british flag
Resale Logo

5 axis used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information boilers, high pressure containers,...  HERMANN SPRENGER GMBH  http://www.sprenger-essen.de 
banner logo
start page > keywords 5 axis > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125479999 109

GILDEMEISTER MICROSET for sale
Profile Projectors


PROFILE projector & tool before adjusting device Gildemeister MICROSET - 11-01-003-shipping time: immediately number: 11-01-003 manufacturer: Gildemeister type: Microset MACHINE data year: approx. 1986 L x W x H:  ...
used machine
 
PROFILE projector & tool before adjusting device Gildemeister MICROSET - 11-01-003-shipping time: immediately number: 11-01-003 manufacturer: Gildemeister type: Microset

MACHINE data year: approx. 1986 L x W x H: approx. 1800 x 1200 x 1800 mm weight: approximately 1000 kg

Very good condition specifications control / digital display: Quadra - Chek 200 procedures (range): X - axis: approx. 620 mm Y - axis: approx. 300 mm maximum tool length: approx. 625 mm max � Pro�lprojektor: approx. � 400 mm for tool - recorded: ISO 4 0 loading ISO 50 with catchment HSK 100 with reference tool ABS 63 with reference tool ABS 80 with reference tool accessories � complete machine documentation � feet � transport locking devices

Accessories on request price and other specifications on request
1986
Price  
    request
125490316 101

SIGMA Flexi 7P-4AX for sale
Machining Center - Universal


x-travel:2 x 1.500 1 x 2.100 mmy-travel:700 mmz-travel:950 mmmax. workpiece dimensions:D = 860 x 700 mmmax. table load:2 x 1.400 oder 1 x 2.500 kgtravels table: : X-Axis (table longitudinal):2 x 1.000 x 730 mmX-Axis ...
used machine
 
x-travel:2 x 1.500 1 x 2.100 mm
y-travel:700 mm
z-travel:950 mm
max. workpiece dimensions:D = 860 x 700 mm
max. table load:2 x 1.400 oder 1 x 2.500 kg
travels table: :
X-Axis (table longitudinal):2 x 1.000 x 730 mm
X-Axis (table linked):1 x 2.100 mm
Y-Axis (table transversal):700 mm
Z-Axis (Head vertical):950 mm
B-Axis (Swiveling head):+/- 110 °
C-Axis (prepared 5. Axis, rotary table):+/- 360 °
main spindle :
Max. Power, ED 100/40% :22/23 kW
Max. Torque, ED 40%:180 Nm
turning speed range:40 - 12.000 U/min
Swiveling range B-Axis:+/- 110 °
Tool taper DIN 69871:SK 40
Pull stud:DIN 69872
total power requirement:22/33 kW
weight of the machine ca.:15 t
dimensions of the machine ca.:6 x 4 x 3 m

Two machine tables inside the working area, movable separately for pendulum machining, linkable for long workpieces Equipment & Accessories ? 2 pcs. Zero-Point clamping system mounted on both machine tables ? 30 pcs. Tool taper SK 40 ? NC-rotary table manufacturer LEHMANN, type EA-431.2A, with clamping yoke and counter bearing ? 3D-touch probe ? Machine housing with fully closed working area ? 2 pcs. chip conveyor ? Refrigerating unit for spindle cooling ? Electronic handwheel HR410
2008
Price  
    request
125479997 109

SODICK A 325 for sale
Wire Cutting Spark Erosion Machine Tools


Wire EDM SODICK A325 bearing no 1072 A2759 category wire EDM machine make SODICK A325 type built in 1998 State second-hand machine control CNC storage HAGUENAU country of origin Thailand delivery immediately cargo base s ...
used machine
 
Wire EDM SODICK A325 bearing no 1072 A2759 category wire EDM machine make SODICK A325 type built in 1998 State second-hand machine control CNC storage HAGUENAU country of origin Thailand delivery immediately cargo base stock HAGUENAU

Technical details table length 600 mm table width 400 mm amperes A travel - x 350 mm travel - y 250 mm travel - z 220 mm U-axis 80 mm V-axis 80 mm wire diameter 0.03 - 0.3 mm working pool size 895 x 650 mm max. work piece weight 450 kg Werkstückhö Hey â Max 220 mm workpiece dimensions Max 600w x 530 x 200 mm autom. Wire Threading conical cutting +/-30 ° / 30 mm ° wire voltage 300-2300 g dielectric 530 l total power consumption kVA machine weight approx. 3000 kg space requirement approx. 2.25 x 2.45 x 2.10 m description Autom. Wire Threading AWT serial data interface
1998
18,500 €  
    request
125479842 109

MITSUBISHI CX20 for sale
E2475


State: Machine still runing by customer X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece ...
used machine
 
State: Machine still runing by customer

X-Axis Travel (mm):
X-Axis Travel (mm):
X-Axis Travel (mm):
Worktank length:
Worktank width:
Worktank height:
Max. workpiece length:
Max. workpiece width:
Max. workpiece height:
Max. workpiece weight:
Taper angle/height:
Automatic Wire Feeding:
Length x width x height:
Weight (kg):
Worked power hours:

The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.
1976
Price  
  IT   request
125479986 103

FRITZ WERNER SSF 3 for sale
Portal Milling Machines


MULTIPLE-spindle milling machine FRITZ WERNER SSF 3 - 07-99-001 shipping time: immediately number: 07-99-001 manufacturer: Fritz Werner type: SSF 3 MACHINE data built: approx 1980 L x W x H: approx. 1900 x 1800 x 1800 ...
used machine
 
MULTIPLE-spindle milling machine FRITZ WERNER SSF 3 - 07-99-001 shipping time: immediately number: 07-99-001 manufacturer: Fritz Werner type: SSF 3

MACHINE data built: approx 1980 L x W x H: approx. 1900 x 1800 x 1800 mm weight: approx. 1200 kg

Very good condition

Machines for cutting dovetail guides specifications suitable including multiple SPINDLES - milling procedures: X - axis: approx. 600 mm Y - axis: approx. 200 mm Z - axis: 500 mm Tischaufspannï¬?äche: approx. 740 x 220 mm spindle number: 3 piece speed - locker El: approx. 3000 rpm total power: approx. 7.5 kW feeds & express ducts: Max in all 3 axes milling range (dovetail): approx. 400 mm (wide) range of 1 & 3 Milling spindle: about 50-80 degrees elevation 1 & 3 Milling spindle: approx. 80 mm height Ung 2. Milling spindle: approx. 50 mm accessories â?¢ left / right rotation â?¢ mechanical vise â?¢ 10 pieces-various milling head attachment â?¢ various milling head dies â?¢ work lamp accessories on request price and other specifications on request
1980
Price  
    request
125475410 102

VOEST DA 210/1 for sale
Center Lathe


turning diameter over bed: 430 mmturning diameter over slide rest: 245 mmturning length: 1000 mmcentre height: 210 mmturning speeds: 44 - 2000 U/minspindle taper: 55027 Gr. 6 spindle bore: 52 mmtaper bore: metr. 57 tails ...
used machine
 
turning diameter over bed: 430 mm
turning diameter over slide rest: 245 mm
turning length: 1000 mm
centre height: 210 mm
turning speeds: 44 - 2000 U/min
spindle taper: 55027 Gr. 6
spindle bore: 52 mm
taper bore: metr. 57
tailstock quill taper MT: Mk 4
power capacity: 5,5 kW
weight: 1,3 t
Mechanic: good:
Optical condition: good:
The machine can be viewed under current.:
0722801
380 V, 50 Hz Color: green

Equipment:
Engine brake
2 emergency stop switch
3 axis Mitutoyo digital display Linear Scala PLL 13 L
3 jaws - wedge bar 200 mm
Drill chuck with insert pin
Center point firmly
dto, running
Multifix holder B
3 inserts
Coolant device
Drum stop
Chip tray
Shaving back wall
Rotary test on 200 mm flying 0,015 mm
Operating instructions, spare parts list, circuit diagrams
Machine is workshop tested and with electrical acceptance record
usgeliefert!

! Upon request, machine with electrically locked chip protection
to be delivered at extra cost!
! Machine can be adapted to the new machine guidelines!



This ad was created with MODUL MWS - the software solution of LogoTech.
1990
Price  
    request
125479982 101

TOPPER TMV - 720 A for sale
Vertical Processing Centers


VERTICAL MACHINING Center TOPPER TMV - 720-A - 07-09-089 delivery time: immediate number: 07-09-089 manufacturer: Topper type: TMV - 720 A MACHINE data year: approx. 2011 L x W x H: approx. 2500 x 2500 x 2900 mm weigh ...
used machine
 
VERTICAL MACHINING Center TOPPER TMV - 720-A - 07-09-089 delivery time: immediate number: 07-09-089 manufacturer: Topper type: TMV - 720 A

MACHINE data year: approx. 2011 L x W x H: approx. 2500 x 2500 x 2900 mm weight: approx. 3800 kg

Very good condition - top gepï¬?egt, little hours technical data control: Fanuc O i - MD with Manuel Guide i traverse paths: X - axis: approx. 720 mm Y - axis: approx. 480 mm Z - axis: 530 mm Tischaufspannï¬?äche: approx. 800 x 480 mm spindle: Rotary Number range: approx. 10-8000 RPM spindle taper: BT 40 power: approx. 7.5 kW feeds & express ducts: feed range: approx. 1-15000 mm / min rapid traverse: 48 m / min tool changer: double arm grab number of tool stations: 24 piece chip-to-chip - time: approx. 4.0 seconds 4th axis rotary table (optional) over M - command manufacturer & type: Nikken CNC 170 accessories â?¢ full protection - Panel â?¢ conveyors â?¢ coolant system â?¢ electronic Handwheel â?¢ RS 232 data interface â?¢ PCMCIA - data interface

â?¢ Central lubrication â?¢ work light â?¢ machine light â?¢ complete machine documentation â?¢ feet â?¢ original transport protection â?¢ various wrenches & tool kit â?¢ various toolholders â?¢ sale takes place without clamping tools, Rundtis ch is optional

Accessories on request price and other specifications on request
2011
Price  
    request
125475408 107

HAEUSLER HPR 12 mech. asym. - V+H for sale
Section Bender


I-beam section - flat steel: 220 bei Dm 1200 mmI-beam section - upend: - mmangular steel - leg outwards: 110x110x14 bei Dm 1000 mmangular steel - leg inwards: 80x80x10 bei Dm 1000 mmflat steel flat: 100 x 20 bei Dm 1000  ...
used machine
 
I-beam section - flat steel: 220 bei Dm 1200 mm
I-beam section - upend: - mm
angular steel - leg outwards: 110x110x14 bei Dm 1000 mm
angular steel - leg inwards: 80x80x10 bei Dm 1000 mm
flat steel flat: 100 x 20 bei Dm 1000 mm
T-steel / side out: 120x120x13 bei Dm 1200 mm
U-iron on the x-axis: 22 bei Dm 1200 mm
pipes: 102 x 6 bei Dm 900 mm
round material: 75 bei Dm 700 mm
square material: 60 x 60 bei Dm 600 mm
bending speed: 3,5 m/min
No. - Rolls: 3
Drive: 7,5 kW
weight: 6,4 t
dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m
Condition: ready for operation:
Electric 380 Volt:
Set of standard rolls: I + H
Motorized adjustable rollers:
Control panel:
Central lubrication: autom.
Rolls for round material: 100 mm
Machine dealer with own stock of 2500 m² and certification of the database
Machineseeker.



This ad was created with MODUL MWS - the software solution of LogoTech.
1976
Price  
    request
125479978 101

CHEVALIER VMC 2040 for sale
Numerically Controlled Machining Centres


Machining center - vertical CHEVALIER VMC 2040 bearing no 1105-02406 category machining center - vertical make CHEVALIER type VMC 2040 year 2000 State second-hand machine control CNC SIEMANS 810 D storage location from d ...
used machine
 
Machining center - vertical CHEVALIER VMC 2040 bearing no 1105-02406 category machining center - vertical make CHEVALIER type VMC 2040 year 2000 State second-hand machine control CNC SIEMANS 810 D storage location from donor country of origin taiwan s ince immediately cargo base free loaded truck technical details x way 1050 mm y-way 500 mm z trail 500 mm control SIEMANS 810 D rapid traverse X 30 m / min spindle speeds 8000 U/min rapid traverse Y 30 m / min rapid traverse Z 18 m / min Werze ugplätze in the magazine 20 BT 40 distance between spindle nose and table 100-735 mm table size table burden 1450 X 635 mm 1200 T MAX tool diameter 80 (160) mm of maximum tool weight 12 kg tool change time 2.4 sec power Haupspindel 15 power X-axis 3.3 kW motor power Y-axis 3.3 kW motor power Z-axis 3.5 kW total power 25 kVA machine weight 5.5 tons of space requirement approx. L 2.8 X 3,300 X 2.7 m description machine with X 1020
Y 500 Z 500 mm
SIEMENS 810 D
TABLE 1250 X 535
2000
18,500 €  
    request
125475396 102

MAZAK SQT 250 MSY for sale
CNC Lathe - Inclined Bed Type


turning diameter: 300 mmturning length: 575 mmcontrol: Mazatrol PC Fusion 640T total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMazatrol PC Fusion CNC 640T CNC controlopposed spin ...
used machine
 
turning diameter: 300 mm
turning length: 575 mm
control: Mazatrol PC Fusion 640T
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m
Mazatrol PC Fusion CNC 640T CNC control
opposed spindle
C-axis at main spindle, spindle orientation at opposed spindle
12-fold revolver
driven tools
Y-axis
automatic part catcher
7,5 bar high pressure pump
tool presetting device (tool eye)
chip conveyor
coolant device.

Technische Daten: / technical details
max. Dreh-Ø / max. turning Ø 300 mm
max. Schwing-Ø / max rotary-Ø 525 mm
max. Schwingdurchmesser über Schlitten / max. rotary diameter over sledge
350 mm
Drehzahl / spindle speed 35-4000 UpM/ rpm
max. Stangendurchlass / max. rod admission 65 mm
Anzahl der Revolverplätze / numbers of tool places 12
Drehzahl angetr. WKZ / speed of driven tools 25-4500 UpM / rpm
X-Verfahrweg / x-travel 180 mm
Z-Verfahrweg / z-travel 575 mm
Y-Verfahrweg / y-travel 100 (+-50)
B-Verfahrweg / b-travel 585 mm
Eilganggeschwindigkeit X, Z / rapid feed X, Z 30 m/min.
Antriebsleistung Hauptspindel 30/100 % ED / drive capacity main spindle 30/100
% ED 18,5/15 kW
Gewicht der Maschine / weight 5900 kg
Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -
Technical data, accessories and description of the machine are not binding.




This ad was created with MODUL MWS - the software solution of LogoTech.
2004
Price  
    request
125479976 103

KUNZMANN UF 6 N for sale
Tool-Milling Machines


TOOL room milling machine KUNZMANN UF 6 N - 07-07-226 delivery: immediately number: 07-07-226 manufacturer: KARSTEN type: UF 6 N MACHINE data year: approx. 1987 L x W x H: approx. 1600 x 1200 x 1800 mm weight: approx ...
used machine
 
TOOL room milling machine KUNZMANN UF 6 N - 07-07-226 delivery: immediately number: 07-07-226 manufacturer: KARSTEN type: UF 6 N

MACHINE data year: approx. 1987 L x W x H: approx. 1600 x 1200 x 1800 mm weight: approximately 600 kg

Very good condition specifications digital display: 3 - axes - digital display HEIDENHAIN traverse paths: X - axis: approx. 410 mm Y - axis: approx. 200 mm Z - axis: approx. 410 mm Tischaufspannï¬?äche: approx. 860 x 265 mm spindle: speed range: approx. 30-2150 U /. min tool holder: ISO 30 power: approx. 3,2 kW tool clamping: manually feeds & express ducts: 3 axes feed range: approx. 0-1000 mm / min rapid traverse: approx. 2.0 m / min accessories â?¢ vertical & horizontal - trimmer â?¢ angle milling head

â?¢ Drilling tailstock (stroke: approx. 60 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ safety handwheels â?¢ feet â?¢ emergency - off â?¢ work light â?¢ various tool holders

Accessories on request price and other specifications on request
1987
Price  
    request
125475336 103

GERARDI T 90cn-2,5 for sale
Angular Drilling Head


Weight approx.: 5 kgDimensions (l x w x h) approx.: 350 x 270 x 170 mmDescription: GERARDI T 90cn-2,5 drill head with collet, swivelling around drive axis by 360°, with SK-40 tool holder, see photos for details

 
Weight approx.: 5 kg
Dimensions (l x w x h) approx.: 350 x 270 x 170 mm
Description: GERARDI T 90cn-2,5 drill head with collet, swivelling around drive axis by 360°, with SK-40 tool holder, see photos for details
 
used machinery auction RESALE 350 €  
  NL   request
125479974 103

DECKEL FP 4 MK for sale
Tool-Milling Machines


TOOL room milling machine cover FP 4 MK - 07-07-225 delivery: immediately number: 07-07-225 manufacturer: lid type: FP 4 MK MACHINE data year: approx. 1988 L x W x H: approx. 2300 x 1800 x 1800 mm weight: approximate ...
used machine
 
TOOL room milling machine cover FP 4 MK - 07-07-225 delivery: immediately number: 07-07-225 manufacturer: lid type: FP 4 MK

MACHINE data year: approx. 1988 L x W x H: approx. 2300 x 1800 x 1800 mm weight: approximately 1750 kg

Very good condition - figure similar to technical data digital display: 3 - axes - active - digital display HEIDENHAIN (TNC 113) 4th axis - digital display (HEIDENHAIN) traverse paths: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Tischaufsp annï¬?äche: approx. 700 x 400 mm spindle: speed range: approx. 50-2500 RPM spindle taper: ISO 40 power: approx. 6,0 kW tool clamping: automatically feeds & express ducts: 3 axes feed range: approx. 8-630 mm / min rapid traverse: approx. 3.0 m / min

Accessories â?¢ 4th axis rotary table â?¢ vertical & horizontal - trimmer â?¢ angle milling head â?¢ drilling tailstock (stroke: approx. 120 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ horizontal - spindle cover â?¢ Sicherheitshan dräder - central lubrication â?¢ emergency â?¢ Tiltable Control Panel â?¢ spindle brake

Accessories on request price and other specifications on request
1988
Price  
    request
125475235 209

BARBERAN for sale
Profile Wrapping Line


Weight approx.: 18150 kgDimensions (l x w x h) approx.: 35520 x 9000 x 11400 mmDescription: consisting of: Pos. 1 Profile Wrapping Machine, BARBERAN, RP-30, 2002 Profile wrapping machine with wooden veneer in strips (opt ...
used machine
 
Weight approx.: 18150 kg
Dimensions (l x w x h) approx.: 35520 x 9000 x 11400 mm
Description: consisting of:
Pos. 1 Profile Wrapping Machine, BARBERAN, RP-30, 2002
Profile wrapping machine with wooden veneer in strips (optionally paper foil from the roll), PVC and low pressure laminates, Machine dimensions: 9000 x 1500 x 1900 mm, 3600 kg

Pos. 2 Profile Wrapping Machine, BARBERAN, RP-30, 2002
Formbeschichtungsmaschine zum Verleimen und Auftragen von Holzfurnieren optional Papierfolien)PVC und Niederdrucklaminaten, Machine dimensions 9000 x 1500 x 1900 mm , 3600 kg

Pos.3 Toupi Module,BARBERAN,MODULO TUPIS, 2005
Suitable for grooving door jambs, Machine dimensions 3100 x 1500 x 2000 mm, 2500 kg

Pos.4 Profile Sanding Machine,BARBERAN, MSK 4 LP-BLD
Includes 2 rollers and tupi axis, Machine dimensions 4120 x 1500 x 1900 mm, 1850 kg

Pos. 5 Cutting Machine,BARBERAN,PCL-20-45, 2002
Machine for the cutting of profiles max length 2500 mm, Machine dimensions 5100 x 1500 x 2100 mm, 3100 kg

Pos.6 Fleece Backing Machine,BARBERAN,RCN-400-2, 2002
Machine for the application of flexible fleece on wooden veneer strips (optionally from the roll) using PVAc glues to grant more resistance while bending veneer to wrap profiles with difficult shapes and sharp edges, Machine dimensions 5200 x 1500 x 1600 mm, 3500 kg

2002
Price  
  ES   request
125479970 103

DECKEL FP 3 for sale
Tool-Milling Machines


TOOL room milling machine cover FP 3 07-07 223 delivery: immediately number: 07-07-223 manufacturer: lid type: FP 3 MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 1500 k ...
used machine
 
TOOL room milling machine cover FP 3 07-07 223 delivery: immediately number: 07-07-223 manufacturer: lid type: FP 3

MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 1500 kg

Good general State technical data digital display: 3 - axes - digital display procedures: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Tischaufspannï¬?äche (Tilt/Swivel table): 660 x 375 mm spindle: speed range: approx. 40-2000 RPM spindle taper: ISO 40 power: approx. 3.8 of kW tool clamping: manually feeds & express ducts: in all 3 axis feed range: approx. 10-500 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ vertical & horizontal - trimmer â?¢ angle milling head

â?¢ Drilling tailstock (stroke: approx. 120 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ horizontal - spindle cover â?¢ safety handwheels â?¢ machine feet

Accessories on request price and other specifications on request
1978
Price  
    request
125475261 101

BUMOTEC S 95-1 for sale
Universal Machining Centre


Weight approx.: 3000 kgDimensions (l x w x h) approx.: 1800 x 2450 x 2450 mmtoolchanger positions: 12 control: NUM 1060/2 (5-Achse) Description: Serial number 2228/1. controled axis X, Y, Z, A and C, pindle holder ISO 30 ...
used machine
 
Weight approx.: 3000 kg
Dimensions (l x w x h) approx.: 1800 x 2450 x 2450 mm
toolchanger positions: 12
control: NUM 1060/2 (5-Achse)
Description: Serial number 2228/1. controled axis X, Y, Z, A and C, pindle holder ISO 30, automatic tool changer for 12 tool holders, swivel table with 2 separately holding devices, holder diameter 100 mm each, centre distance of the two rotary axes 190 mm, machine is equipped with NUM CNC control 1060/2, coolant device with extendable container, suction device, closed protective cabin and electrical documentation (please request these from us after purchase)
1993
used machinery auction RESALE 3,500 €  
  CH   request
125479968 103

DECKEL FP 2 for sale
Tool-Milling Machines


TOOL room milling machine cover FP 2 07-07-222 delivery time: immediate number: 07-07-222 manufacturer: lid type: FP 2 MACHINE data year: approximately 1978 L x W x H: approx. 1600 x 1200 x 1800 mm weight: approximate ...
used machine
 
TOOL room milling machine cover FP 2 07-07-222 delivery time: immediate number: 07-07-222 manufacturer: lid type: FP 2

MACHINE data year: approximately 1978 L x W x H: approx. 1600 x 1200 x 1800 mm weight: approximately 1000 kg

Good general State technical data digital display (optional): 2 or 3 - axes - digital display new procedures: X - axis: approx. 400 mm Y - axis: approx. 200 mm Z - axis: approx. 400 mm Tischaufspannï¬?äche: approx. 700 x 350 mm spindle: speed range: approx. 40-200 0 RPM spindle taper: ISO 40 power: approx. 2.2 of kW tool clamping: manually feeds & express ducts: in all 3 axis feed range: approx. 8-400 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ vertical & horizontal - trimmer â?¢ angle milling head
â?¢ Drilling tailstock (stroke: approx. 100 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ safety handwheels machine feet â?¢ accessories on request price and further technical details on request
1978
Price  
    request
125475308 102

COLCHESTER Tornado 80 for sale
CNC Lathe


Weight approx.: 2300 kgturning length: 350 mmDimensions (l x w x h) approx.: 1600 x 1300 x 1800 mmspindle bore: 54 mmtool taper: VDI 3425/30 Description: COLCHESTER Tornado 80 CNC Lathe - swing diameter over bed covers:  ...
used machine
 
Weight approx.: 2300 kg
turning length: 350 mm
Dimensions (l x w x h) approx.: 1600 x 1300 x 1800 mm
spindle bore: 54 mm
tool taper: VDI 3425/30
Description: COLCHESTER Tornado 80 CNC Lathe
- swing diameter over bed covers: 420 mm
- swing diameter over carriage cover: 280 mm
- max. turned diameter: 170 mm
- x-axis travel: 165 mm
- carriage inclination: 60°
- spindle centre height (from floor): 875mm
- spindle nose: A2-5
- drawtube (bar) capacity: 42 mm
- spindle front bearing (internal diameter): 80 mm
- max. spindle speed (as standard/optional): 4000/6000 rpm
- spindle motor (continuous 30 min. rating): 7,5/11 kW
- min. spindle speed for full motor power: 750/1000 rpm
- X and Z axis rapid traverse rate: 10 and 15 m/min
- X and Z axis thrust (continuous): 3,7 kN and 4,45 kN
- Turret tool disc diameter: 340 mm
- number of tool stations: 12
- turning tool shank dimensions: 20 x 20 mm
- max. boring bar diameter: 32 mm
- travel below centre line: 22 mm
- cross slide width: 213 mm
- width over linear quide ways: 187 mm
- bed width (over linear guide ways): 304 mm
- coolant tank capacity / delivery: 63l / 45l/min at 3 bar
- mains power consumption: 22 kVA
- main spindle should be changed
- for further information see pictures
1996
used machinery auction RESALE 3,200 €  
  DE   request
125479966 103

DECKEL FP 3 for sale
Tool-Milling Machines


TOOL room milling machine cover FP 3 07-07-219 delivery time: immediate number: 07-07-219 manufacturer: lid type: FP 3 MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 150 ...
used machine
 
TOOL room milling machine cover FP 3 07-07-219 delivery time: immediate number: 07-07-219 manufacturer: lid type: FP 3

MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 1500 kg

Good general State technical data digital display: 3 - axes - digital display HEIDENHAIN VRZ 752 B procedures: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Tischaufspannï¬?äche (Tilt/Swivel table): 660 x 375 mm spindle: Drehzahlberei ch: approx. 40-2000 RPM spindle taper: ISO 40 power: approx. 3.8 of kW tool clamping: manual feed & express ducts: in all 3 axis feed range: approx. 10-500 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ vertical & horizontal - trimmer

â?¢ Angle milling head â?¢ drilling tailstock (stroke: approx. 120 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ horizontal - spindle cover â?¢ safety handwheels â?¢ machine feet

Accessories on request price and other specifications on request
1978
Price  
    request
125465272 109

AGIE EXCELLENCE 2F for sale
E2400


State: Machine will be sold refurbished. X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiec ...
used machine
 
State: Machine will be sold refurbished.

X-Axis Travel (mm):
X-Axis Travel (mm):
X-Axis Travel (mm):
Worktank length:
Worktank width:
Worktank height:
Max. workpiece length:
Max. workpiece width:
Max. workpiece height:
Max. workpiece weight:
Taper angle/height:
Automatic Wire Feeding:
Length x width x height:
Weight (kg):
Worked power hours:

The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.
2002
Price  
  FR   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Gluing machines OSAMA S4R/P 1800


Code: 0364 Brand: OSAMA Model: S4R/P 1800 - CE Standard 4 Rollers automatic gluing machine with 2 motors with automatic washer suitable for veneer, laminated, multilayer, doors - CE Standard - Year 2002 Working width mm 1800 Working height mm 0-100 Work surface height mm 890 Spreading roller diameter mm 250 Feed speed mt/min 22 Motor power Kw 3 Overall dimensions: mm 2600 x 1100 x 1500 h Weight kg 1000

Rulli macchine da stampa


Rollers for offset printing machines We are looking for expressions of interest to be submitted within the next 26 June 12:00 Nr. 20 rollers for web offset prints so detailed: Quantity 1 x KBA 618 MAC Quantity 2 x SUNDAY 64P Mac. initials H Quantity 2 x SUNDAY 64P Mac. abbreviation or Quantity 1 x SUNDAY 64P inc. the acronym Quantity 1 x SUNDAY 64P Mac. abbreviation P Quantity 1 x SUNDAY 64 DOS L Quantity 1 x SUNDAY 64 MAC H Quantity 1 x SUNDAY 64 INC the Quantity 1 x SUNDAY 64 INC J Quantity 2 x MHI 48 DOS WP Quantity 1 x Mitsubishi 48P inc. F1 abbreviation Quantity 2 x Mitsubishi 48P inc. acronym F2 Quantity 2 x Mitsubishi 48P inc. acronym F3 Quantity 2 x SUNDAY 64P dos. initials L For more information contact us at 0307751645 during office hours Mon. – Fri. 9-13:14-18

Shinohara 52-4


-Four colours Straight machine max size 37x52 cms. -Year 2008, Only 11 mil. impressions -Semi automatic plate change SPC -Shinohara Alcool continuous dampening with Baldwin cooling unit -Console with CIP 3 software installed, all automatic ink and plate registers PCC -Automatic blankets and rollers washers ABW -In production, any print test possible -Top conditions Included CTP SDP-ECO 1630 III R Platesetter: Computer to plate for plates in polyester and paper ( Silver- Digiplate ) -RIP Mitsubishi SDP-RIP, Intelcore 2 Quad Q 6600, Ram 2 Gb

Band Saw Machines FAT 350


Manual band saw. Cutting capacity: 350mm.

Diesel generators Perkins 2306 - 365 KVA


Diesel generators Iveco V8 - 500 KVA


Mechanical Presses Schuler PSt 250-10-400


Press Schuler PSt 250-10-400 The machine is in good technical condition. Crimping force: 250t Number of Instrument Stations: 8 + 1 Band width: 630mm Band feed: 0-630mm Sheet thickness: max. 4mm Bearing weight: 4500kg External diameter max. 1200mm Internal diameter from-to: 410-480mm Engine 60kW Dimensions of the press: 6225 x 3100 x 8425 mm Including unwinding and straightening equipment and transfer. Upon agreement, possible to test.

Milling machining centres GROB G 320E


SIZE TABLE: 1300 X 800 MM X/Y/Z: 600/655/585 MM SPEED AXES: 90/75/100 M/MIN ACCELLERATION: 7/5/15 M/S2 SPINDLE SPINDLE NO.: TW0 SPINDLE POWER: 29/39 KW SPINDLE SPEED:18000 RPM SPINDLE TAPER: HSK 63 C T S: 70 BAR TOOL ATC: 50 + 50 TOOL MEASURING: YES LONG TOOL: YES CHIP TO CHIP: 2.3 SEC FIXTURE HYDRAULIC FIXTURE: 6 + 6 CONNECTION DIMENSION L X B X H: 4MTR X 3.1MTR X 3.1MRT WEIGHT: 17 TON

CNC Milling Centers DECKEL FP4NC


OVERVIEW: Brand: DECKEL Model: FP4NC Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 28000 Location: Netherlands Origin country: Germany CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 450 mm

CNC Punching Machines AMADA EUROPE 255


OVERVIEW: Brand: AMADA Model: EUROPE 255 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2005 Production hours: 31646 Location: Spain Origin country: France CONTROL UNIT: Brand: GE FANUC Model: Series 18i-PB MOVEMENT: X-AXIS: Movement: 1250 mm Y-AXIS: Movement: 1250 mm

HEIDELBERG SORM


D189 HEIDELBERG SORM (year 1991) SN 533289 / Format 520 x 740mm/ Alcohol dampening with Technotrans / Weko T6 powder spray / Suction drum in delivery / App. 51 mio. Impressions. Machine in very good working condition, free of damages. Available: Immediately. (test is possible) Location: Belgium

HEIDELBERG MO-E


D150 HEIDELBERG MO-E (year 1990) SN 609450 / Format 480 x 650mm / Conventional dampening / Weko T6 powder spray / Suction drum in delivery / App. 28 mio. Impressions. Machine in very good working condition, free of damages. Available: Immediately. (test is possible) Location: Belgium

Adast Dominant 547 P


Adast Dominant 547 P 4 color size 38 x 52 cm standard dampening Inkflow-ink and register remote control in production good condition

MACCHINARI ATTREZZATURE


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 MACHINERY: -5 Slot machines -lot composed # 4 Jukebox with cd -Electric linkage ARMANNI MASTER LIGHT 105/29, capacity kg 1000 of 2001 -pallet truck 2000 kg pallet truck 2000 kg -lot workshop Equipment: -metal shelf L = 120, 6 2 uprights and shelves -Iron shelving, shelves and uprights 48 16 L = 120 -iron and wood stair with landing, 4 risers, trundle -Blue iron rack, 3 uprights H = 300, 2 uprights H = 250, 26 traverse L = 150 and 2 crossbars L = 120 -aluminium staircase with landing -Blue iron shelving H = 300, 21 2 uprights, crossbars L = 200, 118 traverse L = 120, 14 traverse L = 150....... ETC, etc, etc. -detailed catalogue Available.

Milling machining centres MORI SEIKI MH-633


OVERVIEW: Brand: MORI SEIKI Model: MH-633 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 2008 Production hours: 9500 Location: Czech Republic Origin country: Japan CONTROL UNIT: Brand: MORI SEIKI Model: MSX-502III MOVEMENT: X-AXIS movement: 1050 mm Y-AXIS movement: 850 mm Z-AXIS movement: 920 mm

EDM Machines Makino EDNC65


OVERVIEW: Brand: Makino Model: EDNC65 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 2004 Production hours: 15330 Location: China Origin country: Singapore CONTROL UNIT: Brand: Makino Model: MGH III MOVEMENT: X-AXIS: Movement: 650 mm Y-AXIS: Movement: 450 mm Z-AXIS: Movement: 350 mm

EDM Machines Makino EDNC65


OVERVIEW: Brand: Makino Model: EDNC65 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1995 Production hours: 25185 Location: China Origin country: Singapore CONTROL UNIT: Brand: Makino Model: MGF20 MOVEMENT: X-AXIS: Movement: 650 mm Y-AXIS: Movement: 450 mm Z-AXIS: Movement: 350 mm

Bag packing machines SMIPACK HA 50


Automatic fitter wings Production/Cadence: 50 PPM dimensions appx. 3520 x 1055 mm

CNC Turning Machines Colchester TORNADO 200


OVERVIEW: Brand: Colchester Model: TORNADO 200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1995 Production hours: 5900 Location: Germany Origin country: England GENERAL DATA: Measurements width: 2455 mm Measurements depth: 1420 mm Machine weight: 3000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE FANUC Model: Series O-T MOVEMENT: X-AXIS movement: 215 mm Z-AXIS movement: 400 mm WORKPIECE: Workpiece drm: 250 mm TURRET: Number of turrets: 12 TOOLS: Max tool diameter: 40 mm MEDIA: Power consumption: 45 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 29x Tool holder

ARREDI E MACCHINE UFFICIO


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 Furniture: -fixed Chair in technical fabric and iron -two-seater sofa in blue fabric -Cabinet height = 140 with two laminated doors -double L-shaped desk workstation wood laminate -work station with double circular wood laminate desk with Appendix -L-shaped desk with wood laminate drawer unit -laminate and wood coloured iron -Cabinet with one door L = 215. ... ... ETC, ETC, ETC.

CNC Bending Machines Durma AD-S 30100


OVERVIEW: Brand: Durma Model: AD-S 30100 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2013 Production hours: 18979 Location: Turkey Origin country: Turkey GENERAL DATA: Measurements width: 2600 mm Measurements depth: 4500 mm Measurements height: 3100 mm Machine weight: 9500 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3050 mm CONTROL UNIT: Brand: CYBELEC Model: ModEva 10S MEDIA: Main electronic connection: 400 V Power consumption: 11 kVA ADDITIONAL EQUIPMENT: 1 - Tools 2 - Back Guard with safety switch 3 - Laser Light Front Guards

Macchina utensile per lappatura ACCU-CUT 6SM I ACCU-CUT 6SM I


TECHNICAL CHARACTERISTICS: Bore-maximum: 1.5 ", piece Size-Max OD: 5.0", Distance between spindles: 5,166 ", 6, 8 index Stations: spindles: Index table diameter: 20 "Center from column to table: 13-1/2" Spindle motor: HP 7-1/2, spindle speed: 1200 rpm, variable Feed Rate: 0-200 IPM, Machine dimensions: 58 "(L-R) x 73" (F-B) x 96 (H) Cooling system size: 36 "w x 36" W x 36 "H, Gxsumz2 Weight-approx: 5,500 pounds.

CNC Bending Machines AMADA SPH-30C


OVERVIEW: Brand: AMADA Model: SPH-30C Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 1989 Location: Estonia Origin country: Japan GENERAL DATA: Measurements width: 1000 mm Measurements depth: 1575 mm Measurements height: 2230 mm Machine weight: 2450 kg MAIN DRIVE: Pressing force: 300 kN Bending length: 100 mm CONTROL UNIT: Brand: AMADA MEDIA: Main electronic connection: 230/400/460 V / 50/60 Hz Power consumption: 3 kVA

Wire EDM Machine AGIE AGIECUT EVOLUTION 3


X-travel: 500mm, y-travel: 350mm, z-travel: 256mm, max. workpiece dimensions: 1050x550x250mm, max. workpiece weight with/without bath: 400/800kg, control: AGIEVISION, operational hours: ca. 130000h, including handling robot EROWA EASYHAND ROBOSET RS UNO-L.

Milling machine centers MORI SEIKI MV-45/40


OVERVIEW: Brand: MORI SEIKI Model: MV-45/40 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1986 Production hours: 28000 Location: Netherlands Origin country: Japan GENERAL DATA: Measurements width: 3800 mm Measurements depth: 3500 mm Measurements height: 3150 mm Machine weight: 8000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 6000 1/min CONTROL UNIT: Brand: Fanuc Model: 11M MOVEMENT: X-AXIS movement: 800 mm Y-AXIS movement: 460 mm Z-AXIS movement: 510 mm WORKPIECE: Workpiece drm: 160 mm Workpiece weight: 1000 kg TABLE: Outer length: 1200 mm Outer width: 460 mm TOOLS: Max weight: 20 kg Max tool diameter: 95 mm Max tool length: 300 mm MEDIA: Main electronic connection: 380 V Power consumption: 22 kVA Chip conveyer: yes Internal cooling: yes

Turning Machines (Lathes) Pinacho SE-200


OVERVIEW: Brand: Pinacho Model: SE-200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2014 Location: Spain Origin country: Spain GENERAL DATA: Measurements width: 1100 mm Measurements depth: 1875/2150 mm Measurements height: 1825 mm Machine weight: 1300 kg MAIN DRIVE: Number of spindle: 2 Spindle speed range: 2800 1/min CONTROL UNIT: Brand: SIEMENS Model: SINUMERIK 808D WORKPIECE: Workpiece drm: 402 mm TOOLS: Max tool diameter: 20 mm

Generators Atlas Copco QAS 200 VD


4 identical units available Electronic speed control: 50 HZ / 60 HZ Motor: 6 cylinder Volvo Diesel Motor type: TAD 733 GE Motor power: 179 kW / 50 HZ continious power Alternator: Mecc-Alte ECO 38 - 3S/4 Continious power: 200 kVA Hours of operation: Approx. 5500/6400/6600/7100 - April 2018

Generators Atlas Copco QAS 150


2 identical units available Electronic speed control: 50 HZ / 60 HZ Rated speed: 1500 / 1800 rpm Continious power: 150 / 165 kVA Net power: 132 / 140 kW Motor: 6 cylinder Volvo Diesel Motor type: TAD 731 GE Alternator: Mecc-Alte Hours of operation: Approx. 5900 and 6900 / April 2018

CNC Bending Machines Gasparini PBS 135/4000


OVERVIEW: Brand: Gasparini Model: PBS 135/4000 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2003 Location: Spain Origin country: Italy GENERAL DATA: Measurements width: 4250 mm Measurements depth: 1700 mm Measurements height: 2750 mm Machine weight: 14000 kg MAIN DRIVE: Pressing force: 1350 kN Bending length: 4000 mm CONTROL UNIT: Brand: Delem Model: DA-65 MEDIA: Main electronic connection: 380 V / 50 Hz Power consumption: 15 kW

Gas engines MAN E 2876 LE 202


Power: 220 kW Rotation speed: 1500 1/min. Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.

Gas engines MAN E 0836 LE 202


Power: 110 kW Rotation speed: 1500 1/min Suitable generator, gas control line, exhaust heat exchanger and value heat exchanger available, price on request.

Belt Filter Press Rompf KRF 1700


Bandwidth: 1700 mm Throughput: Approx. 5 - 12 m3/h Scope of delivery: Control cabinet Powder polymer system Transverse conveyor 2 Eccentric screw pumps The belt filter press is dismantled and immediately available.

Steam Turbine Backpressure Turbine B+V Industrietechnik MARC 2 - B10


Power: 9210 kW Live-steam pressure: 73 bar Live-steam temperature: 520° C Extraction pressure: 16 - 20 bar Exhaust steam pressure: 1,5 - 2,5 bar Generator: LDW GmbH 14040 kVA Trafo 15000 kVA

Smoke chamber Vemag 2 trolleys


Condition: Overhauled Technical data: • overall dimensions 1600x2500x2900 mm; • 2 trolleys 1000x1000x2000 mm; • power heating 52 kW; • power supply 400 V; • computer control Mikster; • smoke generator Fessmann RZ550 115; • smoke generator dimensions 550x1200x1580 mm; • power engine 0.7 kW; • power heating 1.0 kW.

Gear Grinding Machines HOFLER PRIMA H 1000 E


Gear max. wheel diameter 1000 mm gear width 530 mm max. module 18 min. module 1,5 max. number of teeth 195 min. wheel diameter 300 mm

Universal Milling Machines HURON MU6


Universal millich machine HURON MU6 Travels x y z 1500 x 700 x 550 mm Table size 2000 x 460 mm Universal milling head 3 Axis Dro

Stretching blowing machines ASB NISSEI ASB-650EXHS


WE HAVE STRETCH BLOW MOLDING MACHINE 650EXHS WITH USED 3 MOLDS. WE SELL THEM AT ONE TIME TO THE EXPORTING ONLY. PSL. SEE IT GJCHOI OF GNB TECH IN KOREA, WE CAN SHIP IT NOW.

EDM Machines Makino EDNC43


OVERVIEW: Brand: Makino Model: EDNC43 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1994 Production hours: 26280 Location: China Origin country: Singapore CONTROL UNIT: Brand: Makino Model: MGF20 MOVEMENT: X-AXIS: Movement: 450 mm Y-AXIS: Movement: 350 mm Z-AXIS: Movement: 350 mm

Injection molding machines sumitomo japan ( electirc SE130EV-C360HP


WE HAVE SUMITOMO FULL ELECTRIC 130TON AS FOLLOWS INFORMATION. 1. MODEL: SE130EV-C360HP 2. Q'TY: 2 UNITS ( ONLY MACHINE ) 3. MFG.YEAR 2013 APR. 4. SCREW DIA. 25MM 5. ORIGINAL MACHINE NAME PLATE. PLS. CONTACT GJCHOI OF GNB IN KOREA

Bottle Sorting System MIHO Multicon-K


For detecting and sorting of up to 16 bottle types, connected load: 250VA, including roller conveyor.

EDM Machines Makino EDNC106


OVERVIEW: Brand: Makino Model: EDNC106 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1992 Production hours: 37960 Location: China Origin country: Japan CONTROL UNIT: Brand: Makino Model: MGC3 MOVEMENT: X-AXIS: Movement: 1000 mm Y-AXIS: Movement: 600 mm Z-AXIS: Movement: 500 mm

EDM Machines Makino EDNC85


OVERVIEW: Brand: Makino Model: EDNC85 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1990 Production hours: 40880 Location: China Origin country: Japan CONTROL UNIT: Brand: Makino Model: MGW-JL MOVEMENT: X-AXIS: Movement: 800 mm Y-AXIS: Movement: 500 mm Z-AXIS: Movement: 400 mm

Self-Cleaning Disc Separator Alfa-Laval BRPX 617


Clarifier design, centripetal pump liquid discharge. It is used for removing suspended solids with particle sizes from approximately 0.5 to 500 ?m from a liquid having a lower specific gravity than the solids. The solids content in the feed is normally in the range of 0.1-10 % by volume, but can vary between different duties CONTROL Cabinet available

bending pipe tube profile machine Tauring Delta 60 I CNC


production year 2011, 2012 first launch, new, maybe 5 hours the rolls were made to order for a special profiles from PVC/alluminium, there are no standard rolls on offer. The machine was bought with the appropriate rolls but it turned out that they are not suitable for a PVC/all. profiles for window joinery. abc.tauringroup.com/sites/default/files/delta60_low_0.pdf

EDM Machines Makino EDNC65


OVERVIEW: Brand: Makino Model: EDNC65 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1995 Production hours: 28185 Location: China Origin country: Japan GENERAL DATA: Measurements width: 3500 mm Measurements depth: 2800 mm Measurements height: 3000 mm Machine weight: 18000 kg MAIN DRIVE: Working current: 60 A Wire feed: 3000 mm/min CONTROL UNIT: Brand: Makino Model: MGF20 MOVEMENT: X-AXIS: Movement: 650 mm Y-AXIS: Movement: 450 mm Z-AXIS: Movement: 350 mm WORKPIECE: Workpiece weight: 1500 kg TABLE: Outer length: 800 mm Outer width: 550 mm MEDIA: Main electronic connection: 380 V

Pipe Bending Machines BLM SMART


OVERVIEW: Brand: BLM Model: SMART Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2015 Production hours: 948 Location: Estonia Origin country: Japan GENERAL DATA: Machine weight: 720 kg CONTROL UNIT: Brand: SIEMENS Model: SIMATIC HMI MEDIA: Main electronic connection: 400 V Power consumption: 11 kVA ADDITIONAL EQUIPMENT: 1 - BLM CARM7 Bar loader 2 - YASKAWA Motoman Robot

Vertical Milling Machines DECKEL FP4A


OVERVIEW: Brand: DECKEL Model: FP4A Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 32000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 3000 mm Measurements depth: 2700 mm Measurements height: 1630 mm Machine weight: 1950 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 390 mm WORKPIECE: Workpiece drm: 80 mm Workpiece x: 485 mm Workpiece y: 385 mm Workpiece z: 380 mm Workpiece weight: 800 kg TABLE: Outer length: 900 mm Outer width: 530 mm TOOLS: Max weight: 450 kg Max tool diameter: 40 mm Max tool length: 150 mm MEDIA: Main electronic connection: 380 V Power consumption: 16.5 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 1x Tool holder

Profile rollers SAF SE 101 HP


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Hydraulic Presses Compac HP 60


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Band Saws Imet / Tuwi BS 280 plus


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions
Find used machinery dealers in your country