zimmer saws used for sale

Cutting diameter 220 mm Saw blade length: 2450 x 27 x 0.9 mm Colour: grey Total power requirement: 1.2 kW Saw band width: 0.9 mm Cutting speed: 35 + 70 m/min Cutting range at 90 degrees: around 220 mm Cutting range at 90 degrees: square 220 mm Cutting area at 90 degrees: flat 230 x 185 mm Cutting range at 60 degrees: square 90 x 90 mm Cutting range at 45 degrees: around 150 mm Cutting area at 45 degrees: square 150 x 210 mm Machine No. 4777230

width of the strips: 75 mm band length: 2000 mm band speed: 33 m/s weight of the machine ca.: 90 kg Power: 3 KW 400V / 50Hz Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 75 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 90 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 33 m/sec weight of the machine ca.: 105 kg engine output: 4 kW turning speeds: 2800 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 2000 mm band length: 75 mm band speed: 16,5/33 m/s turning speeds: 1400/2800 U/min weight of the machine ca.: 75 kg Volume: 83 dB The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding band dimension: 150 x 2000 mm band speed: 33 m/sek. total power requirement: 3 kW weight of the machine ca.: 95 kg turning speeds: 2800 U/min Standard equipment: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

band speed: 33 m/s grinding band dimension: 75 x 2000 mm total power requirement: 3 kW weight of the machine ca.: 75 kg turning speeds: 2800 U/min Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 16,5/33 m/sec total power requirement: 2,6/3,37 kW turning speeds: 1400/2800 U/min weight of the machine ca.: 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 150-2.500 UpM Power requirement: 16 A total power requirement: 1,5 kW Overall size: 750x450x1745 mm weight of the machine ca.: 187 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - right and left miter - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 23 thread capacity: M10 bore stroke: 90 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 150-1.250/350-3.000 UpM total power requirement: 0,75 kW Overall size: 735x470x1080 mm weight of the machine ca.: 106 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 16,5/33 m/sec engine output: 2,6/3,37 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 20 bore stroke: 80 mm Short spindle: MK2 throat: 180 mm Machine table - usable table surface: 285x285 mm table load: 45 kg spindle turning speed range: 210-2.500 UpM total power requirement: 0,38 kW Overall size: 620x470x1050 mm weight of the machine ca.: 80 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 140x140 mm capacity 90 degrees: flat: 150x140 mm : 100 mm : 90x90 mm : 100x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 65x65 mm capacity 60 degrees: flat: 65x70 mm dimensions of saw-band: 1735x13x0,65 mm cutting speed: 30-80 m/min engine output: 1,5 kW : 150 mm weight of the machine ca.: 37 kg dimensions of the machine ca.: 900x460x500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt width: 150 mm sanding belt length: 2000 mm band speed: 33 m/sec engine output: 3 kW Motor speed: 2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 25-138 m/min dimensions of saw-band: 1440x13x0,65 mm capacity 90 degrees: round: 150 mm capacity 90 degrees: square: 125 mm capacity 90 degrees: flat: 150x125 mm capacity 45 degrees: round: 75 mm capacity 45 degrees: square: 50 mm capacity 45 degrees: flat: 70x50 mm weight of the machine ca.: 35 kg Standard features: - Single-phase 1800 watt motor - Safety switch - Electronic rotary speed controller 25-138 m / min. with torque control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 20 - 85 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Motor output: 1,2 kW Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 230 V sawband speed: 30-75 m/min. : 230 mm total power requirement: 2,35 kW weight of the machine ca.: 200 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech  ...

grinding band dimension: 150 x 2000 mm band speed: 16,5/33 m/sec engine output: 3,4/4,5 kW Motor speed: 1400/2800 UpM weight of the machine ca.: 105 kg Domestic equipments: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: kW weight of the machine ca.: 0,35 t The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210x210 mm capacity 90 degrees: flat: 230x185 mm : 150 mm : 150x150 mm : 150x210 mm : 90 mm : 90x90 mm : 90x100 mm dimensions of saw-band: 2450x27x0,9 mm cutting speed: 35/70 m/min work height max.: 915 mm : 265 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 1550x870x1740 mm Zimmer Z241 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After cutting, the machine stops by a safety limit switch. The lowering is infinitely adjustable via a hydraulic system. Lifting the saw arm after cutting can be done in any position. The saw arm stops at the desired position. Standard features: - Hydraulic cylinder - emulsion pump - Eccentric tensioner - Underframe - saw blade - 400V plug 16A The data for this ad was created with ModulMWS - the software solution of LogoTec ...

Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 x 240 mm capacity 90 degrees: flat: 165 x 210 mm : 195 mm : 185 x 185 mm : 130 x 190 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 85 x 85 mm capacity 60 degrees: flat: 85 x 120 mm Motor output: 1,2 kW : 170 mm : 145 x 145 mm : 60 x 195 mm cutting speed: 36 + 72 m/min dimensions of saw-band: 2725 x 27 x 0,9 mm : 315 mm work height max.: 900 mm Weight: 330 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 2085x20x0,9 mm capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150x150 mm capacity 90 degrees: flat: 220x150 mm : 110 mm : 100x100 mm : 110x90 mm capacity 60 degrees: round: 70 mm capacity 60 degrees: square: 70x70 mm capacity 60 degrees: flat: 70x70 mm voltage: 400 V sawband speed: 35 + 70 m/min. : 230 mm total power requirement: 0,75 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280x550x1480 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTec ...

: 32 bore stroke: 125 mm Short spindle: MK 3 throat: 210 mm Machine table - usable table surface: 390x390 mm table load: 65 kg spindle turning speed range: 105-2.650 UpM total power requirement: 0,75 kW Overall size: 750x450x1745 mm weight of the machine ca.: 192 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 105 mm saw band length: 1140 x 13 x 0,65 mm cutting width: 100/100x105 mm capacity 60 degrees: round: mm capacity 45 degrees: flat: 55 x 55 mm capacity 45 degrees: round: 60 mm total power requirement: 0,18 kW weight of the machine ca.: 18 kg dimensions of the machine ca.: ca.400 x 300 x 350 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. Gear drive, automatic belt tension, electronically adjustable Belt speed from 20 to 100 m / min Due to the light aluminum housing, the machine is very light and therefore good mobile use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 185 mm saw band length: 2.080 x 20 x 0,90 mm cutting width: 100x185 mm connected load frequency: 230 V band speed: 35 und 70 stufenlos m/min mitre joint 90° (angle-iron till): 60 ° total power requirement: 2,35 KW weight of the machine ca.: 195 kg dimensions of the machine ca.: 1280 x 550 x 1480 mm We must ask you to request machines from us on a daily basis in the near future. Please notice: We would be happy to make you a free offer. However, please understand that we only process inquiries with complete address details. An inexpensive and powerful band saw for sporadic workshop use The Zimmer Z185 / R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stops due to a safety limit switch. The lowering is continuously adjustable via a hydraulic system. The manual lifting of the saw arm after the cut can - on any Position. The saw ...

: 400 x 32 mm capacity 90 degrees: round: 145 mm capacity 90 degrees: square: 130 x130 mm capacity 90 degrees: flat: 300 x 80 mm capacity 45 degrees: round: 105 mm capacity 45 degrees: square: 115 x 115 mm capacity 45 degrees: flat: 250 x 60 mm total power requirement: 1,8 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 800 x 1100 x 1400 mm Domestic equipments: - stepless, electronic speed control - Optional hydraulically controlled or manual belt arm lowering - Saw arm can be swiveled up to 60 ° right - quick release vice - Band guide with 8 ball bearings - Hydraulic saw blade clamping with clamping pressure display and strip break-off - Including coolant device - incl. machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 572 mm, 400 mm, 32 A

Die-sinking EDM machine x 350 mm y 250 mm z 315 mm Distance table - quill 550 mm Chuck 3R Macro Erosion Power Module EPO Fire extinguishing system Data Dielectric 250 liters extracted Length 1.75 m Width 2.10 m Height 2.53 m

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel size: 200 x 25 mm Shaft diameter: 20 mm turning speeds: 2.800 U/min saw band speed: 20 m/s total power requirement: 0,75 kW machine weight ab.: 17 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight: 145 kg engine output: 1,27/1,7 kW : 83 dB speed: 15/30 m/s : 150x 1750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5/33 m/s total power requirement: 2,6/3,37 kW weight: 190 kg Standard features: - vibration-free running smoothness - Working height adjustable - S1 motors with 100% duty cycle - Surface and contact grinding is possible - Removable protective cover for surface grinding - Connecting piece for double suction - Built to CE standard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sanding belt measurements: 150x2000 mm : 1400/2800 U/min band speed: 16,5 / 33 m/s total power requirement: 3,4/4,5 kW weight: 190 kg Maximum grinding of pipes is possible: at 90 degrees max. 150 mm Ø at 60 degrees max. 127 mm Ø at 45 degrees max. 100 mm Ø at 30 degrees max. 70 mm Ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An eroding island consisting of two die-sinking EDM machines and an automation system is available. 1) Zimmer & Kreim ZK Genius 700, year of manufacture: 2015, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator output: 96A, path eroding: CIMCO, operating hours: 22056h. 2) Zimmer & Kreim ZK Genius 700, year of manufacture: 2019, travel X/Y/Z: 400mm/350mm/350mm, table dimensions X/Y: 575mm/500mm, max. workpiece weight: 700kg, generator power: 96A, path eroding: CIMCO, operating hours: 8255h. 3) Automation Zimmer & Kreim Chameleon Quad, year of construction: 2015, electrode positions: 176, pallet positions with loading drawer: 9, double rotary gripper for Erowa ITS and single gripper for UPC pallets. Overall system dimensions X/Y: approx. 3000mm/6200mm. Including a Kraft & Bauer fire extinguishing system with suction device. Documenta ...

cutting diameter: 185 mm saw band length: 2.085 x 20 x 0,90 mm table height: 915 mm band speed: 35/70 m/min capacity 90 degrees: round: 185 mm capacity 90 degrees: square: 150 mm capacity 90 degrees: flat: 220 x 150 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 195 kg dimensions of the machine ca.: 550 x 1.280 x 1.740 mm mm Metal band saw with stepless electronic speed control and automatic lowering. • Selector switch for hydraulically controlled or manual band arm lowering • Saw arm can be swiveled up to 60 ° to the right • Quick-action vice • Belt guide with 8 ball bearings • Hydraulic saw band tension with tension pressure display and band break shutdown •Incl. Coolant system •Incl. Machine cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2450 x 27 x 0,9 mm table height: 915 mm band speed: 35 + 70 m/min connected load frequency: 400 V capacity 90 degrees: round: 220 mm capacity 90 degrees: square: 210 x 210 mm capacity 90 degrees: flat: 230 x 185 mm total power requirement: 1,2 kW weight of the machine ca.: 240 kg dimensions of the machine ca.: 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.  ...

dimensions of saw-band: 5.330 x 41 x 1,3 mm capacity 90 degrees: round: 460 mm capacity 90 degrees: square: 460 mm capacity 90 degrees: flat: 440 x 600 mm Cutting area at 45 degrees left: round: 445 mm : 410 mm Cutting area at 60 degrees left: round: 295 mm Cutting range at 60 degrees left: square: 295 mm table height: 890 mm cutting speed: 25 - 80 m/min total power requirement: 3,75 kW machine weight ab.: 1.500 kg dimensions: 2810 x 1135 x 1860 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Zimmer+Kreim Genius 700 Magic 3 was manufactured in 2009. It features a table with T-slots, dimensions of 575 x 500 mm, and a 24-position electrode changer. The machine can handle a maximum workpiece weight of 700 kg and offers a travel range of 400 x 350 x 350 mm. Consider the opportunity to buy this Zimmer+Kreim Genius 700 Magic 3 die-sinking EDM machine. Contact us for more information about this machine.

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg

Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Saegebaender Roentgen, new

Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

Cutting speeds: 40/80/min Mitre range: left up to 45° / right up to 60° The saw frame is brought to the starting position by hand. The lowering speed is controlled by a throttle valve (on the countersink cylinder) and as soon as the saw frame has reached the end position, the belt run switches off. You don't have to stand by the machine when sawing. The saw has an electric cooling water pump and a service has been carried out on the saw. The vice has a quick-release device Options: 1x saw blade 2720x27x0.9mm Number of teeth of your choice - from 5 saw blades 5% - from 10 saw blades 10% 5kg coolant concentrate 10kg coolant concentrate

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

Machine Type: Circular Saw Manufacturer: Kaltenbach Type: SKL 350 Year of construction:- Condition: used Offer will only be sent if a complete imprint is provided! Price 1.190 Euro incl. VAT Location Warstein , Germany Reference M-KAL-0724 DESCRIPTION We offer you a used circular saw from the manufacturer Kaltenbach. Technical data will follow. Availability: from 01.08 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg

Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting

Very high quality under-table double miter circular saw machine with manual saw blade feed – for cutting profiles and solid material made of aluminium – non-ferrous metal – plastics – wood and other soft materials Optionally available with roller conveyor and manual measuring stop with digital display. Largest saw blade diameter 620 mm Cutting Area - Examples - 90° - 130 mm x H 125 mm 90° - 80 mm x H 145 mm 45° - 100 x H 130 mm Infinitely variable miter adjustment +/- 20° Saw blade drive power 2.2 kW Dimensions approx. 0.9 x 1.2 m x H 1.6 m (with open protective cover) Weight approx. 350 kg

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Technical data: SEGA BIANCO MOD. 350 UNDOCUMENTED

Key data: 255 mm

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table "plateau" that rotates with the mitre of the saw blade, guaranteeing excellent support for the material t ...

Key data: 1 mm, 6300 mm

LHS Lagertechnik, supplier of shelving systems and general storage technology. Due to a customer's production closure, we are selling a KASTO HBA 420 band saw. In this ad, you will buy as follows: - 1 piece KASTO band saw HBA 420 - Year of construction: 1990 - Serial number: 17809 - Belt length: 6,300 mm - Band height: 41 mm - Band thickness: 1.3 mm -Conveyor - Connection voltage: 400 volts - Sale in as-is condition without guarantee and warranty - Loading with forklift, shipping and self-collection possible Sale in as-is condition without guarantee and warranty. Loading by forklift, shipping and self-collection possible.

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg

Key data: 280 mm

Ref.nr 00898 Name of the system: Used band saw Manufacturer: Bauer HS 280 GZA: For automatic sawing of small diameter ranges, universal application by the miter device, hydraulic material feed. Model HS 280 GZA Year of construction 2012 Technical data: (according to data sheet) Automatic saw design Cutting range 90° Round Diameter 280mm 90° Flat 300 x 230mm 45° Flat 220x230mm 30° Flat 130x170mm Cutting angle 0-30° Saw motor 1,100/1,400 Saw Blade 3000x27x0.9mm Belt speed 1: min 30m/min 2: max. 60m/min Coolant Pump 90W Hydraulic Pump 370W Mains connection 400V / 50-60 Hz Clamping force adjustment infinitely variable 10-40 bar Stroke length 500mm Working height / infeed height 500mm Dimensions (L x W x H) 1700 x 2100 x 1400mm Weight 1100 kg Scope of delivery / standard equipment Completely ready for connection, machine stand with chip collectio ...

Band length: min. 3200mm, max. 3400mm With welding machine

Table saw

Circular saw Manufacturer: MEP Type: Tiger 350

Description: FRIGGI Band Saw 2MF650 ACN Details: Type 2MF650 ACN Serial number 2511 Year of construction 1997

For sale is a Heska ESU 9 vertical band saw, ideal for precise sawing work in metal, wood or plastic processing. The machine is characterized by a large working area, high stability and robust construction. Perfectly suited for workshops, training companies and industrial applications. Technical data: Blade length (max.): 4550 mm Blade length (min.): 4400 mm Total height: approx. 2000 mm Width (machine body): approx. 900 mm Depth (incl. table): approx. 1700 mm Saw table: Table size: approx. 600 × 660 mm Table extension right: +500 mm Dimensions: Length: 900 mm Width: 1700 mm Height: 2000 mm Condition: Used, functional Further technical details on request Delivery / Pick-up: Loading onto trucks possible Transportation can be organized on request