alu alu used for sale

Uhlmann UPS5ET blister machine for alu/alu blisters, including Uhlmann 149 buffer system. Maximum blister size 272 x 284mm (draw x width), maximum depth 40mm. SyPro feeding system for syringes etc with flexible robotic arm and vacuum grip head. Seidenader camera product presence checking system, VISIOtec VisoScan blister integrity tester, gas flushing with Dansensor MAP Check Combi for measuring the gas content within the pack. Domino D550+ laser printer with Seidenader print control camera. Output up to 400 blisters per minute. As new, with only 350 production hours.

Aluminium profile, connection profile, Einschiebeprofil 96 x 15 x 1000 mm New condition Price per piece: 6,00 348 STK. in stock

wire electrode, welding wire, welding wire -Welding wire: Alumig Mg 5 -DIN: 1732/SG-AlMg 5 -O: 1.20 mm -Dimension: O 300/100 mm -Weight roll: 6 kg

saw blade diameter: 350 mm capacity 90 degrees: round: 100 mm capacity 90 degrees: square: 100 mm capacity 90 degrees: flat: 100 x 195 mm capacity 45 degrees: round: 100 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 100 x 135 mm saw blade turning speeds: 2800 U/min total power requirement: 1,5 kW weight of the machine ca.: 250 kg dimensions: 0,7 x 0,7 x 1,4 m ATTENTION: SPECIAL PRICE - Miter left/right 45° - fixed locking points at the most important miter angles - Pneumatic double clamping device - Safety engine brake - Complete with fog spray device and machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg

Aluminum table, aluminum work table -made of aluminium -1x ground floor -Border -Feet: adjustable -Dimensions: 2020/900/H960 mm -Weight: 30 kg

Aluminum adhesive tape, aluminum tape, aluminum tape -Manufacturer: kip, ALU-Band 345 DIN-4102-B1 -Type: ALU 901 AC -Length: 50 m -Width: 50 mm -Thickness: 30 mm -Quantity: 5 rolls available -Price: per piece, minimum order quantity 2 pieces. -Dimensions: Ø116 x 50 mm -Weight: 0.5 kg/piece

Warneke aluminum tipping body, two axles with steering axle, - Year of construction: 1990, - Support load: 10 t, - Wheelbase: 220cm, - Dead weight: 10.6 t, - Maximum permissible total weight: 30 t

Aluminum table, aluminum work table -Design: stable -Base floor: 1 -Plastic sheets -filing -Dimensions: 1800/700/H820 mm -Weight: 60 kg

Refrigeration Dryer – ALUP ADD 36, Manufacturer: ALUP Kompressoren GmbH, Model: ADD 36 (1), Year of manufacture: 2021, Machine type: Refrigerated compressed air dryer, Description, The ALUP ADD 36 is a refrigerated compressed air dryer designed to remove moisture from compressed air systems. The unit ensures dry and clean compressed air, protecting pneumatic equipment and improving the reliability of production systems., This dryer is suitable for industrial applications where consistent air quality is required, including manufacturing, packaging, and processing lines., Technical Specifications, - Manufacturer: ALUP Kompressoren GmbH, - Model: ADD 36 (1), - Year: 2021, - Product number: 4102005889, - Serial number: ITJ560627, - Power supply: 230 V, - Frequency: 50 Hz, - Power consumption: 0.236 kW, - Phase: 1 Ph, Operating Specifications, - Working pressure: 15 bar, - Maximum pressure: ...

1. BUILT: 1995, MIDI, STRIP WIDTH: 800 MM, THICKNESS: 0.006-0.020 MM; 2. VEB, BUILT: 1972, FOIL WIDTH: 670 MM, THICKNESS: 0.007 - 0,014 MM

Ladies and gentlemen, we may, on the basis of our general terms and conditions of delivery and payment for the trade in used machinery and equipment, offer you the following: Ladies and gentlemen, Offer: 1 piece br. Aluminium continuous casting plant, Make: SMS 3200 tons Price: € net, on request from the location. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection i ...

Technical data in image

Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

Qty. 1 Second-hand 8” logs furnace Mfc.: Tecalex Aluminium Technology Built: 2014 Capacity: 4000 kg/h Consist of: Furnace frame Refractory insulation Burner areas Log guiding system Air-gas piping Air supplying fan Thermocouples Fumes exhaust and recirculation fan Furnace exit door Pneumatic system (for the thermocouples and the door cylinders) Nominal production capacity: 4000 kg/h Log diameter: 8” – 203 mm Zones of burners (nº of thermocouples) Nº 4+2 Thermal nominal power installed: 1440 kW Electric nominal power installed: 35.5 kW Max. temperature: 510 °C Dimensions: 16250 x 2400 x 3200 mm – L x W x H UNITS VALUES N° of burners 187 N° of pilot flames 12 Maximum consumption of natural gas ( 36MJ/Nm3 ) Nm³/h 147 Maximum consumption of propane ( 97MJ/Nm3 ) Nm³/h 61

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

NOE Alu L A lightweight system that can be used to work independently of the crane. The NOEalu L convinces as a real hand formwork, due to its low weight, high flexibility and durability. The low weight of 21 kg/m² Ensures long-term productive Work, even without a crane. The sturdy construction will meet the to cope with the stresses of everyday construction site life. Flexible thanks to a wide, Vertical or horizontal table assortment. The Alulock connects the various components of the system as reliable as it is escaped. The individual panels allow a concrete pressure of up to up to 60 kN /m². NOE Alu L A lightweight system, for work without crane. The NOEalu L convinces as an Hand formwork, due to low weight, high flexibility and durability at the same time. The low weight of 21 kg/m² ensures a permanently productive work, even without a crane ...

Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293

AGEING OVEN FOR ALUMINUM EXTRUSIONS The aging furnaces are used in the aluminium profile industry for the elimination of internal stresses of aluminum materials after extrusion and for hardening them. The ovens are custom designed as batch type with high speed ventilation and high efficiency in order to achieve needed hardness demand on the aluminum work pieces. Motion of the batches is done by a ground trolley or a ground conveyor system. The oven door could be an automatic guillotine type or manual hinged door. The whole process is PLC controlled, data logging option is an advantage during the operation. Electricity, liquid or gas fuel is used for heating the ovens. The ageing ovens are CE certificated and conforms to the European Norms.

specifications: Up to 400 PCS/MIN, 8 sealing heads, continuous rotary sealer. Vial diameter (mm) DF: Min 14, Max 52. Vials height (mm) HF: Min 35, Max 110. Cap diameter (mm) DC: Min 13, Max 33. Cap height (mm) HC: Min. 6, Max. 16. Power: up to 400 rpm. Standard voltage: 400V - 50 Hz.

Dimensions (L/W/H): 6000x1150x2980 mm Weight: 850 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5000x1150x2980 mm Weight: 665 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressor

Key data: 2 , 10

m

piston compressor ALUP Flow rate 665 L/min CW 5,5 Pressure 10 bar Container capacity 350 litres

Separation system oil, water Separation system for compressors condensate 2 x Automatic water separator 230 V

Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked

Alu - Trays for cakes, 400x580 mm/200x580 mm 3 edge 50 mm

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.27-1.86 m³/min Volume flow at operating pressure 10.0 bar 0.37-1.50 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 13.3 kW Rated power motor; IP55 11.0 kW Oil volume 4.7 lt Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above cooling medium temperature 4 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 63 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dr ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor with belt drive Control: fixed speed Control: Airlogic² T touchscreen full-color display Refrigeration Dryer: Integrated Performance data Volume flow at operating pressure 9.5 bar 1.15 m³/min Operating pressure min. / max. 5.5 / 10 bar Total power consumption at 9.5 bar / full load 10.0 kW Rated power motor; IP55 7.5 kW Oil quantity 3.7 lt Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1188 m³/h Free fan pressure 30 Pa Sound level 65 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Dimensions and weight Length x width x height 1625 x 665 x 1535 mm Weight 355 kg Compressed air outlet G 3/4 "ig Capacity compressed air tank 270 lt

Key data: 4 , 8

Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Rated power motor; IP55 3.7 kW Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressure 30 Pa Sound level 57 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer internally wired Dimensions and weight Length x width x height 1,275 x 690 x 1,450 mm Weigh ...

Environmental protection. Improved separation. Also separates stable emulsions. Meets the strictest purity requirements. Highly efficient. Equipment in detail Maintenance indicator Easy maintenance Filtration Polypropylene for free oil particles Activated carbon for unstable emulsions Organoton for stable emulsions Efficiency with activated carbon Max. oil content at outlet 10mg/l Efficiency with Organoton Max. oil content at outlet 5mg/l Technical data Max. compressed air output (medium climate) without dryer & filter 6.3 m³/min Max. compressed air output (medium climate) with dryer & filter 3 m³/min Condensation Tube 2 x 1/2" Water drain 2 x 1/2 " Condensate inlet temperature min. / max. 0 / 60 °C Dimensions and weight Length x width x height 390 x 278 x 428 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Curb weight approx. 5.8. kg ...

Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...

Grain dryer made of ALU two-column MDB-T 2/9, indirect air heater 2500 KW, heating oil, 2 circulating air fan, exhaust air, dedusted, Weishaupt, trapezoidal cladding Tel. 01715213204

Stela drying plant, type MDB-T 1/ 10, aluminum, grain, corn, soy etc. 2 storage containers 2 exhaust fans with 37 KW 2 centro separators Gas burner type Maxon Dismantled for sale immediately. Tel. 01715213204

Manual hand unit: Ja J/N Automatic for single pieces: J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manual hand unit: J/N Automatic for single pieces: Ja J/N Automatic for frames: Ja J/N The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New

Key data: 318 t, 318

Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.

Compressor with tank ALUP HL5000-z10/2M 10 bar 276 m3/h Operating hours: 17854 Tank: 2500 l 2 ALUP single compressors HL 3050-Z488 Motor: 2 x 15 kW used, tested ! Dimensions: 3500 x 1200 x 1900 mm

Plant for fire aluminizing steel wire The total length of the plant is about 56 meters A 01 Wire uncoiler Uncoiling device Uncoiling device A 02 Wire cleaning Electrochemical wire cleaning equipment Ultrasonic wire cleaning device A 03 Wire heating Inductive wire heating Control cabinet Inductive wire heating A 04 Melt preparation - preheating Pre-melting furnace Melting - low pressure furnace A 05 Wire coating Coating device view Coating device A 06 Wire cooling Cooling channel Wire . Quenching tank A 07 Wire - rewinding device Wire rewinding view Wire winder view 2 Total power in KW and total 631 KW 1 Current in A: 593 A Technical performance parameters: Steel wire: C < 1,0 %. Diameter 1,00mm . - 2,00mm Strengths < 1400 N/mm² Coating speed design: Wire diameter: 1,00mm -1,50 mm Maximum coating speed: 120 m/min Wire diameter: > 1,50mm - 2,00mm Maximum c ...

ALUKAP350 machine, manufactured in 2012 by K.SCHULTEN GMBH from Germany. The 2012 K. Schulten GmbH AluKap350 is a specialized industrial machine produced by K. Schulten GmbH, a German manufacturer known for its expertise in producing machinery and components for industrial applications, particularly in aluminum processing. The AluKap350 is typically associated with aluminum profile cutting and processing. Machines like this are designed to handle precision cutting and processing of aluminum parts, which are widely used in industries such as construction, automotive, and manufacturing. The model number, 350, might refer to specific technical characteristics, such as the cutting capacity, blade size, or processing capabilities. Key features of a machine like the AluKap350 could include: Precision Cutting: The ability to cut aluminum profiles accurately and efficiently. High Throughput ...

60 cbm Aluminum Silo Manufacturer: Meyer Bulk density 0.6 Diameter 2.40 m Height 15.50 m Railing Cone 90 ° Drawing available Rotary valve

60 cbm Aluminum Silo Manufacturer: Zeppelin Bulk density 0.6 Diameter 2.40 m Height without railing 15.50 m Cone 90 ° Ladder Railing Filter Rotary valve Drawing available