used Edge gluing machines for sale

Description: Max. edge thickness 30 mm Max. forward feed speed 20 m/min Pressure with rubber belt Panel support guides , with positioning by NC , NO. PANEL SIZING / MILLING UNITS 1 Unit : pre-milling unit Constructor model : 08.376 automatic timed intervention , motor power : 3 KW r.p.m. : 12000 RPM Edge coil magazine glue pot for EVA hot melt glue premelter for EVA hot melt glue no. pressure roller 9 with positioning by NC , NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 1.85 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 1 KW r.p.m. : 11500 RPM NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 with positioning by NC , motor  ...

Technical details: - Premilling Unit - Corner Rounding Unit - Max feed speed: 30 m/min - Max panel thickness: 60 mm - Operating Units: 8

Edge height max. 65 mm Edge thickness max. 20 mm Strip cross-section max. 20 x 55 mm Fixed workpiece protrusion in post-processing incl. Edge material 38 mm (max. edge thickness 8 mm) In the case of strips or edge thickness > 8 mm, the output is in of post-processing 30 mm + strip thickness Post-processing is then only possible with the following units: possible: cross-cut and milling unit 08.055 and grinding unit Feed speed 6 - 30 m/min. Roller support rail extendable up to 700 mm Machine length 9,300 mm IMATRONIC 121/01 with system software for operating the Edge banding machine Compact PC in industrial design Electronic height adjustment of the upper pressure Inlet ruler axis-controlled Milling unit 08.376 with 2 motors of 4.5 kW each, in the Working in sync or counter rotation Infrared emitters for workpiece edge preheating Gluing unit 283.151 ...

Technical data (subject to change): Machine: Constant workpiece output from the chain path: 38 mm (incl. edge at edge thicknesses 0.3 - 3 mm) min. throughput width: 65 mm with a maximum workpiece thickness of 25 mm min. workpiece length in feed direction: 150 mm Basic height (upper edge chain track): 960 mm Workpiece: min. workpiece length: 150 mm min. workpiece width: 65 mm min. workpiece thickness: 8 mm workpiece thickness: 40 mm (with copy function) workpiece thickness: 60 mm (without copy function) Smallest workpiece: 150 mm x 150 mm, or 65 mm x 300 mm Lateral protruding coating material: 0 mm Edge material: paper, plastic and veneer min. height: 14 mm height: 65 mm Roll material: min. thickness 0.3 mm thickness 3.0 mm Veneer edges limited possible up to 1.0 mm cross-section 130 mm² min edge length 160 mm upper edge protrusion: 5 mm Equipment: - Drive fo ...

Description: Max. panel height 60 mm Min. panel length 130 mm Min. panel width 65 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Pressure with rubber belt No. Panel Sizing / Milling units , Unit : pre-milling unit Constructor model : R3 L20 motor power : 4 KW r.p.m. : 9000 RPM Lamps to preheat the side of the panel , Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for PUR glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units 10 Processing Unit : end trimming Constructor model : 8,42/39/B no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 Processing Unit : Corner rounding Constructor model : 08.342 Processing Unit : edge scraping Processing Unit : belt sanding Constructor model : 08.62 Processing Unit : belt sanding Const ...

Description: High-perfomance Edegbanding machine with PU-gluing and return conveying system. Worked only for approx. 1 year in single-shift workshop: infeed area with long infeed fence, 5-roller infeed unit and squared infeed table (500 x 500 mm) with controlled fence. Spraying unit for separating agent top/bottom. per-milling unit 2 x 4,5 kW ,incl. horizontal positioning controlled gluing unit with PUR-pre-melter BALTI Dual Pur. 2 times automatic glue-quantity dosing. 6-roll pressure zine, per-heating table pre-milling unit for premilling of edge projection on the top side snipping unit 2 x 600 W with automatic lateral scanning and pneumatic inclination 0 and 25° rough trimming unit 2 x 1,85 kW with HSK-25 retainer corner rounding unit KFA x30 - 0,5 kW mit HSK retainer multi profile scraping unit flat scraping unit buffing unit return conveying system Feddback 100 for max. workpie ...

Tabletop unit for pre-coated edges. With hot air gun 230 volts and roller separator cap. With hand edge cutter to cut off the edge edges.

Single-sided automatic edge banding machine with joining unit, hot melt adhesive specification for straight workpieces (EVA-PUR glue basin with outlet function optional), HF cross-cut saw station, HF milling unit, chain feed, double roller top pressure, extendable workpiece support rail and signal lamp for workpiece sequence. For ABS, PVC, melamine and thick wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 mm and from 8 – 50 mm workpiece height.

workpiece return Brand: Ligmatech Type: ZHR 15/XX/RE Year: 1995 for right machine

Automatic Edge Banding machine type OCMAC BS 21 . second hand composition : - glue pot - edge-trimming unit (2 motors) Kw 2 each one . rpm 12.000 with cabinet with HF converter Hp 5 volt. 380/50

Edge banding machine OTT Type: ATLANTIC V 6 B.J.: 1998 Glue unit / also polyurethane adhesive can be Cut from the edge Green cut front and rear Simple milling Profile milling Profile cyclin Simple cyclin Speed 12 m / min Overall dimensions: 0.400 cm, 95 cm wide, 130 cm high; Weight: 1,400 kg

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min

max. banding thickness : 0.2 - 6 mm Min. workpiece thickness : 8.0 mm max. workpiece thickness : 42 mm min. workpiece width : 70 mm Feed speed 1: : 12 m/min Adjustment of the joining ruler : axis via control Heating time : approx. 6 min Auto. Role Magazine : Yes Cross-cut shears up to : 3.0 mm Single edge feeder : Yes Gluing : Glue basin with granules Cross-cut saw : Yes Double-cap unit Combination unit flush milling

OTT Pacific V12-F PLUS PLC Comp. Control LCD display Pre-milling unit immersion-controlled Full car. Roller and edge magazine High-speed gluing station / overhead Double roller top pressure with electr. Positioning Auto. Inlet ruler Flush caps pneum. 0-3° Flush milling/bevel milling 15/30/45° - 12 mm Radius milling R-2, R-5 Corner rounds Radius Scraper Blade Surface scraper blade Soundproof booth with room extraction Machine from a small business with very few linear meters in TOP CONDITION

Key data: 2 mm, 50 mm

Edge banding machine Edge banding machine OTT Type: 20S Edge banding with hot melt glue glue basin Plastic edges up to 2 mm Solid wood edging up to 20 mm Flush milling units at the top and bottom Profile milling units at the top and bottom Edge grinding unit rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping c ...

OTT Tornado - TOP Control - via a 15-inch colour touch monitor for full automation and maximum ease of use CM-CombiMelt gluing system Suitable for the processing of EVA and PUR hot melt adhesives as well as all common cleaning granules Joining machining part for attaching chipboard Automatic Roller Magazine Automatic Edge Magazine Double cross-cuter, automatic swivel 0° / 3° Flush milling machine - for flush milling - 12mm Fine milling machine RADIUS - Radius milling - Profile knife R2 - R5 Automated Copy Milling - Corner Rounds Scraper Device - Radius Surface Scraper Device Lubricant Spray Device - PU Cleaning set with fine buffing device very stable workpiece support with roller conveyors - FRONT with scissor pull-out Complete tooling included First delivery 2012 Machine is WORKSHOP OVERHAULED in TOP CONDITION

Model UNIKAT 203 up to 20 mm solid edge, caps, milling, rounding and chamfering unit

Brought from Germany. The machine did not work in Lithuania. You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

SPECIFICATIONS: Execution: - Gluing machine - Cross-cut saw unit - Flush milling - Scraper unit - Brushing unit

SPECIFICATIONS: Max. gluing height mm: 55 (polyurethane glue) Workpiece length min. mm: 250 Aggregates: Headjoints/Milling Cutters/Cutters Rounding unit/edge cutter Edge trimmer

Description: Serial Number: KK00018498 Type: B04 Max. working width: 2 mm max. board thickness 50 mm , Minimum board dimensions: 180x65 mm , Feed speed 6 m/min Machine with gluing unit Saw for cross-cutting Profiling unit Machine equipped with PLC Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 1,500 mm, weight approx.: 300 kg

Description: Max. panel height 50 mm Min. edge thickness 0.4 mm Max. edge thickness 5 mm Max. forward feed speed 12 m/min Pressure with idle wheels NO. PANEL SIZING / MILLING UNITS , Unit : pre-milling unit automatic timed intervention motor power : 1.8 KW Edge coil magazine yes glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 4 NO. EDGE PROCESSING UNITS 1 Processing Unit : end trimming no. motors : 2 motor power : 0.35 KW NO. EDGE PROCESSING UNITS 2 Processing Unit : top and bottom rough trimming no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 3 Processing Unit : fine trimming to trim and round no. motors : 2 motor power : 0.65 KW NO. EDGE PROCESSING UNITS 4 Processing Unit : Corner rounding no. motors : 2 motor power : 0.5 KW NO. EDGE PROCESSING UNITS 5 Processing Unit : edge scraping NO ...

Description: serial number AH00004898 track feed speed 11 m/min panel thickness 8-60 mm thickness of edges in strips 0,3-6mm thickness of rolled edges 0,3-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm exceeding material to the panel thickness 2+2 distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) 90 mm opening for panel support roller 500 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document PDF - OLIMPIC K 360 HP.pdf  ,serial number: AH00004898, Approx. Onsite Dimension. (l x w x h): 4,800 x 1,300 x 1,800 mm, weight approx.: 1,400 kg

Description: serial number AH00004035 variable track feed speed 12-18m/min panel thickness 8-60 mm thickness of edges in strips 0,4-8 mm thickness of rolled edges 0,4-3 mm max. section of rolled edges 135 mm² coil-holder plate diameter 780 mm distance between two successive panels 600 mm minimum panel length (100 mm min. width) 140 mm min. length of edge in rolls 180 mm min. length of edge in strips 220 mm min. panel width (210 mm min. length) (with unit adjustment modification) 60 mm opening for panel support roller 560 mm worktable height 900 mm Betriebsspannung 400 V, 3 phases, 50 Hz nennstrom 29A leistung 10 kA for futher technical detail please consult document ,PDF - OLIMPIC K 560 R PS 7.pdfserial number: AH00004035, Approx. Onsite Dimension. (l x w x h): 5,000 x 1,300 x 1,900 mm, weight approx.: 1,900 kg

SPECIFICATIONS: Max. machinable edge thickness mm: 1.5 - 10 Max. edge thickness mm: 55 Max. feed speed: 18 m/min CNC control Soundproof booth Chain feed drive Equipment: Sanding unit / Glue / Edge unit / Round unit / Edge scraper / Glue scraper / Brushes

I sell a fully equipped edge banding machine SCM Olimpic S3000, built in 2011: Configuration: Input stop servo motor adjustable Pneumatically adjustable joint milling machines Edge banding with preheating tank Material pressure zone servo motor adjustable Cross-cut saws pneumatically adjustable Strong milling machines can be adjusted manually Pneumatically adjustable radius milling top + bottom Round unit 4-motor pneumatically adjustable Radius puller blade R2 can be switched off pneumatically Surface of the drawing blade Polishing brushes Hot-air blower Separator injection front and rear STARTOUCH control system Control panel Barcode reader Working height servo motor adjustable Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 12m/min. PUR glue possible. Second glue tank brand new included. Only 6,153 meters glued! Machine practically ...

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Control system MEGA 120 & NESTING GROUPS SCM Group Joining unit with Dia-Leitz tools Glue basin station with quick-change pool Cross-cut unit with swivel function up to 15° Soft and postforming plates can also be known. Flush milling unit with radius milling Solid wood edges 6 x 60 mm Spraying device in front of joining unit Corner rounding unit Edge Brick Blade Unit Surface drawing blade unit Spraying device in front of babble unit Swabing unit Feed speed 10 m/min Machine length 4450 m

Edge banding machine with joining unit Alternating pool Automatic edge magazine up to 5 mm strips Clip Flat milling round Pulling blade edge Flat brick blade Brush / Scabible

Inv. Num. : 5133 Type: ACTIVA/1-48 Producer: STEFANI Created: 2001 Parameters: Edge thickness: 0.4-16 mm Part thickness: 10-60 mm Minimum edge length in slats: 260 mm Minimum length of solid plywood: 260 mm Compartment capacity: 1.6 kg Drawer capacity: 8 kg/h Space for mounting the device: 1270 mm The machine is in good condition.

• Workpiece thickness: 8 - 55 mm • Workpiece width min.: approx. 30 mm • Workpiece length min.: approx. 130 mm • Edge thickness: 0.4 - 1.0 mm • Roller separation max.: 0.8x60 mm • Inner radius: 25 mm • Heating time: max. 2 min • Temperatures: approx. 260 - 400°C • Diameter foil plate: 600 mm • Table depth min.: 465 mm • Table depth max.: 955 mm (extended) • Table length: 1400 mm • with edge cutter • Working height: approx. 230 mm • Weight: approx. 87 kg • Changeable location, as equipped with 2 wheels! Electrical connector: • 230V/ 50/60Hz Total connection: • 3.3 kW Heating: • 3.0 kW Dimensions (WxDxH): approx. 1700 x 1600 x 1100 mm Transport dimensions (HxWxD): approx. 1100 x 1400 x 750 mm (without pallet!) The machine has been completely reworked, cleaned and thoroughly tested in our company. (Changes a ...

Description: Bench size: 1190 x 370 mm Maximum edging height: 220 mm Total dimensions approx. (length x width x height) 1400x1100x1300Approx. Onsite Dimension. (l x w x h): 1,400 x 1,100 x 1,300 mm, weight approx.: 200 kg

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Type FZ-515 Thickness of panel 10-60 mm Edging thickness 0,4-3 mm Feeding speed 15 m/min Air pressure 0,8 MPa Total install power 6,5 kW Panel width ? 60mm Transport dimensions 3700x900x1700 mm Weight 1200 kg

Type SE-360D Thickness of panel 10-60 mm Edging thickness 0,3-3 mm Feeding speed 13-22 m/min Air pressure 0,6 MPa Voltage 380V/50Hz Total install power 10,5 kW Min. panel dimensions 150(L)x150(W) mm Made in 2017 y. Transport dimensions 4420x900x1560 mm Weight 1400 kg