akw av used for sale

2 cyclones as good as new Type AKA VORTEX Twin TRT 4118 Throughput per twin 95m3/h total 190m3/h Diameter 200mm, cutting cut approx. 50my 1 pcs new cyclone Type AKA Vortex KRS3128 II 40m3/h DM 150 mm All cyclones including overflow line and shut-off valve If required, a refurbished PUMP METSO VASA is also available Drive 30 kW available are also handed in individually

Cyclone nuclear power plant ZF1A New part from stock. May show traces of storage.

System: Used decanter / centrifuge Manufacturer: Alfa Laval Model: full coat screw centrifuge Type: AVNX 616 B-31 . No.: 5006111 Year of construction: 1986 Drum diameter: 190/353 mm Maximum density: 1.8 kg / dm3 Max drum speed: 4000 rpm Panel: including, H. B. 2.00 x 0,80 m Net weight without motor: 1425 kg Other: documentation available

BRAND NEW AVR BY STAMFORD AVR regulator MX321-2 E000-23212 Board Still in factory packing. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

<br>Spinner for Agfa Avantra 44 s - Clompete general&2011 with warranty<br><br>Verf Gbar: now

<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now

control panel for Avantra25 - all details can be seen on the picture. The panel is tested and comes from a functional Avantra25. Available on stock

cassette for Avantra25 - all the details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

input cartridge for Avantra25 - all details can be seen on the picture. The cassette is tested and comes from a functional Avantra25. Available on stock

automatic baling press Manufacturer: Avermann Type: AVOS 1810-5-74/100 Built: 2011 Engine hours: approx. 13,685 h technical data: Pressing force: 100 t Operating pressure 320 bar Filling opening: 1,800 x 1,000 mm Channel format: 1,100 x 700 (W x H) Drive power: 1 x 45 kW + 1 x 30 kW, Total connection power: 105 kW, Hedging: 200 A fully automatic binding 5-fold vertically, Throughput: at 30 kg/m3: approx. 9.0 t/hour at 50 kg/m3: approx. 13.0 t/hour at 100 kg/m3: approx. 20.0 t/hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2,000 Ltr. Transport dimensions: approx. 11,200 x 2,355 x 2,700 mm Machine weight: approx. 23.0 t Machine will be dismantled in January 2021. Subject to errors in the technical data!

drive motor for Avantra25 - all details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

Complete laser and focus module for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

Complete ventilation unit for Avantra25 - all details can be seen on the picture. The unit is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

engine for Avantra25 - all the details can be seen on the picture. The engine is tested and comes from a functional Avantra25. Available on stock

<br>Complete system - still in production -Avantra 44 with 3600 dpi -AgfaLine 44 - short online processor -Agfa PDF-Rip -Agfa PrintDrive Series 3<br><br><br>Verf Gbar: after 10.07.2011

: 1800 mm efective widths: je 400 mm length in total: 2000 mm length in width: je 500 mm carrying capacity: je 3000 kg material: Aluminium weight: je 33 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...

<br>AGFA Avantra 30 with short developers in excellent condition. Total size: 1200, 1800, 2400 and 3600 dpi - max. screen: 75.4 x 63.5 cm.<br><br>Verf Gbar: now

Spinner for Agfa Avantra 44S ,20,000 RPM, refurbihed 2013, with warranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us.

Spinner for Agfa Avantra 30 ,30,000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

Diesel generator set 13 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 2-cylinder, diesel - Water-cooled - Displacement: 794 cc - Power: 11.5 kW / 16 hp - - - - - Generator: - 12 / 13.2 KVA at 400 volts - 9 / 9.9 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Digital start unit (ComAp InteliLite 9) - Manual start at the push of a button - Automatic start function - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - Incl. RCD - - - - - Equipment: - Soundproofed housing - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when t ...

Spinner for Agfa Avantra 25,20,000 RPM, refrushed 2011, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don't hasitate to contact us. Available: Yes

4 PCs. measurement and control cabinets with a swivelling frame and others with drawers and shrouds. Inside some with ventilation and with mounting plate. In frame door socket. Side panel with main switch. As Rittal IT units however incl. fittings. Size H/B/T 2000/800/550 The price is per measurement unit.

Machine name: Paddle dryer used Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of construction: 2002 Speed: 107 rpm Material: Stainless steel Drive motor: 5.5 KW Version: EExdellCT4 Total capacity: 235 liters Wetted parts: stainless steel 1.4571 Gearbox:Helical gear motor Equipment: Double jacket, mechanical seal, wave heating Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Tech. Documentation: yes available Note: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame, Maierkopf HWR 225 Condition: Used very good Price: on request

Carbon fiber shaft for ALV brake 440kW of 1000Nm.Spezialwelle with Flaschstücken. 980 wave length D = 125 flange outer 150.Ohne adatper (photo-packed).Info 0170/2204056Mail fa.raupp@t-online

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

Key data: 8 KW, 3 kVA, 400 V

Gasoline Generator SEB 7500WD-AVR Frequently requested 400/230 volt frame unit for commercial use a, construction, service and agriculture as well as for private emergency power supply. With AVR control for sensitive consumers and high unbalanced load capacity thanks to oversized generator. Specifications Voltage - Frequency 400 / 230 / 50 V/Hz Maximum power 3~400V 8 kVA Continuous power 3~400V 7.2 kVA Power 3~400V cont. 10 A Maximum power 1~230V 3.8 kVA Continuous power 1~230V 3.4 kVA Power: 1~230V cont. 14.4 A Fuel Type: Gasoline Speed 3000 rpm Cooling air-cooled Engine type: Honda GX 390 Emission stage 5 Motor power 8.2 kW Displacement 389 cm³ Cylinder 1 Fuel tank capacity 6.1 l Consumption at 75% load 2.8 l/h Runtime per tank filling at 75% load 2.2 h Dimensions LxWxH 830x510x560 mm Weight (without fuel) 91 kg Sound power corresponding. Directive ...

Spinner für Agfa Avantra 30 ,30.000 RPM, refrushed 2012, with waranty. We have all Spareparts for Agfa Avantra 25/30/44, AccuSet.. on stock. Don`t hasitate to contact us. Available: Ja

<br>Spinner for Agfa Avantra 44s, 20,000 RPM, refurbihed 2013, with warranty. We have all spareparts for Agfa Avantra 25/30/44, AccuSet... on stock. Don't hasitate to contact US.<br><br><br>

AGFA Avantra 30 with short Developer in great condition. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 75,4 x 63,5 cm. Available: now

SEIDENADER INSPECTION MACHINE V90-AVSB Year of manufacturing: 2011 Inspection machine for vials and ampoules. The product is fed out of the inspection cabin, brought into upright position and is then transferred into various discharge systems (accumulation tables or trays). CHARACTERISTICS • Operators: one • Construction: stainless steel • Several lighting systems available on option (white light source provides diffused illumination from behind the rollers to allow inspection against both a white background - light source - and a black background - the rollers - or vice versa to meet GMP regulations) Output: max. 150 objects/min/lane • Mode of operation: continuous or intermittent (switch) • Working height: 900 mm ± 50 mm ENERGY CONSUMPTION • Voltage: 230 V, 0.8-1.4 kW, 50 Hz standard (all desired voltages possible) SIZE • Dimensions: 2300 x 1000 x 1700 mm ...

Complete System - still in production - Avantra 44 with 3600 dpi - AgfaLine 44 - short Online Processor - Agfa PDF-Rip - Agfa PrintDrive Series 3 Available: after 10.07.2011

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Corona pretreatment plant of AFS AVE-120D-KER3/1200 with generator G-30 S-111 (3000 W) For sale is a corona pretreatment plant from the renowned company AFS, type AVE-120D-KER3/1200, including generator G-30 S-111 with an output of 3,000 watts. The system is used for surface pretreatment of films, papers and other non-conductive substrates to ensure optimal adhesion of printing inks, varnishes or adhesives. Technical data & equipment: Manufacturer: AFS Type: AVE-120D-KER3/1200 Generator: G-30 S-111 Power: 3,000 W Working width: approx. 1,220 mm Treatment: Corona (electrical discharge) Application: Pretreatment of plastic films, composite films and similar materials Condition: Used, functional and in good technical condition Operating hours: approx. 50 Particularities: Compact, robust design for continuous industrial operation Low maintenance  ...

Cooling Unit for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Complete Laser Modul for Avantra25 - see all details in the picture. The Unit is out of a well working Avantra25. Available: on stock

Transport Motor for Avantra25 - see all details in the picture. The Motor is out of a well working Avantra25. Available: on stock

Baler Avermann, type AVOS 1411 – 37/60, press force 60 t, year of construction 1994, good condition, with conveyor belt Technical data: Manufacturer: Avermann Maschinenfabrik Type: AVOS 1411 – 37/60 Year of Make: 1994 Engine hours: 21,900 Pressing force: 60 t Drive power: 37 kW Filling opening: 1,400 x 1,100 mm Idle flow rate: 250 m³/h Bale dimensions: 1,100 x 700 mm (W x H), length variable Bale weight: 350-550 kg Binding: 4-fold vertical, automatic Conveyor belt length: approx. 9000 mm Machine dimensions: approx. 6000 x 1700 x 3730 mm (LxWxH) Machine weight: approx. 12,000 kg Note: The press is still set up and can be visited under power on request. Dismantling and loading are not included in the scope of delivery. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or a ...

Supply-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Takeup-Cassette for Avantra25 - see all details in the picture. The Cassette is out of a well working Avantra25. Available: on stock

Panel for Avantra25 - see all details in the picture. The Panel is out of a well working Avantra25. Available: on stock

Lumex Avance-25 by Matsuura The Lumex Avance-25 is an excellent solution for those who want to enter the world of hybrid additive manufacturing in the premier class. It combines laser sintering and milling in one machining center. They help you efficiently produce complex and precise parts, while benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Spindle hours: 12439 Laser Hours: 3476 Size 250x250x185 Gallery with manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ With its rugged build and proven performance, the Lumex Avance-25 is an investment worth it. It offers a combination of reliability, precision, and efficiency that makes it an excellent choice for any shop floor or production line. Please do not hesitate to contact us for more information or to arrange a visit. We  ...