acoposmulti used for sale

Inverter for ENGEL robots Acopos Multi PO 220 Acopos Multi CO160

General SKU323S573 LocationBarneveld MakeAcometi - S.P.R.L. Type4500 Ltr. No.C1570 Year of construction1990 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume4500 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel, Stainless steel 1.4571 (316Ti) Capacity4500 Ltr. Vessel sizesDia: 1800x2596 mm Dished topcheck ManholeDN 450 Top connectionsDN 40 (2x), DN 50 (3x), DN200 OutletDN 80, DN 100 Max. temperature165°C. With jacketonly on the conical part Max. temperature165°C. With paddle stirrercheck Motor6 kW 220/380 Volt Information Total height3,2 m Weight2600 kg Floorspace1,9x1,9 mPressure vesselsAcometiTanks > Pressure vesselsBrand > Acometi What you can expect from Foeth: -- Machine is in working condition - ...

General SKU279M286 MakeACOMETI LocationBarneveld Main Features MaterialStainless steel Volume2000 Ltr. Motor3.6 KW Specified Features - Stirring vessel MaterialStainless steel Closed stirring vessel(1x) Capacity2000 Ltr Vessel sizesdia. 1400x1200mm Conical bottomcheck Dished top sidecheck Manholedia. 300mm Top connections9x Outlet80mm With jacket(bottom) With paddle stirrercheck Motor3,6 KW, 220/380 Volt (Ex) Information Floorspace1,6x1,6 M Total height3,5 M Weight1300 KG ATEX compatiblecheckStirring vesselsAcometiStirring vessels > Stirring vesselsBrand > Acometi What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables, fiber optic cables -Manufacturer: ACOME Contact, fiber optic universal cable -Type: 4x50/125 OM2 N6997 -Application area: indoor and outdoor -Length: 153 m -Price: complete -Dimensions roll: Ø 710 x 410 mm -Weight: 16 kg

General SKU279M275 LocationBarneveld MakeAcometi TypeFiltre Pressure Working pressure3 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.6 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0,6 m2 Capacity515 Ltr Vessel sizesdia. 890x650mm Top connectionsdia. 45mm + 4x aansluitingen Liquid outletdia. 55mm With jacketcheck Max. temperature150 Degr. C. MaterialStainless steel 1.4306 (304L) Information Mach.No.8911 Year of construction1987 Mounted on legscheck Floorspace1,4x1,4 M Total height1,5 M Weight660 KGCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiopharmaceuticalAPIMinerals & inorganicAgrochemicalsBiotechnologyNutsche filtersOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered fo ...

Acoustic hoods für IMA edge banding machines in various versions and dimensions available from stock Modifications / new lacquering available for a surcharge.

Acoustic enclosures Aerzener Delta in different sizes in stock, short delivery time.

Grooving machine for throughfeed process Brand: Vitap Type: Grooving New machine For the processing of acoustic panels Processing unit: - Shaft with 7 presettable saw blades, distance 30mm. - Blade thickness 4mm - Rotation of the shaft , 7000 rpm. - presetting with rapid hook HSK - Max diameter of the blade 125mm Workpieces: - Max. thickness of the panel 50mm - Max weight of the panel: Kg 50 - Max panel size : X no limit, Y 1200 mm, Z 50 mm - Min panel size: X 400 mm, Y 300 mm, Z 12 mm - Panel feeding speed : 25m/min Characteristics: 3 controlled axes: - X Axis - Panel movement with two dinamic clamps - Y Axis - Grooving head movement with pinion and precision rack - Z Axis - Movement with screw at spherical recirculation - Newly patented, high rigidity operating unit movement on Y and Z axis. - Constant side pushing to keep the 0-line - Positioning ...

Thickness 20 mm; working drove 180 mm; length 360-490 cm; Total approx. 18 pieces Auction-ID: A1-46266-508

Perfectbinding line Acoro A7, 16 Station gathering machine type 1571, machine number NN31846/FE1193085, Tensioning element with hand feeding unit, Asir 3, 2 Vacuum pumps, Inhouse blowair, Spiral raceway type 3635 machine number MMFE1237011/75, MM3643, criscross delivery, intermididate element, MM 3642 Book block feeder,Endsheet-tipping element MMFE 1237011/ MNEZ1217462, MM 3648, Acoro A7 28 clamps perfectbinder, Main milling station, Roughening and notching station, Hotmelt spine glue unit, hotmelt side glue unit, Additional PUR spine glue unit, Hotmelt Premelter C80 for spine glue, Hotmelt premelter for side glue, Premelter for PUR spine glue, Pile cover feeder, Ansi water scorring, Scorring system, Double nipping station, Laydown system, MM drying conveyor system approx 50 meter, Reject gate, Muller martini 3671 Three knife trimmer Merit S year 2007 Machine number 1237011 MMEZ 1247462  ...

Troughfeed boring machine Make: VITAP Type: ACOUSTIC For creation of acoustic panels for noise reduction Boring machine with through feed panel, boring from the bottom and automatic panel return to the operator. Three controlled axes: - X Axis - Panel movement by means of a strong pneumatic clamp - Y Axis - Boring head movement - Z Axis - Panel boring - Newly patented, high rigidity boring head movement on Y and Z axis. - Constant Side pusher: Side pusher with constant preload for perfect positioning of the panel on the machine zero point. - New frontal and more user friendly tool change system No limit in panel length High productivity and flexibility - The drilling head processes several holes at the same time - Different grids are possible also drilling grids with shift - Different drilling heads are optional available Easy TPA programming - Control: F ...

Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100S Servo inverter module -Type: 80VD1 00PS.C02X-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Servo drive, power supply module, control unit, converter, controller, servo module, axis amplifier, DC converter, inverter -Manufacturer: B&R, ACOPOS micro 100D Servo inverter module -Type: 80VD1 00PD.C022-01 -Dimensions: 200/65/H105 mm -Weight: 0.9 kg.

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Brunner, servo motor -Type ACO.222A V130 -Voltage: 200V -Speed: 3000 rpm -Shaft: Ø 11 x 20 mm -Quantity: 2x motor available -Price per piece -Dimension: 195/70/H70 mm -Weight: 1.9 kg/pc.

Condensate drain, pressure reducing valve, condensate drain, valve, check valve, control valve -Manufacturer: Bekomat Ecoair, condensate drain type KA02 ACO AO / AK 05 -Voltage: 230 VAC/50 Hz Temperature: 1 °C/ 60 °C -Nominal pressure: max. 16 bar -Quantity: 3 available Price: per piece -Transport dimensions: 220/140/H150 mm -Weight: 1.6 kg/pc.

Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: B&R, ACOPOS P3 servo drive -Type: 8E14X5HWT10.0600-1 -Dimensions: 375/70/H265 mm -Weight: 3.9 kg.

width of the strips: 45.0 mm band length: 850 mm band speed: 8.0 m/sek. voltage: 230 V total power requirement: 0.18 kW MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 400 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 100 mm band length: 920 mm band speed: 7.0 m/sec loading area: 300 x 150 mm motor: 0.44 KW motor: 220 Volt range L-W-H: 470 x 370 x 210 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 200 mm band length: 1490 mm band speed: 8.0 m/sec motor: 400 Volt loading area: 500 x 280 mm total power requirement: 1.5 kW Dimensions (HxWxD): 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 300 mm band length: 2070 mm band speed: 7.0 m/sec surface of working table: 750 x 380 mm diameter: 87.7 Führungsrollen mm engine output: 1.5 kW total power requirement: 400 Volt weight of the machine ca.: 88.0 kg. range L-W-H: 1050 x 600 x 400 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1992 Masterwood MW21.31KS CNC drilling-milling machine Electric throttle (throttle n° ) Electric throttle - 11 fuggoleges + 6 horizontal - 11 ftie:e:oleges + 6 horizontal + furrow - 24.000 rpm 2.04. Noise level The noise level of the cheetah: MW 12.25 KS/ MW 15.38 KS/ MW 18.38 KS/ MW 21.31 KS/ MW 21.42 KS In accordance with 1SO7690 - EN848.3 Furas: - level of acoustic noise Leą at the operator´s load - the maximum power of the instantaneous acoustic footprint is less than - the acoustic difference under the LWA load is below Ćitvalastas: 19,5 dB (A) 130 dB (C) 99,2 dB (A) - level of acoustic noise Leą at the operator´s load: 82,5 dB (A) - the maximum power of the instantaneous acoustical noise is less than 130 dB (C) - the acoustic difference under LWA load is less than 103,4 dB (A) The tests were carried out with a Bruel & Kjaer 223 I precision integral sound  ...

M.T.A.ARIES G 065 HE - new machine, Green R454b refrigerant, 150.000/200,000 BTU (174 / 232 kW), 198 kW effective output, Water IN/OUT 20°/15°C, Ambient temperature +35°C, Green R454B refrigerant, -- Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750 --, Shell-and-tube evaporator, 500-litre storage tank, P3 pump, Constructor Description:, The Aries G series liquid chillers are air-cooled units designed for outdoor use (electrical control panel protection rating IP54). All units are designed, manufactured and tested in accordance with ISO 9001 standards. The design of this range has focused on achieving full-load and seasonal efficiency ratings that meet the limits imposed by eco-compatible design regulations (ErP Tier 2 Compliant) for SEER and SEPR HT ratings, whil ...

Complete MTU E3042Z6 Combined Heat and Power Natural Gas Generating Set CHP With Acoustic Canopy. Ready to run, turnkey low-hour CHP generating set with acoustic canopy. New exchange block was installed 10,000 hours ago (total hours for set 30,000). Engine is in great condition and available for immediate delivery. Make and Model: MTU E3042Z6 Hours: 10,000 Year: 2017 Capacity: Electric Power 390 kW Thermal Power 490 kW Heating water inlet / outlet 70 / 90 C Fuel: Natural Gas Voltage: 400 HZ: 50 Scope of supply: Engine, Alternator (Leroy Somer), Base Frame, Control Panel, Gas line, Piping, Pumps, Exhaust, Intercooler, Cabling from control panel to alternator, Acoustic Canopy, Documentation.

Centrax ROLLS ROYCE 5 MW CX 501 KB7 Gas Turbine-Generator Package YEAR 2011 HOURS 40 000 Equipment List: Turbine/Alternator Housing and its complete contents including: • 1 Allison 501 KB7S DLE Gas Turbine - • 1 Alternator • 1 Epicyclic Gearbox • 1 Acoustic Enclosure • 1 Alternator Control Cabinet and Software • 1 Turbine Control Cabinet and Software • 1 Auxiliary Distribution Cabinet and Software • 1 Lubrication Unit including Oil Cooler • 1 Fuel Supply Circuit in Acoustic Enclosure • 1 Electro-Hydraulic Starting System- • 1 Compressor Cleaning System • 1 DC Power Supply • Battery Charger • Fire Protection and Gas Detection Circuit • Fan acoustic enclosure • Air cooler fan List of components: • Control/command panel and room and its complete contents • Filtration assembly and combustion air ducts • Filtration assembly, silencers and box ventilat ...

Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 100,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved . Rated capacity 100 cbm Piece 1 new The tank is made of steel built Novembe ...

AHL Storage Tank Liquid Fertilizer Tank Storage Tank AHL Tank Storage Tank AHL Storage Tank AHL Storage Tank Liquid Fertilizer Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 60,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank is used and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved ...

dimensions – Height (soundproofed) [mm] 930 – Height (supersonic insulated) [mm] 2120 – Width (acoustic/supersound-insulated) [mm] 1200 – Depth (acoustic/supersound-insulated) [mm] 980 weight – soundproofed [kg] 315 – supersound-insulated [kg] 365 Highest sound pressure level [± 3 dB(A)] according to DIN 45635, part 13 86/79 – schallg. / supersound-insulated [dB(A)] Measuring area measure 15/15 schallg. / supersound-insulated [dB(A)] Formwork power level 101/94 – schallg. / supersound-insulated [dB(A)] compressor compression final temperature [°C] 110 Volume flow to PN 2 CPTC 2 at: – pmax = 8 bar [m3/min] 3.35 – pmax = 10 bar [m3/min] 2.85 – pmax = 13 bar [m3/min] 2.45 Motor Rated power [kW] 22 rated speed – 50 Hz [min-1] 3000 – 60 Hz [min-1] 3600 Protection class IP 55 Design IMB 3 ISO Class F Electrical connectio ...

AHL Storage Tank Liquid Fertilizer Tank Storage Tank AHL Tank Storage Tank AHL Storage Tank AHL Storage Tank Liquid Fertilizer Tank- & Environmental Protection Wozniack specialist company according to Section 19 Water Budget Act offers as follows. Ladies and gentlemen, we offer a 25,000 litre storage tank for the storage of liquid fertilizer as follows. The storage tank is used and the kissing inner shell is new. Delivery time about 2 weeks since the inner shell is still manufactured. The storage tank is mounted from the inside with a brand new plastic inner shell, resistant to storage of liquid fertilizer. An acoustic leak detector is mounted outside in a protective box (lockable). The plastic inner shell has a general building inspection approval. And is therefore for the storage of liquid fertilizer AHL and NOX reducing agent AUS32 AdBlue suitable and approved ...

Kawasaki M7A-03D 7.2MW Natural Gas Turbine Complete CHP Generating Set Completely self-contained Kawasaki M7A-03D 7.2MW Gas Turbine and Generator package with Heat Recovery (Thermic Fluid Heater and HRSG Hot Water Generator) in acoustic enclosure. Runs parallel with grid. Island operation mode. Make and Model: Kawasaki TD80A Capacity: 7200kW Hrs: 10,000 V: 11,000 HZ: 50 Year: 2010 Fuel: Natural Gas Scope of supply: Gas Turbine GPB 80, M7A-03 DLE Single Gas Fuel, single shaft with DLE Combustor, reduction gear box, coupling with guard, Diaphragm Type, Generator (TD80A, 2011) Heat Recovery System - Thermic Fluid Heater, HRSG Hot Water Generator Acoustic Canopy with Lighting Control and Instrumentation Exhaust collector and/or diffuser, Gas Fuel system, Lube oil system, Inlet ducting, Inlet filtration system, Inlet silencer, Combustion system, Protection system ...

Key data: 48 KW, 60 kVA, 400 V

ON HAND STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-DSV4536 Primary power: 60 kVA / 48 kW Standby power: 60 kVA / 48 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Doosan Engine Model: D34 Displacement (L): 3.41 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2430 mm Width: 1056 mm Height: 1600 mm Weight Open: - kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and cables Elect ...

Key data: 70

MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

The Pannkoke 7011 CeDe is a vacuum lifting system for glass and similar materials. It is designed for the safe and flexible internal transport of heavy sheets. Below you will find the key specifications. ⚙️Main technical data Type: Vacuum lifter Year of construction : 2001 Serial number : 2001/ 2184 01 Vacuum circuit: o 1-circuit system with vacuum tank, check valve, vacuum switch and vacuum gauge o Closed circuit prevents vacuum loss in the event of a power failure o Acoustic signal when there is insufficient vacuum o Vacuum generation: o Built-in low-maintenance vacuum pump (dry running) Battery-powered, with quick-change system (battery change < 1 minute) o Charger for second battery (110–230 V, 50/60 Hz, 1 phase) o Operation: o On/off directly on the device o Suction/release via remote control o Suspension: 2-fold crane suspension, rotatab ...

Key data: 400 KW, 415 V

4 x Zero Hour Scania 400KW Generating Set in Acoustic Canopy Container Fuel: Natural Gas Hours: 0 Frequency: 50 Hz Scope of supply: Complete unit including Acoustic canopy, Engine, Alternator, Base Frame, Comap Control Panel, Gas Line, Radiator. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.

Air-controlled cellar unit of the DUOMAT type series, which can be used both in the storage cellar for filter and storage tank charging and in the pressure tank cellar for filler charging. Due to its automatic switching and venting system, the device replaces the manual changeover work of a conventional blending apparatus and thus provides maximum safety and simplification in cellar work. Features: Collecting lantern, two pneumatically operated disc valves for the tank connections, disc valve for manual operation, pneumatic switching pulse generator in connection with float system, control manometer, venting valves on the lantern cover, two additional valves on the inlet connections. All pneumatic elements, compressed air filter with water separator, acoustic signal, control buttons are housed in small stainless steel control cabinet., Additional title: one lantern, Voltage: 220 V, Frequ ...

Used KRONES STARMATIC labeller machine 20000 BPHTechnical Specifications & Performance DataManufactured by Krones, the Starmatic is a rotary cold glue labeling machine engineered for precise application of pre-cut paper labels on glass bottles. This second hand unit is an excellent fit for a used bottling line where reliable labeling performance and easy integration are required.Production speed: up to 16,000 bphContainer material: GlassCurrent bottle format: 1.0LLabel type: Pre-cut paperLabeling method: Cold glueMachine type: Rotary, clockwise rotationNo. of plates: 16Machine pitch: 187 mmLabel magazines: 2Dimensions (L x W x H): 3200 x 3000 x 2500 mmWorking height: 1200 mmElectrical supply: 400 V, 3 PH, 50 HzCurrent draw: 17 ACompressed air: 7 barYear of manufacture: 2010Advanced Automation & Control SystemsThe machine is equipped with proven automation and operator interfaces to suppo ...

Used KRONES CONTIROLL labeller machine 12000 BPHTechnical Specifications & Performance DataThis rotary labeling machine is engineered for high-efficiency roll-fed OPP labeling with hot melt application, ideal for second hand industrial packaging environments and integration into a used bottling line. Manufactured by Krones, it combines robust mechanical construction with precise label application for beverage production.Manufacturer: KronesModel: ContirollYear: 1998Production speed: up to 12,000 bottles/hourContainer types: Designed for PET bottle handlingCurrent bottle format: 1.0LLabel type: OPP (oriented polypropylene), roll-fedAdhesive: Hot glueLabel placement: Wrap-aroundMachine type: RotaryWork direction: ClockwiseNo. of plates: 16Machine pitch: 152 mmLabel magazines: 2Electrical: 380 V, 3-phase, 50 HzRated current: 31.06 ACompressed air: 7 barApprox. footprint (layout): 2550 x 224 ...

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506

• 120 tons total pressing force • Pressing area 3,000 x 1,350 mm • With patented, thermostable electric heating plates with automatic temperature control system • Connected load of the heating plates with economy circuit 10.6 kW • Connected load of the hydraulics 2.2 kW • in 6-cylinder version Ø 85 mm • Lockable main switch • Push-button control • Stop button • Safety ripcord, safety edge • Timer with automatic opening and acoustic signal • Stroke = opening 400 mm • Infinitely adjustable stroke limitation • 2-stage hydraulics with automatic pressure follow-up • Compact hydraulic power unit mounted maintenance-free in the oil tank • Teflon bronze guides in the cylinders • Hard chrome-plated steel pistons • Heavy rack and pinion compensation for synchronous table movement • fully open on four sides • Economy circuit installed as s ...

Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing  ...

The PEWO Pack 250 compact basic machine includes the following assemblies: - Alarm and status display of the machine in plain text format - Servo technology - Product-specific control of all servo axes, selectable via recipes on the HMI - Film monitoring, advance warning with visual and acoustic indication as well as machine stop at the end of the film or film tear - Closing beam driven by servo motor and spa operation - Pneumatically controlled hold-down device at the outlet - Height adjustment of locking beam and hold-down device - Sealing unit - Low-wear sealing system thanks to Teflon-coated sealing bar with precise temperature monitoring - Cylinder monitoring with fault indication on the HMI - Protection class IP 54 - Product protection, closing area secured by light barrier - Treadmill shutdown monitoring with automatic restart - Congestion switch with potential-free  ...

Te Koop: Endress & Hauser Drukniveauopnemer level sensor. Delta pilot. Type: DB50-L-ACooBC13GG30

Second-hand machine type Pester Pewo pack 450 Pester PEWO-Pack 450, built in 2003 only 2700h operating hours For tightening insulating individual and collective containers with PE film in the pharmaceutical cosmetics and food industry The technically high-quality series equipment includes: - compact and stable design in modular design - Control console with 4-line plain text display for the following, piece counter, speed display, hour counter, temperature monitoring, general fault indicator - Wear-free, infinitely adjustable, patented tightening system - Product protection by means of safety monitoring by means of light barriers in the closing area - Film monitoring, advance warning with optical and acoustic display as well as machine stop at the end of the film or film tear - Single aeration - Machine mobile, i.e. it has steering and buck rollers for internal transport, ...

Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

Gallus EMS 340, 2009(8) Transaction Splice detection with acoustic warning signal Web edge control Web Tear Control 2x Corona enema, behind movement 4 (Vetaphone/Softal) 1x web cleaning Arcotec 8 printing platforms 8 flexographic printing units 3x screen printing units interchangeable 2x rotary punching machines Scoring tool with cross-cutter Rail 1x additional on/unwind (laminate) 1 x additional cold foil stamping Insertion offset station for the production of multi-layer labels ( web offset device ) 8x GEW UV drying with cooling roller Hyfra Cooling Machine BST Video Control Automatic register control Sensotec Job data management for up to 500 jobs Format Length Correction in the Printing and Processing Area - Recommended for Stretchable Materials Mesh winder Takeup Stretching roller and pressure arm for wrinkle-free winding of thin films and aluminium. 1x tran ...

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

Key data: 400 t, 800 mm

Oil-hydraulic double-column press 400 T with sliding table Press type: Double column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. 4000 kN Free tear-off force max. 400 kN Print build-up time Closed tool steel on steel Max. 4 sec. Dimensions: 3,800 mm long and 4,475 mm wide Max. opening width 800mm Stroke 800mm Table height above floor 1100mm Height above ground (height) approx. 4300 mm Hall height min. 5500 mm Parallel deviation at 20°C +/- 0.1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.2 mm/m Weight Total weight of the press without consumables and table top approx. 28 tons Press table Table size 1500x1500 mm Velocities Quick closing at 100 mm sec. Pressing speed 8 – 3 mm sec. Acoustic pressure Sound pressure level, measured at a height of 1.5m on the control pane ...

Key data: 36 KW, 45 kVA, 400 V

ON HAND NEW STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-YSV4536 Primary power: 45 kVA / 36 kW Standby power: 49 kVA / 39 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Yanmar Engine Model: 4TNV98CT-IYE Displacement (L): 3.32 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2220 mm Width: 960 mm Height: 1263 mm Weight open: 960 kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and ...

Key data: 3155 , 10500

Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.