We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Manufacturer: Weber, Type: OFZ-KS 2, Year: 1993, Control: Weber, Monting of the machine: Quer/lkombi-Schuh/längs, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350/4650 X 150, Rubber roller: 1, Shore roller 1: 150 mm (gummi), Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 1 Schleifbandgeschwindigkeit m/s : 11/22, Belt 2 shoe unit: Kombi, Band 2 Kombiaggregat Walze/Schuh: yes, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-20, Band 3 Kombiaggregat Walze/Schuh: schuh, Band 3 Leistung kW : 11, Band 3 Schleifbandgeschwindigkeit m/s : 2-20, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 4-25, Intermediate sanding of lacquer: yes, Constant table hight: ...
used
Manufacturer: Weber, Type: OFZ 1 - 1350, Year: 1993, Monting of the machine: Walze, Sanding width mm: 1.350, Sanding hight mm: 3 - 120, Number of sanding belts: 1, Sanding belt dimensions: 2.620 x 1.350, Werkstückdickenmesseinrichtung mittels Ultraschallsensor : no, Table hight adjustment by engine: yes, Rubber roller: 1, Band 1 Leistung kW : ca 18, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: ca 5 - 15, Transportbandantrieb kW: ca 3, Intermediate sanding of lacquer: no, Year :1993
used
Description: Cross belt unit Wide belt unit ( contact roller ) Wide belt unit (combi) Wide belt unit (cushion) Brush unit Sanding pad Working width 1350 mm Working height 850 mm Workpiece height 4 - 150 mm Hours read off approx. 5'745 without laptop and without sanding time recording without hand scanner and without compressed air lines on the machine Replaced parts: Replaced brake module from the sanding belt and frequency converter from the feed, with operating instructions and CE certificate serial number: 91.445.30, total electrical load: 73 kW, hollow height: 4-150 mm, Approx. Onsite Dimension. (l x w x h): 2,900 x 2,350 x 2,440 mm, weight approx.: 5,000 kg
used
According to the description below
According to the description below
used
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW 1Z1P, 2x resistance welding unit ET 15.1/15kVA power, without documentation, an on-site inspection is possible.
used
Weber 5200 label applicator attached with a Zebra 170PAX4 printer: - Year of production: 2005 - Serial number: W5200v21795 The Weber model 5200 Series systems offer a choice of three application methods: air blow, flex-tamp, or tamp-blow. All methods provide precise label placement of ±0.06. The new systems feature several options designed to maximize versatility: - A quick-change tamp pad - Height sensor - Multiple I/Os - Adjustable stand Label height: 190mm Condition: good Dimensions: 1.250mm x 1.000mm & 1.800mm (LxW&H)
used
Line includes Slicer WEBER CCS 902, Pickler WEBER CCA and a grinding machine with a spare blade and spare parts.
used
Weighing range: 60-250g, screw rotational speed: 2945/min, connected load: 2.7kW, with backfilling and screw.
used
Weber ASB 400 skinner, cutting width 400mm, can be used (open) as combination machine with carriage table or (closed) with pressing unit and conveyor. You are very welcome to inspect the machine in 56070 Koblenz, Germany.
new
Hydraulic bottles Jack stamping trolley lifter for trucks and commercial vehicles. Manufacturer Weber Hydraulics Lifting capacity 20to Building height 240mm Lifting distance 155 mm Threaded length 110 mm Total length extended and thread turned out 505 mm Diameter piston rod 60 mm Unused lifter from Bundeswehr bestaenden, without oil filling and without pump ingestion rod. 12 stueck available, price per piece. Special price
used
Slicer Weber SLC 901, machine no. 1053, in good used condition. High-performance slicer, made entirely of stainless steel, with weighing unit, as returned by the customer. Dimensions W/D/H 480/120/200 cm. Connection values 400 volts, 12.7 kW. More on request.
used
No. 2630: 1 gebr. CNC vertical milling machines and drill / jig boring machine Fabr. BURKHARDT & WEBER Type 120 NCW HYOP Retrofit / overhauled in 2000 with HEIDENHAIN TNC 426 PB ARB.-ber.: 1250 x 630 x 560 mm Power: 44 kW Accessories: fixed table / table 1200 x 710, additional table top height 200 mm,. 36-Fach tool changer magazine, coolant system / coolant. HEIDENHAIN - probe / probe TS 630 -the pictured magnetic clamping table is not included! -Miscellaneous: spindle ISO 50, revs / speed range 30-3000 min-1 (with optional high-speed spindle) Max torque / torque 522 NM Rapid / rapid feed 10 m / min maximum distance spindle nose - table surface 725 mm Projection spindle Center - stands 800 mm. Space requirements / measurements approx. 5 x 5 m, weight / weight approx. 12 to The engine was overhauled in 2000 General / retrofitted and modernized with digital drive ...
used
Various vibrating pans, sorting and feeding units, etc.
used
Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader Npjrx All the goods in very good, ready-to-use condition.
used
Broadband grinding machine Weber LCE 1000 Intention with vacuum table Grinding width 1350 mm 2 aggregates: 1 x contact roller 1 x Grinding shoe L x W x H: 2000 x 2200 x 2200 mm Weight approx. 2500 kg Built in 2007 The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4952 Eriswil/EN-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Valve bag filling, big bag filling, dust removal Manufacturer Weber Waagenbau Built in 2003 Currently designed for 50 kg and 25 kg valve bags as well as classic big bag Power approx. 8.0 to /hour Approx. 12 meter long belt conveyor conveys into the storage container (less than 5m3). Among them are the scales and lock. Filling optionally in valve bags or big bags. Sack magazine and automatic bag plug. Filled sack falls on small conveyor belt. Can be connected to a palletizing - please request palletizing separately. Control cabinet and control included Siemens Control Panal, Siemens Control Electrical connection Separate steel construction included. Bagging machine is particularly suitable for filling valve bags with bulk materials that are grainy, small or semolina-shaped. Cereals, wheat, rye, spelt, barley, ... Also suitable for legumes. Beans have already been ...
used
According to description pdf attached complete line for profiles + WPC profiles
used
Cutting depth: 220 mm weight of the machine ca.: 375 kg 4 new blades: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Used weber cheese slicer. New 2007.
used
Large format printer Manufacturer: Roth and Weber Model: 3300-6 Year: 2004 Equipment 6-roll fully automatic machine Number of prints 399,369 sqm Availability: now Condition: Defects 1 piece of heating lamp must be replaced Location: germany Price: on request
used
Product number: 2397P Weber slicer Type: CCS904 Serial number: 7096 Year of construction: 2007 Capacity: 2000 RPM Slice thickness: 0.5 - 50 mm Compressed air: 10 Bar, 150 L/min. Power: 3 x 400V, 50Hz, 10 kW Dimensions: 13400 x 1900 x 2600 mm Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit Multivac thermoformer Type: R530 Serienummer: 115612 Year of construction: 2007 Film width: 560 mm Index: 1200 mm Dye: 3.5 Power: 3 x 400V, 50Hz, 36.5kW Dimensions: 14850 x 1300 x 2450 mm Hard film machine for vacuum and gas flush Pago labeler Type: System 516 Serial number: 212516068 Year of construction: 2012 Mettler Toledo metaldetector and checkweigher Type: XS3 Serial number: 35000430 Year of construction: 2008 With reject Mettler Toledo X-ray machine Type: Safeline R20 Serial number: 3113R20V3268 Year of construction: 2013 ...
used
Technical data Dimension of the workpice: Width: 300 mm Height: 8 - 100 mm Execution for: deburing Dim. de la bande transport: Length: 2400 mm Width: 300 mm Vitesse de la bande de transport: 2 - 12 m/min Voltage 50 Hz 3x: 400 Volt Total power required: 7 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 2300 mm Width: 2200 mm Height: 2250 mm Various accessories: Dust extraction: Sideros Eco 2
used
Hydraulic multi-spindle drilling machine make BURKHARDT + WEBER type HGB 100Order.-No: . 12141100 year of manufacture 1984Technical specifications:Feed :3-1400mm/min.Table size dia.: 550 mmGuide plate: 600 x 600 mmNumber of taps:412 speeds: 140 - 2800 rpm.Dimensions approx.: 2000 x 1800 x 2800 mm Hydraulic dimensions approx.: 1500 x 1000 x 2200 mmControl cabinet dimensions approx.: 2100 x 1100 x 700 mmWith- Automatic- separate hydraulics- control panelused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Bluhm Weber Legi-Air 4050S Labeling Machine 4.14.1 Basic structure The system is designed as a closed aluminium profile frame and has a very compact design. The control cabinets are integrated in the lower part of the frame. The main valve terminal is located behind a service door below the control panel. The facility includes four workplace stops. Operation is via a touch screen. The control panel is mounted on the right side of the frame. In the station, a labeling system from Bluhm Weber is used, here the documentation of the company Bluhm applies accordingly. 4.14.2 Functional sequence - The retracting workpiece carriers with IO modules are stopped, excavated (positioned) and contacted in the substations 10.1 or 10.2. In these two stations erf - In substation 10.3, the IO modules are automatically labelled. The generation of the labels and their content ...