5 axis universal used for sale

Capper BERTOLASO - KAPPA 508 • Year: 1994 • Speed: 9.000 bph • Direction: Clockwsie • 8 heads – plastic upper cap • Safety protections

Make: GEA Küba Germany Type: CAV N09-2X3C Power: 606/497 kW (star/triangle connection) Pipe capacity: 209l 2 split circles with 3 fans each 6 fans a 900mm diameter

1 Hubgeruest from the Still R70-45 forklift truck without free stroke Lifting capacity 4,500kg with side slider and fork tine adjustment incl. hydraulic slurs Building height 280cm, weight approx. 800kg Price 2,400.-EUR 2. Lifting truck from the Linde E15 forklift Lifting capacity 1500kg Building height approx. 220cm with side slider Price 450.-EUR 3. Duplexhugeruest Hyster XL4.00 without free stroke Lifting capacity 4000kg Building height approx. 400cm with fork-traeger Price 2,650.-EUR Forklift Hubger Mast Mast Forklift Truck Hyster Linde Kalmar Still H80D R60-45 R70-45 E15 E20 DCD90-6 DCD 100-6 DCD 120-6 Special price

We offer for sale: 1 x gebr. Rack protection for post SSI Schäfer PR 600 / 100 mm or 90 mm Color: yellow Height: 760 mm Width: 100 / 90 mm

Shock evaporator, TK evaporator ECO 54B12, with 4 fans, Y.O.M. 2013 with 12 mm slats for shock.with defrosting heating. Power in KW 45.

Pasteuriser Volume Capabilities :100-500 Litres Control Panel (controls, thermometer controller, ON/OFF agitator) Temperature regulator (Chart recorder on request) Heated by :Heating elements -Hot Water Milk Pasteurisation temperature : 68-75c Max Temperature : 95c Cooling down by connection to chiller or ice bank Heating time : Between 30-1hr depending on capacity . Cooling time: Depending on cooling temperature Complete S/S structure Controls and temperature recording Condition : NEW Delivery : 5 weeks from Order

Central vacuum cleaner #5375 Puer Pro 5 SR Power 14 kW

Central vacuum cleaner #5374 Puzer Pro 5 SR Power 14 kW

BETOMIX PADDLE MIXER Concrete/BETON Mixer. Two Engines Two Gearboxes

A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Equipment layout plan + cip system . pdf 1 Glatt GC 750/500 coating unit - drive motor : 1,1 kW - 380 V - 50 hz - IP 54 - Ex - air inlet fan : 1000 m3/h - 6860 rpm - 2003 Pa - Max 80?C - 1,1 kW - IP 54 - air outlet fan: 1200 m3/h - 2900 rpm - 1030 Pa - Max 80?C - 7,5 kW - IP 55 - Drum speed: 2 - 18 rpm - Sold with two perforated drums ?500mm and ?750 mm - Adaptable 2-head spray arm + Peristaltic pump - Spare parts, seals, ... - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h 1 Air treatment unit 1 Wanson CD-36 steam boiler - Power: 36 kW - Steam output: 48 kg/h - Operating pressure: 5 bar - Temperature : 159?C - Water volume: 10 L  ...

Heraeus V?tsch Climatic chamber VTRK 500. Inner dimensions 745 x 880 x 765mm. Capacity 500L. Door with porthole 350 x 350 / wipers Temperature 10-90?C. Fridge unit in the lower part, under the enclosure Space for storage tank approx. 10l of distilled water. Electrical power 3.1 kW / mono 220 V Overall dimensions: 1100 X 1400 X 2100

Very nice Ryobi 524GX, year 2007, 28 mil, autoplate, all wash systems, Alcolor dampening , max 0,6 mm paper

Ryobi 522HE year 2008 Impressions 22 mil Semi-Automatic plate change, Technotrans Refrigeration, Automatic Blanket Cylinders & Inking Rollers washing devices Powder spray, Double Sheet & Side lay Detector Numbering and Perforating unit

Ryobi 524GX L 78 mil Autoplate all wash units Ryobimatic dampening Technotrans Alpha-d Refrigeration System Double Sheet & Side lay Detector Tower coater with Doctor Chamber Blade IR dryer Powder Sprays Grafix Digital Extanded delivery PCS-H PDS-E

Manufacturer: Kawasaki FD 50N, Year: 2007, Max workpiece weights kg: 50, System dismantled: yes, Year :2007

Type: VLT 5000,

Manufacturer: SEW Mowiedrive Compact MDX60A0110-503-4-00, Type: MDX60A0110-503-4-00, Sale without warranty: 16,8 KVA, No right of return: 0-180 Hz, Installation height: 24 Ampere,

Containers for powder and capsules. Total volume: 500 litres Useful volume: 300 litres according to manufacturers plate Quantity : 12 Polished stainless steel 316 Pyramidal bottom Total opening Lid Drainage trapdoor 150 x 150 Overall dimensions 750 x 750 x 1350

Ryobi 522GX year 2007 50 mil autoplte all wash units 0.6 mm max paper ryobi matic dampening in very good condition immadiately free

Screw diameter: 55 mm Injectable volume: 515 cm3 Injectable weight: 460 g Injection pressure: 2400 g Column width: 1020 x 920 mm Aperture stroke: 900 mm Mould thickness: min: 600 mm - max: 1050

Vibratory dust collector combined with a Lock combi Li metal detector Product: tablets 4 - 25 mm Brand : Pharma technology Model: 500 Year: 2002 Conveyor speed : adjustable Power supply : 230 V Brand : LOCK INSPECTION SYSTEMS Model : MET 30+ Power supply : 230 V Ejector for non-conforming products. Technical information: Combi 500 Li Adjustable output height (B) 760 mm Tablet inlet size 120 x 35 mm Tablet outlet ? 52 mm Min. tablet size ? 4 mm Max. tablet size ? 25 mm Adjustable conveying speed Average conveying time +/- 60 sec Required suction connection 200m3/H-WS 200 mm Suction connection ? 52 mm Metal detector passage dimensions: 95 x 38 mm Examples of output rates : Round tablets ? 6 mm 2 000 000 compr./H Round tablets ? 8 mm 500 000 tablets /H Round tablets ? 13 mm 320,000 compr./H 8mm x 4mm oblongs 500 000 compr./H 19mm ? 7mm slotted tablets 150, ...

Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Filling heads available Recovery tank Drain hoses installed on photos. Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars

Manufacturer : Th?mis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A BOFA vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control compute ...

Manufacturer: Sevin Type : Mixing tank / disperser. Materials : Vessel + double jacket + heat insulation: stainless steel Feet + stirring support in steel. Volume: 575 L total / 500 L useful Jacket: steam / liquid Manual central drain 2 lids / inspection hatch Mixing tool: dispersion rotor ? 250 mm Motor power : 1,1 KW - 1500 rpm Transmission : 3 x belts (new)

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

Linear unit, linear axis, portal axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper REXROTH INDRAMAT Type: MKD0771B-061-KP1-KN Ident No. 247238 0001 Year of construction: 2000 Axis movement: 2400 mm Carriage length: approx. 500 mm Total length: 3520 mm- pneumatic feed pliers (clamping pliers with 2 Festo compressed air cylinders) - Standard linear guide 65 x 25 mm - Basic profile made of steel - Ball screw 32 x 10 mm- pneumatic with position indication - permanent servo motor type: MKD071B-061-KP1-KN (Part No: 261989, S. Nr. MKD071-50234, brake with 24 Volt DC) Overall dimensions L x W x H: 3520 x 400 x 580 mm Weight: 340 kg good condition; used

3-axis welding station including 6-axis robotic arm complete with extraction hood and torch cleaning fume purification

Timing belt axis linear module INA MDKUVE 15-500 3 ZR AL 05-858-526 Working stroke: 1 490 mm carriage: 500 x 176 mm flange (drive): 115 x 115 mm shaft: Ø 28 mm used, tested ! Dimensions: 2210 x 28 x 130 mm

S/s table, dimensions: 500 mm x 500 mm x 500 mm.

5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent

5-axis controlled fraescenter Control: E 160 CNC Travel distances: X 1,050 mm Y 420 mm Z 420 mm spindle holder: ISO 40 spindle drive power: 9 kW spindle speeds: 4,000 rpm. Gear levels: 2 spindle torque: 450 Nm tool magazine positions: 15-speed pick-up magazine Zubehoer: 2-axis clamping device for parts, ISO 50; Vertical frause head ISO 40; Full cladding; tool magazine pick-up for 15 tools; SEHR WENIG USED; WORKING ONLY WITH OeL !; Excellent

- Arbeitsbereich X - Achse 1300 mm - Arbeitsbereich Y - Achse 2500 mm - Arbeitsbereich Z - Achse 400 mm -B- Achse Frässpindel ist +/- 90C parallel zu X-Achse schwenkbar - Frässpindel luftgekühlt 5,5 kw - Spindel Drehzahl stufenlos 18.000 rpm - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren Delta / YASKAWA - SHIMPO Getriebe Antrieb - max. Verfahrgeschwindigkeit 40 m/min - max. Arbeitsgeschwindigkeit 20 m/min - Arbeitsgenauigkeit 0.05 mm - Vakuum - Rastertisch mit 4 Sektionen und T-Nuten - BECKER Vakuumpumpe trockenlaufend, luftgekühlt, Leistung 129 m3/h - Werkzeuglängen Sensor - CAD/CAM Software DDX EasyWOOD Standard - Steuerung OSAI - Schnittstelle Ethernet/USB/CompactFlash Card - Sicherheitslichtschranke Vorschrift nach EN 848-3 (Optional einseitig, zweiseitig oder dreiseitig je nach Aufstellungsgeg ...

KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...

SPINNER U5-620 5-Axis Machining Center. Still in use, under power. 5-axis universal machining center with integrated 2-axis CNC turning tilting table maximum table load 250 kg. Both rotary axes are used as well as interpolating milling axes. Color monitor 15 and shop-Mill software version 7.1, C-axis 360°, B axis +5° (+50°) / -110°, blow-out device for spindle taper, 26 bar high pressure centrally true the milling spindle including paper filters, linear guide in all three axes, chip conveyor, splash guard full fairing, coolant system, cabin light, hydraulic clamping for turn and tilt axes, both rotary axes are equipped with direct measuring system, spray gun in the work space, Sinumerik 840 D-SL option residual material detection and processing. in kg: about 5000 | year of manufacture: 2009

Linear axis for KUKA KR6/16 KUKA KL1000 CV high Built in 2007 Length 4500mm .

Linear axis for KUKA KR15, KR6 Length 2m .

Rice Robotics incl 2 x 2 axis robot control cabinet / control absolutely mint condition Year 2009 (ca 300 hours run) Height approx. 2.0 m Width ca of 4.0 m consists of: 2 columns 1 driving beam 2 x 2 axle robot 2 Robotics control cabinets Switching and control documents

Bellows for Mikron Fraesmaschine WF3 (WF3SA)Z-Axis

Control MSX-711-MAPPS IV Double pallet changer. Pallet diameter 500 mm. 2 axes NC swivel round table. B-axis 0.001 / 360. A axle +30/-120 - 0.001. travel distances: X 730 mm, Y 850 mm, Z 1,100 mm. preshoot/ejem up to 50,000 mm/min. Spindle holder HSK-63A. Spindle speeds up to 12,000 rpm. Tool magazine positions: 120. IKZ. Probe. tool load measurement. tool breakage control. usw... Little operating hours - Super condition.; Super

MSX-711-MAPPS IV CNC Control Twin pallet changer. Pallet diameter 500 mm. 2-Axis NC Rotary / Swivelling table. B-Axis 0.001° / 360°. A-Axis +30°/-120° - 0.001°. Travels : X 730 mm, Y 850 mm, Z 1100 mm. Feeds / Rapids to 50000 mm/min. Spindle taper HSK-63A. Spindle speeds to 12000 rpm. 120 station tool magazine. Coolant through the spindle. Measuring probe. Tool length measurement. Tool breakage control. etc... Low run hours - Superb condition. ; Super

Capacitive: 60 kg 6 axes simultaneously controlled by Fanuc Teach-In System ; Very good

Capacity : 60 kgs. 6-axis simultaneously controlled by Fanuc Teach-In System ; Very good

under current Details on request

FMS SYSTEM: Machining Cell consisting of: Two 5-Axis machining Centres 8-Pool Pallet System(1250 x 1250mm x 3.000kg) Pallet Storage System X= 3.000 mm, Y= 2.000H/1.720V, Z= 2.000mm; A= 175°, B=0,001°; 640 Pos. ATC ; Spindle Taper HSK-A100; Spindle n= 3.000; Motor 50kW; Feeds: X,Y= 40m/min, Z= 30m/min Siemens 840D, Chip-conveyor; Serial No. 1450-03 and 1451-3, both from 2003 FR: À VENDRE MAINTENANTFMS SYSTEME ; 8 Pos. Piscine à palettes (1250 x 1250mm x3.000kg). 2x MCM Jet Five Mirror 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS, X= 3.000, Y= 2.000H/1.720V, Z= 2.000mm ; A= 175°, B=0,001° ; 640 Pos. ATC ; Cône de broche HSK-A100 ; Broche n= 3.000 ; Moteur 50kW ; Alimentation : X,Y= 40m/min, Z= 30m/minSiemens 840D, convoyeur à copeaux ; numéros de série 1450-03 et 1451-3, à partir de 2003

FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C

Table size X 5300 Y 1300 mm 800 mm wide waste outfeed conveyor 2 CNC Z axes Drilling head with 21 vertical drill spindles and 4x2 horizontal drill spindles with integrated grooving saw rotatable through 90° Extraction shoe for the vertical drill spindles and chip & dust extraction of the horizontal spindles integrated in the drilling head 10 kW main spindle, vector-controlled a 3600 C axis, fully interpolating

FANUC M6IB 6S (year 2006) Available: (1) M16IB + FANUC SYSTEM R J3IB Controller + console (1) M16IB + FANUC SYSTEM R J3IB Controller The FANUC M-6iB/6S is a short arm for tight, confined spaces. The robotic arm of the M6iB/6S RJ3iC is used to treat products where parts sizes and envelopes are of little concern. The M 6iB/6S can perform acute, lightweight material handling with a repeatability of +/- 0.08 mm and a maximum payload capacity of 6 kilograms. Robot Specifications Axes: 6 Reach: 900mm Repeatability: ±0.08mm Robot Motion Speed J1 - 200 °/s (3,49 rad/s) J2 - 200 °/s (3,49 rad/s) J3 - 260 °/s (4,54 rad/s) J4 - 400 °/s (6,98 rad/s) J5 - 400 °/s (6,98 rad/s) J6 - 720 °/s (12,57 rad/s) Robot Motion Range J1 ±170° J2 ±125° J3 ±155° J4 ±190° J5 ±140° J6 ±360°

CAN axis motor -Type: PSE 4225 DP-M -Dimensions: 175/115/H65 mm -Weight: 2 kg

Crawler axle, crawler chassis, mini excavator, chain excavator -Wheel: Ø 290 mm -Guide: 70 mm -Feather -Clamping cylinder