H K 250V 2015 Year of construction: 2015 Scope of delivery: stand, rotatable crane arm, electric chain lifter, compressed air vacuum with operation Lifting Capacity: 250 KG Horizontal Stand: 4.3 m (2.7 m vacuum lifter) Arm: 5 m length, 270° rotation circle Operation: Vacuum: Lift: Suction cups: 2 vacuum cups, width adjustable Condition: Complete and functional tested

Rhinoceros XN10s Windstorm with swivel arm mini excavator new with no reserve price!As can be seen in the pictures, this offer includes the mechanical quick coupler, hydraulic grab and standard bucket 40cm!Year of construction 12/2023Operating hours less than 1 hourSerial number: 23F120989XN10s with swivel arm (kinkmatic)Easier access to engine components thanks to the hinged engine compartment lid -> maintenance-friendly access!Brand name RhinoOperating weight 840KgCE ISO certification1 year guarantee on all spare partsHydraulic cylinder BOHAIHydraulic pump brand KDKTAIGFENG hydraulic valve brandEngine brand KOOP Euro V 1 cyl. Air cooled 9.52hpMain pump CBK-F6.8SJ-TECH swivel motorEATON traction motorXN10s technical data:Chassis width 0.92mGround clearance of the upper chassis mm 453Counterweight turning radius mm 660Chain width mm 180Transport length mm 2850Seat height to the floor mm  ...

Rhinoceros XN10s Windstorm with swivel arm mini excavator new with no reserve price!As can be seen in the pictures, this offer includes the mechanical quick coupler, hydraulic grab and standard bucket 40cm!Year of construction 12/2023Operating hours less than 1 hourSerial number: 23F120995XN10s with swivel arm (kinkmatic)Easier access to engine components thanks to the hinged engine compartment lid -> maintenance-friendly access!Brand name RhinoOperating weight 840KgCE ISO certification1 year guarantee on all spare partsHydraulic cylinder BOHAIHydraulic pump brand KDKTAIGFENG hydraulic valve brandEngine brand KOOP Euro V 1 cyl. Air cooled 9.52hpMain pump CBK-F6.8SJ-TECH swivel motorEATON traction motorXN10s technical data:Chassis width 0.92mGround clearance of the upper chassis mm 453Counterweight turning radius mm 660Chain width mm 180Transport length mm 2850Seat height to the floor mm  ...

new CNC Nestingmachine, Brand: INFOTEC Type: 4621 EVO GO Technical data: Working range X axis: 2150 mm working range Y axis: 4600 mm Working range Z axis: 250 mm X / Y axes speed: 60 m/min Z axis speed: 12m/min Drill head grid 32 12 vertical spindles 8 horizontal spindles 1,7 kW System INFOTEC - EVO GO Automation of horizontal drilling in 18 mm panels (patent pending) Lateral drilling zone (requires drilling unit 12/8/2 LL) - Special unit for the C axis, which allows the transfer of the cut workpieces to the drilling zone. Can be rotated 0-90 degrees. (C-axis required) Optional: - Extension of the working area in the Y-axis up to 4600 mm. (Total length of the machine set with unloading table for EVO GO is: 9100mm). - Lateral drilling range: X: 2150 mm, Y:1300 mm Dimensions of side drilling elements: - 1600 x 600 x 18 mm - maximum, - 500 x 80 x 18 m ...

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

Description: Individual dimensions  ,2700 x ,800 x 3000 mm Cantilever arm length 500 mm Upright load 2000 kg Upright profile ,IPE 140 Cantilever arm type Medium 70 MM Without visible content Approx. Onsite Dimension. (l x w x h): 1,000 x 3,000 x 1,500 mm, weight approx.: 1,300 kg

:VL 700A | VL 1100A | VL 1100D x-travel:700|1100|1100 mm y-travel:420|600|600 mm z-travel:500|600|600 mm table-size:800x420|1280x600|1280x600 mm max. table load:500|1000|1000 kg distance spindle center to column:480|630|630 mm distance spindle center to table:100-600|100-700|60-660 mm rapid traverse in x-y-z axis:40/40/32|36/36/30|36/36/30 m milling feed range:1-10.000 mm/min :10.000|10.000|6000 1/min (direkt) spindle drive:11/16,5|11/20,4 kW positioning accuracy:+/- 0,010 mm repeating accuracy:+/- 0,008 mm tool taper:40|40|50 BT/SK max. tool diameter:80/130|80/130|110/220 mm max. tool weight:8|8|20 kg max. tool length:300|300|350 mm dimensions:4215x3230x2700|4200x3510x2850|4200x3510x2850 mm weight of the machine ca.:4,5|7,25|7,5 t CNC controls from:Fanuc tool measuring system:von BLUM workpiece measurement system:von BLUM Brand-new CNC vertical machining center with CNC control Siemens ...

:VL 1400 | VL 1600 x-travel:1.400|1.600 mm y-travel:760 mm z-travel:760 mm table-size:1.600x760|1800x760 mm max. table load:1.200|1.500 kg T-slot (width-distance-quantity):18x125x5 mm distance spindle center to column:780 mm distance spindle center to table:150-910 (opt.100-860) mm rapid traverse in x-y-z axis:20/20/20 m milling feed range:1-10.000 mm/min :10.000 (opt. 6000) 1/min spindle drive:11/20,4 (opt. 15/20,4) kW positioning accuracy:+/- 0,012 mm repeating accuracy:+/- 0,010 mm tool taper:40 (opt. 50) SK/BT max. tool weight:8 (opt. 20) kg tool length:300 (opt. 350) mm Tool diameter:80/150 (opt. 110/200 (angrenzend leer)) mm dimensions:4500x4300x3350 mm weight of the machine ca.:12|13,5 t total power requirement:40 kVA CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:Blum workpiece measurement system:Blum Brand-new CNC vertical machining center with CNC control Sie ...

sheet width:3100 mm plate thickness:6 mm distance between columns:3100 mm no. of strokes:16 - 24 Hub/min cutting angle:0,5 - 1,5 ° down holder:14 Stk. throat:350 mm table height:900 mm oil volume:150 l total power requirement:11 kW weight of the machine ca.:7060 kg dimensions of the machine ca.:4100 x 2200 x 2190 mm 1 brandnew hydraulic shear ERMAK CNC HVR 3100-134 with following equipment: - CNC controlled hydraulic blade gap adjustment system - CNC controlled cutting angle adjustment system - portable foot pedal - CNC controlled motorized backgauge system - front support arms with t-slot, ruler and flip stop - squaring arm - scales with metric and inches - cutting line illumination and shadow line - emergency stops - swing up backgauge - central lubrication system - front finger protection - rear sliding plates - front sliding plates with ball bearing on the table - 350 mm throat dept ...

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

The Enduro is a joint development of BÖWE SYSTEC and BÖWE BELL + HOWELL, combining proven technologies from both parts of the company: intelligent control and operation as well as modular input components on the one hand, and the proven gripping arm technology, on the other hand. With up to 11,000 envelopings per hour, the Enduro is used in the medium power segment. A wide range of applications, the convenient operation and easy accessibility of all modules are the highlights of the system. This covers the entire processing spectrum from classic invoicing to a wide range of advertising broadcasts. With the COMPACT, BÖWE SYSTEC offers a space-saving, solid yet versatile enveloping system in the performance class up to 7,200 envelons per hour, which can be tailored to a wide range of requirements. Thus, it is equally suitable as an entry-level model for daily post- ...

Type: VGL 5000. Double-current mixer in standard steel version with 5,000 l. useful content, cylindrical mixing tank and conical bottom, with vertical middle screw, distribution arm and power line controller, rectangular connector for pocket filter, manhole, lower Screw bearing with air flushing, pneumatic flat slider at the outlet.

Type: VGL 5000. Dual-flow mixer in carbon steel design with 5.000 l. net capacity, cylindrical mixing container with conical bottom, with vertical center screw, divider arm and flow disc, rectangular connection for pocket filter, manhole, lower screw bearing with air flushing device, pneumatic flat valve at output.

1 Piece of cantilever / heavy load shelving system PK (double-sided) top state (from hot rolled steel profiles) ABM.ca.: L. 2,600 mm (2 fields with 1,250 mm axis) T. 2 x 750 mm useful depth (+ 200 mm support) H 2.250 mm > per stand 4 piece arms one above the other > Adjustable grid 100:100 mm, screw > 5 Storage level incl. foot stabilizer > Load / arm / storage level = 450 / 1,350 kg > Rack load = provided 1,800 kg each always evenly distributed load > Rack section, IPE 200 / arms IPE 80 (incl. deflector, Rolling backup optional plugin) > Color: RAL 5010 (gentian blue), connector + diagonal cross galvanized As offer single-sided shelf 1.795,-price + VAT factory Gärtringen / plus freight

We offer spare parts from uring spending randen JCB telehandler 540-70. Axles, transmission, hydraulic cylinder, arm, cab, carrier, frame Type: 540-70 Year of construction: 2003 Price upon request

The basic unit includes following modules (standard equipment): ï?  Compact and stable design in modular design ï?  All feeding systems that ensure an optimal product handling, are adaptable ï?  Control Panel with 4-zeiliger plain text display for the following: piece counter. Speedometer, hour meter, temperature monitoring, General Fault indicator ï?  Wear-free, infinitely adjustable, patented tension system ï?  Wear arm seal system by steel seal bars with more accurate Temperature monitoring ï?  Mechanical locking of the clamping bar, this precise slide clamp and sealing ï?  Product protection by security monitoring via light barriers in the Clamping range ï?  Switching and Pneumatics Cabinet integrated into the machine ï?  maintenance-free and oil-free operation Technical data: ï?  Control right ï?  Control Panel of Lauer PCS (standard)  ...

Technical data: - max. workpiece height 245 mm - min. workpiece height 50 mm - max. workpiece width 250 mm - min. workpiece width 50 mm - working height 900 mm sawing unit - motor 7.5 kW - speed 2900 rpm. - Cutting height 145 mm (170),(245) - Suction nozzle - saw blade FI 400 mm (450),(600),(750) Horizontal/vertical milling unit - 2 vertical spindles 2 x 7.5 kW - 2 horizontal spindles 2 x 7,5 kW - spindle FI 40 mm - speed of spindles 2850 rpm - max. tool FI 180, 230, 270 (330) mm - swivel-on protective arm - suction nozzle FI 200 mm drilling unit - motor 1.8 kW - Speed 1450 rpm. - Drill FI 12 - 35 mm - Drill length 220 - 320 mm - suction nozzle FI 150 mm forehead groove milling unit - motor 4.0 kW - spindle speed 2900 rpm - max. tool FI 230 mm - spindle FI 30 mm - suction nozzle FI 150 mm Inclusive - pneumatic tensioner - roller table and right - 1700 kg weight

type mechanic: KR150-2 type Control: KRC1 max. load: 150 kg workingrange: 2400 mms repeat accuracy: +/-0.2 mm net weight: 11200 kg It is possible to mount an arm-extension => max. load: 120 kg / workingrange: 2800 mms very good state, functional checked.

C - arm SIEMENS Siremobil 2000 Digital image storage, dual monitor

OHRA Kragarmregal NEW Negotiation price: € 1,760,-- net They offer on a shelf with a length of 4.5 m, consisting of: 4 stand with foot, 4 m high + 3 adjustable booms per stand (120 cm), load capacity 1100 kg/boom. Diagonal struts, stiffening and distances are included. Frame spacing 150 cm Arm length / boom 120 cm Load capacity 1100 kg / boom Load capacity per stand per side 3500 kg Over 100 meters available Heights of 2.5 m, 4 m or 6 m are available. Other compilations on request.

- Capacity 10,000 litres - Stainless steel container V2A - Gearbox new product - Swivel arm made of standard steel New product - Container made of stainless steel V2A new product - Mixing screw stainless steel V2A new product - Pneumatically driven new product - Drive motors 11 kW & 1.0 kW new product

Ruhle Tumbler MKR 130, with vacuum, scraping arm, container size 130 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, all stainless steel. The machine is currently in the refurbishing and will be available soon. It can be tested in Koblenz, Germany.

Surgical image intensifier (C - arm) Ziehm Exposcop 8000 with dual monitor. Digital multiple image memory, Sony video printer in good condition

Rühle Tumbler MKR 600, with vacuum, scraping arm, container size 600 liters, LED control, direct cooling by strong cooling unit, mixing and kneading, up to 25 rounds per minute, all stainless steel, with loading device, comfortable emptying of the goods by standard carriage size, refurbished. The machine is currently in the overhaul and can be tested in Koblenz, Germany.

Laboratory Candy pulling machine Application Sugar Pulling, Available 1 Kg, 2Kg & 5 Kg up to 50 Kg, the size of the engine is dependent on the size of the machine The action of the machine is derived from two driven arms rotating independently around a single fixed arm. The machine has one speed and pulling time can be set by means of a timer. The teflon arms are removable. This option is unique to this machine. It allows an easy cleaning. Safety guard automatic stopping with motor and starter Sugar Pulling Machine is mainly to aerated products like Chewy Toffees and others. This machine just stretch the gelatine based sugar mass and work air inside the batch. That avoid stickiness of the chewy Toffee at the teeth and give the product a spongee texture. The Machine is made for Laboratory trials and works batchwise, the product touching parts are made from stainless steel or te ...

Continuous power: 200 kVA / 160 kW Diesel engine: MTU 6R183TA32 No. 447.902-400-050611 Cylinders: number 6 Cooling: liquid-cooled Builder: A.v.. Kaick, DSG 43L 1/4 No. 6414047 Voltage: 400V / 231 V Frequency: 50 Hz Speed: 1500 rpm Type: Mobile complete unit in sound insulation capsule on two-axle trailers with 2-circuit brake system Accessories: Electrical cable reels in weather protection box below the chassis, spare wheel with swivel arm and bracket Tank: 1000 l Switchgear / Starter: automatic switchgear, Deif BGC 0108 for parallel operation Battery voltage / capacity: 24V Dimensions (L X W X H): 7700 x 2200 x 3000

Technical data: -Weight of coil: to 3. -Strip width: 600 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. Coil outer diameter. 1500 mm

Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm

Lithotripter Wolf Piezolith 3000 Table Ultrasound C-arm X-ray Calibrate tools Manuals

Stock# UG6234 Very little used high shear mixer/granulator made by Lodige (Germany) model MGTL 10. Machine is designed in stainless steel. Interchangeable cylindrical vessel with a total capacity of 10 liters and a working volume ranging from 25% to 70% of the volume of mixing chamber. Mixer equipped with a three-arm mixing impeller bottom driven by el. motor with the power 2.7 kW, 3000 rpm, and side entry chopper driven by el. motor 0.42 kW, 3000 rpm. The speed of the agitators is fully adjustable. Includes additional tulip type agitator, a spray nozzle and Watson Marlow peristaltic pump with adjustable speed in the range from 3 to 400 rpm and the capacity of about 5.7 to 760 ml / min. Mixer passed the FAT (Factory Acceptance Test) and the qualification according to the GMP (Good Manufacturing Practice) guidelines. Unit includes full technical documentation and spare parts. New in 20 ...

Several used robots Brand: KUKA Type: KR 150L150SP/2 Year of construction: 2000 Hours of operation: approx. 700 Nominal / load capacity: 150 kg Additional load at rated load: 80 kg Maximum total load: 230 kg Arm length: 1200 mm Max range: 2610 mm Repeatability: +/-0.2 mm Engine power: 19.8 kW Working volume: 51 m³ Weight: 1135 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The pictured robot  ...

Several used robots Brand: KUKA Type: KR 200L 120/2 Year of construction: 2000 Hours of operation: approx. 800 Nominal / load capacity: 120 kg Additional load at rated load: 80 kg Maximum total load: 200 kg Arm length: 1400 mm Max range: 2810 mm Repeatability: +/-0.3 mm Engine power: 19.8 kW Working volume: approx. 65 m ³ Weight: 1140 kg Accessories: -Control hardware and software -Handheld -Connection cable Usage possibilities: -Spot welding -Manage -Mount -Application of adhesives, sealants and preservatives -Edit: milling, drilling, grinding, brushing, polishing... -MIG/MAG welding -YAG-laser welding -Waterjet cutting On request at an additional cost: -Training, programming, commissioning ex works (without customer-specific applications). -Programming and commissioning with customer-specific application -Paint in color of your choice The picture ...

Capacity: 8,000 litres water filling Volume: approx. 7,000 litres Bulk density: max. 0, 6 kg / litre Maximum filling: 4200 kg •Bowl, cover, swivel arm, mixing screw, spout housing made of V2A Traverse from mild steel, is covered but to the tank interior with a V2A plate. -All lubricants are H1 & halal approved and certified ATEX Zone 21 Consideration and introduction of the ATEX zoning 21 within the mixer. -Infrarot sensor Temperature monitoring tips storage with PT 100 Dampers manhole Explosion protection document Monitoring unit with temperature display