Technical data and equipment: Travel X/Z - X2/Z2: 270/750 // 205/750 mm Travel Y: 100 (+-50) mm Max. rod diameter: 65 mm Main spindle drive: 0 - 5000 rpm Sub-spindle drive: 0 - 7000 rpm Tool holder: VDI 30 Control: Siemens Sinumerik 840 PL Revolver: 2 pcs. for applied Tools (12 slots each) Turret: Upper turret is equipped with Y-axis Spindle: 2 pcs main and counter spindle with C-axis Accessories for the machine: - Bar feeder Irco Profimat 70.6/270.6 - Internal cooling - Driven tools (straight and angled) - Chuck for main and counter spindle -Suction -Conveyor - Pick-up device with outfeed conveyor - KSS system Knoll SF 1000/Turbo-1 - Various holders approx. 80 pcs VDI 30 - Drill rod holder - Muzzle holder Machine space requirements: 3400 x 2600 x 2300 mm // 7600 kg
Workspace: - Travel in X/Y/Z: 220 / - / 710 mm - Center width: 700 mm - Tip height: 170 mm Main spindle: - Max. speed: 3000 rpm - Spindle connection: size 5 (DIN 55029) - Max. drive power: 5.3 kW Tailstock: - Inner cone: MK3 - Quill stroke: 120 mm - Inner cone of the quill: 50 mm
This 3-axis EMCO EmcoMill E900 was manufactured in 2018. The vertical machining center is equipped with a Siemens 828D control system and offers a spindle speed of up to 12,000 rpm and a torque of 83 Nm. It has a travel of X 900mm, Y 500mm, Z 500mm and a rapid traverse speed of 24m/min. The machine has a 360l coolant pan and a 20-cavity tool magazine. If you are looking for a high-quality milling machine, you should consider the EMCO EmcoMill E900 machine that we have for sale. Contact us for more information. Brand: SIEMENS Model: 828 D Spindle Speed Range: 50-12000 Number of axes: 3 X-axis travel: 900 mm X-axis rapid traverse: 24 m/min Y-axis travel: 500 mm Rapid traverse Y-axis: 24 m/min Z-axis travel: 500 mm Rapid traverse Z-axis: 24 m/min Outer length: 1000 mm Outer width: 520 mm Minimum distance between vertical spindle and table: 100 mm Maximum distance between ver ...
Machine Type: NC Cycle Lathe Manufacturer: Emco Type: Emcomat EM300x2000 Year of Make: 2015 Condition: used / very good, few operating hours Serviced exclusively by Hedelius Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-EMC-0824 DESCRIPTION We offer you a used NC cycle lathe from the manufacturer Emco. Control Fagor Spindle speed max. 2500 Multifix Base Holder Tip width 2000 Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved
Stock number: 3922 PROCESSING Manufacturer: EMCO, Type: MILL E-600 Machines NO.: M-06204707, Year of manufacture: 2007 Specifications: Table size 700 x 500 mm Large table load 500 kg Longitudinal movement (X) 600 mm Transverse movement (Y) 500 mm Vertical movement (Z) 500 mm Size distance spindle/table 700 mm Spindle cone 40 iso Stepless spindle speeds 10000 rpm Total power 16 KVA Tool changer 20 places Control Fanuc Oi-MC Fabr. Controlled in axes 3 Operating hours spindle 3167 hours Accessories: Cooling by spindle Chip conveyance. Cooling water system. Length: 2040 mm, Height: 3000 mm, Width: 2500 mm, Weight: 3800 kg
Dear Ladies and Gentlemen, the machine is to be returned immediately.the machine ran in a single shift, the Siemens modules are new
WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/mi ...
Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...
Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...
EMCO - Loading arm 4 inches - used - as spare part carrier
EMCO Turn E65Year of manuf. : 2016 Control : Siemens 828D - ShopTurn Turning diam. : 500 mmTurning length : 520 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:5.000 rpmPower (max.):22 kWTorque (max.):305 NmBarcapacity:65 mmWorkpiececlamping:3-Jaw chuck, SMW Autoblok 210 BBToolcarrier (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI 30Tooldrive:5.000 rpm, 5 kW, 20 NmMovement in X/Y/Z:260/80/610 mmRapid travers in X/Y/Z:30/15/30 m/minTailstock:Technology:Hydraulic drivenTailstockforce (max.):8.000 NStroke:500 mmCone:MK4Equipment/Accessory:Chipmanagement:ChiptrayCoolingmanagement :Internal coolant pump with High-pressure, 14 barRawmaterialfeed:Interface Barloader preparedFinishedpartremoval:Partscatcher with conveyor beltToolholder:Misc. used static and driven toolsFurther Equipment:Rinsing pistol
EMCO Hyperturn 65Year of manuf. : 2017 Control : Siemens 840Dsl Turning diam. : 500 mmTurning length : 800 mm____________Description:Mainspindle:Technology:MotorspindleSpeed:4.0 00 rpmPower (max.):29 kWTorque (max.):250 NmBarcapacity:76 mmSubspindle:Technology:MotorspindleSpeed:5.000 rpmPower (max.):29 kWTorque (max.):250 NmEjector:PneumaticMovement in Z:800 mmToolcarrier I (X/Y/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Y/Z:260/100/800 mmEilgang in X/Y/Z:30/12/30 m/minToolcarrier II (X/Z):Technology:Turret with 12 stationsTaper:VDI30Tooldrive:5.000 rpm, 6,7 kW, 25 NmMovement in X/Z:210/800 mmEilgang in X/Z:30 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Internal cooling unit with paperbeltfilter and High-pressure, 40 barRawmaterialfeed I:Robotinterface preparedRawmaterialfeed II:Barloaderinterface prepa ...
turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm spindle turning speed range:40 - 3000 U/min total power requirement:6 kW weight of the machine ca.:1,2 t dimensions of the machine ca.:2 x 1 x 1,6 m
turning diameter over bed:340 mm turning diameter over slide rest:190 mm turning length:700 mm spindle bore:50 mm shaving-spindle speed range:40 - 3.000 U/min dimensions of the machine ca.:2 x 1 x 1,6 m total power requirement:6 kW weight of the machine ca.:1,2 t
turning diameter:220 mm turning length:310 mm total power requirement:17 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:2,25 x 1,63 x 1940 m greates pass round over bed:430 mm bore diameter:45 mm centre distance:687 mm slide travel radial ( X-axis ):160 mm slide travel axial ( Z-axis ):310 mm spindle turning speed range:0-6.300 U/min
turning diameter:220 mm turning length:700 / 665 mm total power requirement:17 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,63 x 1,98 x 1,94 m greates pass round over bed:430 mm Part length max.:510 slide travel radial ( X-axis ):160 mm bore diameter:45 mm
turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m
turning diameter:360 mm turning length:520 mm total power requirement:20 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3 x 2 x 2 m
bar material dia.:65 mm turning length:644 mm turning dia. over bed:600 mm turning diameter over slide:430 mm y-axis:100 (+-50) mm turning speeds:2x 5.000 1/min positive location each:2x C-Achse, 0,001° Grad Sub spindle:ja/yes turret (x-stations):2x 12 VDI 30 Pos. driven tools:2x 12 Pos. turning speeds:2x 4.000 1/min control:FANUC 18 iTB total power requirement:30 kVA weight of the machine ca.:8 t dimensions of the machine ca.:3,5 x 2,5 x 2,3 m turning- milling center with Y-axis, collet device on main and subspindle, high pressure pumps 2x 14bar, parts catcher/conveyor, barloader ENTL 10-65, chip conveyor, lot of accessories approx. 54.500 hours "machine on", 30.500 h "automatic", 14.000 h "feeding"
A CNC universal tool milling machine Emco is available. Travel X/Y/Z: 450mm/300mm/350mm, table dimensions X/Y: 800mm/400mm, speed: 2500rpm, tool holder: SK40, quill stroke: 100mm, milling head swivel: +/-90°, feed: 400mm/min, rapid traverse: 4m/min, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1700mm, weight: approx. 1500kg. An on-site inspection is possible.
x-travel: 380 mm z-travel: 140 mm dist. cutter spindle - workpiece spindle: 370 mm distance spindle - column: 163 mm table-size: 630 x 150 mm quill stroke: 40 mm milling head -swivable: 360 Grad spindle turning speed range: 120-2000 U/min table feed: 35/65/170 mm/min voltage: 380 V weight of the machine ca.: 130 kg total power requirement: 0,5 kW dimensions of the machine ca.: 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Milling machine, universal milling machine, tool milling machine, drilling and milling machine -Manufacturer: EMCO, milling machine with digital display and hydraulic clamping -Clamping table: 800 x 400 mm -Clamping table: rotatable/tiltable/swivelable -Travel range X/Y/Z: 600/400/400 mm -Spindle mount: SK40 with hydraulic clamping Accessories: incl. 9 tool holders (see photos) -Speeds: from 63 - 3150 rpm -Feed rate X/Y: 16-800 mm/min -Feed Z: 8-400 mm/min -Quick stroke: 100 mm -Rapid traverse X/Y: 2000 mm/min -Rapid traverse Z: 1000 mm/min -Coolant system: yes -Dimensions: 1740/1670/H1940 mm -Weight: 2200 kg
Manufacturer: EMCO Model: MC 120-60 Year of Manufacture: 2008 Type of Machine : Machining Center Spindle hours: 10,459 CNC Control: Fanuc 18i-MB Tool holder: SK40 Condition: Used, fully functional Axis Travel - X axis: 1,200 mm - Y axis: 600 mm - Z axis: 500 mm - 4th axis: Yes, installed - 5th axis: No Equipment and Features - Tool magazine: 30 positions - Band filter: Yes - Chip conveyor: Yes - SK40 toolholder package included - Fully operational Lang Eco Compact 10 automation system with 10 vices included - Custom-built slatted loading rack for ergonomic loading and unloading of machine and - automation Find more here - / Contact us at -
Manufacturer: EMCO Maxxmill 350 Model: Maxxmill 350 Year of Manufacture: 2017 Type of Machine : Milling Center Spindle hours: 11,000 CNC Control: Heidenhain iTNC620 HSCI Spindle: ISO30, 12,000 rpm, 33 Nm, 7 kW 4th axis: Yes 5th axis: Yes Automation system: Lang Eco Compact 10 - fully operational and pre-configured Condition: Used, fully functional Axis Travel - X axis: 350 mm - Y axis: 250 mm - Z axis: 300 mm Equipment and Features - Tool magazine: 50 positions - Chip conveyor: Yes - Band filter: No - Pallets: No - Comprehensive ISO30 toolholder package included - Lang Eco Compact 10 automation system - fully operational and pre-configured, included - Custom-built workspace cover - special manufacture, included Find more here - / Contact us at -
- Universal milling machine with toolmaker precision - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake -
- Universal milling machine with toolmaker precision - Small-batch production to complex workpieces - Vertical milling head with hydraulic tool clamping Y and Z Milling - Handwheel in all three axes - Linear guideways in all three axes - Workspace guard retractable with large chip shield - Main motor with spindle brake -
Horizontal turning machine manufactured in 2014. These EMCO TURN E25 features a maximum turning diameter of 85 mm and a turning length of 225 mm. Includes a VDI 16 disk turret with 12 tool stations and a maximum chuck size of 100 mm. If you are looking to get high-quality turning capabilities, consider the EMCO TURN E25 machines we have for sale. Contact us for further details. 2 units available.
.jpg)
.jpg)
.jpg)
