129,248 used machines on RESALE, but how to find them? Machine Search
Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...
Radial Drilling Machine NOVISA NTR 1600 Spindle: CM5 Spindle exit Travel: 350 mm Spindle speed: from 25 to 1900 RPM Arm travel: 1600 mm Mini height in low position: 800 mm Max height in height position: 1500 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1200 x 3000 mm Weight: approx 4 T
used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...
Used spiral kneader DIOSNA, Type: SP 160 D -As good as new- - up to 160 kg dough / approx. 100 kg flour - Plastic cover available on request - Condition: Very good, ready for immediate use The kneader is in very good condition and is immediately ready for use. Viewing and test run are possible by arrangement.
Reducer Concentric AGRU/TRACEABILITY 250/160 SDR 1
Cloth Puller Oven Schiesser Pull-off Cup NEW 160/180cm Stove Depth -Aluminium cloth pull-off board furnace slider NEW -with undercoat -for 160 / 180cm depth -Pullers are 194cm long -with stainless steel trolley on 4 swivel castors -External dimensions of the carriage: 206x61cm and 182cm high
pressure: 160 t stroke: 400 mm table surface area: 1100 x 635 mm pressing speed: 6,57 mm/sec return speed: 11,62 mm/sec oil pressure max. in the work cylinder: 412 bar oil volume: 40 l dia. of piston: 145 mm column daylight: 1120 mm voltage: 400 V / 50 Hz dist. between pillars (front to rear): 350 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,7 x 0,9 x 2,1 m • unused workshop press, • manual and hydraulical operation, • horizontally moveable pressure cylinder, • working table hydraulical adjustable in height, • cylinder Ø 220 mm, piston base Ø 145 mm. • 2 support prisms • CE marking The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spiral housing Centrifugal pump Manufacturer: Allweiler Type: NT40-160 Diameter: 136mm 30m³/h H: 30m 3500 rpm Electric motor: Manufacturer: Siemens Type: 1LAZ1302AA90-Z 6.3kw NEW, from warehouse resolution for more information see pictures.
Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg
thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
thickness of jaw: 160 mm total power requirement: - weight of the machine ca.: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete stainless steal Capacity: 1600 liters Basket dimensions: 190x105x80cm Dimensions of the machine: 340x100x180cm Delivery time: 30 days after advanced payment
Qty. 1 Second-hand extrusion press Mfc.: FARREL Built: 1977 Type: hydraulic direct Force: 1600 Ton Billet dia.: 178 mm Billet length: 680 mm Container dia.: 185 mm Container length: 698 mm Operation pressure: 220 bar Fixed dummy block
turning diameter over bed: 330 mm turning diameter over slide rest: 190 mm centre distance: 650 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m turning length: mm 3-jaw chuck Multifix tool holder device tail stock coolant device Technische Daten / technical details: Spitzenweite / center to center 650 mm Dreh-Ø über Bett / turning diameter over bed 330 mm Dreh-Ø über Schlitten / turning diameter over sledge 190 mm Spindelbohrung / spindle hole 36 mm Drehzahlbereich / spindle speed 30-2500 UpM /rpm Antriebsleistung / drive capacity 2,2 kW Gewicht der Maschine ca. / weight ca. 600 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Machine Type: TIG Inverter Welding Machine Gas-cooled DC system Make EP-Systems Type TopTIG 160 HF Connection voltage 1 x 230 Volt Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Cooling burner gas-cooled Portable assembly system design Fuse 16 Ampere Dimensions L x W x H 410 x 240 x 320 mm Weight 10 kg Age 6 years Condition workshop-tested new, incl. UVV test report Scope of supply welding system with the following accessories: 1 piece TIG torch 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box complete Equipped 1 Piece Instruction Manual Warranty: 6 months from the date of delivery Original price ...
Spiral kneader Diosna SP 160 AD - extendable spiral kneader - for a maximum of 160kg of dough or.max 100kg of flour - with 2 timers - Automatic switching on and off via clocks - Stainless steel flour dust cover - 2 speeds (gears) - Boiler locking via pliers operated with hydraulics - suitable for almost all doughs - Vat capacity 260 liters
Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Key data: 500 , 77 , 30
Manufacturer: Krauss Maffei Type: 50 - 220 C Built: 2001 Control: MC4 Closing force: 500 kN Tie bar distance: 321 mm x 321 mm Plate size: 540 mm x 540 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 35 mm Lifting volume: 101 ccm / 92 gram HP Spray pressure: 1488 bar General Engine: 11 kW Heating: 9 kW Dimensions: 3.3 m x 1.3 m x 1.8 m Weight: 2500 kg Screen text: English / English Additional equipment Core pull x1 Air valve x1 Accu Hot runner control
Working to the end with the MWM 620/2020 engine.
Specifications Type: SDJ 1000/1600 Year of construction: 2014 Lifting capacity: 1000 kg lifting height: 1600 mm Mast height, lowered: 2080 mm Mast height, raised: 2080 mm Total weight: 214 kg Directly from the customer used from November from CH-Pratteln available.
Ground precision ball screw, D40x20, 1600mm, Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Attention: We have many, in stock, high quality ball screws in different versions in the diameters 32, 40, 50, 63 and 83mm. Please have a look at our website of IPV GmbH. Ball screw, Type 1586-4-7212, D40 x 20/25, 1600 mm, Fa. Rexroth, Ball screw diameter 40 mm, Pitch 20 mm, Length of thread 1415 mm Length of ball screw nut 87 mm, Max. total stroke 1328 mm, Total length of the spindle 1600 mm Diameter for coupling with motor 24 mm Diameter bearing seat A 30 mm, Diameter bearing seat B 28 mm Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give y ...
Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.
Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...
Throughput depends on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 40 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 150 Length: 150 Height: 180
properties: Used belt conveyors curve 90° Transnorm Condition: Fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. motor 0,55Kw and side guide Feet to be ordered separately Color: Silver/ Yellow 1 pc in stock specifications: Dimensions of the belt conveyor curve 90° Type: 1600-105 Total outer width: 1,820 mm Total width inside: 750mm Total width incl., motor: 870mm Curve angle: approx. 90° degrees Belt width: 500mm Strap Type: Gripp Frame height: 220mm Material: Aluminum / Steel Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, Schraegfoerderer or telescopes for loading and unloading your goods, we ar ...
Diosna spiral kneader SPV 160 AD with 2 extendable boilers For a maximum of 160 kg of dough per bowl Kneading tool made of stainless steel Including two stainless steel shells Timer with two clocks Two speeds Friction wheel drive Condition: obsolete; checked and cleaned
Key data: 128 KW, 160 kVA, 400 V
MODEL: EQ-VP160128 GENERATOR ENGINE: Volvo Penta TAD731GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 160(kVA) / 128(kW) CYLINDERS: 6 STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 1500kg DIMENSIONS L/W/HEIGHT (MM): 250010201450 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight pr ...
PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW
DALEX 50Hz AC welding transformer 160kVA Rated Power: 160kVA/50%ED Voltage Prim.: 400V50Hz Voltage sec.: 6.25 to 9.75V in 4 steps Weight: 223kg
Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...
SICK WE 160 -F440 transmitter / receiver photoelectric sensor Condition: used
--> tilting kneader, with double jacket; Material : wetted areas in stainless steel Volume : 210 ltr. Usable volume: 160 ltr. Dimensions : L 2.40 m x W 1.15 m x H 1.35 m;
Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes ...
Key data: 160 KW, 200 kVA, 400 V
MODEL: EQ-D200160 ENGINE: Deutz BF6M1013FC G3 FREQUENCY (HZ): 50 VOLTAGE (V): 400 MAXIMUM POWER: 200(kVA) / 160(kW) STARTING: ELECTRIC CONTROL SYSTEM: SELF-CONTROL FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 2600kg DIMENSIONS L/W/HEIGHT (MM): 290012001600 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) / ComAp Alternator: Leroy-Somer / Stamford Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry ...
Stretch cart: 1600 mm and width: 200 mm, Bausano brand.
Multi-compartment clamping prism for clamping to process mould pins.
CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...
Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000
Hammer mill Working width: 1600 mm Rotor diameter: 1000 mm Drive: 75 kW Application: Shredding of all impact-brittle materials such as - impact-resistant plastics - E-waste -Wood waste - mineral insulation waste (e.g. glass wool, rock wool,...)
used spiral kneader Eberhardt Maximat MAAN 160 extendable, completely overhauled, 160 kg dough, 2 watches, with 2 stainless steel boilers, stainless steel spiral, many new parts, new friction wheel, new lifting cylinder, electrics renewed, 380/400 V, 3 phases, 50 Hz, 19.5 A, spiral 7.8 kW, boiler 0.75 kW
WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...
Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump
pressure: 160 t distance between columns: 850 mm stroke: 150 mm table surface area: 850x650 mm total power requirement: kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2,5 x 2,5 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
FEINTOOL GKP F 160 hydraulic press was built in Switzerland. The automatic fine blanking press combines several workpiece machining stages into one precise process and significantly saves time and effort. As a result of fine blanking, parts with a maximum thickness of 6 mm obtain a characteristic even surface and accurately defined edges that cannot be achieved with other machines. The FEINTOOL GKP-F hydraulic punching press features a robust, stable construction and a total force of 160 tonnes. Offered with the machine a sheet metal feeder with a maximum thickness of 6 mm and a width of 210 mm allows for completely automatic machining. The automatic punching press underwent extensive modernisation in 1999. The total weight of the GKP-F 160 press is 9000 kg. Technical data of the FEINTOOL GKP F 160 fine blanking press - maximum sheet metal thickness: 6 mm - maximum sheet metal wi ...
Product number: 2676 Type: ATG700/1600 Serial number: 11204214 Year of construction: 2003 Belt width: 700 mm Length: 1450 mm, extendable to 1800 mm Power: 3 x 400V, 50Hz, 0.18kW Dimensions: 1450 x 1000 x 1200 mm Weight: 175 kg
Snowblower Westa Demonstration unit Hydraulic drive 3 point mount - hydraulically swivelling Pipe Hydraulic Adjustment Weight 615 kg Bolt bottom 28 mm Bolt top 25 mm
maximum number of results exceeded
please refine your search
