Manufacturer:
(Category: 106-448)
pressure: 130 tchamfer lenght: 3200 mmdistance between columns: 2700 mmControl: Cybelec CybTouch 12 throat: 400 mmstroke: 200 mmdayligth: 480 mm: 200 mm/sbending speed: 0-10 mm/s: 120 mm/stotal power requirement: 7,5 kWdimensions: 3600 x 1800 x 2700 mmweight: 8.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 225 tchamfer lenght: 2050 mmdistance between columns: 1550 mmcontrol: CYBELEC DNC 1200 PS Eco stroke: 550 mmtable height: 700 mmthroat: 405 mmdistance between table / ram: 320-870 mmcolumn arm: 405 mmweight of the machine ca.: 14.000 kgAccessories / equipment:- controlled axes: Y1 - Y2 - X - R- Z1 and Z2 can be moved manually- Lasersafe angle measurement- Pneumatically adjustable support table- pneumatic upper and lower tool clamping- 2-hand foot control- manual crowningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 330 tchamfer lenght: 4100 mmdistance between columns: 3600 mmControl: Cybelec VisiTouch 24 stroke: 300 mmArm length: 500 mmdayligth: 500 mm: 165 mm/sbending speed: 0 - 10 mm/stotal power requirement: 32 kWweight of the machine ca.: 21.000 kgdimensions: 4850 x 2300 x 3520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chamfer lenght: 0900 mmplate thickness: mmdistance between columns: 900 mmpressure: 20 tcolumn arm: 230 mmstroke length max.: 150 mmtravel -x axis: 350 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 310 mmstroke: 200 mmajustment speed: 80.0 mm/secworking feed: 10.0 mm/secreturn speed: 58.0 mm/secdayligth: 385 mmtable width: 240 mmwork height max.: 885 / 1050 mmoil volume: 180 ltr.total power requirement: 15.0 kWweight of the machine ca.: 9850 kg.range L-W-H: 4200 x 1750 x 2450 mm from a maintenance workshop well-maintained condition ()- in checked condition - machine video -https://www.youtube.com/watch?v=o_t9BBMsNNsEquipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electric back stop, with ball screws (X axis) with 4x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor adjustment of the immersion depth (Y1 + Y2 axis) with digital position display- swiveling operation, mou ...
chamfer lenght: 650 mmplate thickness: -1.6 mmweight of the machine ca.: 150 kgdimensions of the machine ca.: 2000 x 1000 x 900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 185 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 175 mm/sbending speed: 0-12 mm/stotal power requirement: 22 kWweight of the machine ca.: 15.500 kgdimensions: 4970 x 3260 x 2090 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 tchamfer lenght: 4000 mmdistance between columns: 4100 mmControl: Cybelec VisiTouch 24MX stroke: 300 mmdayligth: 500 mm: 200 mm/sbending speed: 0-12 mm/stotal power requirement: 18 kWweight of the machine ca.: 13.000 kgdimensions: 5080 x 3110 x 1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 tchamfer lenght: 4050 mmdistance between columns: 3550 mmControl: CYBELEC ModEva Pac throat: 350 mmdistance between table / ram: 430 mmtable width: 250 mmstroke: 250 mmtotal power requirement: 18,5 kWweight of the machine ca.: 16500 kgdimensions of the machine ca.: 4400x2100x3200 mmEquipment/accessories:- Control conversion at the end of 2018- Electric backgauge 1250 mm- 10-stage die displacement- crowning- EHT 26 mm tool holder- Axes controlled: Y1,Y2,X,R- Sheet metal holding table- 4x manually adjustable stop fingers- pneum. Upper tool clamping- Safety light curtain- 3x height-adjustable support arms- Oil cooler- 2-hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 tchamfer lenght: 2500 mmdistance between columns: 2050 mmtable width: 140 mmtable height: 750 mmtotal power requirement: 8 kWweight of the machine ca.: 4,5 tdimensions of the machine ca.: 3, x 1,2 x 2,6 mEquipment:• manual back stop• upper and lower tools• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 50 tchamfer lenght: 2500 mmdistance between columns: 2050 mmthroat: 200 mmtable width: 140 mmtable height: 750 mmdistance table - lower edge of ram: 300 mmmax. ram stroke: 100 mmclosing speed: 9 - 160 mm/secreturn speed: 55 mm/secvoltage: 380 V / 50 Hzengine output: 4,1 kWtotal power requirement: 5 kWweight of the machine ca.: 3,5 tdimensions of the machine ca.: 3, x 1,2 x 2,6 mEquipment:• manuel back stop• upper and lower tools Split , lower tool 2000 mm long• 2 manual operation / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60.0 tchamfer lenght: 1270 mmdistance between columns: 1000 mmcolumn arm: 410 mmram stroke speed: 160 mm/secwork speed: 10.0 mm/secreturn speed: 165 mm/secwork stroke: 275 mmdayligth: 530 mmtable height: 900 mmtable width: 90.0 mmback stop - adjustable: max. 800 mmoil volume: 150 ltr.voltage: 400 Vengine output: 7.5 kWWeight: 4320 kgrange L-W-H: 2250 x 1960 x 2750 mm Demonstration/demo machine () From our showroom (like new) With very few operating hours--------------------------------------------------CNC press brake with special equipment Version ERGO - knee room for the operator flexible articulated arm mount for the controller increased installation height increased cylinder stroke as well as increased bending beam speeds-------------------------------------------------- Furnishing:- DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color s ...
pressure: 175 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 410 mmram stroke speed: 180 mm/secwork speed: 12.0 mm/minreturn speed: 190 mm/secwork stroke: 275 mmdayligth: 550 mmoil volume: 300 ltr.table height: 900 mmtable width: 90.0 mmvoltage: 400 Volttotal power requirement: 15.0 kWweight: 9800 kgrange L-W-H: 4150 x 2150 x 2800 mm-------------------------------------------------- HIGH-SPEED hydraulic press brake withincreased installation heightincreased cylinder strokeenlarged projection-------------------------------------------------- Furnishing:- DELEM CNC control model DA 66T- swiveling touchscreen control unit- 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning- electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm- on ball screws- controlled electr. Stop fingers Z1 + Z2- split upper deer foot tool Roleri 135.85.R08, System A- ...
pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2600 mmcolumn arm: 250 mmram stroke speed: 100 mm/secreturn speed: 75,0 mm/secwork speed: 7,0 mm/minwork stroke: 180 mmdayligth: 415 mmoil volume: 200 ltr.table height: 900 mmvoltage: 400 Voltrange L-W-H: 4450x2050x2650 mmFurnishing:- DELEM - CNC control model DA-58T- controlled axes: Y1 - Y2 and X- FIESSLER AKAS - laser protection in front of the machine- Deer foot upper tool- Universal die block- manual table crowning- Safety device: light barrier behind the machine- 2 front support arms- SIEMENS - electrical system- BOSCH / HOERBIGER hydraulic system- CE mark / declaration of conformity- Operating manual: machine and control- Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 40.0 tchamfer lenght: 1600 mmdistance between columns: 1200 mmcolumn arm: 200 mmram stroke speed: 60.0 mm/secreturn speed: 80. mm/secwork speed: 60.0 mm/secwork stroke: 100 mmtable height: 760 mmtable width: 150 mmoil volume: 130 ltr.voltage: 400 VoltControl: ESA E21 total power requirement: 4.0 kWweight: 3030 kgrange L-W-H: 2050 x 1800 x 2030 mm Demonstration/demo machine () From our showroom (like new) With very few operating hoursFurnishing:- compact hydraulic press brake- BERNARDO NC control model E21- swiveling control panel- electrical adjustment of the backgauge- Back stop on recirculating ball spindles- electrical adjustment of the immersion depth- Laser protection device in front- Upper deer foot tool - divided- Tool holder with quick change system- Universal die block- side + rear protective device- 2x front support arms- movable double foot switch (operation)The data ...
pressure: 125 tchamfer lenght: 3100 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 120 mmajustment speed: 70.0 mm/secworking feed: 7.0 mm/secreturn speed: 60.0 mm/secdayligth: 325 mmtable width: 180 mmwork height max.: 915 mmoil volume: 150 ltr.total power requirement: 12.5 kWweight of the machine ca.: 9100 kg.range L-W-H: 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop ()Equipment:- simple, conventional electro-hydraulic press brake with torsion shaft for parallelism of the upper beam- electro-motor-driven back stop, with ball screws (X axis) with 2x manually adjustable stop fingers fine adjustment via handwheel at the front, with analog position display- electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) with digital position display- swiveling operation, left-hand side- split deer foot + pointing tool- 1x rotatable Multi V univers ...
pressure: 130 tchamfer lenght: 3550 mmdistance between columns: 3050 mmstroke: 250 mmControl: Cybelec weight of the machine ca.: 11.600 kgdimensions of the machine ca.: 4000x2000x3000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tchamfer lenght: 2050 mmtotal power requirement: 11 kWweight of the machine ca.: 5,9 tdimensions of the machine ca.: m- ram adjustment: 150 mm- distance ram to table: 400 mm- stroke: 150 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1250 tchamfer lenght: 15000 mmdistance between columns: 10160 mmControl: CNC 10 Grafik total power requirement: kWweight of the machine ca.: 230 tdimensions of the machine ca.: 17000 x 5400 x 5900 m- Pressure: 1.250t- Bending length:15.000mm- Control: CNC 10 graphics- No. of axes axes: min. 10- Frame width: 10.160mm- Projection: 770mm- Table length: 15,000mm- Dimensions: 17,000mm x 5,400mm x 5,900mm- Mass: approx. 230tEquipment- Crowning device- CNC 10 control with graphics- Hydr. clamping of the upper tools- Multi-man operation- Increased speeds- Automatic height-adjustable rear sheet stop- die cushion device- Horn length 2,200 mm on both sidesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3000 tchamfer lenght: 14000 mmdistance between columns: 10500 mmControl: CYBELECCNC 7000 m. Grafik table width: 1000 mmstroke: 1300 mmmin./max.distance between table and ram: 1800 mmcontrolled axis: Y1, Y2, X1, X2 total power requirement: kWweight of the machine ca.: mind. 465 tdimensions of the machine ca.: 14600 x 4200 x 7200 mm- throat depth: 700 mm- controlled axes: Y1, Y2, X1, X2- Dimensions (length x width x height):- Foundation depth for table: 3400 mm- Foundation depth for stand: 1700 mm- Dimensions of the individual components for transportation:- Table: 14020 x 4270 x 910 mm, weight approx. 125 tons- Top section: 15240 x 4060 x 910 mm, weight approx. 120 tons- 2 side stands: 7620 x 3550 x 1530 mm, weight approx. 90 tons each- Lower tool: 15240 x 1220 x 1220 mm, weight approx. 40 tons- 2 pcs. Container 40” for cylinder, electrics and various attachments- Control sys ...
pressure: 160 tchamfer lenght: 3050 mmdistance between columns: 2550 mmtable width: 220 mmcolumn arm: 280 mmdayligth: 440 mmwork stroke: max. 250 mmtotal power requirement: 22 kWweight of the machine ca.: 13 t- Hubgeschw. / speed of stroke: abwärts: down, 90 mm/s- Press down 11 mm/s- Aufw. / upward: 90 mm/s- Spez/specif.: 2-Hand/Fuss-Bedienung / 2 –hand foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 180 tchamfer lenght: 3050 mmdistance between columns: 2550 mmthroat: 250 mmstroke: 150 mmreturn speed: 65 mm/secajustment speed: 50 mm/secwork height max.: 1010 mmoil volume: 150 ltotal power requirement: 11 kWweight of the machine ca.: 9500 kgdimensions: 3100 x 1750 x 2850 mmFurnishing:- DELEM CNC control DA65- controlled axes: Y1 + Y2 + X + R- Electric crowning device WILA, controlled via CNC- Electric back stop, travel range 600 mm- hydr. Upper tool holder WILA- hydr. WILA lower tool holder- front laser protection device FIESSLER- 5x manually adjustable stop fingers, foldable- 2x front support arms sliding system”- side + back protection device- Hand and foot controls- Operation manual?The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 tchamfer lenght: 2000 mmweight of the machine ca.: 3 ttotal power requirement: kWdistance between columns: mmdimensions of the machine ca.: mpressure 35tomax. bending length 2000mmarrester behinddrive capacity 4,5 kWweight 3000kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 105 tchamfer lenght: 3100 mmdistance between columns: 2600 mmtable width: 100 mmtable height: 750 mmControl: DELEM DA 65 dayligth: 200 mmworking feed: 0 - 10 mm/secreturn speed: 0-100 mm/secrapid traverse - up: max. 100 mm/secvoltage: 380 V / 50 Hztotal power requirement: 11 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: 4 x 2,2 x 2,8 mEquipment:• CNC-control DELEM DA65 graphic video• manual back-off turning• upper and lower tool• 2 manual control / foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tchamfer lenght: 2050 mmdistance between columns: 1550 mmthroat: 250 mmstroke: 200 mmadjustment of press crosshead: 200 mmstroke speed - idle stroke downwards: 105 mm/secstroke speed - idle stroke upwards: 180 mm/secstroke speed - under load: 9,5 mm/sectable width: 200 mmtable height over floor: 900 mmdayligth: 280 - 480 mmback stop - adjustable: 3 - 729 mmcontrol: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kWweight of the machine ca.: 10 tdimensions of machine L x W x H: 3,70 x 2,45 x 2,80 mAccessories: programmable back gauge, table extensions, various upper and lower dies segmentsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 320 tchamfer lenght: 4000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mBrand: LVDType: PPEB 320/40CNC brand: MorrisCNC model: Solutions ESA 630Year of make: 1990HydraulicCapacity: 320 TBend length: 4.000 mmMulti V + J-kniveSteered backstop X+RIncl. 1 Set of toolsMachine weight: 25.000 kgMachine is flat on the groundThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 140 tchamfer lenght: 3000 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mStocknumber 2010012Type of machine PressbrakeMake COLLYType 3000/140Build in nbChamfer lenght 3000 mmPressure 140 tonStroke 250 mmThroat 310 mmDaylight 520 mm Additional informationincl. 1 set of toolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
