: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 €: 555.81 €: 100 mm: 500 mm: 1200 mm: 850 mm: 480 kg: 43 cm³: 100 x 6 mm: 3 1/2 x 4 mm: 100 x 6 mm: 100 x 3,6 mm: 100 x 3,6 mm: 114,3 x 6,3 mm: 114,3 x 6,3 mm: 114,4 x 6,3 mm: 88,9 x 3,65 mm: 100 x 5 mm: 70 mm: 100 x 25 stehend, 100 x 5 mm: 400 mm: 36 mm: 10 mm: 0 - 1,3 U/min: 3.5 kWquick-change tooling systemdigital display of bendmaterial spring back compensationremote control of bend, return and emergency stop functionsaccurate counterbending die positioningfootswitch3 hexagonal tool holdersheavy-duty steel gear caseusers manaultools not included, prices on requestThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS CNC controls BLM VGP 3D TECHNICAL SPECIFICATION Max. diameter of tube: 28 mm Max. wall thickness: 1.5 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 3400 mm space requirements -front/back-: 1100 mm total height: 1500 mm total weight approx.: 1850 kgStainless steel max. 20 mm diameterCNC control with VGP 3D software
CONTROLS CNC controls BLM VGP 3D TECHNICAL SPECIFICATION Max. diameter of tube: 40 mm Max. wall thickness: 2 mmDIMENSIONS / WEIGHTS space requirements -left/right-: 4500 mm space requirements -front/back-: 2150 mm total height: 1800 mm total weight approx.: 4800 kgLoadingstation AL42max. 2300 mm, min. 500 mm, 150 kg
: R10-R260 bending speed: 2,5 U/min: 54,0 x 2 mmSheet thickness aluminum: 54,0 x 2 mm: 42,4 x 3 mmsheet thickness for stainless steel: 42,4 x 2 mm: 30 mm: einphasig - 230 Vdrive motor: 1,5 kWweight of the machine ca.: 80 kgdimensions of the machine ca.: 363 x 900 x 595 mm‘ERCOLINA MEDI BENDER’Single-phase mandrel-less bending machine up to 42 mmFeatures:- Control system: Soft-touch control panel in 8 different languages- Number of programs: 30, each with 9 bends- Standard accessories (including foot switch, user manual)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 6 - 42 mmwall strength: 3 mmbending radius min.: 180 mmbending radius max.: 5 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: mEquipment:Saw unitNotching unitDeburring unit for internal and external edgesFlaring unit / flaring function (necking / expanding)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 42.0 x 3.0 STAHL mmtube diameter: 30.0 x 2.0 EDELST mmbending angle max.: 180 °bending radius max.: 100 mmbending speed: 2.0 U/min.Control: NC voltage: 400 Vtotal power requirement: 0.55 kWweight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine baseDescription:- NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored- Automatically returns to the starting position- Maximum bending capacity for 42 x 3.0 mm steel tubes- Excellent bending quality with very tight bending radii (from 2x tube diameter). and bending angles between 0° and 180°- Easy operation- High accuracy and reliability- Quick tool change (within seconds)- Easy to transport- Includes machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 60.3 x 4.5 mm STtube diameter: 60.3 x 5.4 mm ALUtube diameter: 2 x 3.91 mm GASbar material - diameter: 35.0 mmrevolutions per minute: 2.0 U/minbending radius min.: 10.0 mmbending radius max.: 270 mmexternal diameter: min. 5.0 mmexternal diameter: min. 1/8 Zollvoltage: 230 Vtotal power requirement: 1.5 kWweight: 76.0 kgrange L-W-H: 302 x 243 x 674 mmEquipment:- mandrel-less tube bending machine- Model M = ELECTRO-HYDRAULIC SINGLE-PHASE- high performance and compact design- completely hydraulic machine- bends 210° without the need to catch up- no electronic control- Ercolina patent n. 102017000142179- control of the bending angle via adjustable angle scale- mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 273 mmwall strength: 15,1 mmbending radius min.: 150 mmbending radius max.: 1250 mmtotal power requirement: 30 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
gasleiding: Ø50 x 3,91 mm stalen buis: Ø60 x 3 mm roestvrijstalen buis: Ø60 x 2 mm koper/alu buis: Ø64 x 4 mm massieve staaf: Ø35 mm massieve rechthoekige staaf: 60 x 10 mm vlakke staaf (hard): 60 x 16 mm platte staaf (gemakkelijk): 60 x 30 mm doosdoorsnede: 60 x 30 x 4 mm maximale straal: 200 mm buigsnelheid: 1,25 amp; 2,5 rpm video klik hierLength: 900 mm Depth: 400 mm Height: 1100 mm Weight: 140 kg
tube diameter: 48,3 mmwall strength: 3,25 mmbending radius min.: max. 180 mmBending speed: 20 °/sectotal power requirement: 2,4 kWweight of the machine ca.: 700 tdimensions of the machine ca.: 3880 x 800 x 1250 mDescription:Round tube steel (S235): 60.0 x 6.0 mmRound tube stainless steel (S 355): 60.0 x 4.0 mmSquare tube steel: 50 x 50 x 4.0 mmRectangular tube steel: 60 x 40 x 2.0 mmmax. usable length: 3048 mmBending speed: 10°/secincluding tools (see photos)Mandrel is no longer available, can be retrofittedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 10.0 - 60.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 64.0 mm CU/Aluwall strength: 4.0 mmrevolutions per minute: 1.25 - 2.50 U/minbar material - diameter: 35.0 mmvoltage: 400 VoltControl: ISITAN NC total power requirement: 2.0 kWweight: 140 kgrange L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 60.0 x 3.0 mm- Gas tube capacity: 2 Gas x 3.91 mm- Square profile capacity (FE 42) 60 x 30 x 4.0 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasEquipment:- ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each- Patented quick tool change system- Continuously adjustable bending speed- One bending speed- 1 free-floating foot switch- 1 bending tool set included Additional segments available upon reque ...
tube diameter: 10.0 - 42.0 mm Stahlwall strength: 3.0 mm Stahltube diameter: 54.0 mm CU/Aluwall strength: 2.0 mmbar material - diameter: 30.0 mmrevolutions per minute: 1.30 U/minvoltage: 400 Volttotal power requirement: 1.5 kWweight: 110 kgrange L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request- Steel tube capacity: 42.0 x 3.56 mm- Gas tube capacity: 1 1/4 Gas x 3.5 mm- Square profile capacity (FE 42) 40 x 20 x 2.6 mm- Max. bending radius: 200 mm- Minimum radius: 2 x D- Hexagonal tool holder- Min. outer diameter: 5 mm - 1/8 GasFeatures:- Patented quick tool change system- One bending speed- Digital machine display- 1x freely movable foot switch- 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holderThe data for this ad was created with ModulMWS - the software solution of Log ...
tube diameter: 33,7 x 3,4 GAS mmtube diameter: 35,0 x 2,5 STAHL mmtube diameter: 35,0 x 1,5 EDELST mmbending radius min.: R10 - R 190 mmbending angle max.: 0 - 180 °tool taper: 6-kant 40 mmvoltage: 230 Vtotal power requirement: 0,9 kWweight of the machine ca.: 23,0 kgDescription:- MediBender 070 digital- with maximum bending performance for 35 x 2.5 mm steel tubes- Excellent bending quality with very tight bending radii. (from 2 x tube diameter) and bending angles between 0° and 180°- Easy to operate- High accuracy and reliability- Fast tool changes (within seconds)- Easy to transport- Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 1/2 - 2.0 Zollwall strength: 2.75 - 4.5 mm STpressure: 10.0 tweight of the machine ca.: 46.0 kgWith a hinged bending frame for efficient work- Various bending dies included- Universally applicable for gas, boiler, and water pipes- Fast work thanks to rapid feed- With a tripod stand for safe work- Also ideal for copper and coated pipes- Bends up to 90° can be createdFeatures:- Bending dies: ½ - ¾ - 1 - 1 ¼ - 1 ½ - 2The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: ? mmwall strength: ? mmbending radius min.: ? mmroll diameter: div. ca. 100 - 240 mmroll diameter - bore: 60 mmShipping weight: 950 kgPacking: 1,20,80,6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 12-54 mm (Kupfer / Edels. mmserial number: EBD 022 99 002 mode of operation: Schneiden/ Entgraden / Re speed: Rollen 450 U/min m/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: bis 60 mmweight of the machine ca.: 1,8 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 4-20 mmwall strength: 2 mmbending radius min.: 10 mmbending radius max.: 75 mmbending speed: 35 mm/minpull up length of tube: 2000 mmControl: total power requirement: 7,5 kWweight of the machine ca.: 1,1 tdimensions: ca. 3100x1000x1400 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 100 mmroll diameter: 315 mmbending speed: 5 m/minbending capacity - flat iron: max. 12 x 20 mm: 75 mmDrive: 11 kWweight: 2.600 kgrange L-W-H: 1950x1600x2100 mmEquipment / Accessories:- Two driven rollers- Hydraulic delivery of the upper roller- Digital display with memory function- Working position horizontal and vertical- Bearings with tapered roller bearings- Use of replaceable slide rails on the guide carriage- Footswitch- standard roller setThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 60x3 mm: 60x3 mm: 35 mm: 64x4 mm: max. 210 °: R10-R300 bending speed: 1,25/2,5 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 130 kgdimensions of the machine ca.: 595x363x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 350 mm: 110 mmbending speed: 1-5 m/minBending capacity: 157 Wcm³total power requirement: 7,5 kWweight of the machine ca.: 2950 kgDomestic equipments:- Direct drive of all three shafts- Single delivery of the side rollers- Horizontally and vertically usable- Hydraulically movable side rectifier (via control panel)- 2 digital displays for the feed rollers- Hardened rollers- Mobile control panelThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
