used WEHRMANN combima

Double end tenoner for massiv wood panels Brand: Wehrmann Type: Combima Year: 2007 Wehrmann designed: sturdy, high quality and NC controlled - The IMA Combima machine chassis makes our machine very sturdy - This machine is modular equipped with the below listed units - Heesemann as a High-Quality brand supplied us with their sanding technology - NC controlled with grinding units 1 motorized width adjustment max. working width: approx. 2,500 mm min. working width: approx. 280 mm low-maintenance precision roller transport chains, with 80 mm wide and 85 mm long chain plates, driver cams, distance 1,080 mm, pneumatic cam control at 3 heights (6, 12, 18 mm) 2 top prints, electromechanically height-adjustable, each with a double composite V-belt 80 wide, left and right; Motorized height adjustment via axle working height approx. 950 mm electronic frequency contro ...

single-sided direct postforming machine Brand: Wehrmann Type: Combima /K/I/R80/1260/V Year: 2018 Varied using for doors, worktops, furniture parts, curved caravan fronts, etc. Technical data: A single-sided throughfeed postforming machine for the postforming and postfolding process, for processing curved workpieces in caravan construction. For workpieces to be profiled made of wood/wood materials with laminate (CPL,HPL) as surface material. The laminate protruding for the postforming process is located in the machine on the underside of the workpiece and is formed from the bottom to the top. Technical data Machine Constant workpiece projection from the chain conveyor: from approx. 35 mm Throughput width min.: 130 mm ( only for straight parts ) Workpiece length in feed direction min.: 1,000 mm Basic height: 940 mm (upper edge of chain conveyor) The workp ...

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left han ...

Spiked roller WEHRMANN for better gluing on solid wood / plywood

Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit Possible execution: - spindle drive: for one or two gluing units - bayonet adapter: for one or two gluing units

- Manufacturer: RATIONAL - Model: CombiMaster Plus CMP 101 G - Capacity: 10 x 1/1 GN - Number of meals/day: 80-150 - Power: 0.5 kW - Dimensions (D x W x H): 776 x 847 x 1042 mm - Weight: 167 kg - Water inlet (for compressed air hose): 3/4'' / d 1/2'' - Water Pressure (Flowing Pressure): 150-600 kPa / 0.15-0.6 Mpa / 1.5 - 6 bar - Nominal heat load LPG liquid gas "Steam": 20 kW - Nominal heat load Total natural gas: 22 kW - Nominal heat load Natural gas "Steam": 20 kW - Nominal heat load Natural gas "Forced Air": 22 kW - Steam mode: 30°C to 130°C - Forced air mode: 30 °C to 300 °C - Mixed mode (combination of steam and forced air): from 30 °C to 300 °C - 3 automatic cleaning programs - 5 air speeds: Rather low or high, the CombiMaster® Plus has the right speed for every food.

Manufacturer: IMA PU Kantenbearbeitung, Type: Combima, Year: 2003, Control: ima, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 85, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-55, Min-max feed m/min: 6-30, Einlauflineal gesteuert: yes, Premilling: 2 X 6,6, IR zone: 2 , Power per lamp: 2 X1,5, Coil magazine: 32, Mitre stations: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Rolling chain: yes, Spraying system 2: yes, Pre-smelting Kg/Hr: yes, Buffing unit: yes, Separation agent setup: yes, Year :2003

Manufacturer: IMA, Type: Maschinenstrasse Combima, Control: IMA, Work piece width min-max mm: 1 Maschine 250-1500, Min.-max. workpiece length in mm: 2 Maschine 250-2600, Min.-max. workpiece height in mm: 10-50, Feeding: Ja, Machine no 1: yes, Angular transfer: yes, Machine 2: yes, Drilling machine no1: no, Destacking unit: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Nockenabstand mm: 850, Coil magazine: 6-fach, Feeding speed max m/min: 10-30, Premilling: yes, Strip magazin: no, Kantenmagazin: yes, Mitre stations: yes, Trimming saw: yes, Büdigfräsen: yes, radius milling: yes, Fasefräsen: yes, Contour milling type: MFA, Radius scraper: yes, Flat scraper: yes, Spraying device: yes, Maschine vorführbereit: yes, Year :2000

Description: Max. panel width 3300 mm Min. edge thickness 0.4 mm Max. edge thickness 3 mm Max. forward feed speed 30 m/min Conveyor Track with dogs , Pressure with rubber belt NO. PANEL SIZING / MILLING , Unit : scoring unit motor power : 4.4 KW r.p.m. : 6000 RPM NO. PANEL SIZING / MILLING , Unit : double chipper, top and bottom Constructor model : 75.30 NO. PANEL SIZING / MILLING , Unit : miller hogger NO. PANEL SIZING / MILLING , Unit : miller hogger Edge coil magazine , no. positions 2 glue pot for EVA hot melt glue , premelter for EVA hot melt glue , Roller set to press the edge , no. pressure roller 5 No. Edge Processing Units , Processing Unit : end trimming Constructor model : 08.412 no. motors : 2 Processing Unit : fine trimming to trim and round Constructor model : 08.055 no. motors : 2 Processing Unit : Corner rounding Constructor model : ...

We have a wide range of dosing devices in our warehouse and workshop. Several Yamato, Ishida, Combimat multi-head scales. Lots of Rovema, Webb snail dosages! Depending on your product, your wishes and possibilities, we can offer you a suitable dosage.

a top-class convectomat, hot air damper / convectomate/ combi damper / CombiMaster , gas-heated, 50-250C. External dimension: 1240x960x1400mm, internal dimension: 620x640x830mm with stikken trolley for 10xGN2/1. Electrically controlled, 400V, 0.3kW. Good condition.

Manufacturer: IMA, Ersatzteil aus Maschine: COMBIMA, Rollendurchmesser max-mm: ca 600, Rollenstärke max-mm: 60, Magazinschächte : 6, Vertikal: yes, Movable: yes, pneumatisch ansteuerbar: yes,

Manufacturer: IMA, Ersatzteil aus Maschine: IMA Combima, für Maschinenseite links: yes, Motorenanzahl: 2, Motor : yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, Revolver Verstellung: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Wellenmasse L x D mm: yes, kW-Leistung : 0,5, Drehzahlen U/min : 18000, Manufacturer: IMA,

Manufacturer: IMA , Ersatzteil aus Maschine: IMA Combima, für Maschinenseite links: yes, Motorenanzahl: 3, kW-Leistung : 0,5, Volt/Hz : 380/220, Drehzahlen U/min : 18.000, Siko Anzeige : yes, Horizontal Rollentastung : yes, Vertikale Rollentastung: yes, Motor 2: yes, kW-Leistung 2: 0,5, Volt/Hz 2: 380/220, Drehzahlen U/min 2: 18.000, Siko Anzeige 2: yes, Horizontal Rollentastung 2: yes, Vertikale Rollentastung 2: yes,

Manufacturer: IMA Verleimteil aus Combima, Tankvolumen Liter: 1, FREE TEXT: Verleimteilhöhe 60 mm/,

Manufacturer: IMA Verleiteimteil gereinigt, Spare part from machine: IMA Combima, Gluing part left side: yes, Tankvolumen Liter: 1, Min-max height of gluing part mm: 60 mm,

Manufacturer: IMA Ersatzteil Combima, Type: Verleimteil, Tankvolumen Liter: 1,

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: IMA Faseschleifaggregat, Spare part from machine: Combima, Motor : 1, kW-Leistung : 1.75, Drehzahlen U/min : frequenzgesteuert, Vertical roller sensing: yes, Baugrösse L x B x H mm: 400x700x900, Slewable vertically: yes,

Manufacturer: IMA Doppelzerspaner, Spare part from machine: Combima, Number of motors: 2, kW-Leistung : 4.4, Siko Anzeige : yes, Baugrösse L x B x H mm: 650x650x1200, Revolver adjustment: no, Slewable vertically: no, kW-output 2: ca 4.4, Silo indication 2: yes,

Manufacturer: IMA, Type: Vorschubgetriebe, Year: 1993, FREETEXT1: aus IMA Combima 1993, FREETEXT2: FDR 132S/4 Q B60, FREETEXT3: 1440 U/min, FREETEXT4: 5 kw, Year :1993

Manufacturer: IMA, Type: Schwabbeln, Ersatzteil aus Maschine: IMA Combima, Polieraggregat: yes, Oszilierend : yes, Kw output: 0,55, Volt/Hz: 220 / 380, Drehzahlen U/min: 3.000, Kw output: 0,55, Volt/Hz: 220 / 380, Drehzahlen U/min: 3.000, Preis pro Stück Euro: 1.000, Gebraucht: yes, Preis pro Stück Euro: 1.000,

Manufacturer: IMA, Type: Schwabbeln einfach, Year: 1993, FREETEXT1: aus IMA Combima, Year :1993

Manufacturer: IMA Fräsständer, Spare part from machine: IMA Combima, for left machine side: links, Motor : Perske, kW-Leistung : 4,5/6,6, Drehzahlen U/min : 5800, Siko Anzeige : yes, Horizontal Rollentastung : no, Pneumatically controlled: yes, Slewable vertically: yes, Available: Bautiefe 400 mm,

Manufacturer: IMA , Type: doppelseitiges Schwabbeln, Year: 1993, FREETEXT1: aus IMA Combima, FREETEXT2: 4 Fach Polierbürste, FREETEXT3: ca. 0,5 kw, FREETEXT4: Bestückung scotch-Sisal, Year :1993