4 side used for sale

PLC control, digital output, digital output, relay output -Manufacturer: Siemens, Simatic S5 digital output 2 pieces -Type: 6ES5 441-8MA11 -Bus module: Siemens 6ES5 700-8MA11 -Number: 6x double module available -Price: per piece -Dimensions: 160/90/H125 mm -Weight: 0.7 kg/piece

automatic baler Manufacturer: HÖMA Type: BP 4000 PA Year of construction: 08/1991 Technical Data: Press force: 40 t Filling opening: 1,350 x 820 mm Bale size: 755 x 900 x 600 - 1,200 mm Bale weight: up to approx. 400 kg Setting: 4-fold horizontal Transport dimensions: Length: approx. 5,650 mm Width: approx. 2,200 mm Height: approx. 2,350 mm Weight: approx. 6,180 kg

PLC control, digital output, digital output, relay output, relay output -Manufacturer: Siemens, Simatic S5 digital output 2 pieces -Type: 6ES5 441-8MA12 -Number: 4x double module available -Price per piece -Dimensions: 160/90/H125 mm -Weight: 0.7 kg/pc

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Input: 3x 380..500 V~ -10% 6% 50/60 HZ -Output: 3x (0-220/240) V~ 0..180 Hz 9.5A~ 400V -Dimensions: 100/340/H270mm -Weight: 4.7kg

Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: EPA, Contactor -Type: NF-S-412451 -Number: 2x contactors available -Price: per piece -Dimensions: 90/35/H60 mm -Weight: 0.2 kg/piece

greates pass round over bed: 480 mm swing diameter over bed slide: 300 mm turning length: 1500 mm centre height: 240 mm centre distance: 1500 mm spindle bore: 42 mm spindle turning speed range: 14 - 1400 U/min total power requirement: kW weight of the machine ca.: 2,4 t dimensions of machine L x W x H: 3,00 x 1,05 x 1,40 m Accessories: 3-jaw chuck 250 mmø, MULTIFIX-head, running center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, geared motor with brake -Type: SK 530SU-80S/4BRE8 -Speed: 93 rpm -Power: 0.55 kW / 1380 rpm -Shaft: Ø 25 x 45 mm -Protection class: IP54 -Brake: 8 Nm -Dimensions: 435/200/H240 mm -Weight: 21 kg

T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg

cutting width: max. 250 mm Cutting height: max. 80 mm Saw blade diameter: 400 mm Motor output: 3,0 kW turning speeds: 2800 U/min Required air-pressure: 6-8 bar work height max.: 900 +-20 mm mm Dimensions (L/W/H): 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw -------------------------------------------------- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system t ...

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg

Machine light, machine lamp, work area light, system light, compact light, control cabinet light -Manufacturer: Rittal, control cabinet light type PS 4112 -Voltage: 220 V 20 W -Number: 2 lights available -Price: per piece -Dimensions: 625/40/H100 mm -Weight: 2 kg/piece

Bread Slicer Circular Knife Machine Wabäma Model: R 400 The all-rounder among bread slicers max. number of slices: 140 pieces/min. max. bread dimensions: 420 x 320 x 140 mm, WxDxH Circular knife machine with bread halving Counter and preset for number of discs with integrated drawer Circular knife made of high-quality Teflon special coating Machine mobile with brake Cutting thickness adjustable from 4 to 25 mm Connection 400V, 1.1 kW, 16A-CEE plug Dimensions: 800 x 720 x 1110 mm, WxDxH Used machine cleaned with 3 months warranty Many more bread slicers in stock!

Fieldbus, Profibus, PLC control, automation technology, controls and regulators, end module, fieldbus controller, PLC terminal, digital input terminal -Manufacturer: Wago, digital input terminal from Demag D 100-275 NC injection molding machine -Type: 750-400 -Dimensions: 70/15/H100 mm -Weight: 0.1 kg

Hydraulically driven diamond wire sawing machine. - Vertical wire sawing machine, combined with a swivel arm, for sawing various stone materials such as granite, marble, basalt, as well as concrete and artificial stone by means of a diamond rope. The machine is suitable for hand-held straight cuts, for hand-held cutting of circles with the circular cutting device and for hand-held cutting of free contours with the copying device. With the optional arc cutting device, semi-circular workpieces can be sawn fully automatically from a block of stone (a sheet template is required for each radius). With the optional saw frame tilting device, bevel cuts of up to 45° can also be made. Maximum cutting width in the projection of the machine 490 mm The maximum workpiece height that can be sawn with the machine is a maximum of 550 mm, depending on the material to be sawn. Swivel arm to ...

Hollow core granulator and re-cutting mill for pre-shredded material Rotor 450 mm diameter x 600 mm working width 3 rotor blades (bevel cut), 2 stator blades Drive motor 22 kw

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-4020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1850.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems T ...

Control machine, monitor, control tool master -Manufacturer: Wieder, Monitor Tool Master TM -Type: WPC-ES-486, (133-1.2-L-9.4-T) -Dimension: 300/160/H215 mm -Weight: 6.7 kg

Display, display module, display panel -Manufacturer: Regloplas, display panel type RT45-Geh -Art. No.: 45750 -Dimensions: 130/100/H100 mm -Weight: 0.9 kg

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 100A -Quantity: 2x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg/pc.

Year of construction: 1991 with double head 70 mm stitch Clamping force: 18 kN Machine is in good condition, and has few operating hours

Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...

Anton Paar DM 4500 Density Measuring Device Option: RXA 170 refractometer Density determination measuring range 0.6-2g/cm3 Temperature range 5-70 Celsius Sample quantity 1 ml Price without RXA 170

WE OFFER AN EXCELLENT STAMA , JUST PERFECT CONDITION WITH TOOLS STAMA TECHNICAL DETAILS MACHINE DATA Machine type: Machining center Manufacturer: Stama Model: MC 526 Compact Machine number: KMM 526 1508 Year of construction: 2005 Condition: used Functionality: fully functional TECHNICAL DETAILS Travel distance X-axis: 1,000 mm Travel distance Y-axis: 400 mm Travel distance Z-axis: 360 mm Rapid traverse X-axis: 45 mm/min Rapid traverse Y-axis: 45 mm/min Rapid traverse Z-axis: 45 mm/min Feed rate X-axis: 10,000 mm/min Feed rate Y-axis: 10,000 mm/min Feed rate Z-axis: 10,000 mm/min Torque: 60 Nm DESCRIPTION TECHNICAL DETAILS Travel x: 1000 mm Travel y: 400 mm Travel z: 360 mm Control: Fanuc 18i-MB5 Projection: 350 mm Work ...

Saw blade Ø: 400 mm Cutting range at 90° round: 120 mm Cutting area at 90° rectangle: 200 x 80 mm Cutting area mitred at 45° rectangle: 150 x 70 mm Cutting speed: 13, 17, 26 m/min Drive motor: 380 V, 1.7/2.2/2.6 kW Space requirement: 1050 x 1000 x 1680 mm Weight: approx. 850 kg

Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller -Manufacturer: AEG, thyristor power controller -Type: Thyro-A 1A 400-60 80A -Quantity: 1x power controllers available -Price per piece -Dimension: 175/85/H170 mm -Weight: 2.2 kg

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate -Clamping plate: straightening plate with base frame -Length: 450mm -Width: 450mm -Table thickness: 29 mm -Total dimensions: 855/450/H1135 mm -Weight: 59 kg

BYSTRONIC LASER 4020 2001 Working range 2000 x 4000 Power : 4000 Watt Operating hours 60000 Voltage Stabilizer Automatic focal length adjustment Cut Control system (intercepts cut losses) Sideros vacuum cleaner with filters replaced 2023 Sheet metal loading arm PCs and CPUs updated in 2012 Resonator overhaul with new mirrors and ceramics, carried out in November 2020 Front and Rear Exhaust Drawer System

Solid-state relays, switchgear, switching components -Manufacturer: opto 22, solid state relay 6 pieces with heat sink -Type: 480D45-12 -Quantity: 2x assembly available -Price: per assembly -Dimensions: 300/200/H70 mm -Weight: 3.4 kg/pc.

Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 6x opto 22 480D45-12 / 1x electromatic RA4425-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

LISTING ID 22518 Brand: YANMAR Model: 6HYM-WET Condition: Brand New Specification - Model : 6HYM-WET - Number of cylinders: 6 in-line - Bore × stroke (mm) : 132.9 × 165 - Displacement (lit): 13.733 - Rated output (kW(hp)/rpm):M : 441(600)/2100 - Combustion system: Direct injection - Aspiration: Turbocharger + intercooler - Starting system: Electric starting motor (24V 6.0kW) - Cooling system: Heat exchanger - Size of flywheel housing and flywheel: SAE #1 and 14 in.

Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 5x opto 22 480D45-12 / 1x Gavazzi RA4450-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4650 N -Voltage: 230 V 8 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

engine diesel engine Cummins F3.8 - Stage 5 power approx. 114 kW / 154 HP shafts with 9/9 discs with 6 knives per disc (reconditioned) track system with track protection pads hopper with vibro chute Permanent-Over Belt Magnet remote control weight approx. 11 t

Interroll roller conveyor falling conveyor 1470-2155-490-420 RA1981 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: selectable between 1470 mm and 2155 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: no drive Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: Bitte wählen Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: NO For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look for ...

Fan, blower, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4656 N -Voltage: 230 V 19 W -Number: 1x fan included -Dimensions: 120/120/H35 mm -Weight: 0.5 kg

CNC control, control panel, logic unit, path control -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

Electric motor, three-phase motor -Manufacturer: Siemens, electric motor type 1 LA5166-4AA91 -Power: 15 kW -Speed: 1455 rpm -Shaft: Ø 42 x 110 mm -Design: B5 -Protection rating: IP 54 -Dimensions: 630/355/H400 mm -Weight: 97 kg

Interroll roller conveyor falling conveyor 720-490-420 RA1982 Brand: Interroll Roller width (RB): 420 mm Nominal/outer width (NB): 490 mm length: 720 mm Diameter rollers: 50 mm roller distance: 90 mm Roller conveyor drive: Interroll Drum motor Conveying speed: Freely adjustable with Interrroll controller Frame height: 115 mm Optionally available: Supports Side guide on one side and on both sides Not the right one for you? On our website you will find more articles or simply contact us. Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Conveying length in mm: 720 Nominal / outside width in mm: 490 Roll width in mm: 420 Roll division in mm: 90 Driven: YES For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement ...

Qty. 3 Second-hand winders Mfc.: Maxson Built: 1997 Roll width: max. 1,700 mm, min. 450 mm Maximum roll diameter: 1,650 mm The width of the core is: 70, 76, 120, 152, 300 mm

Gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, geared motor type HSG5DFR/44D8556A-4 -Speed: 24.5 rpm -Power: 0.09 kW 1350 rpm -Design: B5 -Shaft: Ø 10 x 20 mm -Protection rating: IP55 -Dimensions: 245/130/H145 mm -Weight: 4.2 kg

Muffler, exhaust system, tailpipe, silencer, exhaust muffler -Silencer: for Linde H60D -Type: G 4979 0694 unfortunately no more precise designation -Dimensions: see photos -Overall dimensions: 1560/370/H230 mm -Weight: 11.2 kg

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

Absolute encoder, encoder, encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, resolver, incremental encoder -Manufacturer: Heidenhain, incremental rotary encoder encoder in original packaging -Type: ROD 426 -Art.No.: 376846-L2 -Dimensions of box: 180/130/H90 mm -Weight: 0.4 kg

Key data: 4200 kN

Machine in production !1

DMG GILDEMEISTER CTX 410 CNC lathe built in 2006 is an extremely powerful machine designed for precision machining of workpieces with a maximum diameter of 320 mm. The machining process is performed inside a large, fully illuminated workspace using reliable components in the form of cutting tools and a high-speed spindle. The specially designed inclined bed effectively dampens all vibrations and oscillations, resulting in better quality of the machined surface and increased tool life. The offered DMG CTX 410 CNC turning center is also equipped with an integrated chip conveyor and a perfectly optimised, intuitive HEIDENHAIN CNC control. The total weight of the machine is approximately 6000 kg. Technical specifications of the DMG GILDEMEISTER CTX 410 turning center - CNC controller: HEIDENHAIN - turning diameter: 320 mm - turning length: 600 mm - feed in the X/Z axis: 250/635 mm -  ...

IMA LABELLING/TAMPER EVIDENT MACHINE, MODEL A 400 TE – NTF Year of construction: 2015 Ensures accurate and precise label application while reaching a high production speed when product protection from damage and tampering is needed. User-friendly, quick maintenance and easy to operate. PRODUCTION Maximum output: 400 cartons/minute Vignette label size (mm) Length: 15 – 60 Height: 10 – 60 Vignette reel diameter (mm) Up to 400 Tamper-evident label size (mm) Length: 15-35 Height: 15-35 Tamper-evident reel diameter (mm): Up to 400 Labelling accuracy (mm): ± 1 Carton dimensions A: 20 to 130 mm B: 12 to 100 mm C: 50 to 210 mm ELECTRICAL DETAILS Installed power (kW): 3.5 Standard voltage: 400 V – 50 Hz – 3PH + PE DIMENSIONS Size: 2345 x 2900 x 1265 mm (ca) Weight: 1,000 kg (ca)

Semi-automatic, double-sided vertical - mitre band saw Miter angle: 30°-90°-30° Material tension: hydraulic Saw bracket feed: hydraulic Lifting strap: back/hydraulic Speed: 15-100 m/min Strap dimensions: 4730 x 34 mm 45°: Round 330, Square 330, Rectangle 420x330 mm 30°: Round 240, Square 240, Rectangle 420x240 mm Angle +/- 30 (60) degrees, Saw feed hydraulic, Material tension hydraulic to the left and right of the saw blade, Stirrup guide on backlash-free and low-maintenance guide systems, Automatic adjustment of the stirrup feed stroke to the material diameter, Automatic angle positioning via Wago control with preset counter for any angle from -30 (60) to +30 (60) degrees, height adjustment of the upper belt guide hydraulic, minimum quantity spraying device (option)