Model
(Manufacturer: DECKEL MAHO)
Lid Maho DMC 64 V linear Year of construction 2003 The MMC was overhauled in October, as well as the rectifier. The spindle motor has been overhauled - The encoder is new as well as the glass scale in X. Location: Bochum
Key data: 630 mm, 560 mm, 560 mm
Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m
Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.
Control type: CNC Sinumerik 840D-SL x-way 1135 mm y-way 1050 mm z-way 750 mm table size 1400 x 1050 mm Table load 2500 kg max. workpiece size LxWxH 1400 x 1240 x 750 mm Speed 10000 rpm feed speeds X/Y/Z Axis 40000 mm/min Expressspeeds x/y/z 40000 mm/min Tool holder HSK-A100 HSK Number of places in the tool magazine 30 places max. tool weight 20 kg max. tool length 395 mm max. tool diameter 110 mm Machine height 3294 mm Drive power - spindle motor 44 kW machine weight approx. 17.9 t Space requirements approx. 15 m2 Information: Universal milling machine in mono BLOCK design (3-axis) - available September 2019 - only 3800 spindle hours, 13400 power-on hours Equipment / Accessories: - Coolant system - High-pressure pump - Chip conveyor - Hand-held panel - BALLUFF option - Documentation
This 3-axis DECKEL MAHO DMU 60 E was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine is equipped with a 25-fold tool changer and a manually swivelable milling head, providing versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 60 E vertical machining centre we have for sale. Contact us for further details.
x-travel:635 mm y-travel:510 mm z-travel:460 mm turning speed range:20 - 10.000 U/min tool taper:SK 40 table clamping surface LxW:790 x 560 mm Machine with glass scales Full safety cabin with sliding doors + interior lighting Height-adjustable machine shoes 3 pcs.
x-travel:630 mm y-travel:560 mm z-travel:560 mm total power requirement:10 /15 kW weight of the machine ca.:6500 kg dimensions of the machine ca.: 4,4 x 5,4 x 2,9 m Table dimensions:1000 x 610 mm Loading:400 kg rapid traverse::X 26, Y 26, Z 20 m/min speeds::20 - 12.000 min -1 tool taper:SK 40 Number of tools:20 ( 2 x 10 ) St. control:CNC MillPlus/TNC430 Documents:vorhanden
x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis
x-travel:700 mm y-travel:550 mm z-travel:500 mm tool taper:SK40 spindle speed max.:12.000 U/min Tool changer:30 fach electronic handwheel chip conveyor
This 5-axis DECKEL MAHO DMC 60 Hi Dyn was manufactured in 2002. It features a HEIDENHAIN MILLPLUS CNC, pallet dimensions of 630 x 500 mm, and a magazine capacity of 60 tools. The spindle taper is SK 40, and it includes internal coolant through the spindle at 40 bars. Consider the opportunity to buy this DECKEL MAHO DMC 60 Hi Dyn vertical machining centre. Contact us for more information.
x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: SIEMENS 840 D control: Powerline Shop Mill table surface area: ø 630 x 500 mm table swivelling +/-: 110/5 Grad spindle taper: SK 40 spindle turning speed - stepless: 20 - 10.000 U/min spindle drive: 13 kW max. torque on the spindle: 82 Nm feed speeds: max. 20.000 mm/min rapid traverse: 24 m/min no. of tools in magazin: 30 wotkpiece diameter with 2 vacant positions: max. 130 mm tool length - max.: 290 mm weight of tools max.: 6 kg total power requirement: 17 kVA weight of the machine ca.: 4,05 t dimensions of machine L x W x H: 2,21 x 2,12 x 2,15 m = 5-axis machining center (5 axis simultaneously) with 2-axis NC swivelling rotary table - only 9.609 spindle hours - - the machine was used for sample and prototype production, 3D machine model for kinematic simulation in a CAM programming system (available in IGES and STEP format ...
CONTROLS CNC controls GRUNDIG DIALOG 12 WORKING RANGE -CUBIC- X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 500 mm SPINDLE / HEAD spindle revolutions (max): 5000 /min tool fixture: ISO SK 40 DIMENSIONS / WEIGHTS total weight approx.: 4500 kg The machine needs a new control card (price €2,000).
Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, C-axis rotation range: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, power-on hours: 56612h, spindle operating hours: 21206h. The machine is located in the United Kingdom. Inspection possible by appointment.
x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...
x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm control: 810 D 3D ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 8.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 DIN 69871 work table:: table surface area: 1.200 x 560 mm max. table load: 1.000 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change time: 1,6 sec change-time chip to chip: 7,0 sec feeds:: rapid traverse: 25 m/min total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Chip conveyor: Automatic Tool Changer: Coolantsystem: Spray gun: elektr. hand wheel: Signal-Light: CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours ...
Incl. 60-fold tool changer, NC rotary table with swivel axis, incl. three-jaw chuck, jaw width: 250 mm, incl. tool holders located in the tool changer, incl. chip conveyor and coolant unit Attention: The machine can be transported on a standard truck! Additional technical specifications: • Measuring system resolution X/Y/Z: 0.001 mm • Position tolerance in X/Y/Z: 0.010 mm • Max. tool length from spindle nose: 280 mm • Max. tool weight for automatic tool change: 6 kg • T-slot spacing: 63 mm 14 H 7 • Center bore: 30 mm • Swiveling speed: 26 rpm • Input and display unit: 0.001° Note: No guarantee can be given regarding the current runout or machining accuracy of the machine. We have received information indicating a possible deviation in the area of the tool holder or clamping system. An appropriate inspection is recommended.
This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2005. It features a HEIDENHAIN iTNC 530 control unit and a 20-position tool changer, providing efficient machining capabilities. With a machine hour count of 39,396 hours, this vertical machining centre represents an opportunity for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details.
incl. NC rotary table, with 9 slots, incl. the tool holders located in the tool changer as well as chip conveyor and coolant unit Attention: the machine can be transported on a standard truck. Attention: the vices visible in the photos are not included in the scope of delivery! Additional technical specifications: • nominal current: 80 A
Incl. 60-fold tool changer, NC rotary table, incl. tool holders located in the tool changer, incl. chip conveyor and coolant system. Attention: without the machine vise shown in the photos! Additional technical specifications: • nominal current: 100 A • Path measuring system resolution: 0,001 mm • Input resolution in X/Y/Z: 0.001 mm • Position tolerance in X/Y/Z: 0.010 mm • max. tool diameter with free adjacent places: 160 mm • tool length from spindle nose without tool breakage monitoring: 350 mm • with tool breakage monitoring: 315 mm • max. tool weight at automatic tool change: 10 kg • max. total tool weight in magazine: 200 kg • Distance of T-slots: 63 mm • Number of T-slots: 9/14 pcs • Center bore: 50 mm • max. rotation of the table top: 20 rpm • Feed: 3600°/min • Resolution of the measuring system: 0.001°
Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system. Attention: The machine can be transported on a standard truck! Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm
Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!
Attention: The machine can be transported on a truck up to 3000 mm wide! Additional technical specifications: • table with 5 slots • with mounted plate, plate dimensions: 900 x 550 mm • incl. vise, jaw width: 125 mm
Attention: the machine can be transported on a truck up to 3000 mm wide! Incl. the tool holders located in the tool changer. Additional technical specifications: • Setup mode X/Y/Z: 20 - 2000 mm/min • Position measuring system X/Y/Z: 0.001 mm • with in total 32-tool changer (2 x 16 places) • Max. tool diameter with fully places magazine 1: 130 mm • Max. tool diameter with fully places magazine 2: 80 mm • max. tool weight at automatic tool changing: 8 kg • Max. total tool weight in magazine: 160 kg • NC rotary table built into the rigid table. • Number of T-slots: 14/H 12 mm • Aligning slot/one: 14/H 7 mm • T-slot spacing: 63 mm • Permissible load of work tables: Rotary table: 500 kg
Incl. NC rotary table, also a simple pallet changer system, incl. the SK 40 tool holders located in the changer as well as chip conveyor and coolant unit. Attention: the machine can be transported on a standard truck! Additional technical specifications: • nominal current: 80 A • Distance between clamping holes: 100 mm • Number of clamping holes: 33 mm • Center bore: 50 mm • Max. rotation of the table top: 13.6 rpm • Feed: 3600°/min
Attention: the machine can be transported on a truck up to 3000 mm width! Additional technical specifications: • Feed rate in X/Y/Z: 20 - 15,000 mm/min • Setup mode X/Y/Z: 20 - 2000 mm/min • with in total 32-station tool changer (2 x 16 places) • max. tool diameter when all slots in magazine 1 are occupied: 130 mm • max. tool diameter when all slots in magazine 2 are occupied: 80 mm • max. tool length from spindle nose: 315 mm • max. tool weight at automatic tool changing: 8 kg • max. total tool weight in magazine: 160 kg • T-slot spacing: 63 mm
This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details.
Deckel-Maho DMU50 X: 500 - Y: 400 - Z: 400 mm CNC Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Power on spindle: 13 kW Admission in boring head (ISO): BT 40 Spindlespeeds: 20 > 9000 rpm Table size: 700 x 500 mm Control: Heidenhain TNC 426 Length: 2700 mm Depth : 2700 mm Height: 2500 mm Weight: 3,5 ton Toolholder: yes Number of tools: 16 positions
2005Siemens 840D Powerline ShopMillØ630 x 500 mm200 kg115° (-5°/+110°)500 mm450 mm400 mm20-10,000 rpm9 kW13 kW82 Nm0.010 mm0.01 mm24 m/min20 m/minChain magazine with double gripper, 30 positions SK40 (DIN 69871)80-130 mm (speed dependent)290 mm6 kg80 l17 kW4,860 x 4,350 x 2,424 mm2,210 x 2,120 x 2,150 mm4.05 t35,880 h9,609 h400 V / 50 HzDirect linear encoders (X/Y/Z)Heidenhain TS641 (infrared)
10.500 € 
