We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 27100 € : 547.42 € : 50 mm : MK 5 : 360 - 1.250 mm : 44 - 1.206 (12) U/min : Stahl/Guß: M40/M50 : 2060 mm : 995 mm : 2240 mm : 2300 kg : 441 - 1.345 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 300 mm : 270 mm : 1.785 x 785 x 190 mm : 0,75 kW : 635 x 520 x 420 mm : 2645 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 48700 € : 983.74 € : 65 mm : MK 5 : 440 - 1.580 mm : 40 - 1.920 (12) U/min : Stahl/Guß: M50/M60 : 2850 mm : 1400 mm : 2940 mm : 4600 kg : 380 - 1.600 mm : 0,07 - 0,96 (6) mm/min : 5.5 kW : 432 mm : 370 mm : 2.480 x 1.050 x 210 mm : 1,5 kW : 700 x 500 x 400 mm : 3170 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of Log ...
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 32200 € : 650.44 € : 50 mm : MK 5 : 350 - 1.600 mm : 56 - 1.450 (12) U/min : Stahl/Guß: M40/M50 : 2670 mm : 1120 mm : 2410 mm : 3300 kg : 465 - 1.420 mm : 0,06 - 0,2 (3) mm/min : 3.7 kW : 320 mm : 270 mm : 2.550 x 970 x 200 mm : 1,5 kW : 630 x 500 x 500 mm : 2760 mm : 0,75 kW left/right rotation automatic feed drilling depth limit manual headstock adjustment with hydraulic clamping electric height adjustment of extension arm andhydraulic clamping hydraulicclamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 14600 € : 297.84 € : 32 mm : MK 4 : 220 - 950 mm : 73 - 1.247 (6) U/min : Stahl: M 25, Guss: M 32 : 1800 mm : 830 mm : 2190 mm : 1250 kg : 350 - 1.210 mm : 0,05 - 0,15 (3) mm/min : 1.5 kW : 210 mm : 220 mm : 1.260 x 640 x 160 mm : 0,75 kW : 600 x 445 x 380 mm : 2320 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 6 Monate ab Auftragse : Taiwan : 18300 € : 373.32 € : 42 mm : MK 4 : 280 - 1.100 mm : 44 - 1.500 (12) U/min : Stahl: M 25, Guss: M 38 : 1880 mm : 870 mm : 2210 mm : 1800 kg : 470 - 1.270 mm : 0,05 - 0,15 (3) mm/min : 2.2 kW : 260 mm : 280 mm : 1.725 x 715 x 180 mm : 635 x 520 x 415 mm : 2530 mm left/right rotation automatic feed drilling depth limit manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
6 spindle bar automatic Gildemeister GS20, compound slide with drive in pos. 1, compound slide with drive in pos. 2, compound slide in pos. 4, compound slide in pos. 5, 4x axial spindle (pos. 1, 2, 4, 5), rotating milling device in pos. 3, pick-up spindle pos. 6, swing rear machining arm drive in pos. 3, swing rear machining arm drive in pos. 6, swarf coneveyor, worm type, set of tool holders, set of cams, Number of spindles: 6, Max bar diameter [mm]: 20, Max bar feed [mm]: 100, Spindle speed [rpm]: 214 - 5.168, Spindle motor [kW]: 11, Weight of the machine ca. [kg]: 5.000, Auto bar loader: Pietro Cucchi
used
Measuring and marking plate, measuring table cast steel strongly ribbed STIEFELMAYER from a measuring or marking machine with hand-held measuring arm Masch. No. 22890285 Year of construction 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm- manually movable with measuring arm , measuring range X=1970 mm, Y = 815 mm, Z = 840 mm - with 3-axis digital display Grundig MZ 1030 - laterally machined area at 90 angle 1500 x 350 mm- 5 pieces height-adjustable feet Space requirement L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface; used
used
Offer 10 AMF horizontal tensioner with horizontal foot Gr.3 No. 6830 picture 1-6 The horizontal tensioners are sold due to a business conversion at our customer. They are ready for use. Manufacturer: AMF Type: 6830-3 with one support point Handle color: red Length 218 mm Pressure screw: M8 x 45 Holding force F1 in kN: 1,8 a spare retaining screw with buffer Horizontal tensioner with horizontal foot, galvanized and passivated Execution: Horizontal tensioner with open support arm and horizontal foot. Galvanized and passivated. Stainless steel rivets ergonomic, oil-resistant handle with large palmrest and soft component. The sale takes place ex works EXW in Saxony-Anhalt. further items of tensioners such as -10 AMF horizontal tensioner size 3 No. 6830 with black handle -10 horizontal clamp DESTAC0 USA Model 225U 175 mm 2.22 kN -8 AMF horizontal tensioner with ...
used
offer 23034 Specifications: - grinding length approx. 350 mm - grinding width 150 mm - installation height with / without magnet 150 / 210 mm - Grinding wheel stroke approx. 200 mm - Clamping surface 300 x 160 mm - Magnetic clamping plate 250 x 150 mm - Grinding wheel dimensions approx. 200 x 80 x 78 mm - Grinding wheel speed 2800 rpm - Swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - Wet grinding device - Drive 400 V / 1.85 kW - Space requirement approx. W 850 x H 1650 x D 800 mm - Weight approx. 350 kg
used
Carton stitching machine Speckboetel GFM; good condition; cleaned and tested; longitudinal or transverse stitching; .max. Staple thickness 3mm; Arm length 500mm; suitable for wire 21 and 23. Cardboard wire stitcher Speckboetel GFM; good condition; cleaned and checked; for lenghtwise and cross stitching; max.thikness 3mm; length of arm 500mm; used for wire 21 and 23.
used
Mini Excavator Windstorm XN10 Rhinoceros Diesel Excavator FROM STOCK Net price plus 19% VAT Description Mini Excavator Windstorm XN10 Rhinoceros 1 Cylinder Diesel Excavator Condition: New. available with articulated arm. Surcharge 720 euros. incl. Shovel 400mm -Roof and roll bar -Tool -Hammer line -Work lights Optional: Mech. Quick coupler with 2 bolts : 260 euros Bolt for quick coupler : 10 euros Fang : 210 Euro Mech. Gripper : 320 Euro Rake : 210 Euro Hydr. Hammer : 1780 Euro Hydr. Earth auger : 680 Euro Hydr. Shovel 600mm : 520 Euro Hydr. Shovel 800mm : 590 Euro Load hook : 170 Euro Shovel 200mm : 205 Euro Shovel 400mm : 270 Euro Shovel 600mm : 310 Euro Shovel 800mm : 340 Euro Sale takes place with invoice with shown VAT. 19% VAT included in the price. 015121271265 Model WINSTORM XN10 Fire RHINOCEROS Operating Weight 85 ...
used
Cobot Dual-arm ABB YuMI IRB 14000 1349 operating hours complete Bj.2016 Application Parts Handling Max. load 0.5kg Max. Reach horizontal 0.559m Arms 2 Robot type: Collaborative Best-in-class safety among all cobots on the market thanks to low arm weight, small payload, rounded design with soft protective padding and superior motion control collision detection. Highest safe operating speed (1.5 m/s TCP speed) among all cobots thanks to its inherent security. Compact solution with two arms and integrated control system.
used
Cobot Dual-arm ABB Robotics YuMI IRB 14000 1349 operating hours complete Bj.2016 Application Parts Handling Max. load 0.5kg Max. Reach horizontal 0.559m Arms 2 Robot type: Collaborative Best-in-class safety among all cobots on the market thanks to low arm weight, small payload, rounded design with soft protective padding and superior motion control collision detection. Highest safe operating speed (1.5 m/s TCP speed) among all cobots thanks to its inherent security. Compact solution with two arms and integrated control system.
used
140 AMF Destaco horizontal tensioner with red or black handle, also with cross arm predominate size 3 / 225U No. 6830 and further -See excerpt overview by AMF ( 106 pieces) -6830-3 with a support point handle color red -6830-3 with a support point Grip color: black -8x type 9830-03 with 9895 with cross arm and two support points handle color red -Horizontal clamp DESTAC0 USA Model 225U 175 mm 2.22 kN with red grif -15 Manual toggle clamps DE-STA-CO 205-U length approx. 70 mm -5 Manual toggle clamps such as DE-STA-CO 205-U with orange handle -4 push rod clamps 601 & 2 horizontal clamps 215-U from Destaco Condition: used, ready for use see photos and more from the following areas: -Plastics technology -Metalworking -Electrical Engineering Electronics -Packaging, transport and storage -Fixtures and fittings Details on the offered systems, machines and artic ...
new
Extension arm suitable for 6-10t mini excavator / extension arm to fit 6-10t excavator, length 2 m, weight 230 kg, rear mount 2x fixed bolted, front mount with various quick couplers possible (on request)
used
High-speed radial drilling machine, radial drilling machine, high-speed radial DONAU DR13B Year: 1979 Projection: approx. 800 mm spindle stroke: 100 mm Height adjustment of the swivel arm defective height under arm: approx. 1450 mm speed: infinitely variable 310 - 3400 rpm drilling spindle motor: 0.75 kW 380 V Base: 600 x 500 mm used, tested ! Dimensions: 1400 x 600 x 2000 mm
used
Position switch, crane runway limit switch TELEMECANIQUE XCR E18 ( XCRE18 ) IEC 947-5-1 EN 60 947-5-1 Switching arm length: 200 / 200 mm Switching capacity: 240 V AC, 3 A used, tested ! Dimensions ( without switch arm ): 130 x 130 x 80 mm
used
Position switches, limit switches, limit switches, with roller lever TELEMECANIQUE XCR-T115 IEC 947-5-1 EN 60 947-5-1 Switching arm length ( with roller ): 220 mm Roll: Ø 28 x 80 mm Switching capacity: 240 V AC, 3 A used, tested ! dimensions ( without switch arm ): 95 x 85 x 76 mm
used
bore capacity in steel (diameter): 55 mm arm length: 440 / 1600 mm workpiece height max.: 1500 mm distance spindle/base plate: 455 / 1840 mm spindle taper: MK 5 spindle turning speed range: 14 - 1800 U/min quill stroke: 400 mm feeds: 0,05 - 2,5 mm/U crossrail adjustment vertical: 1000 mm arm swivelling radial: 360 ° boring head horiz. adjustable: 1160 mm base plate surface area: 1800 x 1100 mm total power requirement: 6 kW weight of the machine ca.: 7 t dimensions of machine L x W x H: 2,72 x 1,13 x 3,66 m Accessories: box table 1000 x 750 x 500 mm, drill chuck 3 - 16 mm, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
KITAKO HS4200N Multispindle CNC Lathe YEAR 2007 NO. OF SPINDLES 4 (2 TURNING / 2 LOAD & UNLOAD) SPINDLE TYPE A2-6 SPINDLE SPEED 4,500 RPM SPINDLE MOTOR (HP) 20HP X - AXIS TRAVEL (INCHES) 6.3" Z-AXIS TRAVEL (INCHES) 9.9" MAX TURNING DIAMETER 7.8" MAX TURNING LENGTH 4" FEED RATES (X/Y/Z AXIS) 6693 IPM / 4724 IPM / 2165 IPM CHUCK SIZE (INCHES) 8" (NOT INCLUDED) 2 NOS 8 STATION TURRETS WITH COOLANT THRU TOOLS CARRIER INDEX 1.5SEC/180DEGREE, 1SEC/90DEGREES DIA CURVEIC COUPLING 28.35"WITH 10,780LBS CLAMPING FORCE MACHINE EQUIPPED WITH BOX SLIDEWAYS FOR X & Z AXIS CHIP AIR BLOW DEVICES FOR LOADING CHUCKS - 2 NOS CHIP CONVEYOR HIGH PRESSURE COOLANT (100PSI) MULTIPLE REPETITIVE CYCLES G70 - G76 TOOL LIFE MANAGEMENT TOOL GEOMETRY OFFSET 2 SPINDLE ORIENTATION FOR THE LOADING SPINDLES FANUC ROBOTIC AUTOMATION SYSTEM (2 ) LR MATE200/C/R-30IA MATE ROBOTS (2) ROBOT RISERS (2) END ...
used
Offer 23205 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg
used
Offer 23216 Specifications: - Total payload driven + moving unit 20000 kg - Load capacity per container 10000 kg - Workpiece diameter approx. 500 - 3500 mm - Wheelbase of the articulated support arms man. adjustable - Roller diameter 4 x per support arm 250 mm - Roll width 4 x per support arm 80 mm - infinitely variable rotation speed approx. 100 - 1500 mm/min - Hand-held remote control for re- and Li. run - Drive 400 V - Space requirements Unit approx. W 1700 x H 1100 x D 1000 mm - Platzb. with running unit approx. W 1700 x H 1100 x D 700 mm - Weight tr. Unit approx. 1400 kg - Weight with running unit approx. 1000 kg
used
KAWASAKI 3RS050N-BC02 palletizing robot built in 2018, is designed to increase the productivity of production lines in many industries by automating the process of palletising products. This 6-axis packaging robot features a compact design with a sturdy arm and a long reach, guaranteeing fast handling of goods weighing a maximum of 50 kg. The total weight of the machine is 555 kg. Technical specifications of the KAWASAKI 3RS050N-BC02 industrial robot - number of axes: 6 - arm reach: 2100 mm - maximum payload: 50 kg - axis movement range JT1 axis: ± 180° JT2 axis: + 140° / -105° JT3 axis: + 135° / -155° JT4 axis: ± 360° JT5 axis: ± 145° JT6 axis: ± 360° - axis motion speed JT1 axis: 180°/s JT2 axis: 180°/s JT3 axis: 185°/s JT4 axis: 260°/s JT5 axis: 260°/s JT6 axis: 360°/s - repeatability: ± 0.06 mm - mounting: floor, ceiling - power requirement: ...
new
: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
COMAU SMART 5 PAL 260-3.1 palletizing robot built in 2016, has been specifically designed and configured to increase the productivity of production lines in industries where speed and high precision are required. The use of the machine in the factory allows to fully automate the process of palletising products while maintaining high productivity, optimisation of the process and short cycle times. The packaging robot has a robust arm with 4 dynamic axes with a long reach, allowing it to handle goods with a maximum weight of 260 kg. The COMAU PAL-260-3.1 industrial robot weighs 1250 kg. Technical specifications of the COMAU SMART 5 PAL 260-3.1 robot - number of axes: 4 - arm reach: 3100 mm - maximum payload: 260 kg - additional forearm capacity: 50 kg - axis movement range axis 1: ± 180° axis 2: -49° / +95° axis 3: -68° / -208° axis 6: ± 2700° - axis motion speed axis ...
used
The vacuum mixer-mixer FUERPLA, model AO-85, is of great versatility, useful for all types of food (vegetables, meat, fish, ...), The incorporation of vacuum also allows to increase the organoleptic and conservation qualities of the product. The Opening the lid is manual. Machine entirely built in stainless steel It works with an arm in helical shape and with double direction of turn. The helical arm provides the product with a Unbeatable appearance thanks to optimal mixing and kneading in a short space of time. ELECTRIC CURRENT • 380V 50Hz, three-phase 3Ph + ground POWER • 1.5 kW
used
Measuring and marking plate, measuring table Cast steel strongly ribbed STIEFELMAYER of a measuring or scribing machine with hand-held measuring arm Year of construction 1985 Length 2000 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm - manually movable with measuring arm , measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm - with 3-axis digital display Grundig MZ 1030 - machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces height-adjustable feet Space requirements L x W x H 2000 x 1500 x 2500 mm Weight approx. 2600 kg good condition; used
new
Twino Double Arm Dough Machine Advantages: less dough heating, gentle kneading process Tabletop Simple digital control Timer with 5 speeds and 10 kneading levels for 1.5 - 6 kg dough / 1 - 4 kg flour Water capacity 0.5 - 2 L Arm rotations 36 - 64 rpm Net weight machine 49 kg Motor power 750 W Connection: 230V 50Hz New machine 24 months warranty More TOP bakery machines in stock!
new
Double Arm Kneader Twino 12 Advantages: less dough heating, gentle kneading process Tabletop Simple digital control Timer with 5 speeds and 10 kneading levels Dishwasher safe for 3 - 12 kg dough / 2 - 8 kg flour Water capacity 1 - 4 L Arm rotations 36 - 65 rpm Net weight machine 88 kg Motor power 1500 W 230V 50Hz New machine with warranty More TOP bakery machines in stock!
used
Man MARPOSS M1-C code: 3724094050 length measuring arm: 58 mm cross-section measuring arm: 14 x 29 mm approx. 1.7 m Connection cable with plug New ! dimensions ( mandrel without cable ): 195 x 50 x 50 mm dimensions ( packaging ): 220 x 100 x 100 mm
used
Manual mandrel, mandrel MARPOSS M1-C code: 3724034150 length measuring arm: 58 mm cross-section measuring arm: 8 x 11 mm approx. 1.8 m Connection cable with plug New ! dimensions ( mandrel without cable ): 195 x 50 x 50 mm dimensions ( packaging ): 220 x 100 x 100 mm
used
Manufacturer : Frewitt Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available. Manufacturer : Frewitt Model: MGIF 624 Year : 1975 Type: Stainless steel oscillating arm granulator Material : stainless steel Overall dimensions: 130 X 90 X 250 CM Motor power : 1,5 KW Variable speed, regulator: mechanical Mounted on a stainless steel chassis with 4 wheels Capacity: approx. 1000 kg/h depending on product Technical file available.
used
Tier trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile racks, support arm trolleys -Transport trolley: commission trolley, double-sided support arm trolley -Total length: 1500 mm -Width: 1175mm -Height: 1920mm -additional holders: see photos -Weight: 70 kg
used
Crosscut and miter saw, pull saw, chop saw, panel saw, chop and miter saw, radial saw, radial arm saw -Manufacturer: DeWalt, radial arm saw with table on solid base, mobile -Type: mod. 1600 -Motor power: 2.23 kW -Speed: 3000 rpm -Saw blade: Ø 315 mm -Max. Cutting height: 100 mm -Cutting width: 660 mm -Saw blade: pivotable, tiltable, see photos -Dimensions: 1990/1110/H1420 mm -Weight: 191 kg
used
Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg
used
Workplace equipment, swivel bracket for device holders, monorail ceiling system for device holders, mounting arm, mounting gallows, swivel arm, wall swivel bracket -Swing boom: with balancer 75 kg -Outreach: 4030 mm -Swivel range: 180° -Balancer: Arval type GSB 75 -Steel cable: Ø 5 x 2640 mm -Price/delivery: complete -Transport dimension: 4060/1240/H270 mm -Total weight: 145 kg
used
Gripper finger left + right MARPOSS F1017247232-001 Arm length: 75 mm arm cross-section: 16 x 10 mm Mounting base: 46 x 16 x 12 mm 2x Bore: Ø 11 / 8,2 mm, hole spacing: 25 mm Material: case-hardening steel ( 1.7131 ) New ! dimensions ( single gripper finger ): 203 x 58 x 145 mm
used
The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-360 AU Year of production 1995 Automatic operation type Tape cutting tool 5334x38x1.3 mm Max. dimensions of the cut material 360 x 360 mm Max. diameter of cut material 360 mm Angle cutting missing Arm feed speed 20 - 130 m/min Hydraulic vice pressing Engine power 7.5 kW Producer: KASTO Max. ...
used
Steril Food, SELECTA all stainless steel, fully automatic autoclave, 80 litre capacity. This autoclave is perfectly suited to small and medium-sized production runs and small spaces, thanks to its 80-litre capacity and very small footprint. It meets all the needs of the artisan canner and complies with all French and EEC professional standards. Applications : - Sterilisation of canned food products - Suitable for small production trials and small-scale producers Features : - Rapid water cooling - Highly efficient heat treatment - Preserves the organoleptic quality of food products - Heat treatment parameters are quick and easy to change - 10 configurable programmes - Models with integrated compressor + Automatic loading and unloading arm : Small loading and unloading crane for 80 and 150 litre models with adapter for handling stainless steel baskets. Axial rotation to p ...
used
material width: 200 mm coil weight: 1,5 t material thickness: 0,8 - 4,2 mm straightening roll diameter: 80 mm Number of straightening rolls: 7 Pcs. Coil turner 2370 B Load capacity 1.5 ton. Bandwidth 300 mm Coil inner diameter: 400 - 500 mm Arm length per arm: 670 mm Dimensions: depth 1,230 mm, housing height 1,100 mm, width 1,700 mm Weight: 760 kg. Straightener Dreher 1676 AV-RA2 Material width: 200 mm Material thickness: 08 - 4.2 mm Number of straightening rollers: 7 Number of pull rollers: 4 Straightening rollers diameter: 80 mm Would be down by a running press Documents circuit diagrams, operating instructions etc. available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5
used
bore capacity in steel (diameter): 50 mm arm length: 1250 mm workpiece height max.: ca. 1150 mm bore capacity in cast iron: 60 mm spindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/min feeds: 0,06 - 0,5 mm/U crossrail adjustment vertical: 620 mm column diameter: 350 mm total power requirement: 7,7 kW weight of the machine ca.: 4,6 t dimensions of machine L x W x H: 2,53 x 1,15 x 2,82 m Accessories: swivelling box table, coolant - additional column guide at the end of arm - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Excavator includes banana shovel and ditch cleaning bucket. It also has a joint on the front excavator arm to rotate the bucket separately from the arm.
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 36800 € : 747.04 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, b ...
new
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 35000 € : 710.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : 155 ° : 110 mm : 0,75+1,1 kW : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the ...
used
Siemens swivel arm / U-arm X-ray imaging workstation with the following system components: Alternator Polydoros LX 30/50, Tube Opti 150/30/50 HC 1x detector Protec Rapixx 4343 M2i Workstation Patient couch • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or ...
used
5 Sormac peelers available, available Q2 2024, Onion peeler USM-S100, The Sormac onion peeler USM-S100 combines easy operator use with a good reliability. The operator has within reach a rotating, mounted display panel with all the important functions at there disposal. Also shown is important information like capacity, number of peeled onions, operating hours and malfunction identification.By means of a singulating chain the onions are transported from the infeed hopper and positioned onto the flights of the transport chain. The operator places the onions in the right horizontal position. The rotating knives top, tail and cutting arms make a horizontal cut around the onions., At the end of the conveying section the onions are picked up with a double holding-arm system with rotating holders., This arm is fitted on a rotating structure. During the rotating movement the onion spins around ...
used
Key data: 25 kp, 600 , 200
Rated power at 50%ED: 25kVA Short circuit current: 14kA Electrode force: 220daN Projection: 600mm Arm spacing, stepless: 168-443mm Electrode cone: A3 / 1:10=18 --- Welding control: CS 2 (5-times, 1-program) --- Incl. additional options: -Foot switch - Tubular arm, cone A3 straight -Main switch - 3m connection cable and Cekon plug 32A --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
used
2007 V105 model with up-down accelerator mat for introduction Speed: up to 45 cps per minute depending on format 4 formats available (supplied with the machine): format changes in about 15/20 minutes Large capacity flat case storage magazine Cartoner feed trough conveyor adjustable in spacing according to the dimensions of the products to be placed in the case Motorization of all movements by brushless motors (3 motors) Case pick-up by suction cup arms and volumizing on a chain with adjustable cleats according to case format. Mechanical introduction by synchronized arm with no product / no box system Mechanical bonding (glue tank) Command control on operator panel with touch screen mounted on swivel arm Display of faults and cause of stoppage in French
used
Description: 24 uprights, upright height approx. 4100 mm, upright spacing approx. 1000 mm, 107 arms length 2100 mm, max. arm load 900 kg, max. upright load 5089 kg, 146 arms length 1400 mm, arm load 600 kg, upright load 5089 kg Approx. Onsite Dimension. (l x w x h): 13,000 x 2,400 x 1,500 mm, weight approx.: 9,000 kg