alu alu used for sale

Alu wagons Single price: EUR 125,- + VAT for acceptance from 10 pieces EUR/piece 95,-

saw blade diameter: 400 mm capacity 90 degrees: round: 110 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 200x60 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 140x60 mm total power requirement: 1,5 kW weight of the machine ca.: 130 t dimensions: 0,8 x 0,7 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,210 t dimensions: 0,9 x 1,4 x 1,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New aluminium perforated sheets Material: Aluminum Punched 3-edge Material thickness: approx. 1.5mm

New aluminium perforated sheets Material: Aluminum Punched 3-edge Material thickness: approx. 1.5mm 60x40cm

End milling machine GRAULE AKF 6/250 Single head saw GRAULE ZS 170N Copy router MECAL FR 811 Corner crimper WEGOMA EV 175

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -ALUDEC 112 Ø 180 x 10 MTR -Dimensions: 815/220/220 mm -Weight: 3.9 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -ALUDEC 112 Ø 254 x 10 MTR -Dimensions: 815/270/270 mm -Weight: 5.3 kg

Specifications Year of construction: 1995 Saw blade Ø (mm): 400 Directly from the customer used from November from CH-Pratteln available.

1 Reimelt Zeppelin aluminium outer silo 2 chambers Silo stands on frame Capacity 80m³ Ø 3,000 mm Height approx. 15,000 mm Bulk density 0.8 t/m³ Price on request Phone +49 172 8345457

Geppert Band AM-F 7,30m x 0,30m with drive The plastic modular belt AM-F is characterized by its slim design. Thus, the width of the frame is only 14mm more than the chain. At the linkage it is also only 40mm more. The frame including the chain is 95mm high. The modular plastic chains of the AM-F are easy to clean, particularly hard-wearing and easy to maintain by replacing individual links. Specifications: Year of construction: 2012 Length: 7,30m Width: 0,30m Height: 1,00m Drive: 220/240V 1pH Complete plant closure, wide range of mezzanine floors, pallet racks, shelving racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines More items - new and used - can be found in our shop! International shipping costs on request!

Pneumatic material feed Feed length: 800 mm (multiple stroke possible, max. 2,400 mm) saw blade diameter: 500 mm Cuts between 45° and 90° possible Saw blade speed: 2850 rpm Infinitely adjustable saw feed Minimum quantity spraying device Piece counter with automatic switch-off Weight: 600 kg

Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg

MECAL MC302 GEOS-5 aluminium profile machining centre was built in 2014 in Italy. The machine, characterised by high structural rigidity, quality components and a longitudinal working area with a sliding workstation, is used for milling, drilling, threading and cutting profiles made of aluminium alloys, plastics and steel. Thanks to the sliding workstation, the MECAL machining centre can perform machining on a single work area as well as inside 2 separate work areas, resulting in a significant increase in speed and productivity of the manufacturing process. All 5 axes (X,Y,Z,A,C), driven by motors with digital systems, move on automatically lubricated precision guideways. The clamps holding the workpiece during machining are equipped with an independent power supply system which allows positioning and automatic repositioning of all of the clamps in a very short time. The MECAL GEOS-5  ...

Qty. 1 Second-hand aluminium strip caster – dismantled and in storage Mfc.: Tianzhong, China Built: 2005 Stopped: 2008 Dismantled: 2022, currently in storage Strip width: 1400 mm Thickness: 5 – 10 mm (AL S1000) 5 – 8 mm (AL S3003) Consisting of: Caster roller: 2 x dia. 750 mm x length 1600 mm caster work roll containing support roll chocks Caster shell: 2 x new dia. 820/700 mm x length 1600 mm Shell Alloy: ZTGT-2100 (Upgraded from 32Cr3Mo1V) Surface Hardness: 400-430 HB (43-46 HRC)

Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 350 mm -Drive: kW -Speed: 900/1700 rpm -Dimensions: 900/520/H1280 mm -Weight: 150 kg

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 1x package available -Price: per package -Weight complete: 7.6 kg/package

Qty.1 Second-hand Aluminium cold rolling mill Mfc.: SPIDEM Type: 4-Hi Non Reversing Built: 1964 Installed: 2017 (new mechanical & hydraulic, PLC – ABB, AGC) Stopped: 2020 Strip width: 1700 mm Thickness Entry: 11 mm Exit: 0.2 mm Rolling speed: 450 m/sec. with edge trimming: 300 m/sec. Mill force: 1500 T WR Length: 1830 mm Dia.: 465 / 500 mm Back-up rolls Length: 1830 mm Dia.: 1100/1200 mm De-coiler Max. counter traction force: 5500 kgP Reduction ratio: 1:5.53 Revolution: 72.3 – 199 RPM Speed: 136.5 – 375 m/min. Coiler (2 x 400-1100 RPM) Max. traction force: 15000 kgP Reduction ratio: 1:4.41 (470 m/min.) Speed: 9.9 – 200 m/min.

Bosch Rexroth aluminium profile workstation Bosch Rexroth aluminium profile Complete plastic glazing 4 cm worktop with a light grey melamine resin direct coating 190 x 90 cm Dimensions of the workplace WxDxH 195x93x220 cm Magnifier Magnifying Lamp 8062D2 More items new and used - you can find them in our shop! International shipping costs on request!

For sale. Price on request Phone +49 172 8345457

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit -Hydraulic tank: Universal tank made of aluminum, unused -Tank capacity: approx. 230 l -Connections: see photos -Dimensions: 565/485/H1215 mm -Weight: 40 kg

6 Pieces Zeppelin Aluminum Outdoor Silos Ø 3,500 approx. 240 cbm capacity Bulk density 1.0 t/m³ Length complete: 28 meters per silo for sale. Price on request Phone 0172 8345457

horizontal aluminium tank with 2 consoles Volume: 15 m³ Dimensions: Ø 1.90 x 5.80 m long

saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aluminium silo with hopper, used for plastic granulates, height 6000 mm, diameter 2400 mm, density 1000 kg/m3, capacity 18.5 m³, full and empty detector

MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg

2 Aluminum Exterior Silo approx. 30 cbm capacity Bulk density 1.0 t/m³ Ø 2,400 mm Height approx. 9,500 mm Silos stand on frames for sale Price on request Phone 0172 8345457

Max. saw blade diameter: 500 mm Infinitely adjustable hydropneumatic saw blade feed Pneumatic material tensioners Weight: approx. 450 kg

Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed

MIG Aluminum Welding Wire ALCAN MT-AL 4043A ALSi5 3.2245 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm

MIG Aluminum Welding Wire ALCAN MT-AL 5356 S-ALMg 5 3.3556 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm

MIG Aluminum Welding Wire MTC MT-MIGAL 1450 SG/AlMg 99.5 Ti 3.0805 Diameter: Ø 1.6mm Coil: K300 Quantity: 6kg New ! Dimensions: 300 x 110 x 310 mm

MIG Aluminum Welding Wire ALCAN MT-AL 5183 S-ALMg 4.5 Mn 3.3548 Diameter: Ø 1.6 mm coil: Ø 300 mm Quantity: 6.5 kg New ! Dimensions: 310 x 110 x 320 mm

Aluminum Silo Content Granules Height approx. 7,500 mm Ø 3,000 mm Inhlat approx. 35 cbm Bulk density 0.6 t/m³ for sale Phone 0172 8345457

Alu Plug-in Tube FRÄNKISCHE ROHRWERKE ES Type 32 3000 x 32 mm VDE 0605, DIN EN 50086-1, DIN EN 50086-2-1, Classification: 4456 CE 3030512 3 packages of 30 m New !' Dimensions: 3000 x 500 x 100 mm

4 aluminium silos Ø 2,400 mm Height 17,530 mm Content 70 m³ Bulk density 0.85 t/m³ Vibra floor, sluice discharge, jet filter for sale Phone 0172 8345457

Aluminum circular saw, miter saw, glass strip saw, aluminum miter saw, metal miter saw, compound miter saw -Processing: of flat, angle and solid materials, pipes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm -Weight: 260 kg

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 530 mm capacity 90 degrees: round: 180 mm capacity 90 degrees: square: 170 mm capacity 90 degrees: flat: 380x70 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: square: 150 mm capacity 45 degrees: square: 290x70 mm total power requirement: 2,2 kW weight of the machine ca.: 350 t dimensions: 1,1 x 0,9 x 1,5 m Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Saw blade ...

PREZ-MET PVC and aluminium window production line is a state-of-the-art and comprehensive solution for the mass production of windows. The system enables complete machining of PVC and aluminium profiles within a single working cycle. The production includes all key stages – from precise profile cutting, through milling, drilling, welding to final cleaning of the elements. The PREZ MET window production center is made up of three smaller integrated production lines – one line for the production of window frames and two lines for the production of window sashes. They consist of machines from renowned manufacturers from 2005-2016: – ROTOX ZSA 263 cutting center – PREZ-MET FS 50 end milling machine – PREZ-MET 42 MP copy milling machine – PREZ-MET ZGP 420 four-head welding machine (3 pcs) – PREZ-MET ZGP 380E two-head welding machine (2 pcs) – PREZ-MET ZG 940 single-he ...

Assembly line with 4 assembly stationsRoller conveyor made of aluminium system profile and INTERROLL metal rollersVery universally applicable due to modular elements and assembly pallets 400x700 mmRoller conveyor elements made of aluminium system profile MiniTec - like BOSCH REXROTHExperium height: 815 mmComplete length: 13250 mm4 pieces Longitudinal roller conveyor: usable width 405 mm, length 2500 mm, overall width: 510 mm, 16 rollers each3 pieces transverse roller conveyor: usable width 705 mm, length 1000 mm, width: 810 mm, 10 rollers each1 piece transverse roller conveyor: Usable width 705 mm, length 2500 mm, overall width: 810 mm, 30

Used aluminium tube filling machine made by the Italian company IMA Comadis model 720 A. The Comadis 720 A is an automatic tube filling machine, designed specifically for metal tubes with a maximum diameter of 35 mm. This linear automatic machine is equipped with a crimp-sealing head and a tube orientation system, ensuring precision and efficiency in the filling and sealing processes. The machine features a conical product hopper with a heating/cooling jacket, located at the top of the unit, which facilitates a smooth flow of material. The unit is enclosed in a transparent protective housing, which ensures safety whilst allowing operators to visually monitor the filling process. Access to the interior is provided by transparent doors with handles, facilitating maintenance and cleaning. The control panel is fitted with a range of buttons and a clearly marked red emergency stop button,  ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting ...

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,22 t dimensions: 0,7 x 0,9 x 1,9 m ATTENTION: SPECIAL PRICE! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm Control: total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom Roller conveyors optional Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the us ...

Qty. 1 Second-hand aluminium profile lamination line Mfc.: S.I.M. PACK Srl Model: SIRIO PROFILI TA/200/2S Built: 2011 Stopped: 2026 Voltage: 400 V, 3 ph., 50 Hz The machine applies the protective film simultaneously on 2 flat surfaces of profiles with a max. width 200 mm and height 200 mm and the cut of the film between the profiles is automatic. The machine in made up of a strong electric welded iron tubular frame on which there are: One unit for the dragging of the film on the upper and lower surface composed by a vertical column bearing no. 2 opposed rubbered rollers. No.1 Pulling unit composed by no. 2 rollers position at the exit of the machine. No. 1 Automatic cutting activated by pneumatic cylinder with vertical movement. No. 2 Idle roller table 2.5 m long, with PVC covered rolls and alignmentlocator to get a correct Alignment of the material to be coat with the prot ...

Stock number: D857, Material: Aluminium, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 2500 x W 1260 x H 1000 mm, Legs: 4 pcs.