behringer saws used for sale

Inv. Num. : 7318 Type: PSU 450 Producer: Behringer Created: 2006 Parameters: Wheel diameter: 450 mm Weight: 1150 kg Equipment: 4x Spare Disc

Manufacturer: Behringer Model: HBP 420-723 G Year of Manufacture: 2004 Operating hours : approx. 15,800 hours Including powered roller conveyor Silberland B 660 / 15 m (built in 2010) Rated Voltage: 400 V Frequency: 50 Hz Rated Current: 20 A Control Voltage: 24 V DC Technical Data Working Range: - Round at 90°: Ø 420 mm - Flat at 90°: 720 × 420 mm - Flat at 75° left: 710 × 420 mm - Flat at 60° left: 650 × 420 mm - Flat at 45° left: 550 × 420 mm - Flat at 30° left: 350 × 420 mm - Flat at 60° right: 650 × 420 mm - Flat at 45° right: 460 × 420 mm Smallest Cut-off Length (90°): - Manual: 10 mm Cutting Speed: - 17 – 120 m/min (stepless adjustment) Saw Blade Dimensions: - 6300 × 41 × 1.3 mm Band Tension (hydraulic): - 950–1200 N/mm² Motors: - Saw Drive Motor: 5.5 kW - Hydraulic Motor: 1.5 kW - Coolant Pump: 0.12 kW - Chip Conveyor: 0.5 kW Electrica ...

Manufacturer: BEHRINGER Model: HBP 410-723 G Year of Manufacture: 2014 Operating time: approx. 5,900 hours With automatic supply and removal Electrical Data: - Rated Voltage: 400 V - Frequency: 50 Hz - Rated Current: 36 A - Control Voltage: 24 V DC Saw Band Dimensions: - 6,300 x 41 x 1.3 mm Technical Data: - Working Range Ø / flat at 90°: 410 mm / 700 x 400 mm - Working Range Ø / flat at 75° left: 410 mm / 660 x 400 mm - Working Range Ø / flat at 60° left: 410 mm / 580 x 400 mm - Working Range Ø / flat at 45° left: 410 mm / 450 x 400 mm - Working Range Ø / flat at 30° left: 300 mm / 300 x 300 mm - Working Range Ø / flat at 75° right: 410 mm / 660 x 400 mm - Working Range Ø / flat at 60° right: 410 mm / 580 x 400 mm - Working Range Ø / flat at 45° right: 380 mm / 450 x 380 mm Minimum Residual Piece Length: 45 mm Cutting Speed: 20 – 140 m/min Feed Pressure (B ...

Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Key data: 400 mm

Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

saw blade diameter: 450 mm cutting diameter: 150 mm stroke: 1300 mm Control: cutting range: 140x140 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany

Behringer-KS-400-HY-01[printfriendly] X Attention –––Promotions! X Some prices are available until X 31.10.2015 reduced by 20% Hydr. Hacksaw Behringer KS 400 HY Make: Behringer Type: KS 400 HY Masch.-Nr.: 688286 Year of manufacture: 1998 / 2015 tüp. Comm. No.: 3990600/009 Special fixed price: 5.940,- € | now 4.752,- € Specifications Sawing range up to: Ø 400 mm, 350 x 350 mm, 380 x 300 mm Saw blade dimensions: 650 x 50 x 2.5 mm 3 lifting speeds: 40 / 62 / 90 strokes/min. Drive power: 3.0 kW Weight: approx. 820 kg Footprint: W 1.80 x D 0.65 x H 1.25 m Machine color: off-white/red Equipment 3 lifting speeds Stepless cutting pressure adjustment Prestressed plate guide of the saw bracket Dust-tight closed gearbox Accelerated return stroke of the saw bracket Closed Oil Hydraulic System Coolant Setup Limit stop switch Automa ...

1. Gebr. Automatic band saw, Fabr. Behringer, Type HBP303A / CNC-AFC, YOC 1994 - CNC control for fully automatic workflow - Cutting range at 90° around 300 mm - flat 300 x 300 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Residual piece length automatic operation / manual approx. 90 / 40 mm - Saw blade dimensions 4640 x 41 x 1.3 mm - Cutting speed infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 7.0 kW - Weight approx. 2500 kg -Operating instructions

Tensioning device for automatic band saw, saw band rollers, saw band guide -Holder, from Behringer HBP automatic band saw -Bore: Ø 80 mm -Dimensions: 380/140/H50 mm -Weight: 8.2 kg

Clamping device for automatic band saw, hydraulic double vice, saw unit mounting, feed, material positioning -Upport saw unit: from automatic band saw Behringer HBP 360 A -Stroke: 675 mm -Shaft: Ø 40 mm -Measurements: see photos -Dimensions: 720/1545/H220 mm -Weight: 236 kg

cutting diameter: 215 mm band length: 400 mm stroke: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Burn-Drilling Rig Panel Processing Center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC Control Power source Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Auto. Revolver Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x400 mm with restriction ) Minimum dimensions of finished parts: 80 x 80 mm Sheet weight max.: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-position cross conveyor Number of cars: 2 pliers NC feed carriage, placed on the side 4 collets (2+2) 3 Short Stroke Cross Conveyors Working height: 1,000 mm Removal page: Discharge roller conveyor with lowerable unloading table with chute in Material c ...

Material feed in any length (max. stroke 610 mm) Cutting diameter: round 510 mm, flat 500 x 500 mm Cutting speed adjustable via controller: 25 - 235 m/min Conveyor Operating instructions, circuit diagrams and spare parts lists available Just under 5,000 sawing hours For more technical data, see photo or on request Machine weight: approx. 3 t

Behringer HBP 320 Depth of throat: 320 mm Sawspeed: 16 > 100 m/min Length of band saw: 4860 x 32 x 1,1 mm Power needed: 3 kW Length : 2500 mm Depth : 2400 mm Height: 1600 mm Weight: 2400 kg

Behringer HBP 400 Depth of throat: 400 mm Max height of workpiece: 400 mm Length of band saw: 5800 x 38 x 1,3 mm Power needed: 5 kW Length : 2900 mm Depth : 2500 mm Height: 2100 mm Weight: 2,7 ton

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

Machine Details Stock-No. 1105-04064 Type of machine Band Saw - Automatic - Horizontal Make BEHRINGER Type SLB 240 A Year of manufacture 2016 Type of control conventional Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free loaded truck, ex stock HAGUENAU Technical details cutting diameter 260 mm saw band length 4100 x 32 x 1.1 mm cutting width 260 mm feed length 600 mm range L-W-H 2.5 x 2.2 x 1.6 m Weight of the machine approx. 2.2 t Additional information automatic band saw Chip Conveyor hydraulic pump good working condition

cap round: dia 260 mm cap square: 260 x 260 mm Depth of throat: 260 mm Max height of workpiece: 260 mm Sawspeed: 17 > 120 m/min Length of band saw: 4100 x 32 x 1,1 mm Power needed: 5 kW Length : 2300 mm Depth : 2300 mm Height: 1400 mm Weight: 2 ton

cutting diameter: 200 - 280 mm band length: 400 - 500 mm stroke: - mm total power requirement: 2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 3 LM m Package 5 x hacksaw / hacksaw machine / untested - partly in need of repair / spare parts carrier - 0278: RUCOCO RBS 280 A / Ø 280mm - automatic machine - 0664: SILISTRA HN 25 M / Ø 250 mm / saw blade 500 mm - 2395: BEHRINGER Super A-275 / Ø 275 / saw blade 450 mm / automatic machine - 3674: BEHRINGER Super 215 PU 2 / Ø 215 / saw blade 400 mm - 5708: KLAEGER / Ø approx. 210 / saw blade 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting speed: 60-100 m/min engine output: 7,5 kW weight: 8800 kg Horizontal bandsaw manufacturer: Behringer, Horizontal bandsaw Automatic bandsaw type HBP 430 Metal bandsaw, Band saw machine, bandsaw, Vertical bandsaw, Horizontal bandsaw, hydr. horizontal bandsaw machine, Semi autom, Band saw machine, Chip conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Qty. 1 Second-hand lathe CNC machine Manufacturer: VERNET BEHRINGER Machine type: FG 2005 CNC Definition: Sheet metal drilling line Year of construction: 2012 Voltage supply: 380 V, 3 ph., 50 Hz, Ground Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar Oil volume: ≈120 liters Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm & 1340 x 1000 x 60 mm

A horizontal double-column bandsaw Behringer is available. Cutting range round material: 340mm, cutting range square material: 340mm/340mm, cutting speed: 120m/min, saw band dimensions X/Y/Z: 4860mm/32mm/1.1mm, machine dimensions X/Y/Z: approx. 3250mm/2600mm/1650mm, weight: approx. 2500kg. An on-site inspection is possible.

cutting diameter: 650 mm saw band length: . mm cutting width: 1000 mm Cutting height: 650 mm weight of the machine ca.: 6,4 t dimensions of the machine ca.: m Cutting speeds: 16–170 m/min Working area: approximately 670 mm Material support height: 700 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution  ...

Behringer HBM 540 A Automatic Band Saw Year of manufacture 2005 Flat working area 630x540 Round 540mm Motor power saw drive 11KW Cutting speed 20-200m/min Feed roller conveyor driven 8750mm Width 1100mm Discharge roller conveyor not driven 5020mm width 910 Conveyor The offer is aimed exclusively at tradespeople within the meaning of §14 BGB no sale to private individuals

Offer 25286 Specifications: - Saw blade dimensions 400 x 35 x 2.0 mm - Cutting range - 90° round approx. 252 mm - flat approx. 250 x 160 mm - Square approx. 210 x 210 mm - 45° round approx. 160 mm - Flat approx. 150 x 150 mm - Material replenishment machine - max. opening width of the vise 265 mm - mitre-adjustable vise - Coolant device - Drive 400 V / 0.65 / 1.6 kW - Space requirement approx. W 1400 x H 950 x D 1700 mm - Weight approx. 600 kg

dimensions of saw-band: 5.000 x 34 x 1,1 mm working area: 310 / 520 x 310 mm cutting length min.: 8 mm cutting speed: 14 - 125 m/min total power requirement: 5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Material feed in any length (max. stroke 400 mm) Cutting diameter: around 360 mm, square steel 90°: 360 x 360 mm Cutting speed infinitely adjustable: 17 - 110 m / min. Conveyor Instruction manuals and additional saw blades available Further technical data on request Machine weight: approx. 2,400 kg

This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.

This Behringer HBE 511 A was manufactured in 2018. Ideal for precision metal cutting, this Metal Band Saw features a robust design and is well-suited for a variety of metalworking applications. Consider the opportunity to buy this Behringer HBE 511 A Metal Band Saw. Contact us for more information.

This Behringer HBP 410-723 G Metal Band Saw was manufactured in 2014. It features an automatic feed and discharge system, with a working area capacity up to 700 mm x 400 mm. Operating for approximately 5,900 hours, it supports a cutting speed of 20 – 140 m/min and is powered by a 4.0 kW saw drive. Consider the opportunity to buy this Behringer HBP 410-723 G Metal Band Saw. Contact us for more information about this machine.

This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine.

saw blade diameter: 450 mm cutting diameter: 150 mm turning speeds: 6 / 12 / 24 / 48 U/min capacity 90 degrees: flat: 240 x 70 mm capacity 60 degrees: flat: 170 x 70 mm capacity 30 degrees: flat: 120 x 70 mm capacity 90 degrees: round: 150 mm capacity 60 degrees: round: 145 mm capacity 30 degrees: round: 120 mm capacity 90 degrees: square: 140 x 140 mm capacity 60 degrees: square: 125 x 125 mm : 100 x 100 mm total power requirement: 3,6 kW weight of the machine ca.: 1150 kg dimensions: 1450 x 1610 x 1900 mm Semi-automatic mitre saw Equipment: - miter 30° / 60° / 90° - digital display - roller conveyor - Hydraulic clamping - Hydraulic saw blade feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details.

Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 2000 mm - from location D - 14943 Luckenwalde

serial number: 1106479 : 400 miter: ja cooling: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm capacity 90 degrees: square: 220 x 220 mm turning speed range:: 20 - 140 m/min saw band length: 3720 x 34 x 1.1 mm height of material-table: 825 mm coolant capacity: 80.0 l total power requirement: 2.5 / 3.5 kW weight of the machine ca.: 1500 kg range L-W-H: 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range via handwheel including analogue value display - automatic height adju ...

Cutting range round material: 220mm, cutting range flat material: 350mm/220mm, cutting range rectangular material: 220mm/220mm, saw band dimensions X/Y/Z: 3720mm/27mm/1mm, cutting speed: 120m/min, machine dimensions X/Y/Z: approx. 2400mm/1900mm/1500mm, weight: approx. 1350kg, operating hours: approx. 1450h. The drive cylinder must be sealed. Documentation available. An on-site inspection is possible.

cutting diameter: 450 mm band length: 740 mm stroke: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm -Measurements: see photos -Dimensions: 400/1130/H665 mm -Weight: 192 kg

Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible.

Offer 26077 Technical data approx.: - Control for fully automatic workflow - ( feed , incision speed. Replenishment machine, etc. ) - In a separate control panel - Cutting range at 90° around 260 mm - flat 300 x 260 mm - Smallest material dimensions round / flat 15 / 10 x 15 mm - Smallest section length 10 mm - Remnant length automatic operation / manual approx. 130 / 40 mm - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely variable 20 - 140 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Total drive power 400 V / 8.0 kW - Space requirement approx. W 2700 x H 1600 x D 2450 mm - Weight approx. 1800 kg - Roller conveyor 1000 mm

Qty. 1 Second-hand drilling, marking & deburring machine Manufacturer: Vernet Behringer Model: FG 2005 Built: 2010 Stopped: 2021 Plate size: 2000 X 1000 X 60 MM Max. load: 630 kg Tool changer: 8 Ø Drilling power: 16 kW, 160-4000 RPM Drilling diameter: max. 50 mm

Behringer HBP 430Year of manuf. : 1990 ____________Description:Technical Data:Cutting speed (stepless):17-110 m/minEquipment/Accessory:Rawmaterialfeed:Roller conveyor, additionalFinishedpart removal:Delivery tableChipmanagement:ChipconveyorCoolantmanagement:Coolant pumpBandsawcleaning:Wire brushFurther Equipment:Bundle tension

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg

Qty. 1 Second-hand rail hard metal saw with drilling unit Mfc.: Heller Type: TEK001-73-37 Saw carriage: 610 ? 710 mm Cutting speed ? 6 stages: 63-200 m/min. Cutting area: rail height up to: 200 mm rail width up to: 200 mm Feeding speed: 50 ? 1250 mm/min. Power: 50 kW Drilling unit Qty. 3 Drilling spindles Drill diameter: 12 ? 40 mm z-stroke: 630 mm z-drill stroke (adj.): 250 mm Tool changing stroke (adj.): 380 mm Drill spindle diameter: 60 mm Min. distance from the end of the rail: 33 mm Drill spindle distance - spindle 1-3: min. 228 mm max. 600 mm Drill spindle distance ? spindle 1-2: min. 114 mm max. 486 mm Drill feeding speed: 40 ? 200 mm/min. Motor power: 30 kW, 1420 RPM Revolution range: Qty. 9 225 ? 280 ? 350 ? 450 ? 560 ? 710 ? 900 ? 1120 ? 1400 RPM

Cutting length: min/max at 90 ° 330/5000 mm blade diameter: 450/500 mm kl.90°: 330 mm blade diameter cutting length: 450/500 mm Drive motor per unit: 2,2 kW Electr. Supply: 400 V, 5.2 kW Space requirements: 6760 x 1590 x 1700 mm weight: 1550 kg

Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg

Cutting area round / square 90°: 255 mm / 210 x 210 mm Cutting area flat 90°: 310 x 210 mm Cutting area round / square 45°, right: 220 mm / 210 x 210 mm Cutting area flat 45°, right: 220 x 200 mm Cutting area round / square 45°, left: 230 mm / 200 x 200 mm Cutting area flat 45°, left: 230 x 200 mm Cutting area round / square 60°, right: 135 mm / 135 x 135 mm Cutting area flat 60°, right: 135 x 135 mm Sawband dimensions: 2750 x 27 x 0.9 mm Cutting speeds: 35 / 70 m/min Motor recording power S6 40%: 2.2 kW Working height: 930 mm Delivery: - Saw band - Material stop - Manometer (band voltage) - Saw band hard metal guides - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

Saw blade diameter: 400 mm cutting capacity at 90 ° round: 130 mm cutting capacity at 90 ° square: 200 x 80 and 315 x 40 mm cutting capacity in MITRE at 45 ° square: flat/vertically 180 x 70 / 100 x 60 mm cutting speed: 19/28 m / min drive motor: 380 V, 1.7/2,6 kW space: 1100 x 1050 x 1620 mm weight: 850 kg

Standard equipment torsion-resistant, robust cast-iron saw frame driven shaving brush powerful industrial worm gear motor automatic shutdown after cutting end mechanical saw band tension with electrical band breakage monitoring Quick-release vice, movable Hydr. Saw frame lowering with rapid response function (infinitely adjustable) electric coolant pump Precision carbide saw band guides, ground (adjustable) large-sized round support table, with miter cuts, miter indicator (scale) to the operator side direct switching from manual operation to downing mode easily removable chip collecting tray Material stop 500 mm with scale incl. saw band combing gearing 4/6. Techniche Data Motor three-phase current 400 V, pole switchable 1.1/1.5 kW Saw band Dimensions 2720 x 27 x 0.9 mm Flywheels 300 mm Cutting speed 40/80 m/min. Vice-height span 275 mm Working height 978 mm Weigh ...

Delivery time immediately from stock! Motor three-phase current 400V with frequency converter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Band saw blade dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency converter Digital speed display Stepless belt speed Balanced intervertebral discs Hard rubberized treads Hardened and ground guide jaws LED task light Height-adjustable guide arm Machine colour RAL 7005 / RAL 7035 12-month warranty for single-shift operation

MKS 315 N Metal cutting circular saws Motor: 1.5/2.2 of kW 50 Hz 400V Speeds: 40/80 1/min Span Vice: 120 mm Saw blade diameter: 315 mm Infeed height incl. pedestal: 1015 mm Dimensions: 1000 x 1150 x 1475 mm Weight: 165 kg G & pieces 3620303SET

Cutting range 90°, round: x 64 mm Saw blade: 250 x 2.5 mm Engine power: 1.5 kW Connection: 400 V Weight, approx.: 110 kg Standard: - Saw blade of 250 x 2.5 mm - Base - CE

Cutting speeds: 40/80/min Mitre range: left up to 45° / right up to 60° The saw frame is brought to the starting position by hand. The lowering speed is controlled by a throttle valve (on the countersink cylinder) and as soon as the saw frame has reached the end position, the belt run switches off. You don't have to stand by the machine when sawing. The saw has an electric cooling water pump and a service has been carried out on the saw. The vice has a quick-release device Options: 1x saw blade 2720x27x0.9mm Number of teeth of your choice - from 5 saw blades 5% - from 10 saw blades 10% 5kg coolant concentrate 10kg coolant concentrate

Cutting range 90°, round: 225 mm Cutting range 90°, square: 200 x 200 mm Cutting range 45°, round: 160 mm Cutting range 45°, square: 160 x 160 mm Cutting range 60°, round: 100 mm Cutting range 60°, square: 100 x 100 mm Saw band: 2480 x 27 x 0.9 mm Cutting speeds: 45 / 90 m/min Engine power: 1.5 kW Voltage: 400 V Delivery - BiMetal saw band 2480 x 27 x 0.9 mm, 6/10 ZpZ - Carbide guides (4 jaws) - Adjustable workpiece stop 0.5 m - Manometer for belt tension - Vice with quick release - Integrated coolant equipment - Hydraulic iron lowering - Motor circuit breaker - Automatic final shutdown - Base

Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm

Overhaul year 2020 Built 1995-2019 Saw blade 160 - 200 mm Drive power saw motor 2.2 KW Speed Saw blade 1,500 -3,750 min-1 Cutting speed Saw blade 750 - 3350 m/min Saw height control infinitely adjustable fully electronic Working area square 90° max.: 50 x 50 mm Working range flat 90° max.: 110 x 50 mm Working area Around 90° max.: 50 mm Supply length Pneumatics 2.5 - 350 (single stroke) 5 - 700 (double stroke) Supply length AC Servo 2.5-9999 mm (optional) Supply supply. Servo-controlled replenishment unit 500 mm/s Compressed air connection 6 bar Weight (saw) approx.: 600 Kg Dimensions LxWxH (saw without attachments)approx.: 1400mm x1000mm x1600mm Technical Description Pressta Eisele Profilma 200 Retrofit Pressta Eisele Profilma 200 Retrofit Fully automatic high-performance sawing machine for non-ferrous metals and material The machine is technically as well as ...

Saegebaender Roentgen, new

Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg

CNC – controlled two-head double miter circular saw machine for the rational cutting of profiles made of aluminium – non-ferrous metals and various plastics. The machine can be used for single cutting – to saw the profile with two saw heads at the same time – or in automatic mode – here the two-head saw becomes a single-head saw The PKM 500 DG model is available in two versions – Version A – electrical / electronic miter adjustment of the saw heads, miter angle infinitely programmable between +/- 20°, CNC control with color graphics – profile drawings can be read as DXF file – remote maintenance via TeamViewer – software for wing cutting. Version B - pneumatic miter adjustment of the saw heads to preset stops, miter angle infinitely programmable between +/- 20°, CNC control with simple color graphics with the possibility to create cutting lists. Saw blade ...

IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills  ...

oven 650 inner 1x1x1.2m (possible various size) t max 650 PLC Tiefofen zum Homogenisieren von Walzbarren Wärmezubehandelnde Barren werden auf einer Stirnseite stehend mittels Krananlage und Zangeneinrichtung in den Ofen eingesetzt. Die Erwärmung der Barren wird bei mehrreihigem Einsatz durch Hochkonvektion mit entsprechend angeordneten Düsen und Düsenkanälen gleichmäßig erwärmt. Nach Ablauf der Homogenisierungszeit wird die Barrentemperatur auf Walztemperatur abgesenkt und die Barren stehen für die einzelne Abnahme im Walz-Takt zur Verfügung. Die Öfen können direkt und indirekt Gas oder elektrisch beheizt ausgeführt werden. Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Ofenanlagen zum Glühen von Aluminium Die Bandbunde werden mit Ihrer Achse horizontal in den Ofen eingelegt. Die Aufnahme er ...

Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...

Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg

Very high-quality CNC – controlled two-unit double mitre precision circular sawing machine (heavy version - 2,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale) For precise and rational cutting even of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 370 mm / largest section length 6,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Three CNC axes, electronic inclination of the saw units infinitely variable over the entire inclination range. SCHNEIDER® feed motors and electronic motor controllers. CNC control with Windows 10 operating system and 10.4" color di ...

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diame ...

UKM 600 DG High quality semi-automatic under-table double miter circular sawing machine, for cutting profiles and solid material made of aluminum – non-ferrous metal – plastics – wood and other soft materials Largest saw blade diameter 600 mm Cutting range - 0° - 400 x H 135 mm, 245 x H 100 mm, 190 x 190 mm - 45° - 160 x H 100 mm, 145 x 145 mm Saw blade speed 2,800 rpm Stepless miter adjustment + 10°/-170° with grid points at +/- 45° and 0° Saw blade drive power 3 kW Dimensions approx. 1.1 x 1.2 m x H 1.65 m Weight approx. 310 kg

Machine Type: Circular Saw Manufacturer: Kaltenbach Type: SKL 350 Year of construction:- Condition: used Offer will only be sent if a complete imprint is provided! Price 1.190 Euro incl. VAT Location Warstein , Germany Reference M-KAL-0724 DESCRIPTION We offer you a used circular saw from the manufacturer Kaltenbach. Technical data will follow. Availability: from 01.08 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Very high quality under-table double miter circular saw machine with manual saw blade feed – for cutting profiles and solid material made of aluminium – non-ferrous metal – plastics – wood and other soft materials Optionally available with roller conveyor and manual measuring stop with digital display. Largest saw blade diameter 620 mm Cutting Area - Examples - 90° - 130 mm x H 125 mm 90° - 80 mm x H 145 mm 45° - 100 x H 130 mm Infinitely variable miter adjustment +/- 20° Saw blade drive power 2.2 kW Dimensions approx. 0.9 x 1.2 m x H 1.6 m (with open protective cover) Weight approx. 350 kg

S131GH Metal band saw Motor: 230V 1.1kW 50Hz Feed infinitely adjustable Band saw blade speed: 22/ 31/ 55 m/min Band saw blade 1638x13x0,65 mm Cutting angle -45° to 60° Dimensions 1085 x 498 x 978mm Net weight 78kg G&STÜ-3300131

Technical data: SEGA BIANCO MOD. 350 UNDOCUMENTED

YOC 1994 Saw blade diameter (mm): 400 Cutting speeds (m/min): 13/26, 10/20,15/30 Engine power (kW) 1.7 /2.6 Working range approx. 90° / 45°: 130 Working range square 90° / 45°: 120 / 110 Working range flat steel 90° / 45°: 305X 40 / 245 x 30 Working range standing 90° / 45°: 120 X 55 Dimensions LxWxH (mm): 800 x 1070 x 1780 Weight (kg): 820 Work carried out: Replaced cable to motor, cooling water pump, and limit switch in the engine room Feed cylinder newly sealed Transmission oil replaced Hydraulic tank cleaned / oil and filter replaced Limit switch in the machine room replaced Other settings made

Cutting range round 90°, tube Ø: 95 mm Cutting area flat 90°, profile: 110 x 65 mm Cutting range approx. 45°, tube Ø: 90 mm Cutting area flat 45°, profile: 85 x 75 mm saw blade Ø: 315 mm Motor power: 1.1 / 1.8 kW Connection: 400 V Weight, approx.: 150 kg Equipment: - Saw blade Ø 315 - Vice with quick clamping - Pole-changeable motor with two speeds - Separate coolant pump with its own tank - Material stop - Roller block on the feed side -Underframe -CE

Offer 24419 Specifications: - Roll diameter 520 mm - Projection 510 mm - Max. passage height 420 mm - Table size 750 x 800 mm - Table left + right swivel 15 / 30 ° - Table height from the floor 1020 mm - Saw blade length 4120 - 4200 mm - Saw band width 20 - 25 mm - Stepless cutting speed - level 1 18 - 160 m/min - Stage 2 240 - 2280 m/min - Pneumatic connection 6 bar - Drive 400 V / 5.5 kW - Weight approx. 1100 kg - Space requirement approx. W 1200 x H 2200 x D 900 mm - with: - table feed - Saw blade welder in machine stand -Grindstone - Scissors + air pump -Lighting

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Key data: 255 mm

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table "plateau" that rotates with the mitre of the saw blade, guaranteeing excellent support for the material t ...

Key data: 1 mm, 6300 mm

LHS Lagertechnik, supplier of shelving systems and general storage technology. Due to a customer's production closure, we are selling a KASTO HBA 420 band saw. In this ad, you will buy as follows: - 1 piece KASTO band saw HBA 420 - Year of construction: 1990 - Serial number: 17809 - Belt length: 6,300 mm - Band height: 41 mm - Band thickness: 1.3 mm -Conveyor - Connection voltage: 400 volts - Sale in as-is condition without guarantee and warranty - Loading with forklift, shipping and self-collection possible Sale in as-is condition without guarantee and warranty. Loading by forklift, shipping and self-collection possible.