UWM wp used machines

Power: 7,5 KW Receiver: 500 L weight of the machine ca.: 300 kg dimensions of the machine ca.: 1,7x 0,6 x 1,45 m feed pressure: 16 bar liter capacity: 870 l The UWM 10/870/500 K50 + Startbox is equipped with a K50 pump. Note that this is a high-pressure version (especially for trucks or places where higher pressure is required), Industry and hard work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The UWM 10/870/500 is available with 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power: 7,5 KW Receiver: 270 L weight of the machine ca.: 180 Kg dimensions of the machine ca.: 1700x600x1270 mm feed pressure: 10 bar liter capacity: 850 l/min connected load frequency: 400 V The UWM 7.5 / 850/270 K30 + start box with K30 pump, V-belt drive, is suitable ideal for use at home, in the workshop, in industry and for heavy work. The starting box is used to obtain a lower starting voltage (around to reduce peak voltages. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

feed pressure: 13 bar Effective free air delivery: 690 L/min Receiver capacity: 270l / 16bar l / bar weight of the machine ca.: 199 kg. motor: 400V / 5,5KW V / KW range L-W-H: 1,7 x 0,6 x 1,27 mm It is a high pressure version (especially for truck service or for heavy work). OPTION: The UWM 7.5/690/270 can be equipped with a starting unit (star-delta circuit). Surcharge: EUR 379 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Subj.: Offer about second-hand cut-to-length line Dear Mr Rajput, We have pleasure to provide you with an offer about second-hand cut-to-length line that is immediately for sale. Qty. 1 Second-hand cut-to-length line Mfc.: SACMA, UWM Built: 1994 Material: Stainless steel Strip Width: max. 2000 mm Thickness: 3.0 – 8.0 mm De-coiler Coil weight: 25,000 kg max. Leveller: 13 rolls, dia.: 130 mm Guillotine: start / stop type, manufactured by SACMA, Paper / cellophane feeder Stacker Run-out table Dimensions: 34 x 8 m Speed: 30 m/min

connected load frequency: 230 V output: 1,2 KW taper diameter: 19mm mm turning speeds: 1000 - 3000 U/min roll surface width: max. 100 mm roll length: max. 120 mm weight: 2,8 kg range L-W-H: 430 x 280 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 37 m/sec total power requirement: 3 kW weight of the machine ca.: 0,105 t dimensions of the machine ca.: 1,2 x 0,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 16 mm throat: 185 mm bore stroke: 50 mm : 20 mm spindle taper: MK 2 spindle diameter: mm spindle turning speed range: 100-1500 / 200-3000 U/min : 175 mm : 280 mm table surface area: 500 x 180 mm connected load frequency: 230 V total power requirement: 0,85 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,86 x 0,6 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 330 mm table load: 350 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 120 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 52 Kg dimensions of the machine ca.: 640 x 490 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 330 mm table load: 220 Kg swivelling range: 135 Grad tilt adjustment: manually/mechanicall: manuell turning speeds: max. 5 U/min stufenlos table load capacity: 100 kg. vertikal total power requirement: 0,125 kW weight of the machine ca.: 48 Kg dimensions of the machine ca.: 640 x 440 x 630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round material: 30 x 1 mm square material: 30 x 30 x 1 mm : 16 mm : 30 x 10 mm speeds: 9 U/min total power requirement: 1,1 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 330 mm bore stroke: 190 mm spindle taper MT: 4 MK table:: 500 x 400 mm column diameter: 140 mm turning speeds: 90 - 1500 U/min total power requirement: 2,2 kW weight of the machine ca.: 435 kg. range L-W-H: 570 x 930 x 2170 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 20 mm throat: 195 mm bore stroke: 80 mm boring spindle: MK 2 table surface area: 320 x 300 mm total power requirement: 0,75 kW weight of the machine ca.: 0,072 t dimensions of the machine ca.: 0,7 x 0,4 x 1,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: 110 Kg table load capacity: 55 kg. vertikal table diameter: 250 mm hollow spindle diameter: 65 mm chucking diameter: 200 mm swivelling range: 0 / 30 / 60 / 90 Grad turning speeds: 0 - 8 stufenlos U/min total power requirement: 0,15 KW weight of the machine ca.: 25 Kg dimensions of the machine ca.: 0,5 x 0,53 x 0,6 m Welding turntable with - large passage 60mm - Footswitch - tilt/swivel by hand - Speed infinitely adjustable - 250 amp welding current transmission - Bore in faceplate 60mm. Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 1/4 max. 2 Zoll wall strength: max. 3,0 mm engine: 400Volt / 1,5KW weight: 90 kg dimensions: 07 x 0,4 x 0,3 m Pipe notcher Maximum wall thickness 3.0 mm Suitable for the following pipes: 1/4, 1/2, 3/4, 1, 1 1/4, 1 1/2, 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 28 mm throat: 320 mm bore stroke: 150 mm spindle taper MT: 3 MK table:: 500 x 350 mm column diameter: 105 mm turning speeds: 75 - 3010 U/min total power requirement: 0,9 / 1,2 kW weight of the machine ca.: 235 kg. range L-W-H: 1740 x 670 x 850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 264 mm turning length: 1000 mm turning diameter in the gap: 550 mm turning speeds: 44 - 2000 U/min centre height: 200 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 1,5 / 2,4 kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1,9 x 0,8 x 1,56 m 3-axis digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 320mm bezel fixed running bezel 4-fold steel holder. Halogen machine light machine light foot brake removable chip tray, chip protection wall Hardened and ground bed tracks Complete coolant system lining protection machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 Kg workpiece diameter: 20 - 800 mm drum diameter: 200 x 50 mm feed: 80 - 1600 mm/min total power requirement: 0,23 kW dimensions of the machine ca.: 2 Stk. 0,45x,039x0,33 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 1000 kg : 190 mm connected load frequency: 380 V total power requirement: 0,75 kW weight of the machine ca.: 0,22 t dimensions of the machine ca.: 1,3 x 0,8 x 0,2 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1300 mm table width: 800 mm stroke height: 1010 mm weight max. in kg: 2000 kg : 190 mm connected load frequency: 400 V total power requirement: 0,75 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. weight of the machine ca.: 0,28 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 227 mm saw band length: 2455 mm table height: 840 mm cutting width: 260 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm capacity 90 degrees: round: 227 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 260 x 220 mm capacity 45 degrees: round: 150 mm capacity 45 degrees: square: 145 mm capacity 45 degrees: flat: 200 x 220 mm total power requirement: 1,5 kW weight of the machine ca.: 0,25 t dimensions of the machine ca.: 0,8 x 1,4 x 1,5 m Miter band saw - automatic cut - Base frame - Coolant pump - Chip brush for cleaning the saw band - Vise with quick adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 257 mm bore stroke: 115 mm boring spindle: MK 4 boring chuck: 16 mm bore depth: 120 mm table surface area: 475 x 425 mm column diameter: 92 mm total power requirement: 1,1 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table load: 500 Kg table load capacity: 250 kg. vertikal table diameter: 550 mm swivelling range: 135 (-45 - +90) Grad turning speeds: 0 - 5 stufenlos U/min connected load frequency: 230 V total power requirement: 0,8 KW weight of the machine ca.: 0,255 t dimensions of the machine ca.: 0,82 x 0,73 x 0,71 m Welding turntable with - large passage 165mm - Footswitch - tilt by motor - Speed infinitely adjustable - 250 amp welding current transmission Demonstration machine documentation only in English. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.