used WEISS wt

White Temperature Chamber Here we offer a white temperature chamber. White temperature chamber water-cooled Temperature range: from - 70°C to 180°C Temperature change rate cooling 10 K/min Temperature change rate heating 10.0 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ± 2.0 K Test room dimensions: width 580 mm x depth 615 mm x height 750 mm Housing dimensions: width 895 mm x depth 2080 mm x height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW Rated current 26 A Refrigerant: R-404A R-23 Weight: approx. 450 kg Control panel has been updated to a 24 volt version Type: WT11-270/70/10 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with le ...

White temperature cabinet Here we offer a white temperature cabinet. Air-cooled White temperature cabinet with S! MCON / 32 controller Test room capacity : approx. 195 litres Test room dimensions: height 750 mm, width 580 mm, depth 450 mm, External dimensions: height 1775 mm, width 870 mm, depth 1600 mm, Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation temporally in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant: R404 A 2.5 kg Gwicht : 490kg Type: WT3 - 180/40 For you as a buyer for security the following information! The following points are  ...

Stock # U825V Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to ...

White temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn and winter - your products must be able to withstand different temperatures during manufacture, transport, storage and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test room volume: 500 ltr. Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of construction: 1990 Condition: used Complete plant closure, large selection of mezzanine, pallet racks, shelve ...

We offer here a climate test chamber from Weiss with Feucht! The climate test chamber was only serviced by Weiss/Vötsch in Dec, 2020 and has the test sticker until Dec. 2021! All tests were carried out, another test run was carried out in our company, the humidity and temperature were checked with calibrated test equipment. The climate test chamber has been subjected to an annual inspection and is in a perfect condition! The logbook is attached WHITE 1500SB/010JU/40DU Temperature range -40°C - +180°C Humidity 15%- 95% Air conditioning: +10°C - +95°C Pihyv Test room: 1500 liters Internal dimensions: 1490 mm deep, 1100mm wide, 945mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2,00kg Cabinet has no feet and stands stably on a frame If you have any further questions, please do not hesitate to contact us

Weiss Air Conditioning Ultraclean ULTRA 55.2  Manufacturer: Weiss Klimatechnik GmbH Device type: Ultraclean, ULTRA 55.2 DXU Year of construction: 2007 Nachheitzer 10.5 kW Cooler: 12.7 kW Humidifier: 3 kg/h Filter class: F7 Supply air flow 2500 m{h ext. pressing 200

Weiss climatic test chamber with humidity -72°C to +180°C approx. 335 liters WK3-340/70 Already upgraded to the new R452A refrigerant Here we offer a Weiss climate test chamber. Air-cooled Temperature Testing Volume 335 liters Test Chamber Dimensions: Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Minimum temperature –72°C Maximum temperature +180°C Temperature change speed, cooling 3 K/min Temperature change speed, heating 3 K/min Temperature deviation, timed ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ±1.5 K Climatic test: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time ± 0.1 to ± 0.3 K Temperature homogeneity spatially ± 0.5 to ±1 K Moisture deviation over t ...

Weiss Temperature Test Chamber KWP 64/75 Cooling-heating mode : -70°C ... +130°C Cooling: 2.5 approx. k/min Heating: 3.0 approx. K/min Temperature stability: +-0.5...+-1.0K Insertion dimensions: height 1360 mm, width 880 mm, depth 1000, mm External dimensions: height 1215 mm, width 800 mm, depth 960 mm Test chamber dimensions height 400mm, width 500mm, depth 325mm The connection voltage is: 230V/1Ph+N+PE/ 50 Hz (+6%/-10%) Gplvqvbz Connected load: 1.4 kVA Plug: Schuko 16A Weight : 180 kg Type: KWP 64/75 The Weiss temperature chamber has been monitored with calibrated and calibrated test equipment!

Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition

Vötsch Weiss Here we offer a climate chamber. Water-cooled Temp. -60°C to +80°C Internal dimensions (usable space): Height approx. 2200 mm Width approx. 2800 mm Depth approx. 2400 mm Cooling speed approx. 1.2 K/min Heating speed approx. 1.2 K/min Heat compensation -25C min 15000 W chiller min 30000 W auxiliary cooler Refrigerant R404 A / R23 Humidity range 15 -95% (without heat load) Humidification by fully desalinated water Further information is available on request Type: SB/14'/60 - S Condition: used Sales are made from location! Only available from 01.08.2021 Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone.

Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Electric motor, three-phase motor, brake motor -Manufacturer: Weiss, electric motor with brake -Type: 5.5AZK 90L-8T B14P140 -Power: 0.55kW -Speed: 675 rpm -Brake: 20 Nm -Shaft: Ø 24 x 50 mm -Construction: B3 -Protection class: IP 55 -Number: 2x motor available -Price per piece -Dimensions: 385/175/H230 mm -Weight: 19.4 kg/pc.

Weiss WK-1000/70 Climatic test chamber -70 to +180 °C White WK-1000/70 Climatic test chamber 990 litres Climatic chamber -70 to +180 °C with humidity 10 to 98 % Test chamber dimensions: Height 950 mm Width 1100 mm Depth 950 mm More items - new and used - can be found in our shop! International shipping costs on request!

Weiss SC 1000/+20IU Corrosion Climate Alternating Test Chamber White SC 1000/+20IU down to –20 °C Salt spray chamber More items - new and used - can be found in our shop! International shipping costs on request!

Weiss SC/KWT 450 Corrosion Test Chamber Specifications: Test chamber capacity 480 l max. load 100 kg Brine storage tank 180 l Applications: Corrosion tests: Salt spray test: room temp. up to +50 °C Condensation test: room temp. up to +45 °C Voltage: 1/N/PE AC 230V +-10% 50Hz Combination: Salt spray test SS: DIN 50021 Condensation test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Type: SC/KWT 450 More items - new and used - can be found in our shop! International shipping costs on request!

WEISS AGGLOMERATOR, for LDPE LLDPE HDPE PP PS PET, complete with loading belt, metal detector, dual chamber system, n.2 rotating knives on each chamber, n.2 x 160 kw drives, control panel + electric cabinet, including :, extraction blower, pipes, cyclone, bag holding structure, INSTALLED POWER: 320 kw, CAPACITY: 1.000 kg/h, PRESENT CONDITIONS: disconnected, SERVICES AVAILABLE: full reconditioning on separate offer

White Temperature Test Chamber Here we offer you a white temperature test cabinet. White temperature test chamber air-cooled approx. 124 liters Dimensions and design of the test chamber Internal dimensions Height 490 mm Width 540 mm Depth 470 mm External dimensions Height 1230 mm Width 780 mm Depth 1112 mm Bushings in the side walls: 2 pcs., NW 560mm 1 pcs., NW 100 mm Specifications: Temperature range -40°C to +180°C Temperature change rate Cooling: 2.0 Kimin to -10°C Temperature change rate heating: 2.0 Kimin Electrical connection: 380V/3PH+N+PE/50 Connection value: 4.4 kVA Refrigerant: R-404A Weight: 270 kg Type: 125 SB/+10 JU/40 DU For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant r ...

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

Remotely controlled clamping car from the right! Remote-backed tensioner IDEAL 2 H/2-Pk auxiliary car HW 4/3- Pk 1x left and 1x right in stock!! ; Werkstaettengeprueft

White IDEAL 2H/2 Pk track width: 900 mm height of track to run 400 mm fully hydraulic, with KABINE and control panel, auxiliary trolley electric, very good

Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Technical data: -max load capacity 300 kg -maximum clamping diameter approx. 1500 mm -Chuck diameter 300 mm -Bore hollow shaft approx. 60 mm -Rotation Electr. infinitely variable - right - + links - course -Transmission of welding current approx. 350 A -Drive 400 V / 2,2 kW - space requirement approx. B H 800 x 1150 x D 700 mm -Weight approx. 500 kg

Sell a mobile suction system. Well suited for double grinding brackets, tool grinding machines Suction comes from a laboratory workshop and came for sale because of the site closure Dimensions 660mm*680mm*1900mm High top suction pipe Weight150Kg Ffirn32r Extraction capacity 1250m3/h Energy demand 1.1Kw

Scatterattachment Küpper-Weisser STA 95 – E50H, spreader for trucks with usable volume 5 m3, screw conveyor, hydraulic drive, spreading width 1 to 6 m, with tarpaulin folding roof, all-round warning light, GPS antenna, wind shield, control panel. More scattering and clearing technology available, see photos!

Gritter Küpper Weisser STA 95 W20 B, attachment device for Unimog, truck etc. driven by B & S petrol engine. Content 2.0 m. equipment: without plan retractable roof. Weight 800 kg. Not functional, corrosion, engine goes on strike - unaudited. With controller and documentary. More spreaders and winter maintenance technology stock! -Jacobis local, environmental & green care technology- Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing operations & decommissioning, environmental care, motors and more...