2689 offers arm

maximum number of results exceeded > 1000
please refine your search

Category: 106: presses
New in: used
Price: 3.200 €
Location: Land-de DE 33335 Gütersloh, Anemonenweg 8
Seller: Venker Werkzeugmaschinen GmbH

Hydropneumatic way of working Profile height: max to 160 mm Punching pressure: 35 kN at 6 bar Rebuttal hub: 100 mm Punching stroke: 20 mm Recharge arms More punching knives on request Weight: About 350 kg

Category: 1605: compressed air accessories
New in: 2017
Price: 1.800 
Location: Land-d D
Seller: BOGE KOMPRESSOREN Otto Boge GmbH & Co.KG

Pressure: 10 bar Measurement (WxHxD): 384 x 600 x 670 Weight: 54 kg Compressed air connection: 1

Category: 1800: medical equipment
New in: 1993
Price: request quote
Location: Land-de DE 09599 Freiberg
Seller: STIEHL Medizintechnik

Philips swivel hanger/U-arm X-ray machine Cosmos with the following device components: generator Standard 50 tube RO 30 50 RE 1.2/1.8 mobile patient x ray lounger • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff  ...

Category: 1200: machines and plants for process engineering
approved
dealer
New in: 1980
Price: 20.000 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Category: 706: beverage machines
New in: used
Price: request quote
Location: Land-de DE 97753 Karlstadt-Karlburg (bei Würzburg), Industriegebiet Hessheimer Weg 3-7
Seller: Eurolux GmbH & Co.KG

CFE tank Externally marbled Contents: 9,430 litres UNI-NIED Dimensions and weight: Ges. Height: 3500 mm Zyl. Height: 2220 mm Average: 2100 mm Weight: kg Material: V2a Surface: Marinated on the outside, 2Bward-looking IIIC on the inside Topsoil: With vaulted floor Cylinder floor: With 1 manhole 440 x 340 mm With 1 bracket With filling line with spundulate With threaded DN 50 with reinforcement ring Underbody: With vaulted floor With forwards pulled out With disc valve DN 50 With 4 calid feet height adjustable

Category: 1020: other construction machines
New in: 2002
Price: 25.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Rear tyres remaining: 60; Front tyres remaining: 60; Accessories: Leistung (Brief):75, Bereifung (v):405/70-24, Bereifung (h):405/70-24, Allrad, Kabine, Diesel, Teleskoparm (Längenverstellung)

Category: 1404: containers
approved
dealer
New in: 1990
Price: request quote
Location: Land-de DE 92690 Pressath
Seller: Hochholzer Handelsagentur e.K.

IBC Container-1,000 litres-LxBxH 1.225 mm x 1,025 mm x 1,315 mm Manufacine UCON-Material stainless steel 1,4301-own weight about 177 kg High-quality and stable execution. Domain lid 400 mm in stainless steel, vacuum valve, overduck valve, milk thread connection DN 32 with blind nut, Discharge ball tap DN 25 with screwed up camlock clutch, Containers are stackable Transportable with all commercially available forklift trucks. Last purpose in the pharmaceutical sector for acetone and isopropanol!

Category: 1020: other construction machines
New in: 1992
Price: 12.500 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Leistung (Brief):57, Bereifung (v):405/70-20, Bereifung (h):405/70-20, Allrad, Kabine, Diesel, Teleskoparm (Längenverstellung); Maximum lift capacity [kg]: 3000

Category: 1200: machines and plants for process engineering
New in: used
Price: 350 €
Location: Land-de DE 33442 Herzebrock-Clarholz, Hopfengarten 8
Seller: Gierse Handelsgesellschaft mbH i. L.

Julabo HC5 used Umphthermostat from JULABO. It regulates the set temperature in an internal, external, open and closed water cycle. Cost 350 TECHNISCHE DATEN By 8:58 966 HC5, HC8, HC-20B, HC-2 Worktime temperature range ° C 40 ... 250 Operating temperature range ° C-50 ... 250 Property temperature ° C 40 Temperature setting digital Fine regulator ° C ± 1 Temperature control proportional Regulator Pt100 Temperature Constance ° C ± 0.01 P-degree load ° C/W 10-4 P-degree ambient temperature% 0.5 P-degree grid voltage ° C/% 10-5 Heating power W 2000 Radio Distance (VDE 0875) N TECHNISCHE BESONDERHEITES Digital Ibe Displ ...

Category: 1020: other construction machines
New in: 2006
Price: 26.700 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Leistung (Brief):86, Bereifung (v):460/70-24, Bereifung (h):460/70-24, Allrad, Kabine, Klimaanlage - manuell, Schnellwechselrahmen, Diesel, Teleskoparm (Längenverstellung); Maximum lift capacity [kg]: 3000

Category: 2301: robots
approved
dealer
New in: 2008
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

Robot KUKA KR 16 EX Machine type robot KUKA Manufacturer Karstens Model â KR 16 EX Built in 2008-04 Condition well used, machine bed see pictures. Carload/payload: 16 kg Additional load arm/swing/carousel Supplementary load on arm/link arm/rotating column: 10 kg/variable variable/20 kg Total distributed load: 46 kg Number of axes: 6

Category: 1020: other construction machines
New in: 2004
Price: 27.500 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Leistung (Brief):75, Bereifung (v):17.5LR24, Bereifung (h):17.5LR24, Allrad, Kabine, Diesel, Teleskoparm (Längenverstellung); Maximum lift capacity [kg]: 2600

Category: 301: injection moulding machines
approved
dealer
New in: 1985
Price: request quote
Location: Land-de DE
Seller: IDS Trade GmbH

â?¢ Angel ES 700/150 â?¢ fully functional â?¢ Control CC80 â?¢ Bimetaletalline-glinders â?¢ Armored snail (55mm diameter) â?¢ Little hours of operation â?¢ predominantly PP processed

Category: 1020: other construction machines
New in: 2009
Price: 38.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Rear tyres remaining: 100; Front tyres remaining: 100; Accessories: Leistung (Brief):88, Bereifung (v):460/70-24, Bereifung (h):460/70-24, Arbeitsscheinwerfer 4x vorn, Allrad, Kabine, Klimaanlage - manuell, Schnellwechselrahmen, Diesel, Teleskoparm (Längenverstellung); Maximum lift capacity [kg]: 4000

Category: 403: labeling machines
New in: 2004
Price: request quote
Location: Land-it IT INTIMAC - Fagnano Olona (VA)
Seller: INTIMAC

The BL series machines represent the peak of NERI’s production capability in the field of linear labelers and are the culmination of its many years of experience in selfadhesive application. The main features of these series are the particular balcony construction making extremely easy the clearance procedures, the positive transport system of carton in pitch making the machine completely fail-safe, the ergonomics reducing the accessibility in 70 cm only and dividing the machine in three areas: operative, mechanical and electrical. The BL machines can work in-line with other packaging machines, or as free standing units when fitted with required boxes infeed and outfeed devices. Labelling  ...

Category: 1020: other construction machines
New in: 2010
Price: 35.000 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Leistung (Brief):88, Bereifung (v):460/70R24, Bereifung (h):460/70R24, Arbeitsscheinwerfer 4x vorn, Allrad, Kabine, Klimaanlage - manuell, Schnellwechselrahmen, Diesel, Teleskoparm (Längenverstellung); Maximum lift capacity [kg]: 3300

Category: 109: other metal working machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE 57581 Katzwinkel, Sandstr. 22
Seller: Maschinendrehpunkt

CHARMILLES sclerodier-machine mod. Roboform 35 P With QCRi Robot Built in 2001 xyz: 350 / 250 / 300 mm 4 pallet spaces Magazine 54 electrode places QCRi Robot Workplace xyz: 800 â 550 â 370 Erowa Tension System Linear Glaslineale Filter Generator: ISOPULSE Dialectric â Ionoplus: IME-ZK Hours: 30,000 hours Accessories Good condition

Category: 1020: other construction machines
New in: 2004
Price: 26.800 €
Location: Land-de DE -
Seller: Fritz Brandt Landmaschinenhandel

; Rear tyres remaining: 70; Front tyres remaining: 70; Accessories: Leistung (Brief):73, Bereifung (v):15.5-24, Bereifung (h):15.5-24, Allrad, Kabine, Diesel, Teleskoparm (Längenverstellung); Maximum lift capacity [kg]: 3000

Category: 208: lacquer machines
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 01665 Klipphausen, Schwabacher Straße 4
Seller: Höchsmann GmbH

Workpiece width max mm 1300 Workpiece thickness max mm 60 Spray guns total 4 Workpiece feed paper tape Workpiece length measurement Yes Paper ribbon conveyors Yes Workpiece length max mm 3000 Workpiece length min mm 300 Number of colour circuits 2 Number of spray arms 1 Feed max m/min 4.5 Feed stepless Yes Suction fan Yes Spray robot Yes Movement of spray guns linear Workpieces plates CE Sign Yes Total connection kW 11 Space requirement LxBxH mm 7500x5200x2500 Availability at short notice, from location Operational readiness dismantled/stored The technical data are partly information from the Manufacturer's prospectus. Actual values may diffe ...

Category: 1009: excavators
New in: 2009
Price: 38.800 €
Location: Land-de DE Bremen
Seller: Fritz Brandt Landmaschinenhandel

; Accessories: Allrad, Kabine, Diesel, Teleskoparm (Bautechnikeinsatz), Geschwindigkeit:40, Hubhöhe:7.1; Maximum lift capacity [kg]: 4400

Category: 1200: machines and plants for process engineering
New in: 2004
Price: request quote
Location: Land-it IT INTIMAC - Fagnano Olona (VA)
Seller: INTIMAC

Pharmatech Stainless Steel V-Blender Stainless Steel V-Blender Fitted with (2) Angled 650 mm diameter x 800 mm long legs Fitted with 550 mm diameter top lids Feeding common coned 250 mm diameter outlet at 1570 mm height Pallet of Inlet Cones with 250 mm diameter flanged inlets and connecting clamps External Caster Interlocked Operating Control Panel

Category: 102: lathes
approved
dealer
New in: used
Price: request quote
Location: Land-de DE Germany, 45473 Mülheim an der Ruhr
Seller: Surplex GmbH

Weight approx.: 10000 kg Dimensions (l x w x h) approx.: 2800 x 2800 x 180 mm Description: Diameter: 2800 mm width: 180 mm with T-slots only 1 piece is for sale. The photo shows one of the available magnets. There can be no assurance that the pictured here will be delivered. All magnets are technically and optically absolutely equivalent!

Category: 705: pharmaceuticals and cosmetics machines
New in: 2003
Price: request quote
Location: Land-it IT INTIMAC - Fagnano Olona (VA)
Seller: INTIMAC

ROMACO BOSSPAK RTC 200 Counting and Packaging Line. This Line is suitable for counting Tablets Dragees, Hard or Soft Gel Capsules into bottles at speeds up to 200 bottles per minute for a 100 count. The Line is comprised of the following unit machines, which are output-compatible and all designed in accordance with GMP: Romaco Bosspak MS 150 Container Unscrambler and Feeder Romaco Bosspak RTC 200 Electronic Counting and Filling Machine Romaco Bosspak SBE 200 Product Lifting and Feeding Device Romaco Bosspak MC 8000 Screw Capper Relco MICS 1.5 Induction Sealer Romaco Bosspak EXCEL STAR Self-adhesive Labeller Romaco UNSC Rotary Table and all connecting Slat Conveyors

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

container: 7 different pcs., moveable\r\ninclude warming cabinet\r\ntotal size l 915, w 580, h 800 mm\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n

Category: 1800: medical equipment
approved
dealer
New in: 1993
Price: request quote
Location: Land-de DE 09599 Freiberg
Seller: STIEHL Medizintechnik

Pausch swivel hanger/U-Arm Cosmos with the following system components: Generator Stadler SE 3000 Tube Comet DI 101 HS-37/72-125 Mobile patient-/X-ray lounger • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff wit ...

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

product - quantity variable, manuell spraying\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n

Category: 1800: medical equipment
approved
dealer
New in: 1998
Price: request quote
Location: Land-de DE 09599 Freiberg
Seller: STIEHL Medizintechnik

Siemens swivel hanger/U-Arm Vertix UM with the following system components: Generator Polydoros LX 30/50 Tube SV 150/30/50 C 0,6/1,0_Year of manufacture 2010 Mobile patient X-ray table • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performe ...

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-de DE 74321 Bietigheim-Bissingen, Eschenweg 33
Seller: MAFdirekt Maschinen- & Anlagenfachhandel Marcus Epple

Used metal armor cartridges for trump punching machines TC 500/600L In good, usable condition. In some cases also available matrix plates.

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

attachement: 1 piston, filling variabel 5 - 10 g\r\n hopper approx. 1,0 kg marmelade\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n\r\n

Category: 102: lathes
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE 71706 Markgröningen, Dornierstr. 20
Seller: Wolfgang Finken GmbH

general Project #: 905049 Number: 1 pcs. Manufacturer: HYUNDAI Type: Hit 8 S Control: Siemens 840 C Built: 2001 Conservation status: Used machine Layers ca: 1 layered Description turn 2 axes Max rotary diameter 170 mm Max Turning Length 300 mm Max clamping feed diameter 170 mm Max revs main spindle 6000 irlmin Max power main spindle at ED 10-40/100% 8 kW Spindle drawer main spindle 40 mm Hollow stress cylinder on the main spindle Impact facility in the main spindle Rider stick manually movable Riding stove pinol stroke (via M command) 95 mm Number of station/driven by it 8/0 Tool recording in revolver (diameter/cross-section) 25/20 Ã? 20 WEITERE OUT  ...

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

dimension: d 800, h 840, total h 2220 mm\r\nmixing arm 950 rpm (d mixing tools approx. 180 mm)\r\npower: 380 V, 1,5 KW, 950 rpm\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new

Category: 106: presses
approved
dealer
New in: 1989
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Hydr.-cutting press Technical data: -Pressure power 135 t -Working width 3050 mm -Passage between the stands 2550 mm -Table width 180 mm -Exoffload 200 mm -Installation height 310 mm -Delivery speed 100 mm/sek. -Work speed 8 mm/sek. -Withdrawal speed 65 mm/sek. -Pestle hub 110 mm -Adjustment area fixed strokes 120 mm -Drive 400 V/7.5 kW -Space requirements approx. B 3700 x H 2300 x T 1600 mm -Weight approx. 6500 kg -with:-Light barrier protection SICK -Rear stroke manually adjustable from the front -Lace tool + 4-fold universal matrize -front loading arms -Two-handed control desk, foot staster

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n\r\n

Category: 109: other metal working machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-at AT 5580 Tamsweg ( Salzburg ) / Austria // Europe, Nr. 31
Seller: Gebrauchte Werkzeugmaschinen Feruglio - Used machine tools

CHARMILLES sclerodier machine mod. Roboform 35 P with QCRi/Bj. 2001/xyz: 350 â 250 â 300/4 pallet slots/magazine 54 electrode places/QCRi robot/working pool xyz: 800 â 550 â 370/erowa clamping system/Linear Glaslineale/Filter/Generator: ISOPULSE/Dialektric â Ionoplus: IME-CC/hours: 30,000/Accessories/good condition fe.gi.maschinen.sbg.at CHARMILLES erosion EDM machine mod. Roboform 35 P with QCRi/year 2001/xyz: 350-250 â 300/4 pallets/magazine 54 Electrode places/QCRi Robot/Workbench xyz: 800-550-370/Erowa clamping system/Linear Glass Rulers/Filter/Generator: ISOPULSE/Dialectric-Ionoplus: IM E-ZK/hours: 30,000/accessories/good condition fe.gi.maschin ...

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

machine was used for mixing marmelade with water\r\n1. measuring probe: filling height marmelade \r\n2..measuring probe: filling height water\r\n\r\noperation\r\nfill tank with marmelade up to the 1. measuring probe then\r\nfill tank with water up to the 2. measuring probe, pump \r\ndelivers product in circulation until mixture is ready\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n

Category: 2500: miscellaneous
approved
dealer
New in: used
Price: 6.500 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

Under-swinging counter-effect RF generator with small induction voltage for fast precise induction heating. Switchgear with separate RF part. Use in laboratory and industry for any kind of inductive warming such as hardening, soldering, glowing, welding, melting, hovering melting Manufacturer: Linn High Therm Type: HTG-6000/0.4 HR output: 6.0 kW Network supply: 8.7 kVA Voltage: 380 volts Sales under § 25a Difference Taxation Irtuaries and interim sales reserved

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

attachement: 2 pistons, filling variabel 5 - 10 g\r\n hopper approx. 2 kg marmelade\r\n\r\ncategory: bakery machine\r\nSales of bakery machines used machines bakery resolution Food machine reconditioned condition as it is new\r\n

Category: 903: machines for soil cultivation, sowing and harvesting
New in: 2014
Price: 800 €
Location: Land-it IT Bergamo
Seller: Mercury Auctions s.r.l.

Sprinkler irrigation pump Brand Carnivals Model CS7AA Year 2014 On exclusive sale on June 27th at 11 a.m. at Pontirolo Nuovo, (BG), agricultural machinery, vehicles, various instrumentation coming from a farm in the Bergamo area. The vision of the goods will be possible only on Thursday, May 29 and Thursday, June 13 by appointment. For further information, complete catalogue and to fix an appointment please contact us at 0307751645.

Category: 903: machines for soil cultivation, sowing and harvesting
approved
dealer
New in: 2015
Price: 24.950 EU€
Location: Land-pl PL
Seller: Kennedy Machines

Round balers are designed for bales of grass or hay. The picking of the spoil takes place from the swath with a pick-up and the machine is driven from the farm tractor via a power take-off. Complete machine in good condition.

Category: 903: machines for soil cultivation, sowing and harvesting
New in: 2010
Price: 800 €
Location: Land-it IT Bergamo
Seller: Mercury Auctions s.r.l.

Sprinkler irrigation pump Brand Carnivals Model CSLAPA Year 2010 On exclusive sale on June 27th at 11 a.m. at Pontirolo Nuovo, (BG), agricultural machinery, vehicles, various instrumentation coming from a farm in the Bergamo area. The vision of the goods will be possible only on Thursday, May 29 and Thursday, June 13 by appointment. For further information, complete catalogue and to fix an appointment please contact us at 0307751645.

Category: 107: sheet metal working
New in: used
Price: 2.700 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 15 to : 275 mm : 18 mm : 1,1 kW : 45x35x5 L mm : 700 mm : 800 mm : 1.800 mm : 400 kg mech. punching machine miscellaneous stamps and dies Does not comply with the present industrial safety regulation (AMVO &, UVV) punching force: 15 to gap: 275 mm stroke: 18 mm motor: 1,1 kW round hole in 10 mm sheets: 12 mm á round hole in 2,75 mm sheets: 42 mm á oblong holes: 18x18 mm in 5 mm sheets, 30x30 mm in 3 mm sheets V-notching: L 45x35x5 mm U-notching: width x depth 30x45x4 mm length: 700 mm width: 800 mm height: 1.800 mm weight: 400 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103: milling machines
New in: 2000
Price: request quote
Location: Land-de DE 35796 Weinbach, Feldbergstraße 6
Seller: Simon Werkzeugmaschinen und Zubehör

Start-up 2004 Technical details X-Way: 1,600 mm Y way: 1,400 mm Z Way: 1,150 mm Control: FANUC 16iM B-axis: 1 ° table division Table size LxB: Pallet size 1,050 x 1.050 mm Breaking pass X-Y-Z: 24m/min feed 0.001-24m/min Speed: 35-6000 U/min Tool recording: BT 50 Tool magazine: 40 normal (has 120 seats) max. Tool diameter: 120 mm when occupied by neighbouring places, otherwise 270 mm max. Tool length: 550 mm max. Tool weight: 35 kg max table load: Pallet load = 3,000 kg Spindle: 37/45 kW two transmission levels max. 1,306 Nm Machine weight about kg: About 30,000 kg Space requirement LxBxH about mm: 7,750 x 4,965 x 4,090 without coolant system Technical data: -Parallel  ...

Category: 101: boring mills and machining centers
approved
dealer
New in: 2014
Price: used machinery auction RESALE 24.000 €
Location: Land-de DE Germany, 23611 Bad Schwartau
Seller: Surplex GmbH

Weight approx.: 5800 kg x-travel: 800 mm y-travel: 530 mm z-travel: 580 mm control: SIMENS 828D Dimensions (l x w x h) approx.: 2280 x 2060 x 2270 mm toolchanger positions: 30 taper: BT 40 turning speed range: 10-10.000 rpm table surface area l x w : 914 x 500 mm Description: ROMI D800 Vertical Machining Centre control: SIEMENS 828D technical data: spindle taper ISO 40 tool holder type BT 40 speed range 10 - 10.000 rpm rapid traverse X/Y/Z-Achse 30 m/min max. programmable cutting feed 20 m/min travel path: X-axis 800 mm, Y-axis 530 mm, Z-axis 580 mm distance from spindle nose to table 115 to 695 mm T-slot width x distance ->, 18 x 89 [mm] number of T-slots 5 max. weight on table 900 kg d ...

Category: 903: machines for soil cultivation, sowing and harvesting
New in: used
Price: 800 €
Location: Land-it IT Bergamo
Seller: Mercury Auctions s.r.l.

Ginger transplanting machine On exclusive sale on June 27th at 11 a.m. at Pontirolo Nuovo, (BG), agricultural machinery, vehicles, various instrumentation coming from a farm in the Bergamo area. The vision of the goods will be possible only on Thursday 15 May and Thursday 13 June by appointment. For further information, complete catalogue and to fix an appointment please contact us at 0307751645.

Category: 101: boring mills and machining centers
approved
dealer
New in: used
Price: used machinery auction RESALE 1.000 €
Location: Land-es ES Spain, 08240 Manresa
Seller: Surplex GmbH

Weight approx.: 2750 kg Dimensions (l x w x h) approx.: 1500 x 900 x 3000 mm Description: Drilling capacity 70 mm Morse cone Nº 5 Maximum deep of drilling 260 mm Sliding table surface 720x850 mm Power engine 10 HP

Category: 102: lathes
approved
dealer
New in: 2017
Price: request quote
Location: Land-it IT 23801 Calolziocorte, via serta 23
Seller: Industrialbay

revised 2017 Control Fanuc OT / C Serra gripper bars up to mm. 60 Turret to 8 motorized positions VDI 30 Indexing spindle line Nr. 1 toolholder axial motorized Nr. 1 tool holder radial motorized Fixed tool holder September Tailstock retractable with quill in cycle Arm collect pieces chip conveyor Ready for Push bar

Category: 1900: general inventory
approved
dealer
New in: used
Price: used machinery auction RESALE 870 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 4000 x 1500 x 600 mm Description: Arm crane with Scrap Gripper

Category: 903: machines for soil cultivation, sowing and harvesting
New in: used
Price: 50 €
Location: Land-it IT Bergamo
Seller: Mercury Auctions s.r.l.

Ground bucket On exclusive sale on June 27th at 11 a.m. at Pontirolo Nuovo, (BG), agricultural machinery, vehicles, various instrumentation coming from a farm in the Bergamo area. The vision of the goods will be possible only on Thursday, May 29 and Thursday, June 13 by appointment. For further information, complete catalogue and to fix an appointment please contact us at 0307751645.

Category: 1900: general inventory
approved
dealer
New in: used
Price: used machinery auction RESALE 670 €
Location: Land-it IT Italy, 25011 Zona Industriale di Calcinato
Seller: Surplex GmbH

Weight approx.: 800 kg Dimensions (l x w x h) approx.: 3000 x 1000 x 1300 mm Description: For farm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)