Manufacturer:
(Category: 103-205)
Inv. Num. : 8441 Type: KOMBI 1000 Producer: Reckermann Generated: Parameters: Work table length: 1370 mm Work table width: 400 mm X-axis travel: 1000 mm Y-axis travel: 350 mm Travel Z axis: 450 mm
x-travel: 400 mmy-travel: 350 mmz-travel: 400 mmtool taper: SK 40 spindle turning speed range: 1,0 - 4.000 U/minfeeds: 0 - 2000 mm/minquill stroke: 60,0 mmtable-size: 650 x 350 mmT-slots: 14 H7 Control: TNC 124 engine output: 5,5 kWweight: 1800 kgdimensions of the machine ca.: 2000 x 1000 x 2100 mm New price ~ 55.000 euros ()Furnishing :- Universal tool milling machine- HEIDENHAIN pattern control TNC 124- The control panel can be swiveled to the right of the machine- hydraulic tool changer (DIN 69872)- Vertical milling head - SK 40- X-axis feed .. 0 - 2000 mm / min- Y-axis feed .. 0 - 2000 mm / min- Feed Z-axis .. 0 - 2000 mm / min- Central lubrication, electrical- coolant device- Chip tray- Operating instructions for machine + control Special accessories included:- hydraulic machine vice- many tool holders- HEIDENHAIN HR 410 electronic handwheel The data for this ad was created with Mod ...
Key data: 500 mm, 200 mm
Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG
x-travel: 550 mmy-travel: 155 mmz-travel: 350 mmtaper in main spindle: SK 30 / DIN 2080 table surface area: 640 x 200 mmturning speeds: 50 - 1500 U/minfeeds: 30 - 340 mm/mindistance spindle - column: 165 mmdistance spindle nose and table: 245 mmvoltage: 380 Vtotal power requirement: 1.3 kWweight: ca. 1250 kgrange L-W-H: 950 x 1000 x 1600 mm from a vocational school (!)Furnishing :- robust / conventional universal milling machine- rotatable / swiveling vertical milling head- Stable T-slot clamping/angle table- automatic table longitudinal movement- Feed range adjustable - 8x steps- Pole-changing drive motorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1100 , 700 , 500
Universal Milling HURON NU4 Travel X: 1100 mm Travel Y: 700 mm Travel Z: 500 mm Spindle SA50 (supplied with on reducer SA50/SA40) Spindle speed: from 30 to 2066 RPM Table size: 1435 x 460 mm Universal Head Spindle motor: 9 kW NEWALL 3-axis scale Lubricant pump Voltage: 380 V Width with ends table: 2500 mm / without ends table: 1500 mm Depth: 2300 mm Total height: 1800 mm Weight: 3,1 T
x-travel: 510 mmy-travel: 450 mmz-travel: 410 mmtaper in main spindle: MAS BT 45° (SK40) table surface area: 800 x 395 mmT-slots: 6 Stk.turning speeds: 50 - 2500 U/minfeed stepless: 4-1600/4-1000 mm/minvoltage: 400 Vtotal power requirement: 5.0 kWweight of the machine ca.: 1400 kgrange L-W-H: 2300 x 2300 x 1800 mm from a training workshop maintained condition ()Furnishing :- robust universal milling machine- swiveling control panel, right front- rotatable universal milling head (re/li = 90°) with hydraulic tool clamping- manual milling spindle feed, with locking- swiveling milling spindle protection- Stable T-slot clamping/angle table- Axis feeds with rapid traverse- Central lubrication unit- Control cabinet, installed on the left Digital display - without function Machine link :http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9131203The data for this ad was crea ...
Key data: 700 mm, 250 mm, 350 mm
Universal Milling Machine ERNAULT SOMUA HES ZHV1 Travel X : 700 mm Travel Y : 250 mm Travel Z : 350 mm Rotation : from 40 to 2000 RPM Table size : Length 1200 mm x Width 300 mm Vertical/horizontal universal swivel head Scale 3 axes EAE Rapid 3 axes Voltage380 V Width: 2000 mm Depth: 1800 mm Total height in height: 1600 mm Weight: approx 1,5 T
x-travel: 280 / 300 mmy-travel: 250 / 270 mmz-travel: 300 / 310 mmturning speeds: 45 - 2240 U/minturning speeds: 18 Stufenspindle taper ISO: 40 quill stroke: 60.0 mmtable:: 670 x 320 mmtable load: 150 kgfeed range: 12.5 - 630 mm/minfeed: 18 Stufenrapid traverse: 1.200 mm/minworkpiece weight: max. 150 kgT-slots: 5x 12 x 63 mmtotal power requirement: 1.6 kWweight of the machine ca.: 1100 kgrange L-W-H: 1265 x 1080 x 1620 mm New price ~ 25.000 Euro () Special price upon requestFeatures:- Robust electric-driven universal milling machine- ACURITE 3-axis digital display with pivoting control panel, front right including emergency stop button- Electric adjustment of all axes (X/Y/Z axes) Rapid traverse in all 3 directions- Pivoting milling spindle guard- Coolant system- Lower chip tray- Vertical milling head with quill adjustment Milling head rotation 90° Tool holder ISO / DIN 40 / 2080- Fixed ...
Key data: 700 mm, 450 mm, 450 mm
Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T
x-travel: 1000 mmy-travel: 360 mmz-travel: 400 mmspindle taper ISO: 40 ISOtable:: 1370 x 320 mmfeed:: H 80 - 830 / V 23-625 mm/min.turning speeds: H 35 - 1500 / V 45 - 1660 U/mindistance spindle /table: H 30 - 430 / V 210-610 mmrapid traverse: Z Achse 750 mm/minthroat: 305 - 805 mmT-slots: 3 x 14.0 mmtable - swivable +/-: -45 / +45 °workpiece weight: max. 300 kgcoolant pump: 25.0 L/min.total power requirement: 7.6 kWweight of the machine ca.: 1540 kgrange L-W-H: 1840 x 1830 x 2050 mm- Large rectangular guide in y and z axes- ensure increased stability- 8x automatic feeds and rapid traverse in all axes- driven by servo motor- Universal milling head system Huron, adjustable to all angular positions- Swiveling control panel with ergonomically placed switches- Heavy machine stand made of gray cast iron for vibration-free work- Very smooth running thanks to ground gears running in an oil bat ...
Inv. Num. : 8265 Type: FU 400/V/2 Producer: Heckert Generated: Parameters: Work table length: 1600 mm Work table width: 400 mm Maximum vertical spindle speed: 1400 1/min X-axis travel: 1150 mm Y-axis travel: 370 mm Z-axis travel: 430 mm Machine height: 1980 mm Machine length: 2490 mm Machine width: 2270 mm Machine weight: 3850 kg
x-travel: 1000 mmy-travel: 360 mmz-travel: 400 mmspindle taper ISO: 40 ISOtable:: 1370 x 300 mmfeed:: 30-830 / 23-625 mm/min.turning speeds: 45 - 1660 U/mindistance spindle /table: 60 - 460 mmrapid traverse: Z Achse 750 mm/minthroat: 95 - 575 mmtotal power requirement: 3.0 kWweight of the machine ca.: 1505 kgrange L-W-H: 1740 x 1860 x 1900 mm- Large rectangular guide in y and z axes- ensure increased stability- 8x automatic feeds and rapid traverse in all axes- driven by servo motor- Universal milling head system Huron, adjustable to all angular positions- Swiveling control panel with ergonomically placed switches- Heavy machine stand made of gray cast iron for vibration-free work- Very smooth running thanks to ground gears running in an oil bath- Upper arm with clearly structured gear box for the spindle speed- Digital position display for x, y and z axes included in delivery- Precisely ...
Key data: 1000 mm, 450 mm, 600 mm
Universal Milling Machine DUFOUR type F250 Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T
x-travel: 600 mmy-travel: 250 mmz-travel: 400 mmspindle taper ISO: 40 ISOtable:: 1120 x 260 mmfeed:: 24 - 402 mm/min.turning speeds: 45.0 - 1660 U/mindistance spindle /table: 175 - 520 mmrapid traverse: Z Achse 660 mm/minthroat: 0 - 550 mmtotal power requirement: 2.2 kWweight of the machine ca.: 1380 kgrange L-W-H: 1570 x 1470 x 1660 mmEquipment:- Universal milling head, adjustable to all angle positions- Swiveling control panel with ergonomically positioned switches- Heavy machine stand made of gray cast iron for vibration-free work- Dovetail guide with adjustable wedge strips in all 3 axes- Very smooth running thanks to ground gear wheels running in an oil bath- Positioning motor for z-axis included in delivery- Automatic table feed in x and y axes as standard- Precisely surface-machined cross table with T-slots- Digital position display for x, y and z axes included in deliveryScope of ...
Inv. Num. : 8185 Type: FP 3 NC Producer: Deckel Generated: Parameters: Work table length: 700 mm Work table width: 460 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 400 mm Y-axis travel: 400 mm Travel Z axis: 340 mm Machine height: 1800 mm Machine length: 2000 mm Machine width: 1400 mm Machine weight: 1900 kg
x-travel: 560 mmy-travel: 500 mmz-travel: 400 mmControl: TNC 360 spindle speed:: 40-4.000 U / mintotal power requirement: 7,5 kWweight of the machine ca.: 2,6 tdimensions of the machine ca.: 2,6 x 1,8 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
JAFO FWF 32 universal milling machine was manufactured in 1989 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine, distinguished by its high functionality, versatility and reliability, is used for precision machining of workpieces. The stable design made of high-quality cast iron has, among others, an pull-out beam and a table with a large working area. The vertical torsion spindle used can work with a wide range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32 vertical milling machine weighs 2280 kg. Technical data of the JAFO FWF 32 milling machine - work table surface (L x W): 1300 x 320 mm - distance between spindle end and work table: 430 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam - arm for removing vertical spindle - installed power: 7,1 kW - power supply: 3 ...
x-travel: 1000 mmy-travel: 600 mmz-travel: mmtotal power requirement: 2,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...
x-travel: 500 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 3 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2 x 2 x 2 mNo. 2392Universal tool milling machineHERMLE UWF 801Working area: 500 x 430 x 400 mmDrive: 3 kWControl: TNC 135With manual control: Working area 520 x 450 x 410 mm,fixed table 800 x 400 mmTool holder SK 4018 spindle speeds from 40 - 2000 1/minFeed stepless x,y 4 - 1600 mm/minz 4 - 1000 mm/minDimensions 2.3 x 2.3 x 1.7 mWeight 1350 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 600 mm, 525 mm, 500 mm
Tool Milling Machine - Universal DECKEL-MAHO DMU 60 E Machine x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm Serial no.023 Table clamping surface: 1000 x 543 mm Spindle holder: SK 40 Spindle holder: DIN 69871 Spindle speeds - infinitely variable: 20 - 12,000 rpm Feeds X/Y/Z axis: 20 - 10,000 mm/min Rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min Table load: max. 350 kg Control: HEIDENHAIN Head swivel +/-: 90 ° Total power requirement: 26 kVA Machine weight approx.: 4.2 t Machine dimensions L x W x H: 2.95 x 2.1 x 2.26 m Coolant Setup Machine was dismantled
x-travel: 700 mmy-travel: 370 mmz-travel: 350 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 2,5 x 2,5 x 2,5 mVertical milling machineSpindle ISO-40, Speed range 48-2100 1/min,feeds 10-1000 mm/min, rapid traverseSpace requirement approx. 2.5 x 2.5 m, Weight approx. 2.5 tonnes.Active digital readout Heidenhain TNC-114Table clamping surface 1000 x 400 mm,Coolant device.Working area: 700 x 370 x 350Drive: 4/5.5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table clamping surface: 440 x 1200 mm Table movement x: 950 mm Table movement y: 250 mm Table movement z: 475 mm Spindle holder: ISA 40 Spindle speeds: 40 - 1800 rpm Feeds longitudinal and transverse: 16 - 6630 mm/min Feeds vertical: 5.6 - 224 mm/min electr. Connection: 380 V, 7.5 kVA Space requirement: 2100 x 2000 x 2150 mm Weight: 2400 kg
x-travel: 1200 mmy-travel: 400 mmz-travel: 400 mmtotal power requirement: 5 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 3 x 2 x 2 mNo. 4427Universal tool milling machine DECKEL FP 4 L / 2707Working area: 1200 x 400Fixed angle tableControl: 3-axis digital displayWeight approx. 3.5 tonsSpace requirement 3 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
MAHO Milling Machine MH400 - Mounting SK40 - With digital display - Brake motor for work spindles: 2.2 kW - X-axis: 400 mm - Y-axis: 375 mm - Z-axis: 250 mm - Width: 150 cm - Depth: 120 cm - Height: 180 cm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.
x-travel: 700 mmy-travel: 450 mmz-travel: 450 mmtotal power requirement: 4 kWweight of the machine ca.: 3,3 tdimensions of the machine ca.: 2 x 3 x 3 mNo. 1859Universal tool milling machine MAHO MH 800Working area: 700 x 450 x 450Universal built-in rotary table 1050 x 627 mm,quill feed gear 0.02-0.2 mm/revSpindle ISO-40,Speed range 32-1600 1/min,feeds 5-500 mm/min, rapid traverse 1.4 (0.7) m/min.Cross table movement by hand 225 mm,Table top rotation 360°Table swivels/tiltable +- 30° each.Space requirement approx. 2 x 3 x 3 m,Weight approx. 3.3 tons.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Deckel Maho Universal Milling Machine DMU 125 P 1,250 x 880 x 800 mm Motor spindle 18,000 1/min. Tool holder SK 40 Automatic Swivel Milling Head Horizontal tool changer setup Double gripper 30 magazine slots Coolant tank 600 litres Internal cooling IKZ Form AD Conveyor Rotating viewing panel 3D path control TNC 430 NC rotary table diameter 1,250 x 1,000 mm Universal milling head with controlled B-axis Electronic handwheel Probe Infrared Heidenhain TS 631
x-travel: 400 - 1600 mmy-travel: 250 - 800 mmz-travel: 350 - 800 mmControl: CNC weight of the machine ca.: 1,6 - 16 tdimensions of the machine ca.: - mMAHO - Package from stock clearance -Special price for sale4 x milling machine-MAHO MH 400 C - CNC 432-MAHO MH 700 C - CNC 432-MAHO MH 800 T - CNC 332-MAHO MH 1600 S - CNC 432EXW - Ex works Bensheim / LorschFree lorry The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hello Ms. Bader, for sale is a used, fully functional milling machine of the brand - Schaublin 53 incl. accessories.
x-travel: - mmy-travel: - mmz-travel: - mmtotal power requirement: - kWweight of the machine ca.: 1,3 tdimensions of the machine ca.: 1,51,52 mNo. 2510Universal milling machine Bridgeport ( type/design )Working area: table 1300 x 305Angle milling head with additional angle milling attachment and separate drive motor.Horizontal spindle MK-4,speed range 26-630 min-1,Angular milling head speed range 225 - 3385 min-1Feed range x/y 8.4-224 mm/min, z 3.1-85 mm/min.Space requirement approx. 1.5 x 1.5 m,Weight approx. 1300 kg.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dear Ladies and Gentlemen, the machine has not run much, it has been treated with care and is fully functional.
x-travel: 550 mmy-travel: 350 mmz-travel: 400 mmtable surface area: 1130x330 mmnumber of T-slots: 5 T-slot - width: 14 mmH8T - slots distance: 63 mmnumber of tools: SK 40 quill stroke: 80 mmmilling-head swivable +/-: 180° total power requirement: kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this a ...
Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise
x-travel: 500 mmy-travel: 360 mmz-travel: 420 mmcontrol: Heidenhain 355 handwheel: tool taper: SK 40 weight of the machine ca.: 1,7 tPlease note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 24103 Specifications: - Working range of the axes - X / Y / Z 450 / 400 / 420 mm - Table size 850 x 250 mm - Max. distance from spindle to table 400 mm - Working spindle speeds horizontal 30 - 1275 rpm - Working spindle speeds vertical 66 - 2840 rpm - Feeds X – Y and Z axis - Rapid traverse - Drive 400 V / 3.2 kW - Space requirement approx. W 1400 x H 1800 x D 1400 mm - Weight approx. 1400 kg
x-travel: 3000 mmy-travel: 2500 mmz-travel: 1150 mmControl: 840 D Powerline tool taper: HSK-A63 table-size: 3000 x 2500 mmturning speeds: 16000 U/mintotal power requirement: 60 kWweight of the machine ca.: 50 tdimensions of the machine ca.: m- 5-Axis-Fräsmachine- max. rpm: 16.000- X-Way: 3000 mm- Y-Weg: 2500 mm- Z-Way: 1150 mm- A-Axis: +/- : 100 mm- C-Axis: +/- : 181,5 mm- Tabelsize: 3000 mm x 2500 mm- option: Blowing air outside- kinematics: ClevisThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 500 mm, 400 mm, 300 mm
Year of manufacture 1985 with CNC control 432 The machine is in good condition, the second machine is available as spare part machine Two identical machines available !
x-travel: 1000 mmy-travel: 700 mmz-travel: 600 mmControl: CNC feed stepless: 2-4000 total power requirement: 20 kWweight of the machine ca.: 7 tdimensions of the machine ca.: 7 lmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Table size mm 320×1320 Table turning (left – right) degree 45° Travels, X/Y/Z mm 950/320/460 Spindle taper ISO 50 Number of speeds 18 Spindle speed range rpm 40÷2000 Longitudinal and cross feeds range mm/min 12,5÷630 Vertical feeds range mm/min 5÷262 Main motor power kW 7,5 Overall dimensions mm 1747×2050×1780 Weight kg 2850
x-travel: 710 mmy-travel: 600 mmz-travel: 455 mmControl: Dialog 4 turning speeds: 6300 U/mintool taper: SK40 quill stroke: 80 mmtable-size: 550 x 1000 mmtable load: 0,6 ttotal power requirement: kWweight of the machine ca.: 4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Universal milling and drilling machine KUNZMANN WUF5/3 with Heidenhain ND 780 Built in 1989 in good condition. Technical data WUF5/3: Position indicator Heidenhain ND 780 The ND 780 position indicator is particularly suitable for use on milling, drilling and turning machines with up to three axes. Router table: Clamping surface 850x350 mm Clamping grooves 5 Groove width 14H7 mm Groove spacing 63 mm Workspace: Longitudinal (X-axis) 490 mm Transverse (Y-axis) 310 mm Vertical (Z-axis) 400 mm Max. distances: Top of the table up to Horizontal spindle centre 40 – 420 mm Top of the table up to Vertical head lower edge 350 mm Milling spindle: Tool holder SK40 Horizontal speeds 40 – 2500 min-1 Vertical speeds 40 – 2500 min-1 Quill stroke 60 mm Vertical head can be swivelled on both sides + - 90° Feed rate 1000 mm/min Rapid traverse 4000 mm/m ...
x-travel: 500 mmy-travel: 350 mmz-travel: 380 mmtable-size: 790x360 mmspindle turning speed range: 63-4000 U/minspindle taper ISO: 40 quill stroke: 50 mmrange L-W-H: 1600x2000x1850 mmdigital readout: PHILIPS weight of the machine ca.: 1.4 tActive Digital read outMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 300 mm, 350 mm, 200 mm
Travel of the axles: X: 300 mm Y: 350 mm Z: 200 mm Weight: approx. 800 kg
x-travel: 1600 mmy-travel: 920 mmz-travel: 900 mmtable surface area: 1800x700 mmT-slot - distance: 120 mmTable load: 3000 kgspindle taper ISO: 50 power capacity: 22/30 kWspindle turning speed range: 60-3000 U/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mAbout usmore than 400 machines in the warehouse over 12000 m² storage area,crane capacity 70 tmore than 1000 items accessories for your workshopYou wantto sell machines production lines or your company, then talk to us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Knuth UFM 2 Universal Milling Machine Specifications X-axis travel (manual) 800 mm X-axis travel 750 mm travel Y-axis 300 mm travel Z-axis 400 mm Table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45° Cone of the SK 50 horizontal spindle Drive Main engine power 4 kW Motor power in the Z-axis 0.75 kW Feed motor power 0.55 kW Cooling pump motor 0.09 kW Coolant pump capacity 25 l/min Dimensions and weight Dimensions: 1900x1720x1750 mm Weight 2100 kg More items - new and used - can be found in our shop! International shipping costs on request!
x-travel: 400 - 800 mmy-travel: 200 - 400 mmz-travel: 200 - 400 mmtotal power requirement: 3 kWweight of the machine ca.: ? tdimensions of the machine ca.: ? mShort-term free from current operational resolutionUntested, wear and tear due to age and usePrice EXW / ex foundation Machine package3 x Bridgeport1 x Bridgeport design1 x Kunzmann2 x Fritz Werner1 x DETOMBAY2 x ReckermannThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lid FP4A Id No. 2284-0242 CNC 2301 control x 560 y 500 Z 450 Weight 2.2 t Hydraulic Data Machine has a malfunction in the startup procedure !
x-travel: - mmy-travel: - mmz-travel: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
EUROMETAL FU-32B universal milling machine was built in 2008 in Poland. The process of precision machining of workpieces is performed on a large work table with a length of 1320 mm and a width of 315 mm using a highly efficient spindle rotating at a maximum speed of 1800 rpm. The total weight of the EUROMETAL FU 32B machine is 2100 kg. Technical data of EUROMETAL FU-32B milling machine - work table dimensions (L x W): 1320 x 315 mm - feed rate in the X/Y axis: 850/235 mm - spindle rotational speed: 1800 rpm - distance between spindle axis and table: 400 mm - spindle drive motor power: 5.5 kW - feed drive motor power: 1.5 kW - dimensions (L x W x H): 2000 x 1474 x 2080 mm - EUROMETAL FU32B machine weight: 2100 kg
x-travel: 800 y-travel: 650 mmz-travel: 542 mmControl: Heidenhain type: TNC 426 table surface area: 800x600 mmc-axis: 1/1000 °table - tiltable: 45 Gradswing dia.: 1200 mmspindle taper ISO: 40 turning speeds: 0-5000 U/minTool changer: 30 Pos: chip conveyor: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
