Hydraulic hammer / hydraulic-Meisel attachment used. For bobcat, mini excavator and small wheel loader with holder on fork carrier. Manufacturer/Type: unknown Holder approx. H-400 mm, W-1114 mm Meisel-A approx. 70 mm Meisel length approx. 400 mm Pressure: 400/850 PSI Total approx. 1160 x 1000 x 800 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Can be taken away from our yard for Free., 0 �

SORTING GRAPPLE-ROTAR For excavators 20-30 t Quick coupler SH 48 Year of construction 2016 Little used, very good condition. Price Warehouse Lower Saxony freely loaded!

Year of construction 2010, 275 kg dead weight

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

90 cm working width, 450 l capacity, 1250 kg dead weight

ID3129 MRS 5,5 cbm grapple 5.5 cbm MRS hydraulic grab 5.5 cbm MRS Hydraulic Grapple

80 cm working width, suitable for Volvo S2

Footplates K1 for signs and barges as well as construction fences etc. large remaining stock new available immediately.

Type: SW2-Q LHR924LC, year of manufacture 2013, 295 kg dead weight

We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.

NEW, 1 set suitable for JCB q fit weld-on hook

various grippers/pliers in stock (see photos) each with adapter plates

NEW, suitable for CAT TH407

xxxxxx

1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Bobcat 114 cm attachment, various Bobcat attachments in stock (Bobcat telehandler; skid steer loader 90 cm and 114 cm)

Snow sign of the company Albert Uenningmann, suitable for cyclists Gehlmax KL 265. 2np70ra It is in very good condition as it was rarely in use. Dimensions: Shield: 150 cm x 60 cm Bracket: 80 cm x 45 cm (trapezoidal)

Overall length 110 cm, diameter 13 cm, pointed chisel suitable for hammer HS1500 or HS1600, Year of construction: 1

Cab for mini excavator approx. 83cm x 100cm with windscreen wiper and opening front Slight paint chipping

Ripper tooth - ripper tooth with various mounts suitable for Martin, Geel, Winkelbauer, Baumaschinentechnik, Lehnhoff, Verachtert, Miller, Oilquick and many more. for excavators from 1t to 35t Demolition tooth made of HARDOX400 with replaceable tooth, remaining parts made of S355I2+N steel listed price is for the 1-2t excavator version

Hydraulic hammer demolition hammer for excavators from 4to to 9to Manufacturer MUSTANG Model HM300 (Unused) Building YEAR 2021 Serial number AH21XXXX Operating hours 0 Accessories: Chisel Weight 275kg Working pressure 60-80 bar Flow hydraulic oil 40 - 100 liters / min

Fuel container steel double-walled, counter pump 230V approved for road traffic Hazard voucher-free

1 set of welding hooks, with Volvo attachment

Product: Model No.: GH-Flex-100 Recording MS03 Symlock Working width 1000 mm Opening dimension 310 mm Depth approx. 400 mm Weight 101 kg Volume (SAE) 81 L Swivel angle 2x 45° Swivel cylinder (KRAMP) 1 piece Base body made of S235JR Cutting edge 110/12 - from HB 500 Colour Black semi-gloss Properties and Features Bottom and side panels made of S235JR Side cutting edge 10 mm Knife 110 x 12 mm made of HB 500 High-quality paintwork (primed/varnished) Water drainage holes Economical bucket geometry for effortless penetration (Taper per side 2°) Transport hook for easy transport internal hoses to the cylinder Cylinder protection all moving parts are equipped with grease fittings equipped Hydraulic connections 12 L / M18

115 cm work brite, suitable for Volvo S2 mount

Hardox Backhoe Bucket SIT-Pro 400 from STAHL INDUSTRIE Pro-Line Extra stable design Laser Cut Extra reinforced side bolsters Robot welded Narrow multi-edging of the back elements Knife and side blades: Tempered on:470-530 HB Bucket safety element on the holder for easy construction site transport MADE IN GERMANY (Welds with calibrated welding machines, DIN 1090 certified welding company.) Recording MS03 Length 500 mm Width 400 mm Height 400 mm Volume 43 l Weight 58 kg Model SIT-pro 400

110 cm working width, suitable for 20 t excavator

Concrete silo, conical, 375 l