WEILER praktikant used machines

L+Z Lathe WEILER Praktikant 160 – Partially Overhauled Machine in very good used condition – delivery on order, delivery time by arrangement! ✅ Technical data Year of construction: approx. 1990 Digital Display: 3-Axis (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter via support: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar passage: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Threading: Metric, Inch, DP, Module Tailstock: MK 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Accessories 3-jaw chuck 160 mm (NEW) Quick-change steel holder + 1 insert Electric Lining Guard (NEW) Work light (NEW) Complete machine documentation Emergency stop Various tension wrenches Coolant Setup L+Z Spindle  ...

WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition

WEILER Praktikant 140 B lathe YOM 1991, Serial No. 91-2735 With 3-axis digital readout Heidenhain Centre height 140 mm Swing over bed 280 mm Swing over support 158 mm Centre distance 650 mm Spindle hole 40 mm Spindle speeds 24 to 2500 rpm Tailstock Pinole Ø 40 mm Taper MK 3 Stroke Pinole 85 mm Feeds from 0.02 to 0.63 mm/rev Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible Metric thread pitches from 0.25 to 8 mm Weight approx. 680 kg Accessories: -set of collets -knife holders -x2 jaw-chucks -others The machine has only been used in Germany. Very quiet drives, excellent condition

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning length: 800 mm turning diameter: 280 mm turning diameter over slide rest: 150 mm spindle bore: 42.0 mm tailstock quill taper MT: 3 MK bed width: 208 mm turning speeds: 42 - 2022 U/min spindle taper: DIN 55027/5 quill stroke: 90.0 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 750 kg range L-W-H: 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS  ...

greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS & ...

Weighing fraesing machine WEILER FHP750, table 750 / 200 mm, 550 / 180 / 400 mm

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

“TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Running bezel of a hamlet E110 The bezel is almost unsubstonible

Manufacturer: WEILER Machine Tools Type: DZ 28 CNC Built: 1997 Connection power 25 kW Numerically controlled linear turning center for the production of precision workpieces in the small parts sector. The two machines are driven via a controller. As shown, the machine includes vertical material supply, the machining machine with chip conveyor and control devices, control cabinet and hydraulic unit. The machine was in operation at the site in Germany until production ceased. The machine is dismantled.

turning diameter: 720 mm turning length: 2000 mm control: Siemens 805 greates pass round over bed: 720 mm bed width: 480 mm spindle diameter in front bearing: 150 mm spindle bore: 106 mm swing diameter over face slide: 430 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Weiler Primus precision lathe with milling device is offered and extensive accessories in very good condition. A large part of the accessories are unused. Specifications: Center height 120 mm Distance between centers 420 mm Swing diameter over bed 245 mm Spindle bore 23 mm Spindle speeds 18 Speed range 60 - 3000 rpm Motor power 1.1 / 1.5 kW Motor spindle brake Large feed protection - chip protection hood External dimensions approx. Length 120cm Depth 750mm Height 170cm Weight approx. 500 kg Accessories: Multifix A - 5 steel brackets 3-jaw chuck Ø 125 mm 4-jaw chuck Ø 125 mm Various interchangeable jaws Thumper CGN-1969 Eccentric lathe chuck 80mm (unused) Face plate Carrier for rotary heart Standing bezel Moving bezel Collets for internal and external clamping Various moving bezels Extensive accessories for milling equipment such as clamping screws, cl ...

Ref. -No.: 10367 Manufacturer: WEILER Year of construction: 1996 Type of control: CNC Control: Siemens Storage location: Halberstadt Country of origin: Germany Turning Speeds: 500 RPM Machine length: 7000 mm Machine width: 2300 mm Machine Height: 2600 mm Weight Of The Machine Ca.: 9,25 t Spindle Taper: 6 Mk Travel quill: 300 mm Bed width: 800 mm Turning Length: 3000 mm Turning Diameter Over Bed: 900 mm Swing Diameter Over Bed Slide: 530 mm Spindle Bore: 254 mm Spindle power: 45 kW Tailstock - Insertione Into The Sleeve: 140 Ø Max. Workpiece Weight: 5000 kg Further information: Machine can be inspected under power.

Tip distance approx.                                                    400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          450 kg

Tip distance approx.                                                    500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx.                                          400 kg

Used Weiler meat grinder, model 878 AG.

Approximately 3,000 running hours. Key Information: Output: 3150 containers per hour 250ml; 2700 containers per hour 500ml Molds and tooling for 250ml and 500ml IV bags/bottles (14 cavity) included Tooling for Eurocap or nipple/pierce top presentations Eurocap cap welding machine with cap elevator Three product filters 14 parison programable parison head with Moog controller.

turning diameter over bed: 380 mm turning diameter over slide rest: 0 mm turning length: 950 mm centre distance: 1000 mm centre height: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.