- with lateral Kappsaege
- year of manufacture 2001 -DTR - after HOMAG service - pre-cutter, earning corners - wooden glue up to 9 mm TECHNICAL PARAMETERS: machine tool adapted for machining PVC/ABS flanges veneer up to 3 mm thick and wood stickers up to 9 mm thick pre-cutter - milling the board belt pressure tank with glue, for hot melt glue granules additionally roll for applying glue heated strip tape strip guillotine - pre-cutting veneer 3 pressure rollers 2 ready-made ball cutting units 2 edge milling units (radial cutters) corner earning unit (milling) scraper aggregates - for removing excess glue polishing units .max. element thickness 50 mm Min. element width 60 mm Min. element length 160 mm feed speed 96 m/min total power 10,8 kW extraction connection diameter 120 mm dimensions (L/W/H) 5700 / 1200 / 2100 mm weight 2000 kg
bargain price! used, top condition, top equipment, little used Make Brandt Type KDF-790 Year of construction 2008 CE type tested Program control type Power-Control PC20+, renewed about 1 year ago Glue system granulate rapid heating basin + PU glue part Pre-melting container for granulate Quick change basin 1 piece for PU Edge thickness 0.4 -12/15 mm Workpiece height min. 8 mm max. 60 mm Feed infinitely variable from 8 - 20 m/min. Caps from the roll up to 3 x 45 mm / 0.8 x 65 mm Pre-assemble with DIA tools cutter heads 2 x 2.2 kW, H= 62 mm Snipping unit swiveling 0Â°-15Â°, 2 x 0.35 kW Copy corners 4 x 0.3 kW Pre-milling Flush milling 2 x 0.55 kW Flush radius milling with pneumatic infeed 2 x 0.55 kW radius scraper surface scraper buffing 2 x 0.18 kW, Detergent spray device Universal milling unit 1 x 4.0 kW 0-90Â° swivelling quick-change gluing part for hot-melt adhesive granulate ...
DATI TECNICI: Composizione: Quadro di comando Power Control PC2 Gruppo rettificatore con 02 unità a fresare Gruppo phon Gruppo preriscaldamento Piatto portaroloto Cesoia Gruppo incollaggio Prefusore Lampada di riscaldamento a infrarossi della colla Rulli di pressione per altezza bordo max mm: 65 Gruppo intestatura Gruppo refilatore Gruppo arrotondatore Rashiabordo Rashiacolla
Description: further technical data in PDF . serial number: 0 - 261 - 06 - 0540, dimensions (l x w x h) approx.: 6,000 x 1,000 x 2,000 mm, weight approx.: 3,300 kg
Description: Total hours 2993.72 Total workpieces 343410 Edge length 2874 9.9 m Hours 32 1.16 Workpieces 3805 2 Edge length 28-30 6.7 m serial number: 0-261-06-4106, joint trimming unit: ✔ 2x 2,2 kW, gluing unit: QUICKMELT, snipping unit: ✔, rough trimming unit: ✔, fine trimming unit: ✔, profile trimming unit: ✔, flat scraping unit: ✔, edge buffing unit: ✔, return system: https://www.surplex.com/de/m/ligmatech-boomerang-zhr-1514re-rueckfuehr ung-781002.html, total power approx: 14,4 kW, dimensions (l x w x h) approx.: 6,000 x 1,200 x 1,800 mm, weight approx.: 3,000 kg
Description: serial number: ,0-261-20-5373 feed rate: 8 - 18 m/min. working height: 950 mm pneumatic connection: min. 6 bar total length: 5760 mm workpiece width min.: 70 - 150 mm workpiece protrusion: 38 mm workpiece thickness: 8 - 60 mm jointing unit: 2 x 2,2 kW gluing unit: A12 trimming unit chamfer / straight: 2 x 0,35 kW pneumatic adjustment caps chamfer / straight pneumatic 2-point adjustment caps pre-milling aggregate: 2 x 0,55 kW 0Â° pneumatic 2-point adjustment multifunctional form milling unit: 2 x 0,4 kW profile scraper with quick change heads pneumatic adjustment scraper glue joint scraper buffing unit serial number: 0-261-20-5373, workpiece thickness: 8 - 60 mm, workpiece overhang: 38 mm, workpiece width min.: 70 - 150 mm, feed: 8 - 18 m/min, joint trimming unit: 2 x 2,2 kW 200 Hz, gluing unit: A12, snipping unit: 2 x 0,35 kW, profile trimming unit ...
Description: serial number: ,0-261-20-6050 feed rate: 8 - 18 m/min. working height: 950 mm pneumatic connection: min. 6 bar total length: 5760 mm workpiece width min.: 70 - 150 mm workpiece protrusion: 38 mm workpiece thickness: 8 - 60 mm jointing unit: 2 x 2,2 kW gluing unit: A12 trimming unit chamfer / straight: 2 x 0,35 kW pneumatic adjustment caps chamfer / straight pneumatic 2-point adjustment caps pre-milling aggregate: 2 x 0,55 kW 0Â° pneumatic 2-point adjustment multifunctional form milling unit: 2 x 0,4 kW profile scraper with quick change heads pneumatic adjustment scraper glue joint scraper buffing unit serial number: 0-261-20-6050, workpiece thickness: 8 - 60 mm, workpiece overhang: 38 mm, workpiece width min.: 70 - 150 mm, feed: 8 - 18 m/min, joint trimming unit: 2 x 2,2 kW 200 Hz, gluing unit: A12, snipping unit: 2 x 0,35 kW, profile trimming unit ...
Description: Profile trimming machine workpiece thickness max. 55 mm - workpiece width min. 80 mm profile depth max. 80 mm - inner radius min. 10 mm edge material thickness max. 3 mm (depending on radius and edge material) milling motor 0,5 kW, 27.000 rpm. - Connector 0,5 kW compressed air connection 6 bar dimensions L x W x H 850 x 650 x 1430 mm working table - height 1000 mm weight approx. 120 kg Machine function-tested IN OVERHAULED CONDITION ! Location: A-4020 Linz dimensions (l x w x h) approx.: 1,200 x 800 x 400 mm, weight approx.: 120 kg
Edge bander with manual operation and hot melt glue application for shaped panels Panel thickness: 10 to 40 mm Edge thickness: 0,5 - 1 mm Feed speed: ca. 4 m/min Only coil edges
Edge banding machine Brandt KDF 440 C with joints, corner copying and two drawing blades. Very little walked. Edge strength approx. 0.4 - 8mm Werkstueckhoehe approx. 8 - 60mm Feed approx. 11m/min Noise protection hood Extendable workpiece support Suction connection 1 x 120mm, 1 x 100mm, 2 x 80mm, 3 x 60mm PC20 control with large color screen for easy operation of the machine Aggregates: Glue basin quick-change equipment, currently a glue pool available Upper pressure manual adjustment Inlet ruler manual adjustment Inlet lock Fuegefraesen with geschaerften Diafraesern Whispercut Gluing part switchable for synchronisation and counter-rotation Pressure zone with 3 rolls Cross-cut saw with 2 motors, straight caps or chamfer caps (program adjustment) Pre-milling unit, (pneumatically convertible between buendigfraesen and supernatant) Multifunction m ...
Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg
Edge banding machine Brandt type KTD Specifications: • Glue pot • Conversion: carried out by the company Hüttenhölscher in Verl • Field of application: Adhesive application system for handle strips • Vacuum table: included • Automatic pressure zone: included
Edge banding machine with joint/form milling machines Brandt Highflex 1220 FC YOC 2015 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 3.0 mm Feed speed 10 m/min Joining Milling – DIA Tools Gluing unit Contact heating shoe Pressure zone Pneumatic Package Cross-cut unit Flush milling unit Profile drawing blade unit Schwabbelaggregat Electronics control Machine length 4200 mm Machine dimensions W x H 1300 x 2180 mm Weight 1400 kg
Edge banding machine, edge banding machine, edge banding machine, Finishing unit, buffing unit, modular unit, format processing unit, double-end profiler, edge processing machine, sanding unit -Sanding unit: from edge banding machine BRANDT KM 36 -Motor: VEM 1.5 kW -Speed: 2840 rpm -Sanding belt: 2010 x 140 mm -Dimensions: 990/570 / H340 mm -Weight: 126 kg
Edge glue Brandt Type: KD 86 Built: 1993 Edge thickness up to 12 mm Glueing of roll up to 3 mm with pneumatic cross-cut station Glued part with Quickmelt pre-melting tank Heavy pressure zone with one driven and three reprint rollers Saw cutting station for the front and rear overstanding Milling station flush / chamfer Second milling station radius milling R 3 mm Corner copying with pass Radius drawing blade R 3 mm Chip catching box Schwabbelstation Pneumatic package for post-processing agregates Extendable support for large parts Control panel at eye level Space requirement approx. 6100 mm
Edge gluing machine Brandt Type: KTD 14 Built: 1996 Edge gluing machine with direct glue indication for gluing Edge materials on straight workpieces. Processing units: Install Glue indication Roller separation Flush milling Caps Workpiece thickness 10 - 40 mm Edge material thickness 0.4 - 1.2 mm Workpiece width min. approx. 50 mm Workpiece length min. approx. 260 mm Feed 6 m/min. Operating voltage 400 V+/- 10% - 3 Ph - 50 Hz Heating capacity 1.2 kW Connection value 3.04 kW Electrical connection cable length approx. 4.5 m Compressed air connection 7 bar Operating pressure 6 bar Weight: approx. 150 kg Space requirement: approx. 1800 x 1600 mm
Edge staerke 0.4 - 12 mm Factory tumper thickness 10 - 55 mm Werkstuecklaenge min 160 mm Werkstueckgreite min 65 mm feed 13 m/ min Pneumatic connection 7 total length 5220 mm Weight 1950 kg heating basin with Quickmelt - hot melt adhesive granulate glue rolling direction for dc and counter running edge magazine for PVC Roller and strip edgingedges Motor upper pressure adjustment Pneumatically betaetated pressure rollers swivel able at the machine inlet all aggregates route-controlled - i.e. all factory-switched-controlled limit switches are eliminated caps fraes combination chamfer/radius fraesen with 2 pivoting aggregates (1 unit with combi-fuse radius/ straight, 2. Unit with chamfer.) with pneumatic blade drawing blade - with pneumatic shads chain track central lubrication Quick-changeable glue digital converters Electronic frequency converters with integrated engine brake edge mon ...
Equipment: - Machine stand throughout - Fixed stop side right - Paint finish Grey RDS 240 80 05 - Inlet ruler motorically adjustable, extended by 300 mm - Inlet lock pneumatically controlled - automatic edge feeder - Upper pressure: belt upper pressure - Height adjustment motorized - Position display and input centrally via the controller - Transport chain with rubber support, 80 mm wide - automatic central lubrication for the transport chain - Workpiece support in scissor design, approx. 1000 mm extendable - Noise protection equipment - Hood interior lighting 3 lamps - Control Power Control PC20+ Aggregate technology: - Joining milling unit 2 x 2.2 kW 200 Hz (60 mm joining milling cutter set) - Gluing unit A15 (workpiece preheating, QA34 application unit, infrared adhesive activation, magazine for rolls and fixed lengths, pressure zone with motorized adjustment, driv ...
equipment: - Quick-change glue part (Quickmelt) for hot melt adhesive. - Automatic edge magazine - reinforced pre-cap scissors - Centrally adjustable upper pressure - Noise protection cladding Standard aggregate assembly - Cross-cut unit chamfer/straight - Pre-milling unit at the top and bottom - Fine/radius milling unit at the top and bottom - Pull blade unit for PVC edges - Swaying unit 2 motors specifications Edge thickness 0.4 - 8 mm Roller separation max. 3 x 45 mm Workpiece thickness 8 - 40 mm Workpiece width min. 65 mm Workpiece length min. 160 mm Feed max. approx. 11 m/min. Electrics 400 V - 3 Ph. - 50 Hz Pneumatic connection min. 6 bar Connection value approx. 7 kW Total length 5,240 mm
Equipment: - Quick-change gluing part for hot melt adhesive - Autom. Edge magazine with roll plate - Pressure zone with pneum. pressurized pressure roller and 2 free-running repressure rollers - Power Control PC 20+ control - Inlet ruler adjustable - Joining milling unit 2 x 2.2 kW - pneum. Adjustment caps, drawing blade, program adjustment side button rollers and pneum. 2-point adjustment vertical probe rollers - Cross-cut unit 2 x 0.18 kW - Milling unit 2 x 0.55 kW - Mould milling unit 1 x 0.35 kW - Drawing blade unit for PVC edges - Surface drawing blade glue joint - Cleaning agent specification workpiece - Schwabbelaggregat Specifications Edge thickness 0.4 - 8 mm Roller cutting max. 3 x 45 mm or 0.8 x 65 mm Workpiece thickness 8 - 60 mm Feed max. approx. 11 m/min. Electrics 400 V - 3 Ph. - 50 Hz Connection value approx. 10.5 kW Pneumatic connection 6 bar To ...
Equipment: - Quick-change Quickmelt gluing part for hot melt adhesive. - Automatic edge magazine with roll plate and autom. Edge feeder - extended inlet ruler, adjustable - heavy pressure zone (with pgroamm adjustment) with a driven main pressure roller, as well as 3 repressure rollers - Motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control PC 16 - Modem for remote service and remote maintenance - Noise protection cladding - autom. Chain track central lubrication - Interface for return (electronic) DAHR01/02/15 Aggregate assembly - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, pneum. Adjustment chamfer/straight - Milling unit 0-25 degrees, 2 x 0.55 kW counter-rotation, to flush milling machine, pneum adjustable pneum. 2-point adjustment Vertical probe rollers - Milling unit ...
Equipment: - Quickmelt gluing part for hot melt adhesive - Automatic edge magazine for rolls and fixed lengths - Heavy pressure zone with driven, pneumatically applied main pressure roller and 2 free-running repressure rollers. (adjustable by program) - motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control power control PC 20+ - Feed variable 8-14 m/min - PU overpressure rollers - Inlet ruler adjustable by program - Joining milling unit 2 x 2.2 kW - Bevel cross-cut unit/straight 2 x 0.18 kW - Milling unit 2x0.55 kW (adjustable by program) with multiple roller pressing - Mould milling unit top+bottom, 2 x 0.35 kW - Drawing blade with quick-change heads and additional device for pointed workpieces - Glue joint drawing blade - Schwabbelaggregat - Automation package for 1-milling machines, consisting of: 3175 - Pneumatic Adjustment Caps ...
Foot operated 1200 x 800 mm Dust nozzle 80 mm pneumatic connection Cable + plug 16A 1 set of bed.-Tools 1 set of key roles
for bill of exchange order unit
For curly parts, Edges with pre-coating
form parts edge bander with PU-glue unit Nordson type MC 106-2 / S 0733595 / PN 269950 C 2000 W - max. 6000 W for form parts with glue application used manufactured by Brandt built in 1995 CE tested for type examination located inÂ 97447 Gerolzhofen sale in current condition as seen - free on truck -
Glue roll Printing unit End trimming unit 3130, Swivel, 2 x 0,35 kW Milling combination 2 x 4130, swiveling 1 unit - RADIUS/straight combo 2. Unit - Fase Scraper 5705, RADIUS, 3 mm Buffing unit 5380, 2 x 0.18 kW Power 9kW 400V Pneumatic connection 6bar Suction connection 1 x 180 mm Weight approximately 1950 kg Workpiece thickness 10-55 mm Workpiece length of min. 160 mm Workpiece width of min. 65 mm Edge thickness 0.4-12 mm Roll away 3 x 45 or 0.8 x 60 mm Feed 13 m / min
Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg