used ZENO ztll

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 1600 Year of construction: 2018 Operating hours: approx. 400 Specifications: Drive power: 2 x 55 kW Sieve: 35 mm hexagonal Screen design: solid screen basket, reinforced with ribs, including sieve quick-change device Counter knife: with cutting gap adjustment Hopper: 1,075 mm high, without lid with maintenance door and level sensor (Sonar Bero) Transmission: Compact gearbox with torque cut-off Filling opening: 1,600 x 1,600 mm Rotor speed: approx. 80 - 120 rpm Rotor aircraft: 600 mm Rotor design: 4 rows (76 pieces) positive inserts 60 x 60 mm on tool holders Rotor bearing: Standing bearing Machine floor and slide bottom: grooved Weight: approx. 13,400 kg Universally applicable shredder for a wide variety of materials The ZTLL shredder is the result of more than 35 years of kn ...

For sale is a used ZENO shredder ZTLL 740x900 with the following features: Manufacturer: ZENO Model: ZTLL 740x900 Condition: good Dimensions set-up: 1.70 x 1.80 x 2.60 m last operation: August 2023 Previous use: EPS shredding Electrical data: Control cabinet is wired to the machine Motor power: 15kW Hydraulic ag: 0.25 kW Other: Spare perforated grille 11x17 available, separate stairs to the hopper available; Availability: immediately or by appointment

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1600 x 2300 Year of construction: 2010 Specifications: Main drive power: 1 x 75 kW, 134 A rpm: 1500 Hydraulic drive power: 5.5/0.75 kW, 11/1.9 A rpm: 1.500 60s Cutting Crowns Weight: approx. 14,000 kg

used shredder / shredder Manufacturer: ZENO Type: ZTLL 1400 x 1600 Year of construction: 2010 Specifications: Main drive power: 1 x 45 kW, 81 A rpm: 1500 Hydraulic drive power: 2.2 kW, 5.0 A rpm: 1.420 Rotor flight circle: approx. 380 mm 40 mm cutting crowns 52 Tools/Cutting Crowns Weight: approx. 5,400 kg Hint: The gearbox housing had a hairline crack, which was glued. (see pictures) It may have to be replaced.

CATALOG NO. 7091 TECHNICAL DATA - dimension of the loading hopper length/width 1000x800mm - rotor width 800mm - 15kW motor - sieve - knife dimensions 40x60mm - number of knives 20 pcs - autoreverse - pressure drawer - outlet for chipped wood, diameter 260mm - dimensions length/width/height 2040x1700x1530mm - weight 1680kg ADVANTAGES – German production – unpainted - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 39900 PLN Net price: 8867 EUR depending on the price 4.50 EUR Net price: 10500 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulders, Planer, ŻEFAM ,DZSB-40, Planer in poland, Planers and Moulders in Poland, Woodworking ...

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

Intake opening: 1.400 x 2.200 mm Motor power: 37 kW, industrial gearbox Rotor flight circle: 450 mm Rotor speed: approx. 110 rpm Cutting system: 24 pcs. single teeth Rotor bearing: Flange bearing Hopper standard Machine weight: approx. 6.100 kg

intake cross section: 5,000 x 3,500 mm motor power: 2 x 110 kW motor power hydraulic unit: 22 kW rotor flight circle: 635 mm rotor execution: 244 pcs. cutting tools on tool holders screen: hydraulically tiltable hopper volume: approx. 40 m³ machine weight: approx. 55 tons

Intake opening: 800 x 1000 mm Motor: 15 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 RPM Rotor cutting tools: new rotor with cutting inserts Screen design: reinforced, with ribs Hopper: With cover Machine weight: approx. 1,950 kg

Inlet cross-section: 1200 x 2300 mm Drive: 30 kW Rotor flight circle: 450 mm Rotor speed: approx. 80-140 RPM Rotor version: 24 single tooth Screen design: reinforced solid basket, with ribs Hopper: 1,000 mm in height, without lid Machine weight: approx. 6,000 kg Machine number: G-1-66

Inlet cross-section: 800 x 1000 mm Drive: 18.5 kW Rotor flight circle: 300 mm Rotor speed: approx. 140 RPM Rotor version: new rotor with cutting inserts Screen design: reinforced solid basket, with ribs Hopper: With cover Machine weight: approx. 1,950 kg Dust nozzle: Ø 250 mm

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor version: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe 200 mm diameter Machine weight: approx. 900 kg

Intake opening: 1,400 x 2,300 mm Motor: 45 kW Rotor flight circle: 450 mm Rotor speed: approx. 120-140 RPM Rotor version: 24 tool holders with cutting inserts Screen design: reinforced, hydraulically hinged, mechanically locked Screen perforation: Ø 80 mm Counter knife with cutting gap adjustment, hydraulically swivel-mounted Hopper: 1,300 mm high, without lid Machine weight: approx. 7,500 kg

Intake opening: 420 x 750 mm Motor: 7,5 kW Rotor flight circle: 250 mm Rotor speed: approx. 140 RPM Rotor cutting tools: 10 single teeth Screen design: reinforced, with ribs Hopper: 1,050 mm high, without lid Exhaust pipe: 200 mm diameter Machine weight: approx. 900 kg

Inlet cross section: 1200 x 1600 mm drive: 55 kW rotor flight circle: Ã? 600 mm rotor design: 36 PCs. cutting plates 60 x 60 x 30 mm screen perforation: 40 mm, HARDOX Counter knife with cutting gap adjustment

Inlet cross-section: 1200 x 1600 mm drive: 90 kW rotor flight circle: Ø 600 mm rotor speed: approx. 75Upm rotor version: 42 Pcs. cutting plates 60 x 60 x 30 mm on tool holders screen version: with quick-Change-device counter knife: with cutting gap adjustment gearbox: with torque-off material discharge by discharge conveyor TKF 400 x 5000 machine weight: approx. 13,400 kg machine number: A 2

Inlet cross-section: 420 x 750 mm drive: 11 kW rotor flight circle: 250 mm rotor speed: approx. 140 RPM rotor design: 10 single tooth screen version: ribbed reinforced Hopper: 1,050 mm high, with cover connecting Piece: Ø 200 mm diameter machine weight: 900 kg

Inlet cross section: 600 x 1000 mm drive: 11 kW rotor flight circuit: 250 mm rotor speed: approx. 140 RPM rotor design: 18 single tooth screen: ribbed reinforced Hopper: 1,050 mm high machine weight: approx. 1600 kg

Inlet cross-section: 1200 x 1600 mm drive: 55 kW rotor flight circle: Ø 600 mm rotor speed: approx. 84 RPM rotor design: 56 PCs. cutting plates 60 x 60 x 30 mm screen perforation : Ø 40 mm counter knife: with cutting gap adjustment machine weight: ca 7,000 kg

Inlet cross section: 2000 x 1900 mm drive: 2 x 75 kW rotor flight circle: Ø 600 mm rotor speed: approx. 84 RPM rotor design: 152 PCs. cutting plates 40 x 40 x 20 mm screen perforation: suitable to achieve the safety levels P2 to P5 according to DIN 66399-2 Counter knife with cutting gap adjustment machine weight: 21,000 kg

Inlet cross section: 2500 x 1900 mm drive: 2 x 110 kW rotor flight circle: Ø 745 mm rotor speed: approx. 93 RPM rotor design: 185 PCs. cutting plates 50 x 50 x 25 mm screen perforation: Ø 70 mm counter knives: with cutting gap adjustment machine weight: approx. 29,000 kg

Inlet cross-section: 1400 x 1600 mm drive: 55 kW rotor flight circle: 600 mm rotor speed: approx. 96 RPM rotor design: 50 PCs. cutting inserts rotor bearing: pedestal bearing screen perforation: Ø 20 mm machine weight: 9,100 kg

Inlet cross section: 1400 x 1600 mm drive: 90 kW rotor flight circle: 600 mm rotor speed: approx. 84 RPM rotor design: 34 PCs. cutting plates 60 x 60 x 30 mm on tool holders screen perforation: 60 mm counter knife: with cutting gap adjustment machine weight: approx. 10,000 kg machine number: 35

ZENO waste Shredder ZTLL 2000 x 1900 Inlet cross section: 2000 x 1900 mm drive: 90 kW rotor flight circuit: 710 mm rotor speed: approx. 110 RPM rotor design: 51 PCs. cutting plates 80 x 80 x 55 mm on tool holders screen perforation: 20 mm counter knives: with cutting gap adjustment machine weight: approx. 16,500 kg machine number: A 36

ZENO waste Shredder ZTLL 1200 x 1750 ideal for the shredding of IBC containers Inlet cross section: 1200 x 1750 mm drive: 55 kW rotor flight circle: 1000 mm rotor version: 51 cutting inserts, 50 x 50 mm Screen: 40 mm machine number: G-1-96