We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
for torsion springs wire diameter 0,5-2 mm spring diameter 20 mm output pieces/min 70 spiral length 80 x 120 mm
used
wire diameter 0,5-2 mm spring diameter 20 mm flange length 80x120 mm working width 90 mm output - pieces/min 70
used
Various machines mostly Wafios or Deiters available! Eg. Wafios UF30 / VDF80 / DF3
used
We can offer you all types of Wafios nail machines from S25 - N90
used
We offer wire looms asking for current offers. abc.steinfels-kg.de
used
Wire range: 3-6mm, speed: 60-80/min, max. coil weight: 1t.
used
Outer spring diameter: 5-16mm, wire thickness: 0.5-1.3mm, angle ratio: 6-18, max. throughput: 65/min, with documentation.
used
Make Wafios / MRP / Vitari Various machines available! Diameter areas 2 - 45 mm
used
Several types available please contact us by email.
used
We can offer you all types of Wafios nail machines from S25 - N90
used
we can offer various wire pin presses, please ask for our list
used
We offer all types of Wafios wire pin presses from S25 - N90
used
Various machines available.
used
Wire staerke range: 2.0 - 6.0 mm sectional slats: max. 500 mm *suitable for round, profile and flat drainage*; ready for use
used
Wire range: a) up to 800 N/mm2 = 6.0 - 15.0 mm b) to 1200 N/mm2 = 6.0 - 12.0 mm c) to 1400 N/mm 2 = 6.0 - 11.0 mm section: up to 14,000 mm feed speed: 22 - 120 mtr./min * machine was partially overhauled and repainted*; very good
used
wire diameter range: 2,0 - 6,0 mm cutting length: up to 500 mm *suitable for Round- Profil- and Flatwire*; ready for operation
used
wire diameter range: a) up to 800 N/mm² = 6,0 - 15,0 mm b) up to 1200 N/mm² = 6,0 - 12,0 mm c) up to 1400 N/mm² = 6,0 - 11,0 mm cutting length: max. 14.000 mm wire feeding speed: 22 - 120 mtr./min. *machine is been partly reconditioned and new painted*; very good
used
Wire rod: 3.0 - 5.5 mm Nail length: 15 - 80 mm Capacity: 150/300 pcs/min -for steel rod; very good
used
wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good
used
Wire staerke range: 1.8 - 3.4 mm nail length: 13 - 80 mm power: 550 naegel/min *partially overtaken and repainted*; very good
used
wire diameter range: 1,8 - 3,4 mm nail length: 13 - 80 mm output: 550 nails/min. *partly refitted and new painted*; very good
used
Huelsen or rolls with width: 3.0 - 23 mm Band thickness: 0.7 - 1.5 mm Inner diameter: 3.5 - 7.5 mm capacity: 270 rpm; very good -as good as new
used
Bushes or rollers with strip width: 3,0 - 23 mm Strip thickness: 0,7 - 1,5 mm Internal bush diameter: 3,5 - 7,5 mm Output: 270/min.; very good -like new-
used
Machine was partially overhauled in 2014 wire diameter range: 4.0 - 10.0 mm section sections: max. 3,000 mm feed speed: 90/130 mtr./in; ready for immediate use
used
Working width: a) single-lane max. 2100 mm b) two-lane: 2 x 902 mm Number of laengsdrahte: max. 12 Wire distance: 6, 12, 18, 24, 30, 36 Wire wire spacing: 1/2 to 1/2 Wire staerke Laengsdraehte: max. 2.5 mm wirewirestaerke Kantdraehte: max. 3.0 mm Wire wirewire