WEINBRENNER gp used machines

pressure: 80.0 t chamfer lenght: 2050 mm distance between columns: 1550 mm column arm: 250 mm table width: 85.0 / 135 mm stroke: ca. 390 mm dayligth: ca. 585 mm ajustment speed: 180 mm/sec working feed: 1.0 - 10.0 mm/sec return speed: 135 mm/sec work height max.: 1050 mm Number of working hours: 32.495 h oil volume: 200 l operating pressure: 320 bar total power requirement: 11.6 KW weight of the machine ca.: 7300 kg range L-W-H: 3700 x 2000 x 3000 mm ** Good/well-maintained condition (!!) - in checked conditions - machinevideo - https://www.youtube.com/watch?v=IKyUmzB0WTI ------------------------------------------------- CNC electro-hydraulic press brake with: * Increased installation height .. approx. 550 mm * Increased cylinder stroke .. approx. 390 mm ------------------------------------------------- Features: - Robust electro-hydraulic press brake * MADE IN GERMANY (!!) - CYBELEC CNC ...

Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available.

* General * SKU332X713 * LocationBarneveld * MakeIgefa Weinbrenner * Type061U-600-600 * No.50467 * Year of construction2014 * Pressure * Vacuum possiblecheck * Vacuum possible jacketcheck * Working pressure shell10 Bar * Vacuum possible shellcheck * Working pressure tubes10 Bar * Tubular vacuum possiblecheck * Main Features * Shell (Material)Stainless steel * Tube (Material)Stainless steel * Surface41 m2 * Specified Features - Shell and tube heat exchanger * MaterialStainless steel 1.4571 (316Ti) * Heat exchangercheck * Horizontalcheck * Heating surface41m² * Tube capacity582 l. * Number of tubes:178 * Tube diameter33,7 mm * Tube length2200 mm * Wall thickness tubes2 * Max. temperature0°C/+200°C * Shell capacity252 l. * Shell diameter600 * Shell length2500 * Max. temperature0°C/+200°C * Shell connectionsDN80 * Cover connectionsDN500 * Information * Mounted on framecheck * Total heig ...

Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration  ...

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm Control: CYBELEC VisiTouch Pac stroke of ram: 524 mm weight of the machine ca.: 17.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4050 mm plate thickness: 20 mm distance between columns: 4100 mm column daylight: 4200 mm no. of strokes: 10-20 Hub/min working pressure: 250 bar total power requirement: 85 kW weight of the machine ca.: 43,6 t dimensions of the machine ca.: 5,5x2,8x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 3050mm, material thickness: 6mm, throat depth: 200mm, back gauge adjustment: 1000mm, drive power: 15kW, cutting angle range: 1°-2°, table height: 900mm. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2100mm, weight: approx. 8500kg. On-site inspection is possible.

pressure: 200 t chamfer lenght: 3050 mm distance between columns: 2550 mm stroke of ram: 274 mm control: Cybelec ModEva Pac total power requirement: kW weight of the machine ca.: 17.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3600 mm distance between columns: 2650 mm dayligth: 500 mm throat: 300 mm stroke: 250 mm working feed: 10,5 mm/sec return speed: 100 mm/sec ram stroke speed: 150 mm/sec table height: 900 mm oil volume: 500 l total power requirement: 37 kW weight of the machine ca.: 17800 kg dimensions of the machine ca.: 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t chamfer lenght: 3550 mm distance between columns: 3000 mm Control: Cybelelc DNC 1200 total power requirement: kW weight of the machine ca.: 18.500 kg dimensions of the machine ca.: 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping at top and bottom - Die shift - Hydraulic crowning - Support arms - Cybelec DNC 1200 control - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, inclined stop - Protective grille The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type of press: 2-cylinder synchronized press, pressing force: 125t, rated pressing force: 110t, bending length: 3000mm, ram stroke: 360mm, installation height: 540mm, distance between frames: 2550mm, hydraulic pressure: 256bar, weight: approx. 12000kg, control system: Cybelec DNC 7000 Graphic. Including various tools. The control system and the screen were renewed in mid/late 2025. An on-site inspection is possible.

Scissors

Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

Reference Num.: 3742 Brand: Adast Type: Tiegel Grafopress GPC Size: 260 x 380 mm Available: directly Status: In production Location: Deutschland Sheet size: max 260 x 380 mm

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

floor-plate length: 3000 mm floor-plate width: 1500 mm floor-plate height: 150 mm total power requirement: kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 3,0 x 1,5 x 1,3 m The welding table is made of 15 mm thick steel plates. assembled and welded. The table stands on height-adjustable feet. The mounting holes for the assembly and fastening parts have a diameter of 28 mm. A starter package with alignment and fastening parts is included at a price of € 750,00 (price is included) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 12 mm, 1000 mm

Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled backgauge up to 1000 mm Cutting length limitation Cut edge lighting Light barriers for the rear area Spare blade Weight approx. 9000 kg

Mint only 300 operating hours. Can be viewed on site. Dip-Tech GP Series – Industrial Digital Printing Machine for Glass (Ceramic Printing) Bjbsypllcjn Efavpscw High-end digital printing system for architectural, automotive and specialty glass The Dip-Tech GP Series is an industrial digital printing press for ceramic direct printing on glass. Developed for heavy-duty production, it combines the highest print quality (720 DPI), high speed (up to 33 m²/h) and maximum flexibility for glass formats up to 2400 x 6000 mm (depending on model). Thanks to the patented Drop-Fix system (air convection technology), the ink is optimally fixed – for finer details, sharper lines, reduced colour gradients and excellent colour brilliance. Technical highlights: ✔ 12 printheads / 720 DPI ✔ Up to 33 m²/h production capacity ✔ Glass thicknesses: 2–19 mm ✔ Glass sizes: 80 ...

Sharpened blades Machine with yearly maintenance Strokes per. Min 10 - 35 Back gauge range 10 - 1000 mm Motor size 15 kw Programmable motorised back gauge 1.5 metre side gauge 1.5 metre front support Shadow line light Automatic hydraulic hold down clamps Centralised lubrication Footswitch Shadow light beam Cycle counter Automatic shearing contacts in back gauge Blade gap and rake angle adjustment Front flip stops Adjustable stroke Work chute Hour counter Auto-diagnostics - Operating hours: 40.347 - Folding length: 4.000 mm - Folding length: 4.000 mm - Material thickness stainless steel max: 60/kg/mm2--6 mm - Material thickness steel Fe52/Fe37 max: 45kg/mm2-- 8 mm - Motor power: 5,5 kW - Control: STEP AUTOMATION EASY CUT - Dimensions (long x wide x high): 4.600 x 2.200 x 2.200 mm - Weight: 10.100 kg

Specifications: Maximum cutting width: 2050 mm Maximum cutting capacity steel: 0.5 - 4.0 mm Adjustable rip fence: 1050 mm Retraction function Cutting gap adjustment Working height: 1030 mm Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 3,6 tons

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg