used EMCO emcomat

This EMCO EMCOMAT FB-450 Universal Machining center was manufactured in the year 2012 in Austria and has 1262 production hours. It is equipped with a EMCO CYCLE control unit and has 3 axis. The machine has a spindle speed of 20-5000 rpm.

Emco Emcomat 17S Year of construction: 1999 Center height 140/280 mm Weight 725 kg Dimensions: 1650x 1060 x 1290 Speed 15- 3550 rpm

Key data: 400 mm, 1000 mm, 250 mm

1 L + Z lathes with digital display ( machine is from training workshop ) Fabrilat: EMCO Model: Emcomat 20D Year of construction: 2011 Turning diameter over bed: 400 mm Turning diameter via transverse support : 250 mm Turning length: 1000 mm Speed range up to: 3000 rpm. Spindle bore: 50 mm Equipment / Accessories: Digital

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum no ...

EMCO - Loading arm 4 inches - used - as spare part carrier

Key data: 800 Heidenhain, 400 TNC 124, 600

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm CNC Brand: Heidenhain CNC Model: TNC 124 X-Axis:         600mm Y-Axis:         400mm Z-Axis:         400mm Table Length:   800mm Table Width:    400mm Table load:     300Kg Spindle speeds: 4000Rpm Feed rate X-Axis:2.000mm/min. Feed rate Y-Axis:2.000mm/min. Feed rate Z-Axis:2.000mm/min. Stroke pinole:  100mm Length:         2.200 mm  Width:          2.200 mm  Height:         2.200 mm  Weight:         2.200 kg 

Traypacker power food Capacity: 14,400 cups/h à 125 g / cups, used in very good condition Technical data: production capacity: 40 cartons / min 6 Cup/tray = 240 cups per minute = 14,400 Cup 125 g / Cup year: 2008 Dimensions: Ready-cut pieces Lxwxh: 698,5 x 168,0 x 1.5 mm Cover LxDxH: 95.5 x 95.5 x 9.0 mm Cup DxH: 92.5 x 42.0 mm machine dimensions: Lxwxh: 7500 x 7400 x 3000 mm Weight: approx. 6,800 kg Original price: 950,000

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm MACH-id    4416 MAKE        EMCO Austria TYPE          FB-5 YEAR         2002 SPECIFICATIONS X Axis mm       600 Z Axis              400 Y Axis mm     400 Table size        800 x 400 Table load Kg     400 Spindle taper      Sk 40 Spindle rpm        3150 DIMENSIONS Length        2200 mm Width         2200 mm Height         2000 mm

North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.

Spindle: ISO 30 Travel (X/Y/Z): 300 / 200 / 350 mm Speeds: (8) 80 - 2200 rpm Spindle stroke: 45 mm Feed: 20 - 200 mm/min Table size: 600 x 200 Extension: 110 mm Head swivel: +/- 90° Engine power: 1.1 / 1.4 kW Connection: 380 V / 16 A Dimensions, approx.: 1280 x 1120 x 1750 mm Weight approx.: 450 kg Facilities: - Swivel milling head +/- 90° - 3-axis digital display - Coolant foot with pump - Emergency-off-stroke button - Machine light - Milling machine vice RB 133 with turntable, Röhm - 4 tool holders

Key data: 200

Center height: 200 mm Center distance: 1000 mm Spindle bore: 0 mm Swing over bed Ø:        400mm Swing over cross slide Ø:250mm Spindle bore:            50mm Spindle power:           5kW Tailstock spindle Ø:     50Ø Stroke pinole:           120mm Spindle taper:           3Mk Speeds / ranges:         3000Rpm Length:                  1.900 mm  Width:                   1.000 mm  Height:                  1.300 mm  Weight:                  840 kg 

CNC Lathe Manufacturer: EMCO Type: EMCOTURN 345-II Year of construction: 2003 Production number: R2A R40 01 Center height: 1160 mm Center width: 700 mm turning length: 510 mm orbit diameter over bed: 430 mm rotation diameter via paddling slide: 210 mm workpiece weight: 30 kg Working spindle: Spindle head according to DIN5026 Size: A5 Spindle diameter in front bearing: 80 mm Spindle bore: 53 mm chuck diameter: 160 mm Rod passage diameter: 45 mm torque: 78 Nm Support: Tool system DIN69880 Chisel cross-section: 12 x VDI30 Number of bed sleds: 1 Number of paddling sledges: 1 Plan stroke: 100 mm Longitudinal stroke: 310 mm Tailstock: Quill cone: MK4 Quill diameter: 60 mm Main spindle: 1500 rpm Plan axis (X): 3000 rpm Longitudinal axis (Z): 3000 rpm Feed speed: Longitudinal slide min./max.: 0/24000 mm/min Paddling sledge min./max.: 0/20000 mm/mi ...

Center height: 170 mm Center distance: 700 mm Spindle bore: 120 mm MACH-id    5209 MAKE     EMCO Austria TYPE       EMCOmat EM17 D YOP         1998 SPECIFICATIONS Swing over bed Ø     340 mm Swing over cross slide         190 mm DBC Turning length       700 mm Spindle bore       50 mm Bed width          260 mm Quill Ø       50 mm Stroke pinole        120 mm Spindle taper       3 Mk Workpiece weight        150 Kg Power       5,3 kW Speeds / ranges      3000 Rpm Feed rate X-Axis      0.787 mm/min. DIMENSIONS Length       1600 mm  ...

Emco Turn 425 MC CNC Lathe 2 bar feeder 2 turret 4 spindle Machine is in good working condition

Longitudinal X: 450 mm Cross Y: 300 mm Vertical Z: 350 mm Spindle taper: 40   Positions ATC: 0   SPECIFICATIONS X - Travel   450 mm Y - Travel  300 mm Z - Travel  350 mm Controll  3 axis Dro Table Length x Width  800 x 400 mm Table load in kG  400 Kg Spindle Taper  Sk   40 kW power on spindle  3,2 kW Spindle speeds / ranges  50 - 2500 Rpm  

Longitudinal X: 450 mm Cross Y: 300 mm Vertical Z: 350 mm Spindle taper: 40   Positions ATC: 0   SPECIFICATIONS X - Travel   450 mm Y - Travel  300 mm Z - Travel  350 mm Controll  3 axis Dro Table Length x Width  800 x 400 mm Table load in kG  400 Kg Spindle Taper  Sk   40 kW power on spindle  3,2 kW Spindle speeds / ranges  50 - 2500 Rpm  

This EMCO LABOR E260 Lathe was built in the year 2001 in Italy. It is equipped with a CNC FAGOR control unit. The machine has a bar passage of 78 mm.

This Emco Hyperturn 45 Lathe was manufactured in the year 2016 in Austria and has 27054 production hours. It is equipped with a SIEMENS control unit.

Center height: 0 mm Center distance: 1000 mm Spindle bore: 36 mm SPECIFICATIONS Swing over bed Ø  330 mm Control  Conventionel Swing over cross slide  210 mm Distance between centres  1000 mm Spindle bore  36 / 25 mm Spindle speeds / ranges  30 - 2500 Rpm Power  2.2 Kw DIMENSIONS Length  1800 mm Width  850 mm Height1400 mm - incl. collet device + inserts 29 pieces 2 - 30 mm- incl. 3 chuck 150 mm ?- incl. 4 chuck 150 mm ?- incl. change gears  

This Emco Concept TURN 450 Vertical Machining center was manufactured in the year 2013 and has 26337 production hours. It is equipped with an EMCO SIEMENS SINUMERIK OPERATE control unit. The machine has a spindle speed of 6300 rpm.

This EMCO E900 Vertical Machine Center was manufactured in the year 2015 and has 39500 production hours. It is equipped with a HEIDENHAIN control unit. The machine has a spindle speed of 10000 rpm.

Key data: 600 mm, 200 mm

Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Also larger MAHO or lids, ... Clamping plates : A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm Make EMCO F B 5 Type FB 5 Year 1998 Universal milling machine active digital Table length (mm) L = 800 Table width (mm)W = 400 Longitudinal X (mm)X = 600 Cross Y (mm) Y = 400 Vertical Z (mm) Z = 400 Sk40/3150/7.5Swivable head 90 Gr.Feeds all directions  

X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP.

X-travel: 210mm, z-travel: 610mm, swing over bed/ slide: 540/ 360mm, max. turning diameter: 310mm, length: 1730mm, width: 2860mm, height: 1880mm, weight: 4.3t, with Automation FMB unirobot MH5L-XP.