With 50mm bolt, mounting width 190mm,, matching VTN - Nino de Martis, Martin (old version) recording

NEW, 300 cm working width, approx. 2.20 m³ capacity, 800 kg weight, with JCB Q fit attachment

Screw-on plate with Martin M10 mount, - Suitable for demolition & sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Mount: Martin M10, - Hole pattern: 36 x 48 cm, - Made of mechanical steel S355, - Dimensions see product pictures, - Immediately available from stock

NEW, Bobcat adapter 90 cm with Euro mount, 130 kg net weight

Original Case backhoe bucket, as new, 60 cm, Further range of backhoe buckets for all common construction machines, excavators, quick-change systems, such as Martin, Geel, Winkelbauer, Lehnhoff, Verachtert, JCB, Geith, etc. available.

Original JCB backhoe as good as new 60cm

NEW, 140 kg net weight, suitable for 1.5 - 4 t excavators, oil flow for excavators 15 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

NEW, 690 kg net weight, suitable for 7 - 16 t excavators, oil flow for excavators 45 l/min, with mounting plate, available with various mounts such as Martin & Lehnhoff mounts

285 cm working width, suitable for Doosan, Daewoo wheel loaders

Sell this used, little-used quick coupler Verachtert, type SW 2008. The coupling plate has a thickness of 40 mm. Transport dimensions (L x W x H) incl. pallet: 1.47 x 0.93 x 0.65 m Weight: 600 kg Forklift for loading is available.

table length: 400 mmtable width: 400 mmtable load: 600 / 1000 kgControl: total power requirement: kWweight of the machine ca.: 120 kgdimensions of the machine ca.: mUsed rotary table in very good condition, little used (less than 100 hours)Has been used with a Bosch CNC control.Table diameter 400 mmBosch AC-MotorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Breaker Rammer 3288 E 3 times available Hydraulic Breaker Manufacturer: Rammer Type: 3288 E Year of Make: 2020 Strike hours: -Hammer 1- 935h -Hammer 2- 722h -Hammer 3- 660h Carrier class: 26.0 - 42.0 to. Weight : approx. 2400 kg Adapter plate: Verachtert CW 45 S Other: not overhauled, sold with chisel and hydraulic hoses

Bar Tensioning System - Post-Tensioning System DYWIDAG 4 pieces of post-tensioning systems for reinforcing steel Pressing force 60 tons for rod types up to WR 32 Piston stroke 50 mm Piston area 132.54 cm² Operating pressure max. 500 bar Length of the jack 401 mm Total weight of the 4 presses 160 kg

floor-plate length: 5000 mmfloor-plate width: 1800 mmfloor-plate height: 290 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heavy Duty Drive Wheels - Drive Wheels with Hub Groove Wheel diameter 350 mm Wheel width 100 mm Elastik - Solid rubber on cast iron - Wheel centre Axle diameter 65 mm Hub groove width 18 mm Hub groove height 5 mm Hub length 100 mm Weight 19.4 kg 20 units in stock - new - unused - -Unit price-

Hydraulic cylinder for ATLAS loader crane Stroke 750 mm Piston rod 125 mm Outer diameter cylinder tube 235 mm Piston diameter approx. 200 mm Length retracted center - center bolt 1,100 mm Bolt diameter cylinder tube 80 mm Width of the mount 245 mm Bolt diameter 100 mm Both bolt mounts with plain bearings Spare part number original Atlas 4189526 Width of the piston rod holder 130 mm Weight approx. 330 kg / piece Original price approx. € 9,500,-- -New- - 2 pieces in stock - price per piece -

Agicom recycling machine trade: Battery-powered cutters

We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.

Sell Bosch Demolition Hammer GSH 11 VC The machine is in good condition, functional and tested.

Bosch Demolition Hamer; Mortise hammer GSH 5 CE. 5 Units In Stock

Concrete pulverizer, concrete tongs, attachment used for excavators. Manufacturer: MUTLEY Type: C116 with quick coupler Total approx. 3000 x 750 x 1300 mm The device comes from a warehouse liquidation and is probably unused. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

BOMAG BS 180 Grit Spreader for Roller / Grit Spreader Sprayer for Compactor, Grit Spreader & Hydraulic Arm, Year 2008

LEHNHOFF 2,400 mm Excavator Bucket Trench Swivel Bucket SWA 66 Year 2012

DIGGING BUCKET 1,500 mm attachment tool, excavator bucket bucket with teeth

Hydraulic hammer demolition hammer for excavators from 4to to 9to Manufacturer MUSTANG Model HM300 (Unused) Building YEAR 2021 Serial number AH21XXXX Operating hours 0 Accessories: Chisel Weight 275kg Working pressure 60-80 bar Flow hydraulic oil 40 - 100 liters / min

Hydraulic hammer / hydraulic-Meisel attachment used. For bobcat, mini excavator and small wheel loader with holder on fork carrier. Manufacturer/Type: unknown Holder approx. H-400 mm, W-1114 mm Meisel-A approx. 70 mm Meisel length approx. 400 mm Pressure: 400/850 PSI Total approx. 1160 x 1000 x 800 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

19000440 Gasoline-powered Chisel included Auction-ID: A7-41034-56

16001025 including 2x chisel Auction-ID: A7-41034-7