johannsen grinding machines wood used for sale

Technical data (subject to change) Space requirement 4,200 x 2,600 mm Tape measure 7,800 x 150 mm Table size 2,900 x 1,400 mm usable working length between the uprights max. 2700 mm Table lift by means of handwheel 340 mm Offset right 1100 mm Weight approx. 1300 kg (Compressed air connection required)

Power connection 380V 7.3kW Extraction 1x120 mm 1x180 mm Grinding table 2850 x 1550 mm Sanding belt dimensions 7820 x 150 mm Table height adjustment via handwheel LxDxH: 4400 x 1700 x 1450 mm Weight approx. 1100 kg

Machine Table size approx. 2500 mm x 980 mm

gebr. Long belt grinding machine JOHANNSEN T84 ST YOC 1990 Total connected load: 4.5 kW / 10.3 A Motor power: 3.8 / 4.5 kW 2 belt speeds (13.5 + 27 m/s) Table size: 270 x 80 cm electr. Table lift Belt dimensions: 150 x 7,100 mm Offset (both sides): 450x220 mm 2 sanding shoes Switch for clockwise/counterclockwise rotation Integrated lighting Extraction connection: 140 + 120 mm incl. various sandpapers Machine dimensions (approx. dimensions) W:400 cm D: 131 cm H: 141 cm Weight: approx. 700 kg The machine comes from a 1-man operation.

Long belt sanding machine Johannsen Type T8E Machine No. 14185 Built in 1979 Sanding belt dimensions 7100 mm x 150 mm Table size 2500 mm x 950 mm Upper sanding belt cover Motor power 4 kW Sanding belt 2 speeds left and right rotation Clearance under belt maximum 470 mm Right offset 300 mm Extraction connection diameter 160 mm Dimensions 3750 mm x 1350 mm x H 1400 mm Weight approx. 850 kg

Used machine Grinding height 340 mm Belt speed 22 m/s Table width 1,400 mm Table length 2850 mm Sanding belt length 7,800 mm Sliding range 950 mm Weight approx. 1200 kg

gebr. Long belt grinding machine JOHANNSEN T96 YOC 1994 Total connected load: 5.7 kW / Rated current: 12.5 A Motor power: 4.0 / 5.5 kW 2 belt speeds Table size: 278 x 95 cm electr. Table lift Belt dimensions: 150 x 7,800 mm Maximum usable sanding belt length: 260 cm Large offset (right): 1,000 x 310 mm Left offset: 550 x 310 mm Pneumatic grinding unit (pneumatic pressure) incl. 2 sanding shoes: 300 + 450 mm (incl. suction device) Suction arm for vacuuming the sanding shoe Vacuum suction clamping device (pneum. workpiece clamping) with 8 suction cups incl. vacuum pump Turntable (stroke pneumatic) Sanding board with stop Selector switch for clockwise/counterclockwise rotation Suction nozzle right + left + sanding shoe (120 + 140 + 80 mm) Dimensions: 255 x 430 cm Weight: 900 kg Machine dimensions (approx. dimensions) W: 430 cm D: 162 cm H: 153 cm

Band width: 150mm; Band length: mm; Table size: approx. 2600mm x 1000mm; Suction connection: Motor power: 3kW; Machine length: Machine width: Weight: 900kg;

from training workshop - public institution used, top condition, little used make Johannsen type T 94 year of manufacture 1996 machine no.No. 21397 GS wood dust tested sanding length approx. 2600 mm sanding width approx. 850 mm belt length approx. 7800 mm x 150 mm cranking right approx. 550 mm electric adjustment upper belt cover upper sanding support belt speeds 22 m/sec. right-left run suction connection D 180 mm left space requirement approx. 2200 mm x 4050 mm weight approx. 700 kg storage location 97447 Gerolzhofen, free loaded, unpacked delivery as seen, without guarantee and warranty

Manufacturer: Johannsen, Type: Langbandschleifer, Year: 1992, Table width mm: 800, Table length: 2799, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 350, 2 rotary directions: yes, Exhaust diameter mm: 140, Hight adjustment by engine: yes, Year :1992

Manufacturer: Johannsen, Type: T 94, Year: 1993, Sanding hight mm: 350, Table width mm: 800, Table length: 2700, Hight adjustment by engine: yes, Sanding belt engine kW: 4, 2 rotary directions: yes, Exhaust diameter mm: 120, Hight adjustment by engine: yes, Year :1993

Manufacturer: Johannsen, Type: T 86, Year: 1991, Sanding hight mm: 350, Table width mm: 1200, Table length: 2800, Hight adjustment by engine: yes, Sanding belt engine kW: 4, Travel range table mm: 300, 2 rotary directions: yes, Exhaust diameter mm: 130, Hight adjustment by engine: yes, Year :1991

Manufacturer: Johannsen, Type: LN 160 M, Belt length mm: ca.6500, Sanding hight mm: 400, Table width mm: 1200, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: 5,2/5,7, Travel range table mm: ca.1000, 2 rotary directions: yes, Stop straightedge: yes,

Manufacturer: Johannsen, Type: T 92, Year: 1985, Sanding hight mm: 240, Table width mm: 800, Table length: 2600, Manual hight adjustment: yes, Sanding belt engine kW: ca.3, Travel range table mm: 800, Exhaust diameter mm: 180, Year :1985

grinding length: ca. 2.600 mm grinding width: ca. 850 mm working heigth: ca. 340 mm engine: 4 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: ca. 2.780 mm Working width: ca. 950 mm Motor output: 6 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CATALOG NO. 6875 TECHNICAL DATA - inlet width 720mm - inlet height 160mm - thickness of the shredded material 160mm - roller width 720mm - shaft diameter 600mm - knife length 80mm - number of knives 4×12pcs - 25mm sieve dimensions - pressing roller at the input 0.75 kW - toothed shaft pulling from the bottom 1.8 kW - toothed shaft pulling from above 1.8 kW - length of the vibrochute 4470mm - width of vibrochute 710mm - 2.2 kW vibrating motor - main engine 55kW - autoreverse - diameter of the extraction spigot 260mm - dimensions of the vibro-chute length/width/height 4470/950/930mm - machine dimensions length/width/height 3100/1500/1170mm - total weight about 5500 kg – German production - very low mileage – original documentation – used chipper, very good / perfect condition Net price: PLN 169900 Net price: 36538EUR Net price calculated according t ...

Chipper / Shredder WEISS CR40/324MM CATALOG NO. 6907 TECHNICAL DATA - inlet of the loading hopper at the top 1980x1050mm - inlet of the loading hopper at the bottom 980x1050mm - outlet for chipped wood fi 210mm - working width of the rotor 980mm - main engine 30kW - pump motor 1.1 kW - number of knives 36 pcs - knife size 40x40mm - 18mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 2100x2030x2070mm - weight about 3500 kg - French production – like WEIMA WL 10 - New knives installed – autoreverse – pressure drawer - very good condition – used chipper Net price: PLN 108900 Net price: 23419EUR Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

CATALOGUE NO. 6943 TECHNICAL SPECIFICATIONS - loading hopper inlet 1600x1500mm - rotor working width 1500mm - main engine 45kW - pump motor 5,5kW - number of knives 44pcs - knife size 50x50mm - sieve 59mm - pressure drawer - autorewers - dimensions length / width / height 3430x2800x2850mm - weight about 9000kg ADVANTAGES – French production - new knives put on – autorewers – pressure drawer – very good condition – used chipper Net price: 189900 PLN Net price: 42200 EUR Net price calculated according to the exchange rate of 4,5 PLN/EUR (with larger fluctuations in the exchange rate, the price may change)

Hackeranlage Rudnick Enners 650/200 Motor 37kw vibrorinen Metaldetector kratzforder Containerbefillen

20-75- CNC with tool changer WOODLAND MACHINERY (new) Type SX1325A-12 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 9.0kw 24000 rpm. Servo motor Control system LNC Drive gear High precision automatic positioning cylinder Work table vacuum plate Vacuum pump 7.5 kw Maximum speed 60 m/min Maximum working speed 15-20m/min Flexible towing cable (with screen) Air components BLCH Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 3100 kg The price is 24500 Eur

Wood Chipper, Wood shredder 18 KW Opening 600 x 800mm

Type Record 121 Number of working axes 3+ Useful working area axis X-Y-Z 2600-1080-250 mm Table dimensions 2600 x 1080mm Spindle speed 900 - 18000 rpm Number of milling spindles: 1 Tool change positions: 12 Tool clamping system HSK63F Work table Matrix table The main engine is 7.5 kw Vacuum pump performance 250/300 m3/h Vacuum motor 6.5 kw The diameter of the extraction socket is 150 mm Air pressure 7 bar Voltage 380V/50HZ Transport dimensions 3700x3200x2600mm Weight 3500 kg The price is 15500 Eur

Horizontal chipper Horacle / machine no.: H2156/62HO - Feed width: 620mm - Max. feed height: 140mm - Vibrating trough length: 5m - Power: 28 kW - Rated voltage: 400V - Rated current: 55A - Control voltage: 230V - Fuse : 63A - Frequency: 50Hz

A CMS CNC woodworking center is available. Axes: 5, travel X/Y/Z: 3500mm/2200mm/300mm, spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, tool places: 20, table type: matrix vacuum table, control: Osai S10. The system control was modernized in 2006. Documentation available. On-site inspection is possible.

DMC 3-belt calibrating sander mod. USK1350 M3 - CE standard - 1 steel roller - 2 rubber rollers - 3 rubber rollers - N. 3 independent motors - Working width 1350mm - With shoes (short pieces device) - Blower on the third group - On/off device on each group - Touch screen control - Matr. SA/005006 - Year 2004 - CE compliant

900 mm sanding machine for turned products. GENINI mod. LAR90 - Maximum working length 900 mm. - Automatic loader

COMEVA horizontal belt sander mod. LC180

CAMAM longitudinal sander mod. LOL/75/RU

CNT orbital sander mod. LOR 150 - CE compliant - Matr. 17002 -Diam. Min. max. machinable 10-45 mm.ù - Hp3 engine - Year 2017

CAMAM orbital sander mod. LEC250 – CE compliant - With feeds - Matr. 11 - Year 1996 - Working dimensions min/max. 30/150 mm. - Min. radius of curvature mm. 250

A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensio ...

Hundegger K2i 625 well-maintained year of manufacture end of 2008 fully automatic carpentry machine, feed and loading cross conveyor, under-table swivel cross-cut saw 11 kw, universal milling unit - 5 axis, combined support for vertically working tools, drilling rig 2.2 kw, drilling rig swivel 2.2 kw, marking device, fully automatic beam turning station hydraulic design, transport and position setup two-hand system, electronic control, 6-arm storage table, AQF strand with shaft extension, Extension bracket with puller, zero stop for pre-elongated components, scrap wood holder on the K2 i in front of the sawing unit, splinter wood for horizontal drilling unit, vertical finger cutter 5.5 kw, longitudinal and transverse groove cutter, slitting device on both sides guide 900mm, marking device at the rear, marking and labeling device at the bottom, refined wood support surfaces, additional sc ...

Orbital sander CAMAM mod. LEC200/AV - With feeding units - Min/max diam. 10/100mm - Motor 5.5hp - Volt. 380v/50hz

A CNC dual spindle woodworking machining system Homag is available. Travel speed: 35m/80m/25m/min, C-axis: 360°, A-axis: +/-100°, Z stroke: 600mm. Workpiece length range: 2450mm/17400mm, max. workpiece width: 1900mm, max. workpiece thickness (incl. clamping devices): 300mm. Main spindle power: 15kW, speed: 24000rpm, tool holder: HSK-F63, saw blade diameter: 350mm. Second spindle power: 18.5kW, speed: 24000rpm, tool holder: HSK-F63. Tool positions: 18/2x10. Total system dimensions X/Y: approx. 19000mm/6300mm, control: Homag. Including underfloor milling unit Homag, 3xtool changers, pickup position, clamping platforms, vacuum clamps, workpiece lifter, laser and additional units. Documentation available. An on site inspection is possible.

ZENO Zerkleinerungsmaschinenbau Norken GmbH ZTLL 1000x1200 Waste shredder in use until 03/2026 in good used condition Masch. No. 98A-4689 Standard version, screen hole 20mm Low-speed with moving floor Main drive 18.5 kW, hydraulics 0.75 kW 400/690 V, total rated current 36A Fuse 63A Conductor cross-section 4x16 square Weight 1950 kg, 20 cutting edges Rotor speed 140 rpm Rotor diameter 300 mm Extraction diameter 250 mm Exhaust air speed 30 m/s Inlet cross-section L 1000mm W 800mm External magnetic separator Spare blade

Untha LR 700 Machine is like new, was not used, has only 1 hour of operation. For sale is a UNTHA LR 700, a robust and powerful single-shaft shredder for wood waste, chipboard, MDF and production residues. The machine impresses with its compact design, high efficiency and reliable continuous operation – ideal for carpentry, wood processing and recycling. Technical data: • Drive power: 18.5 kW • Rotor length: approx. 700 mm • Rotor diameter: approx. 250 mm • Hydraulic Gate Valve 2 • Weight: approx. 1,500 kg • Proven UNTHA cutting system The LR 700 is known for its durability, low-maintenance technology and uniform shredding results. Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfact ...

Motor 18.5KW Rotor length 600mm Hydraulic Moving Floor Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfaction of our customers is our top priority. You are welcome to visit and test the machines in advance so that you can personally convince yourself of their flawless function and quality. In addition, delivery can be organized by us on request. For further information or questions, please do not hesitate to contact us at any time by phone or message.

Wood Turning Lathe Precision device for professional users, with grey cast iron variable speed control high degree of spindle concentricity Spindle can be fixed all 15° LCD speedometer One hand operation of the tailstock and tool rest with quick-release mechanism Voltage: 230V / 50 Hz Engine power: 735W (S1 100%) Tip height: 160 mm Top width: 510 mm Speed ranges: 250-750 m-1, 550-1650 min-1, 1300-3850 min-1 Spindle stock rotation: 180 degrees Headstock thread: M33 DIN800 Morsekonusaufnahme: MK2 / MT2 Quill stroke: 63 mm Weight: 52 kg Dimensions: 1035 x 305 x 449 mm G & HM-D510F

Wood Turning Lathe big turning diameter over bed allows the turning of workpieces with large diameter - ideal for turning E.g. plate user friendly adjustable speed Digital speed display comfortable working with hand pad and quick adjustment Spindle/tailstock bore 10 mm Top width: 457 mm Tip height over machine bed: 153 mm 3-stage variable spindle speed: 650-1450 min-1, 1250-2800 min-1, 1600-3800 min-1 Headstock, thread: M33 DIN800 Motor power S1 (100%) / S6: 550W / 770W Mains voltage: 230V Net weight: 33kg G & HM-D460FXL

PIN cutting machine Clamping width of 240 mm beam height of 320 mm spigot strengths of Max 130 mm PIN length of 350 mm motor power 2,2 kW 380 Volt motor weight approx. 120 kg

Specifications / Technical data S-1000/T Portalfraesmaschine / Engraving machine With the T-variant of the High-Z CNC-Fraese you acquire old-fashioned technology with the certain i-tuepfelchen in TUeV-certified quality (Emc). The High-Z/T Fraese is designed for even more accuracy (repeatability about 0.01mm ) and especially for higher travel speeds. Through the ball-circuit spindles used, the High-Z/T achieves fantastic accuracy and an almost unmeasurable reverse play of about 0.01mm. At the same time, high travel speeds of up to approx. 108mm / second ( 6500 mm / minute ) can be achieved. This is how engraving and fraes speeds of up to approx. 4500mm/min can be realized and urgent journeys up to approx. 7000mm/min. Here you can see a video about empty runs with the new high-Z/T 3D CNC machine. This makes this machine series in the industrial sector just as applicable for work ...

Important and outstanding design features of the RaptorX-SL with steel substructure / RaptorX-SL2200/S20 The application variety of a RaptorX-SL CNC Fraes machine is variable due to the adjustable working area (read-through shoe under bridge: 150mm, 300mm or 400mm ) and the travel height of 300mm in the Z-axis (at no extra charge) extremely large. special groesmes up to 17,500 mm (at one scale ) x 3000 mm x 600 mm are possible ! If you are interested, please ask ! So you are able to process plate materials with the greatest stability of the Z-axis just as precisely as 200mm high 3D-plates. Use the system as a plasma cutting system or waterjet cutting system, corresponding extensions are available. In the middle range of the machine (between the footpipes ) you can even process parts up to a height of 850mm (beam shroughl, etc. ) or 3D body up to about 400mm height (at 400mm ...

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, dr ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial ...

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno-point sensors / reference switches / limit switches on all axes Double-secured emergency trigger energy chains for clean cable Total mass with motors : LxWxH approx. 2180 x 1800 x 1420 mm Fra- Sc ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

Bos Machine (BMH) with a Sapiens Wood bosmachines We are a producer of frames, windows and doors and we sell the machine ourselves. The machine has been running in our factory from 2006 to 2022 (16 years). This is a Bos Machine (BMH) with a Sapiens in front of it. The Sapiens is a CNC machine with one robot head and one regular axis. He then proceeds to the tenoning bench (for the crosscut processing). The first shaft is a saw followed by 3 vertical shafts (approx. 500mm long) and behind them two more motors for round edges on the wood. Then he moves on to the milling. The first cutters profile the edge finish and the second cutters profile the inner profile. The first milling cutters consist of 1 milling cutter which profiles and immediately makes the wood thickness, followed by 4 milling motors and then another 5 milling motors for profiling the inner profiling. Technical status: ...

Used creel, type I75/55 -outdated- Stock number: aga902 Passage: 750 mm Stroke: 550 mm Constructive structure: - Reinforced centre stand made of steel, stress-free cold formed - No cross beam on the incision side thanks to special Stand construction; thus easier saw attachment - Frame beams made of special steel, milled from a single piece - Profile stilts with rolling and cylindrical roller bearings and honing sleeves - Incl. clamp and stop Auto-BV Programmable cutting width adjustment with - Asymmetrical adjustment of the two saw packages (with type 71 with 4 saws, with type 75 with 5 saws per package), with synchronous adjustment of the splitting wedge knives - Control box with PLC control - Pushbutton box with TP operating terminal for convenient program input - Editing program display

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 126015788 TT 301-2 802F E23 -Outer milling cutter: Ø 185 mm -Height: 26 mm -Hole: Ø 40 mm -Bolt circle: Ø 58 x 7 mm -Weight: 1.6 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Manufacturer: Leitz, milling head -Type: Dufix, 044927 TT 321-2 302R 171.6-905 E23 -Outer milling cutter: Ø 172 mm -Height: 30 mm -Hole: Ø 40 mm -Bolt circle: Ø 60 x 8 mm -Weight: 1.7 kg

Type Overture ES Voltage 230 V (50 Hz) Made in USA Transport dimensions 600x400x500 mm Weight 15 kg

Laser sensor Error detection automatically Shape recognition Laser printer (DIN A4) Number 2 Monochrome cameras PHOTONFOCUS 160 MB Number 2 Barriers + Accessories

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: Ø 150 mm -Height: 20 mm -Hole: Ø 30 mm -Quantity: 1 milling cutter -Dimensions: 150/150/H20 mm -Weight: 2.2 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 138 mm -Height: 25 mm -Socket: Ø 30 mm -Number: 1 cutter -Screwed saw blade: 140 x 4 mm -Price: complete -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 125 mm -Height: 30 mm -Socket: Ø 30 mm -Number: 1 cutter -Price: complete -Weight: 2.2 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outer: Ø 192 mm -Height: 55 mm -Number: 4x recordings available -Price: per piece -Weight: 9.4 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -External milling cutter: Ø 180 mm -Height: 14 mm -Socket: Ø 35 mm -Radius -1x: right -1x: left -Price: complete -Weight: 9.1 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 302 mm -Height: 12 mm adjustable -Disk milling cutter -Socket: Ø 60 mm -Number: 2x milling cutters available -Price: per piece -Weight: 14.8 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Disk milling cutter -Socket: Ø 60 mm -Number: 3x milling cutters available -Price: per piece -Weight: 12.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 80 mm -Height: 20 mm -R angle -Support: Ø mm -Number: 2x milling cutters available -Price: per piece -Weight: 0.5 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 160 mm -Height: 45 mm -Radius -Support: Ø mm -Weight: 5.6 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 180 mm -Height: 35 mm -Radius: 25 mm -Socket: Ø 30 mm -Weight: 5.8 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer dimensions: Ø 180x40x35 mm -Cutter: 1 -Price/Sale: complete -Weight: 6 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO -Type: Ø 212x40x60 20° -Outer: Ø 212 mm -Angle: 20° -Socket: Ø 60 mm -Hole circle: 100 mm -Number: 2x milling cutters available -Price: per piece -Weight: 8 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -AKE wood router bit with: AKE Hydro-Grip -Outer diameter: 165 mm -Height: 60 mm -Hole: Ø 40 mm -Cutter: 1 -Price/Sale: complete -Weight: 8 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: with ETP Hydro-Grip -Outer: Ø 180 mm -Height: 46 mm -Socket: Ø 40 mm -Number: 2x milling cutters available -Price: per piece -Weight: 10 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Outer: Ø 300 mm -Height: 12 mm -Socket: Ø 60 mm -Number: 1 cutter -Price: complete -Weight: 5.5 kg

Hydraulic gripper for wooden beams with modular suction cups Load capacity kg: 700 Number of suction cups: 16 Dimensions of suction plate mm: 80 x 750 Procedure mm: 8000

wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: Ø 160 mm -Hole: Ø 60 mm, bolt circle Ø 85 x 9 mm -Number: 2x cutters available -Price: per piece -Dimensions: Ø 160 x 40 mm -Weight: 3.6 kg/piece

Wood band saw, band saw machine, band saw, vertical band saw, metal band saw -Manufacturer: PEHAKA Petzing

Wood step drill bits, wood drill bits, countersink bits, end mills, drill chucks, click-type quick-change chucks -for: row drilling machine, hardware drilling machine -from: a woodworking shop -15 kg: Milling cutters, drill bits, countersinks, click-type quick-change chucks

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 220 mm -Number: 2 milling cutters Price: complete -Weight: 14 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 12 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 200 mm -Number: 2 milling cutters Price: complete -Weight: 11 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 150 mm -Number: 2 milling cutters Price: complete -Weight: 11 kg

Hydraulic wood splitter, functional Details on request

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 4.5 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 200 mm -Number: 5 milling cutters -2x: left -3x: right Price: complete -Weight: 6 kg/piece

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 170 mm -Number: 9 milling cutters -4x: left -5x: right Price: complete -Weight: 3.8 kg/piece

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 170 mm -Number: 6 milling cutters -2x: left -4x: right -Price: complete -Weight: 4.6 kg/piece

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 23 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 210 mm top -Outer diameter: 220 mm below -Quantity: 2 sets of milling cutters Price: complete -Weight: 16 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 0 mm -Number: 2 milling cutters Price: complete -Weight: 10 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 195 mm -Quantity: 1 milling cutter Price: complete -Weight: 5 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 192 mm -Quantity: 1 milling cutter Price: complete -Weight: 5 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 195 mm -Quantity: 1 milling cutter Price: complete -Weight: 2 kg

Wood router bit, router head, router tool, wood router bit, profile router bit -Outer diameter: 180 mm -Number: 2 milling cutters Price: complete -Weight: 7 kg