Injection molding machines used for sale (408)

Screw diameter: 50 mm Injectable volume: 422 cm3 Passage between columns: 560 x 510 Moulded thickness: minimum: 200mm- max: 600 mm Opening stroke: 600 mm

Ref. no.: 18627Manufacturer: BATTENFELDYear of construction: 2007Clamping unitClamping force: 100 tonOpening stroke: 500 mmDistance between tie bars: 470 x 420 mmMould height min.: 250 mmInjection unitScrew diameter: 22 + 14 mmInjection volume: 47 +13 cm³Shot weight: 45 + 12 gInjection pressure: 2860 + 3000 barMeasurements and weightDimensions: 4,1 x 1,5 x 2,4 mMachine weight: 5000 kgFurther information:2K Co-Injection Moulding MachineThis machine from the prestigious Austrian manufacturer Battenfeld is a 2007 horizontal injection moulding machine with 100 tonnes clamping force and a special Co-Injection (Sandwich Injection) configuration.How Does Co-Injection Work?The two injection units do not operate independently — they meet inside a combined nozzle. First, Unit A injects: the first material adheres to the mould wall and forms the outer skin. Then Unit B follows: the second materi ...

Screw diameter: 65 mm Injectable volume: 1138 cm3 Column passage: 710 x 630 mm Moulded thickness: minimum: 250 mm- maximum: 750mm Opening stroke: 750 mm Robot interface: E67 Blow Guns

Ref. no.: 18612Manufacturer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 22 mmInjection volume: 39 cm³Shot weight: 35 gInjection pressure: 2500 barMeasurements and weightDimensions: 4,3 x1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramaticall ...

Screw diameter: 70 mm Injectable volume: 1077 cm3 Injection pressure: 2423 bar Passage between columns: 720 x 720 Moulded thickness: minimum: 450mm- max: 750 Opening stroke: 700 mm Number Of Cores :2

Ref. no.: 18613Manufacturer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 30 mmInjection volume: 74 cm³Shot weight: 60 gInjection pressure: 1390 barMeasurements and weightDimensions: 4,3 x1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramaticall ...

Screw diameter: 110 mm Injectable volume: 4847cm3 Injection pressure: 1892 bar Column passage: 1270 x 1100 mm Moulded thickness: minimum: 500mm- max: 1200 mm Number Of Cores :4 Robot interface: E67 Servo motor

Ref. no.: 18614Manufacturer: DEMAGYear of construction: 2006Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 18 mmInjection volume: 26 cm³Shot weight: 23 gInjection pressure: 2800 barMeasurements and weightDimensions: 4,3 x1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramaticall ...

Screw diameter: 55 mm double thread Injectable volume: 582 cm3 Injection pressure: 2200 Column passage: 780 x 780 mm Moulded thickness: minimum: 760mm- maximum: 1190 mm Opening stroke: 760 mm Number Of Cores :2 Robot interface: E67 36 heated zones

Ref. no.: 18615Manufacturer: DEMAGYear of construction: 2007Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 25 mmInjection volume: 51 cm³Shot weight: 45 gInjection pressure: 2000 barMeasurements and weightDimensions: 4,3 x 1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatical ...

Screw diameter: 90 mm Injectable volume: 2862 cm3 Injection Pressure: 1472 Column passage: 1100 x 1100 mm Moulded thickness: minimum: 450mm- max: 1200 Opening stroke: 1200 mm Number Of Cores :0 Robot interface: E12 28 heated zones

Ref. no.: 18616Manufacturer: DEMAGYear of construction: 2007Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 25 mmInjection volume: 51 cm³Shot weight: 45 gInjection pressure: 2000 barMeasurements and weightDimensions: 4,3 x 1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatical ...

Screw diameter: 75 mm Injectable volume: 1657 cm3 Injection pressure: 2121 bar Column passage: 820 x 820 mm Moulded thickness: minimum: 300mm- max: 850 mm Opening stroke: 950 mm Number Of Cores :3 Robot interface: E12

Ref. no.: 18617Manufacturer: DEMAGYear of construction: 2007Clamping unitClamping force: 80 tonOpening stroke: 340 mmDistance between tie bars: 370 x 370 mmMould height min.: 150 mmInjection unitScrew diameter: 25 mmInjection volume: 51 cm³Shot weight: 45 gInjection pressure: 2000 barMeasurements and weightDimensions: 4,3 x 1,3 x 2,3 mMachine weight: 4750 kgFurther information:A Technology That Stands Out in Energy Efficiency: Less Energy, Higher PrecisionThe Demag IntElect series is one of the pioneering machines that introduced all-electric drive technology to the plastic injection moulding industry in the late 2000s. Unlike conventional hydraulic systems where pumps and cooling circuits run continuously, the IntElects servo drive only activates when movement is actually required. This fundamental difference delivers 50 – 70% energy savings compared to hydraulic machines, dramatical ...

Key data: 4000 kN

Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...

Ref. no.: 18625Manufacturer: WITTMANN BATTENFELDYear of construction: 2011Clamping unitClamping force: 110 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 450 mmPlaten size (h x v): 680 x 663 mmInjection unitScrew diameter: 30 mmInjection volume: 88 cm³Shot weight: 80 gInjection pressure: 1471 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 4600 kgFurther information:Wittmann Battenfeld EcoPower series represents high-efficiency all-electric injection moulding technology designed for precision production and stable processing performance.All major machine movements are driven by servo electric motors. Injection, dosing, clamping and ejector movements are performed completely electrically, ensuring extremely precise motion control, excellent repeatability and stable production quality.Compared to conventio ...

Key data: 3200 kN

Arburg 1500T 3200-1300 e² / Hybrid machine with a turntable Year of Make: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Spar spacing: 0x0 mm Size of the clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Very precise rotary table, driven by a servo motor, controlled by an inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment ...

Ref. no.: 18623Manufacturer: WITTMANN BATTENFELDYear of construction: 2010Clamping unitClamping force: 180 tonOpening stroke: 480 mmDistance between tie bars: 570 x 520 mmMould height min.: 225 mmMould height max.: 550 mmPlaten size (h x v): 810 x 805 mmInjection unitScrew diameter: 30 mmInjection volume: 124 cm³Shot weight: 120 gInjection pressure: 2823 barMeasurements and weightDimensions: 4,8 x 1,6 x 2,2 mMachine weight: 6800 kgFurther information:Die Wittmann Battenfeld EcoPower Serie steht für hocheffiziente vollelektrische Spritzgießtechnologie, entwickelt für präzise Produktionsprozesse und stabile Fertigungsbedingungen.Alle Hauptbewegungen der Maschine werden durch Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Schließen und Auswerfen erfolgen vollständig elektrisch und ermöglichen dadurch eine äußerst präzise Bewegungssteuerung, hohe Wiederholgenauigkeit und ...

Key data: 2500 kN

Arburg 630S 2500-1300 ECO / Production line with the Sepro Industrial Robot SDR 22S Year of Make: 2008 Injection unit: Screw diameter: 55 mm Injection weight: 521 g Spray pressure: 2380 bar Dosing volume: 570 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 15 Hardened injection unit - Bimetal Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) ECO – the machine has a system for adjusting the minimum tool height Robot - Sepro Industrial Robot SDR 22S Year of Make: 2016 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-150 ...

Ref. no.: 18624Manufacturer: WITTMANN BATTENFELDYear of construction: 2010Clamping unitClamping force: 180 tonOpening stroke: 480 mmDistance between tie bars: 570 x 520 mmMould height min.: 225 mmMould height max.: 550 mmPlaten size (h x v): 810 x 805 mmInjection unitScrew diameter: 35 mmInjection volume: 168 cm³Shot weight: 163 gInjection pressure: 2083 barMeasurements and weightDimensions: 5,2 x 1,6 x 2,2 mMachine weight: 6800 kgFurther information:Die Wittmann Battenfeld EcoPower Serie steht für hocheffiziente vollelektrische Spritzgießtechnologie, entwickelt für präzise Produktionsprozesse und stabile Fertigungsbedingungen.Alle Hauptbewegungen der Maschine werden durch Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Schließen und Auswerfen erfolgen vollständig elektrisch und ermöglichen dadurch eine äußerst präzise Bewegungssteuerung, hohe Wiederholgenauigkeit und ...

Key data: 2200 kN

Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...

Ref. no.: 18621Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 35 mmInjection volume: 115 cm³Shot weight: 103 gInjection pressure: 1600 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgFurther information:The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion cont ...

Key data: 2000 kN

Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine o ...

Ref. no.: 18622Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 35 mmInjection volume: 115 cm³Shot weight: 103 gInjection pressure: 1600 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgAdditional information & extrasCore pull: 1 pcsFurther information:The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive tec ...

Key data: 1600 kN

Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) The machine has a servo motor built into the injection unit, which is responsible for dosing the pla ...

Ref. no.: 18610Manufacturer: DEMAGYear of construction: 2012Clamping unitClamping force: 160 tonOpening stroke: 495 mmDistance between tie bars: 520 x 520 mmMould height min.: 275 mmMould height max.: 585 mmPlaten size (h x v): 760 x 785 mmInjection unitScrew diameter: 35 mmInjection volume: 156 cm³Shot weight: 139 gInjection pressure: 2180 barMeasurements and weightDimensions: 5,4 x 1,5 x 2,1 mMachine weight: 7600 kgFurther information:The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive technology, ensuring extremely precise motion cont ...

Key data: 1600 kN

Arburg 520S 1600-290/100 / Production line with the Wittmann W823 robot / Operating hours: 20,181 h in automatic mode Year of manufacture: 09.2011 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 20,181 h in automatic mode Total number of operating hours: 28,473 h Euromap 67 Robot interface Air Valve x 3 Hydraulic, needle-core pull, controlled by a proportional valve x 2 Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying Machine with two cylinders / bat ...

Ref. no.: 18619Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 30 mmInjection volume: 85 cm³Shot weight: 76 gInjection pressure: 2180 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgFurther information:Die Sumitomo (SHI) Demag IntElect Serie gehört zu den hochpräzisen vollelektrischen Spritzgießmaschinen, die speziell für technische Kunststoffteile, Automobilanwendungen, elektronische Komponenten sowie anspruchsvolle Serienproduktionen entwickelt wurden.Alle Hauptbewegungen der Maschine werden über Direct-Drive Servo-Elektromotoren angetrieben. Einspritzen, Dosieren, Werkzeugbewegungen sowie Auswerferfunktionen erfolgen vollständig elektrisch und e ...

Key data: 1500 kN

Arburg 520H 1500-290 e² / Hybrid machine / Production line with the Wittmann W818 side robot / Operating hours: 21,588 h in automatic mode Year of manufacture: 05.2016 Injection unit: Screw diameter: 30 mm Injection weight: 97 g Spray pressure: 2500 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 21,588 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Core train control Air Core Pull x 3 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which  ...

Ref. no.: 18620Manufacturer: DEMAGYear of construction: 2008Clamping unitClamping force: 100 tonOpening stroke: 380 mmDistance between tie bars: 470 x 420 mmMould height min.: 200 mmMould height max.: 430 mmPlaten size (h x v): 690 x 620 mmInjection unitScrew diameter: 30 mmInjection volume: 85 cm³Shot weight: 76 gInjection pressure: 2180 barMeasurements and weightDimensions: 4,8 x 1,4 x 2,2 mMachine weight: 5500 kgAdditional information & extrasCore pull: 1 pcsFurther information:The Sumitomo (SHI) Demag IntElect series is a high-precision all-electric injection moulding machine platform developed for technical plastic parts, automotive applications, electronic components, and demanding serial production processes.All main machine movements are driven by direct-drive servo electric motors. Injection, dosing, clamping, and ejector movements are performed entirely by electric drive techn ...

Key data: 1500 kN

Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Injection unit: Screw diameter: 55 mm Injection weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubric ...

Ref. no.: 18597Manufacturer: ENGELYear of construction: 2007Clamping unitClamping force: 70 tonOpening stroke: 305 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2381 barMeasurements and weightDimensions: 4,0 x 1,8 x 2,5 mMachine weight: 5600 kgFurther information:The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries.One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production bec ...

Key data: 1500 kN

Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Year of manufacture: 04.2012 Injection unit: Screw diameter: 55 mm Injection weight: 434 g Spray pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Control with air valve Core train control Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubricatio ...

Ref. no.: 17540Manufacturer: ARBURGYear of construction: 1994Clamping unitClamping force: 50 tonOpening stroke: 350 mmDistance between tie bars: 270 X 270 mmMould height min.: 200 mmPlaten size (h x v): 405 X405 mmInjection unitScrew diameter: 25 mmInjection volume: 67 cm³Shot weight: 61 gInjection pressure: 2500 barMeasurements and weightDimensions: 3,3 X 1,5 X 2,0 mMachine weight: 2400 kgFurther information:Laboratory Machine with Exceptionally Low Operating HoursThe offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes.The control system shows only approximately 100 operating hours and just 867 machine cycles.The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control u ...

WITTMANN SPRUE WP80 X-100 Y-700 Z-90 ROBOT

Ref. no.: 18587Manufacturer: FERROMATIK MILACRONYear of construction: 2001Clamping unitClamping force: 200 tonOpening stroke: 750 mmDistance between tie bars: 560 x 560 mmMould height min.: 300 mmOpening width: 1050 mmPlaten size (h x v): 830 x 830 mmInjection unitScrew diameter: 50 mmInjection volume: 441 cm³Shot weight: 395 gInjection pressure: 2268 barMeasurements and weightDimensions: 6,9 x 2,0 x 2,6 mMachine weight: 13000 kgFurther information:FERROMATIK MILACRON K-TEC 200S – Developed for High-Speed Thin-Wall ProductionThe FERROMATIK MILACRON K-TEC series was specially developed for thin-wall products, high-speed cycles and precision injection moulding applications.One of the most important features of this machine is its nitrogen-supported hydraulic accumulator system. This technology enables extremely high injection speeds and ensures fast and balanced mould filling, especiall ...

WITTMANN SPRUE WP80 X-100 Y-700 Z-90

Ref. no.: 18494Manufacturer: ENGELYear of construction: 2013Clamping unitClamping force: 50 tonOpening stroke: 400 mmMould height min.: 200 mmOpening width: 600 mmPlaten size (h x v): 500 X 450 mmInjection unitScrew diameter: 25 mmInjection volume: 69 cm³Shot weight: 62 gInjection pressure: 2400 barMeasurements and weightDimensions: 3,4 x 1,3 x 1,8 mMachine weight: 2900 kgAdditional information & extrasCore pull: 1 pcsFurther information:ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding MachineFor sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production.Key Advantages:Tie-barless design → maximum mould accessibilitySPEX special configuration → optimized for specific applicationsHigh precision & repeatabilityEnergy- ...

Screw diameter: 93 mm Injectable volume / Shot volume: 3138 cm3 Injection pressure : 1912 bar Column passage / Bettween tie bar: 950 x 850 mm Mold Thickness /Tickness tie bar: 300-1000 mm Opening stroke: 930 mm Ejection stroke: 350 mm 2 cores / 2 corepulling 2 blow guns / 2 air valves Robot interface

Ref. no.: 18643Manufacturer: ARBURGYear of construction: 2008Clamping unitClamping force: 150 tonOpening stroke: 500 mmDistance between tie bars: 470 x 470 mmMould height min.: 250 mmOpening width: 750 mmInjection unitScrew diameter: 35 mmInjection volume: 154 cm³Shot weight: 141 gInjection pressure: 2500 barMeasurements and weightDimensions: 4,6 x 1,6 x 2,1 mMachine weight: 4850 kgAdditional information & extrasCore pull: 1 pcsFurther information:Communication card for ProSeS interface is available (OPC-UA).Robot interface is available (EUROMAP 67).he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability.The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality stan ...

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Injection moulding machine for food and beverages caps

Screw diameter: 110 mm Injectable volume / Shot volume: 5160 cm3 Injectable weight / Shot weight: 4700 g Injection pressure: 1620 bar Passage between columns / Bettween tie bar: 950 x 1100 mm Mold Thickness /Tickness tie bar: 400-1100 mm Opening stroke: 1080 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

Clamping Force: 300 ton // Shot Weight (Max): 476 g

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

Clamping Force: 150 ton // Mould Height (Max): 730 mm

B&A REF:  9302 TON: 270 SCREW DIAMETER:  55MM SHOT WEIGHT: 594 STROKE VOLUME:  653CM3 INJECTION PRESSURE:  2041AR PLATEN SIZES: 940 X 940MM DBTB: 630 X 630MM MIN MOULD HEIGHT:  250MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE:  600MM MAX DAYLIGHT:  1250MM EJECTOR STROKE:  200MM CONTROLS: UNILOG B4 CORE PULLING: 2 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY:  18.2KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

Clamping Force: 200 ton

B&A REF:  9307 TON: 1100 SCREW DIAMETER:  105MM SHOT WEIGHT: 3075 STROKE VOLUME:  3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES:  1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT:  600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE:  1800MM MAX DAYLIGHT:  2400MM EJECTOR STROKE:  300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

Clamping Force: 350 ton // Shot Weight (Max): 694 g